Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Seed

Active
W911S226U3853Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Seed, solicited under number W911S226U3853, is a combined solicitation issued by the Department of Defense through the Office of W6QM Micc-Ft Drum, with a focus on small business set aside under SBA guidelines as a total set aside. It was posted on July 29, 2026, with a strict response deadline of July 31, 2026, at 8:30 p.m. Eastern Time. The North American Industry Classification System code 325314 identifies the scope as related to industrial chemical manufacturing, specifically indicating a need for seed-level technology or product development tied to YTC ITAM 2026 requirements. Performance is anticipated to occur at a location with zip code 98901, though the specific city and state are not defined in the details provided. The primary point of contact is Garry Rummer, reachable via email at garry.d.rummer.civ@army.mil or phone at 509-225-8671, stationed at Fort Drum, New York, 13602-5220. All interested parties must respond through the official SAM.gov platform using the provided UI link before the deadline to be considered.

General Info

Seed contract for small business set aside in industrial chemical manufacturing, deadline July 31, 2026, SAM.gov submission required.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

325314 - Fertilizer (Mixing Only) ManufacturingView NAICS

Place of Performance

W50FL6970 Firing Center RD BLDG# 1805Yakima WA 98901, NY, 98901

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Drum
Contacts1 person available
OfficeFORT DRUM, NY, 13602-5220, USA
Organization / Agency
Department Of Defense → W6QM Micc-Ft Drum
View Agency Profile
Office AddressFORT DRUM, NY, 13602-5220, USA
Contacts
Garry Rummer
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Amended to include set aside code. YTC ITAM 2026 Seed requirement

Similar Contracts

Same NAICS industry code

NAICS: 325314
New
Federal
Supply of Dry Bulk Fertilizer (12-3-14 Formula)The contract calls for the supply of 26 tons of dry bulk fertilizer formulated to a precise 12% nitrogen, 3% phosphate, and 14% potash composition, ensuring adherence to defined technical specifications and compliance with Buy American requirements. All materials must meet exacting quality standards to fulfill performance expectations for agricultural applications. The opportunity is structured as a subcontract under a Total Small Business Set-Aside, designated for small business concerns as defined by the SBA, and falls under NAICS code 325314 for fertilizer manufacturing. The response deadline is set for July 31, 2026, at 4:00 PM, with bids required to be submitted before this cutoff. Performance of the contract is to take place in Fort Pierce, Florida, with a zip code of 34945, though the specific delivery location or further logistical details are not outlined. The contracting entity is the USDA ARS AFM APD under the Department of Agriculture, and the opportunity is publicly accessible via a SAM.gov link for interested small businesses to review and submit proposals.
USDA Ars Afm Apd

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 325314
New
Federal
Dry Bulk FertilizerThis solicitation, numbered 1232SA26Q1090, is a combined synopsis and request for quotation for 26 tons of dry bulk fertilizer with a chemical formulation of 12-3-14 containing 2% magnesium, issued under FAR Part 12 as a commercial item acquisition. The contract is a firm fixed price arrangement with a performance period of 30 days from award, requiring delivery FOB destination to the USDA Agricultural Research Service facility in Fort Pierce, Florida. The requirement is set aside entirely for small business concerns under NAICS code 325314 with a size standard of 550 employees, and all responsible small businesses may submit quotations. The award will be made using the lowest price technically acceptable method, where quotations must meet all salient product specifications outlined in Attachment II, demonstrate acceptable past performance, and provide sufficient documentation to verify compliance. The offeror must be registered in SAM.gov with a valid Unique Entity ID and comply with all applicable small business regulations, including limitations on subcontracting and subcontracting plan requirements with specific liquidated damages provisions. The contract incorporates numerous mandatory clauses related to compliance, ethics, and operational standards, including requirements to adhere to federal anti-discrimination and DEI certification obligations under 452.203-70 and 452.203-71, which prohibit participation in DEI programs violating specific executive orders and carry potential liability under the False Claims Act for noncompliance. Security requirements mandate safeguarding of covered contractor information systems and prohibit data storage or processing outside the United States. Contractors are barred from using government data to train AI models, imposing unenforceable vendor terms on the government, or requiring the government to indemnify them. Subcontracting must comply with small business participation goals and subcontracting plan rules, with financial penalties for violations. Payment must be processed through the Department of Treasury’s Invoice Processing Platform, and the primary point of contact for the contracting office is Marian Dyson of the USDA ARS Acquisition and Property Division. All deliverables must include product literature verifying chemical composition and release profiles, with inspection and acceptance taking place at the destination site upon delivery using a 20-ton four-hopper trailer. Any quotation must be submitted electronically by the July 31, 2026 deadline and comply with all representations and certifications incorporated by reference in the solicitation.
USDA Ars Afm Apd

