Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Selective Laser Sintering (SLS) 3D Printing System

Active
26-58097International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Research Council Canada is seeking a new Selective Laser Sintering (SLS) 3D Printing System through an open Request for Proposal with solicitation number 26-58097, published on August 7, 2026, and with bids due by September 2, 2026. The system must be delivered to Mississauga, Ontario, with all deliverables received no later than November 30, 2026. The award will be made to the bidder who meets all mandatory technical criteria and offers the lowest price, within the scope of the Canadian Free Trade Agreement. Proposals must be submitted electronically to the NRC Bid Receiving Unit and may be submitted in either English or French. The procurement is governed by Canada’s Integrity Regime, and bidders are responsible for regularly checking the Government Electronic Tendering Service for any amendments, as no direct notifications will be sent. The procuring office is Helen Tran, Senior Procurement Officer, and all correspondence should be directed through the provided contact details. Canada encourages participation from Indigenous businesses through the Indigenous Business Directory, which may provide access to contracts set aside under the Procurement Strategy for Indigenous Businesses, though this specific solicitation does not specify a set-aside. The NRC retains the right to negotiate with any supplier and has made clear that it will not be held liable for any information obtained from third-party websites or for bidder oversights regarding updates posted exclusively on GETS. All relevant documents and notices are available through the Canada Buys portal, and while the agency does not provide NAICS codes or set-asides, the process remains open and transparent with emphasis on compliance, technical adequacy, and cost-effectiveness.

General Info

NRC seeks lowest-priced SLS 3D printer by Sept 2, 2026, for delivery to Mississauga by Nov 30, 2026.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

N/A

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(4)

RFP 26-58097 Selective Laser Sintering (SLS) 3D Printing System

PDF•rfp

26-58097 New Selective Laser Sintering (SLS) 3D Printing System RFP

PDF•rfp

Solicitation 26-58097 for 3D Printing System by Selective Laser Sintering

PDF•rfp

RFP 26-58097 Système d'impression 3D par frittage sélectif au laser (FSL)

PDF•rfp

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
View Agency Profile
Office AddressN/A
Contacts
Helen TranContracting Authority
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Title: New Selective Laser Sintering (SLS) 3D Printing System Solicitation Number: 26-58097 Publication Date: August 7, 2026 Closing Date and Time: September 2, 2026 Trade Agreements: Canadian Free Trade Agreement (CFTA) (formerly Agreement on Internal Trade [AIT]) Region of Opportunity: Canada Region of Delivery: Mississauga, ON GSIN: N3695 Notice Type: Request for Proposal (RFP) Tendering Procedure: Open Description: The National Research Council Canada (NRC) requires a New Selective Laser Sintering (SLS) 3D Printing System. All the deliverables must be received on or before November 30, 2026. Basis of selection: The responsive bidder who meets all Mandatory Technical Criteria and offers the lowest price will be recommended for contract award. Tenders must be submitted to the NRC Bid Receiving Unit at: NRC.BidReceiving-ReceptiondesSoumissions.CNRC@nrc-cnrc.gc.ca Refer to the attached tender documents to obtain further information. Canada retains the right to negotiate with any supplier on any procurement. Documents may be submitted in either official language of Canada. Procuring Office: Helen Tran, Senior Procurement Officer, NRC, 236-464-0827, helen.tran@nrc-cnrc.gc.ca The NRC has adopted the Integrity Regime administered by Public Services and Procurement Canada. As a result, the integrity provisions are being applied in NRC contracting activities as outlined in this solicitation. Canada will make available Notices of Proposed Procurement (NPP), bid solicitations and related documents for download through the Government Electronic Tendering Service (GETS) at https://canadabuys.canada.ca/en/tender-opportunities . Canada is not responsible and will not assume any liabilities whatsoever for the information found on websites of third parties. In the event an NPP, bid solicitation or related documentation would be amended, Canada will not be sending notifications. Canada will post all amendments, including significant enquiries received and their replies, using GETS. It is the sole responsibility of the Bidder to regularly consult GETS for the most up-to-date information. Canada will not be liable for any oversight on the Bidder's part nor for notification services offered by a third party. Indigenous Procurement: The federal Indigenous Business Directory (IBD) is an online resource for all levels of government and the private sector to identify Indigenous business capacity. Having a business profile in the IBD will increase your company’s visibility and may provide additional business. A profile in the IBD can also allow you to compete for federal government contracts that are set-aside for Indigenous businesses through the Procurement Strategy for Indigenous Businesses. For more information and to review eligibility criteria and register, visit: www.canada.ca/indigenousbusinessdirectory.