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 325314
SLED
Lambert LM-AP Fertilizer Supply
Belle Isle

POSTED

19 days ago

DEADLINE

in 8 days
View Details
NAICS: 325314
Federal
Brand Name Holganix Fertilizer Riverside National Cemetery -- 8720The Department of Veterans Affairs, through its National Cemetery Administration Pacific District, is planning to procure two specific brand name fertilizers—HGX Pro Bio 800 Holganix and Blue Sky 21-0-0 Holganix—for use at the Riverside National Cemetery. This acquisition responds to the cemetery’s ongoing need for these Holganix products, which have demonstrated effective microbial and nutrient support. The procurement will be managed under a Request for Quote (RFQ) process, expected to open around August 15, 2025, and offers will only be accepted from Service-Disabled Veteran-Owned Small Businesses (SDVOSB) certified through the SBA. This opportunity falls under NAICS Code 325314 for Fertilizer Manufacturing, with a small business threshold of 550 employees. Only electronic copies of the RFQ and associated documents will be provided via sam.gov, and no physical copies will be issued. Interested contractors must be registered in the System for Award Management (SAM) and complete all necessary representations and certifications online. The award will be determined using the Lowest Price Technically Acceptable (LPTA) selection method. The contract’s point of contact is Roberto Escobedo, Contracting Officer, and all updates or amendments will be announced on sam.gov.
National Cemetery Administration (36C786)

POSTED

12 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

NAICS: 339999
New
Federal
Rocket PartsThe solicitation for rocket parts under contract number W911S26U3855 is a Small Business Set Aside, meaning only small businesses are eligible to compete, with the entire contract reserved for them. Issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, the requirement is classified under NAICS code 339999 for other miscellaneous manufacturing. The opportunity was posted on July 29, 2026, with responses due by August 5, 2026, at 8:30 PM Eastern Time, and the place of performance is associated with ZIP code 10996. This is a combined solicitation, potentially merging multiple procurement methods, and the primary point of contact is Jessica Kelley, reachable via phone at 845-938-4955 or email at jessica.l.kelley24.civ@army.mil. Interested vendors must submit proposals through the SAM.gov platform using the provided link.
All Other Miscellaneous Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333924
New
Federal
ECS 65 ForkliftsThe contract titled ECS 65 Forklifts, solicited under number W911S226U3789, is a Small Business Set Aside for total award, targeted specifically at small businesses, with a NAICS code of 333924 indicating industrial machinery and equipment manufacturing. The solicitation was posted on July 29, 2026, with responses due by July 31, 2026, at 4:00 PM Eastern Time. This is a combined solicitation, meaning it may involve both competitive and non-competitive procurement methods. The contracting office is located at Fort Drum, New York, under the Department of Defense, specifically managed by W6QM Micc-Ft Drum, and the place of performance is set at zip code 01434. The primary point of contact for inquiries is Guillermo Ramos, reached via email at guillermo.ramos1.civ@army.mil or phone at 609-562-7558. The amendment to this contract is solely intended to update the salient characteristics of the forklifts to ensure accuracy and alignment with current operational requirements.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333912
New
Federal
AMSA 21 Pressure WasherThe U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting offers for the AMSA 21 Pressure Washer under solicitation number W911S226U3856, a combined solicitation set aside exclusively for small businesses as defined by the Small Business Administration. The requirement is classified under NAICS code 333912, indicating it pertains to the manufacturing of other agricultural, construction, and mining machinery. The solicitation was posted on July 29, 2026, with a firm deadline for submissions on August 4, 2026, at 4:00 PM Eastern Time. The contract will be awarded and performed at a location with a zip code of 08640, though specific city and state details for performance are not provided. The primary point of contact for inquiries is Guillermo Ramos, reachable via email at guillermo.ramos1.civ@army.mil or by phone at 609-562-7558, and the official solicitation can be accessed through the SAM.gov portal.
Air and Gas Compressor Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335312
New
Federal
Boat EngineA 2-stroke, gasoline-powered, submersible, air-deployable outboard motor is being procured as a self-contained propulsion system for small craft, specifically qualified for CRRC airdrop configurations. The engine must feature through-hub exhaust, pull-start ignition, tiller-handle throttle control, rapid dewatering, and immediate operability after submersion. It must meet or exceed EPA 3-star emissions ratings on gasoline and be brand new, domestically manufactured, with active management in the DLA Federal Logistics System under a designated National Stock Number. The required service kit includes essential consumables such as a 10-foot fuel line with primer bulb, XD10 oil, universal motor flusher, fogging oil, and Salt-Away corrosion-removal concentrate with mixing unit to support fuel mixing, flushing, and long-term storage per manufacturer guidelines. The comprehensive service kit further includes a thermostat, thermostat cap gasket, anodes, spark plugs, fuel filter assembly and element, fuel line replacement kit, starter rope, stop switch lanyard, trim tab, water pump impellers, propeller assembly with hardware, thrust rod components, throttle wire, water pump replacement kit, and cowling strap replacement kit to ensure operational readiness and extended service life. The solicitation, identified as W911S226U3858, is a Small Business Set Aside under NAICS 335312, issued by the Department of Defense via the Office at Fort Drum, New York, with responses due by August 5, 2026.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 321992
New
Federal
Prefabricate Warehouse OfficeThe contract awards the design, manufacture, delivery, and installation of a single prefabricated modular in-plant office measuring approximately 60 feet by 12 feet with a 10-foot interior wall height, tailored to accommodate an 8-station work layout with projecting privacy panels, 8 pallet staging zones, and a 5.5-foot clear central aisle. The contractor is responsible for providing all labor, materials, equipment, and transportation necessary to complete the project to specified requirements. This solicitation is a Small Business Set Aside—Total under NAICS code 321992, exclusively open to small business concerns as defined by the SBA. The opportunity was posted on July 28, 2026, with a response deadline of August 4, 2026, at 8:55 PM. The contracting activity is under the Department of Defense, specifically the W6QM Micc-Ft Drum office located at Fort Drum, New York, with the place of performance designated as ZIP code 00954. Primary point of contact for inquiries is Ricardo Lopez-Hernandez, reachable via email and phone provided in the contract data.
Prefabricated Wood Building Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333120
New
Federal
Forestry Track LoaderThe U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting bids for a Compact Forestry Track Loader under solicitation number W911S226U3842, with a posted date of July 28, 2026, and a response deadline of August 4, 2026, at 4:30 PM Eastern Time. This is a combined solicitation designated as a Small Business Set Aside, total, meaning only small businesses can compete, and the North American Industry Classification System code is 333120, which covers the manufacturing of other construction machinery. The contract is managed by the Office located at Fort Drum, New York, with a ZIP code of 13602-5220, and the primary point of contact is Henry Ingram, reachable via phone at 270-798-2649 or email at henry.l.ingram4.civ@army.mil. The place of performance is identified with ZIP code 42223, though the specific city and state are not provided, indicating delivery or service location may be elsewhere than the office address. The procurement is for specialized forestry equipment designed for tracked mobility, likely intended for use in challenging terrain for land management or military-related operations, and bidders must comply with all federal acquisition regulations and small business certification requirements.
Construction Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 922160
New
Federal
Firefighter Bunker Gear. The U.S. Department of Defense, through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, is soliciting bids for Firefighter Bunker Gear under solicitation number W911S26U3698, which was posted on July 28, 2026, with a response deadline of August 4, 2026. This procurement is a combined solicitation exclusively reserved for small businesses as defined by the Small Business Administration, ensuring participation by qualified small business entities under the Total Small Business Set-Aside provision. The North American Industry Classification System code for this opportunity is 922160, indicating its alignment with public order and safety activities, and the goods are intended for use by firefighting personnel supporting military operations. The place of performance is indicated as 22060, though specific geographic details are not fully provided, and delivery requirements will align with operational needs tied to the defense installation. Primary point of contact for inquiries is Aubrey Hoover, reachable via phone at 443-752-7828 or email at aubrey.j.hoover.mil@army.mil, with Eric Martinez serving as the secondary contact at 570-401-9878 or eric.martinez8.mil@army.mil. All potential bidders must comply with federal acquisition regulations and ensure their proposals meet technical specifications for firefighter personal protective equipment. The official solicitation and additional details can be accessed through the SAM.gov link provided in the contract data.
Fire Protection