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 333515
New
International
Fiber Laser Cutter for Aluminum and Copper
Solicitation # 26-58021
The National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system capable of reliably cutting aluminum and copper for battery prototype components through solicitation 26-58021, with a submission deadline of July 27, 2026 at 14:00 EDT. The system must feature a fiber-type laser with a minimum power output of 3000W and a 10:1 operational turn-down ratio, a work area between 400x300mm and 635x635mm, a Z-axis of at least 50mm, and positioning precision of 0.1mm or better. It must cut 4.064mm aluminum and 3.175mm copper at speeds of at least 1m/min, include an auto-tracking laser head, a fully enclosed work area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system against back-reflected laser energy. The scope includes delivery, installation, commissioning, and training, with all deliverables required to be received at NRC Building U91, 2320 Lester Road, Ottawa, ON K1V 1S2. The system must be delivered under Incoterms® 2020 Delivery at Place (Vancouver, BC), with the vendor responsible for all shipping, customs, and duty costs. Only Canadian suppliers are eligible under the Policy on Reciprocal Procurement, and offers must be submitted electronically in three distinct sealed attachments labeled Technical Offer, Financial Offer, and Forms, with a total message size not exceeding 10MB; compressed files, links, or physical submissions are prohibited. The contract is awarded on the basis of the lowest evaluated price among compliant offers, with all mandatory technical requirements identified with the word “must” serving as pass/fail gates; failure to meet these disqualifies an offer from financial review. Offerors must submit sample cuts within 15 business days of receiving materials, accompanied by a detailed cutting report. Acceptance of the system by Canada requires a formal written request from the contractor, followed by a 30-day inspection period; rejection allows Canada to require corrections at the contractor’s expense without additional cost. Payment terms specify undisputed invoices will be settled within 30 days of receipt in acceptable form, with 15% withholding for non-resident contractors unless a CRA waiver is provided. Invoices must be emailed
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334513
New
International
Bio-capacitance probe system
Solicitation # 26-58103
The National Research Council of Canada is seeking a four-probe bio-capacitance system capable of real-time measurement of bio-capacitance in up to four bioreactors simultaneously, enabling continuous estimation of viable cell concentration and derivation of critical cell culture parameters such as cell size, internal conductivity, and critical frequency through multi-frequency analysis of the β-dispersion signal using the Cole–Cole α model. The system must feature probes compatible with the agency’s diverse bioreactor platforms and support real-time data capture via both OPC-UA and 4–20 mA communication protocols to enable direct integration into process control loops. All hardware must be new, off-the-shelf, non-counterfeit, and fully traceable to the original manufacturer, with clear unencumbered title guaranteed by the contractor. The system must be delivered within 12 weeks of award to the NRC facility in Montreal under DAP Incoterms®2020 delivery terms, accompanied by technical documentation in hard and digital formats, operation software, a calibration signal simulator (optional), and guaranteed spare parts availability for five years alongside one year of technical support. The solicitation follows a Low Price Technically Acceptable (LPTA) evaluation methodology, where offerors must first meet all mandatory technical requirements—detailed in Annex C and E—to qualify for price consideration, with award going solely to the lowest-priced compliant proposal. Proposals must be submitted electronically in two separate attachments—technical and financial—via email only, with a total file size not exceeding 10 MB, and must include completed Offer Submission and Declaration Forms adhering to the Federal Contractors Program for Employment Equity requirements. No security clearance is required, and the contractor must certify compliance with ethical procurement standards, prohibitions on contingency fees, international sanctions, and forced labor laws. All contract records must be retained for seven years post-final payment, and invoices must be submitted electronically to a designated NRC email, with payment processed via direct deposit, EDI, or wire transfer. Packaging must comply with Canadian standards and emphasize environmentally preferable materials, while labeling must include item descriptions, quantities, contract ID, and inspection voucher information. Acceptance of goods will occur at the delivery site within 30 days of notification, with the government retaining full authority for inspection and rejection of non-conforming systems.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 238150
New
International
M50 South Window Replacement Project
Solicitation # 26-58058
The M50 South Window Replacement Project, solicited under number 26-58058 by the National Research Council of Canada, requires the replacement of 20 windows and associated masonry repointing at Building M-50 located at 1200 Montreal Road in Ottawa, Ontario. The work includes removing and replacing 11 existing windows and frames, installing nine new insulated glass units, providing insulation and sealant, and fitting new roller shade blinds. All deliverables must be completed and received by December 31, 2026, and performance is restricted to Canadian suppliers due to the Policy on Reciprocal Procurement, with non-Canadian bids automatically rejected. A mandatory site visit is required on either June 29 or June 30, 2026, at 10:00 a.m. ET, and failure to attend and sign the attendance sheet will result in bid disqualification. Proposals must be submitted electronically via email no later than 2:00 p.m. EST on July 30, 2026, with a maximum size of 10 MB, in either English or French, and without ZIP attachments or external links. Bidders must disclose all subcontractors and suppliers, provide integrity declarations, and confirm compliance with government policies on inadmissibility and suspension. The contract imposes strict compliance with construction, safety, and security protocols. All personnel, including subcontractors, must meet mandatory security clearance requirements to access the site, and access to PROTECTED or CLASSIFIED information is strictly prohibited. The contractor is responsible for maintaining comprehensive insurance coverage including Commercial General Liability and Umbrella/Excess Liability, and must develop a Site Specific Safety Plan addressing hazards such as fire, flooding, and pandemics. Safety compliance is enforced through an on-site safety board displaying project notices, emergency schematics, and Ontario Health and Safety Act information. Materials must be delivered in original factory packaging, labeled with manufacturer details, stored off the ground in dry, well-ventilated areas, and protected from damage, with painting materials kept away from heat sources. Quality assurance demands manufacturer-certified product documentation, certified test reports including sand gradation per CAN/CSA-A179, and shop inspections for glass. A mock-up including glazing, air barriers, and vapor retarder seals must be constructed and inspected for 24 hours prior to proceeding with full installation. Final acceptance by NRC is required before releasing affected work areas. Payment
Glass and Glazing Contractors