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
Federal
Plate ReaderThe contract specifies the procurement of a high-performance plate reader capable of acquiring real-time data through multiple detection modes including monochromator-based fluorescence, UV/Vis absorbance, and luminescence. The instrument must feature a linear variable monochromator with tunable bandpasses up to 100nm and a tunable dichroic mirror enabling an air-based light path without fiber optics or light guides. Fluorescence measurements require auto-ranging detector sensitivity and gain capable of handling signals exceeding 760 million counts, with dynamic range adjustments completed in under 0.1 seconds. Absorbance measurements must be performed using a dedicated diode array spectrometer, not a monochromator, capturing a full UV/Vis spectrum from 220nm to 1000nm at 1nm resolution in less than 0.5 seconds with simultaneous wavelength acquisition. The optical head must be heated to maintain uniform temperature conditions in microplate wells during detection, with a temperature controller capable of reaching up to 45°C. The system must include bottom reading capability, two automated reagent injectors for kinetic and flash luminescence assays, and an atmospheric control unit with software-controlled regulation of CO2 and O2 levels to support cell culture at 5% CO2. Software for data visualization and analysis must be included. This procurement is part of a Small Business Set Aside under the SBA program, identified by NAICS code 334516, and is issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The solicitation number is W911S226U3818, posted on July 28, 2026, with a response deadline of August 6, 2026. The place of performance is listed as zip code 10996, and the primary point of contact is Carl Lundell, reachable at carl.lundell@westpoint.edu or 845-938-8298. The instrument must meet all technical specifications with no compromises in performance, particularly in speed, precision, and environmental control, to support advanced biological and biochemical research applications under controlled conditions.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 333924
New
Federal
Customized Tactical Fitness Trailer SystemThe Customized Tactical Fitness Trailer System solicitation, identified by number W911S26U3804, is a combined solicitation issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. The opportunity is exclusively set aside for small businesses under the SBA’s Total Small Business Set Aside program, with the NAICS code 333924 indicating classification under Other Commercial and Industrial Machinery and Equipment Manufacturing. The solicitation was posted on July 28, 2026, with responses due by August 6, 2026. The contract includes amendments adding a set aside code and updating the PSC code to reflect current procurement requirements. The place of performance is listed with a zip code of 20755, and all deliverables are expected to meet the customized tactical fitness specifications outlined in the solicitation. The primary point of contact for inquiries is Jael Varela, reachable via email at jael.e.varela.mil@army.mil or by phone at 502-626-1284. Additional details and submission instructions are available through the official SAM.gov workspace link.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 333415
New
Federal
PORTABLE CHILLERA 60-ton portable chiller, model CGAM060 by TRANE, is being procured under a total small business set-aside solicitation with the number W911S226U3839, issued by the Department of Defense through the Office of W6QM Micc-Ft Drum in Fort Drum, New York. The unit is air-cooled, features a steel frame with integrated fork pockets and lifting lugs for easy transport, and includes grooved fittings, 50-foot hoses in both 4-inch and 6-inch sizes, 100-foot power cables, leveling corner jacks, and a factory-installed circuit breaker to ensure operational readiness. Only one unit is required, and the item falls under the NAICS code 333415 for refrigeration and air conditioning equipment manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 6, 2026, at 8:00 PM Eastern Time. The contract is classified as a combined solicitation and is restricted to small businesses as defined by the SBA. The place of performance is linked to Fort Drum, NY, with the primary point of contact being Juan Ponce, reachable via phone at 315-772-0754 or email at juan.c.ponce.civ@army.mil. All bids must comply with federal procurement regulations and meet the technical specifications of the TRANE CGAM060 unit as outlined in the solicitation.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
Federal
Gate valveThe contract is for the procurement of gate valves under solicitation number W911S226U3615, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is a combined solicitation set aside exclusively for small businesses as defined by the Small Business Administration, identified by the NAICS code 332911 which pertains to other metal valve and pipe fitting manufacturing. The opportunity was posted on July 28, 2026, with a response deadline of August 4, 2026, at 6:00 PM Eastern Time. The place of performance is listed with a zip code of 74501, indicating the delivery destination is likely in Oklahoma. Mike Fabry serves as the primary point of contact, reachable via email at mike.j.fabry.civ@army.mil or by phone at 918-420-6580. Interested parties must submit responses through the SAM.gov portal using the provided UI link to participate in this procurement opportunity.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
Federal
LabbotThe Labbot contract under solicitation number W911S226U3820 is a Small Business Set Aside aimed at acquiring an advanced analytical instrument capable of simultaneously acquiring real-time data across multiple modalities including fluorescence, absorbance, light scattering, and pH/conductivity measurements. The instrument must enable automated titrations and support precise control over temperature and mixing speed to study complex protein behaviors such as phase separation, aggregation, interactions, thermal stability, ion binding, and pH stability. It must be designed for reproducibility across users, operate without proprietary consumables to minimize running costs, and include comprehensive software for experiment setup and data collection. The system is intended for use in laboratory environments where consistent, high-fidelity results are critical, and must be deployable under the specified performance conditions with no geographic restrictions beyond the listed procurement context. This contract is issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a primary point of contact at Carl Lundell, reachable via email and phone. The solicitation was posted on July 28, 2026, and responses are due by August 7, 2026. Classified under NAICS code 334516, the procurement is restricted to small business concerns as defined by the Small Business Administration, ensuring opportunities are reserved for eligible small entities. The instrument must meet all technical requirements without reliance on vendor-specific consumables and must be capable of performing fully automated experiments across a broad range of biophysical conditions to provide actionable insights into protein dynamics.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details