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541611
New
International
Technical Documentation and Compliance ReportingThe contract pertains to the development and management of technical documentation, including calibration certificates, validation reports, and compliance records, all aligned with Good Manufacturing Practices, U.S. Food and Drug Administration regulations, and 21 CFR Part 11 standards for electronic records and signatures. The work requires rigorous adherence to international regulatory frameworks to ensure the integrity, traceability, and audit-readiness of all documented processes, primarily supporting activities within the Canadian government’s scientific and technical operations. The subcontractor must possess demonstrated expertise in generating compliant documentation that meets stringent quality and data integrity requirements across pharmaceutical, biotech, or laboratory environments. The opportunity is posted under the National Research Council of Canada within the Government of Canada framework, specifying North American Industry Classification System code 541611 for scientific and technical consulting services. The contract is categorized as a subcontract, with a response deadline of August 25, 2026, and is open for bids through the Canada Buys portal. Performance of the work is expected to occur in Canada, though no specific city or address is provided. The solicitation does not indicate a set-aside status or targeted business classification, and no point of contact is listed, implying inquiries should be directed through the official tender portal.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 17 days
View Details
NAICS: 423490
New
International
Calibration Tool and Standard SupplyThe contract involves the supply and ongoing maintenance of traceable calibration tools, reference standards, and portable calibration kits required for on-site service operations at the Canadian Trade and Measurement Facility. These instruments must meet stringent accuracy and traceability requirements to ensure reliable measurements during field calibrations and quality assurance activities. The contractor is responsible for delivering a comprehensive suite of equipment that is fully documented, certified, and maintained in accordance with national and international metrological standards. The contract is classified as a subcontract under NAICS code 423490, issued by the National Research Council of Canada as part of the Government of Canada’s procurement framework. The opportunity was posted on August 6, 2026, with a response deadline of August 25, 2026. Performance will be carried out at various on-site locations across Canada, with no specific city or regional restrictions beyond the country’s borders. While no set-aside provisions are specified, participation is open to qualified suppliers capable of meeting the technical, logistical, and compliance demands of supporting national calibration infrastructure.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 17 days
View Details
NAICS: 811310
New
International
Calibration of New or Unlisted EquipmentThe contract involves performing ad-hoc calibration services for new or previously unlisted instruments that are introduced during the contract term, with all calibration activities required to meet Good Manufacturing Practice (GMP) standards. This includes the assessment and validation of each instrument to ensure accuracy, reliability, and compliance with regulatory expectations, particularly in environments where precision and documentation are critical. The work must be responsive to dynamic equipment additions and conducted without prior listing, implying a need for flexible, on-demand technical expertise and thorough documentation protocols. This subcontract is issued under the North American Industry Classification System code 811310 and is managed by the National Research Council of Canada, part of the Government of Canada. The opportunity was posted on August 6, 2026, with a response deadline of August 25, 2026. Performance is expected to occur across Canada, reflecting a nationwide scope of work. The nature of the requirement suggests the need for qualified service providers with demonstrated experience in GMP-compliant calibration, the ability to rapidly evaluate unknown or non-standard instruments, and a robust quality management system capable of handling unplanned calibration events while maintaining audit readiness.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 17 days
View Details
NAICS: 811310
New
International
Emergency Calibration ServicesThe contract titled Emergency Calibration Services seeks qualified providers to deliver on-demand emergency calibration support in response to equipment failures or compliance incidents, with a strict requirement to respond within four hours of notification. This subcontract is issued by the National Research Council of Canada under the Government of Canada and is governed by the NAICS code 811310, which pertains to commercial and industrial machinery and equipment repair and maintenance. Services must be available nationwide across Canada, ensuring timely intervention wherever equipment malfunctions occur, especially in critical operational environments requiring regulatory compliance. Responses to this solicitation must be submitted by August 25, 2026, and the opportunity was posted on August 6, 2026. There is no set-aside classification specified, meaning all eligible entities may apply regardless of size or status. The place of performance is Canada-wide, and while no specific office address or point of contact is provided, all work must be executed in alignment with the urgency and precision required for emergency calibration scenarios. Interested parties are directed to the official Canada Buys portal for additional details and submission instructions.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 17 days
View Details
NAICS: 811310
New
International
Annual Calibration Services for Bio-Manufacturing EquipmentThe contract requires the annual calibration of 365 GMP-regulated instruments at the National Research Council of Canada’s Centre for Advanced Materials and Technologies, to be completed during two scheduled facility shutdowns each year. All calibration work must comply with FDA, GMP, and applicable Canadian regulatory standards to ensure the integrity and accuracy of bio-manufacturing equipment used in controlled environments. The services are critical to maintaining operational compliance and validating product quality within a regulated biomanufacturing setting. This subcontract is open for bid with a response deadline of August 25, 2026, and was posted on August 6, 2026, under NAICS code 811310 for measurement, testing, and calibration services. The performance location is within Canada, and the contracting entity is the Government of Canada through the National Research Council. There is no set-aside designation, and the opportunity is available to qualified vendors capable of meeting strict regulatory requirements and adhering to the timeline dictated by the facility’s shutdown schedule.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 17 days
View Details
NAICS: 811310
New
International
Calibration Services for (3) Years for the NRC- Clinical Trial Material Facility (CTMF) and Emergency Calibration Services
Solicitation # 26-58107
The contract encompasses a three-year calibration services agreement for the National Research Council of Canada’s Clinical Trial Material Facility, starting in September 2026, and structured as three consecutive one-year terms. The vendor will be responsible for calibrating all 365 pieces of equipment listed in Annex 1, which are integral to bio-manufacturing operations and must remain compliant with industry standards and regulatory mandates. Calibration services are essential to ensure the accuracy and reliability of equipment, directly supporting the integrity of clinical trial materials. In addition to routine calibrations, the contract includes mandatory provision of emergency calibration services to be activated on an as-needed basis during unexpected equipment failures, operational disruptions, or urgent compliance events. The solicitation, issued under reference number 25-58107/26-58107, was posted on August 6, 2026, with responses due by August 25, 2026, and is part of an open competitive bidding process managed by the Government of Canada through the National Research Council. The primary point of contact for inquiries is Cindy Romain, Contracting Authority, reachable via email and phone provided in the solicitation.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 17 days
View Details
NAICS: 541611
New
International
Reciprocal Procurement Compliance and Certification ServicesThe contract titled Reciprocal Procurement Compliance and Certification Services is a subcontract under the Government of Canada, specifically managed by the National Research Council of Canada, aimed at providing expert support to complete Annex H – Declaration for Reciprocal Procurement. This declaration is essential to align with Canadian federal procurement policies, ensuring that all contractual obligations related to reciprocal trade agreements are accurately documented and formally certified. The work involves navigating complex regulatory requirements to validate compliance, which may include reviewing supply chains, verifying domestic content, and preparing auditable records that meet federal standards. The opportunity is posted with a response deadline of September 1, 2026, and is classified under NAICS code 541611, indicating it pertains to administrative management and general management consulting services. Performance of the contract is expected to take place in Ottawa, though no specific office address or point of contact is provided. The solicitation does not specify a set-aside type, suggesting it is open to all eligible businesses regardless of size or designation. Contractors are expected to deliver precise, policy-compliant documentation that enables the National Research Council of Canada to proceed with procurement activities in full adherence to national and international trade agreements.
Administrative Management and General Management Consulting Services

POSTED

4 days ago

DEADLINE

in 24 days
View Details
NAICS: 423490
New
International
Supply of Spares, Consumables, and DocumentationThe contract titled Supply of Spares, Consumables, and Documentation under the NAICS code 423490 is a subcontract issued by the National Research Council of Canada on behalf of the Government of Canada, with a posted date of August 4, 2026, and a response deadline of September 1, 2026. It requires the supply of essential spare parts and consumables such as seals and sample holders, alongside comprehensive technical documentation including operational manuals, software licenses, and RSPLs, all to be delivered as integral components of system provisioning. The place of performance is specified as Ottawa, Canada, and the contract is structured to ensure complete technical readiness and ongoing functionality of the delivered systems. All deliverables must be provided in alignment with the technical specifications mandated by the National Research Council of Canada, with the expectation that spare parts and consumables will support long-term operation and maintenance, while documentation must be complete, accurate, and accessible for end-user deployment. Subcontractors are expected to meet delivery timelines and quality standards without deviation, and submissions must be received before the deadline to be considered. The contract does not specify set-aside provisions or organization type restrictions, allowing eligible suppliers to participate under standard subcontracting rules applicable to federal procurement in Canada.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in 24 days
View Details
NAICS: 611430
New
International
Training Delivery for ARC System OperationThe contract entitled Training Delivery for ARC System Operation is a subcontract issued by the National Research Council of Canada under the Government of Canada, soliciting services for on-site training of NRC staff in the operation, maintenance, and safety protocols of the ARC system. The training must be delivered in Ottawa and includes the development of bilingual training materials to ensure accessibility and comprehension for all participants. The work requires documented outcomes to verify the effectiveness of the training and the proficiency gained by staff, ensuring compliance with operational and safety standards. This subcontract falls under NAICS code 611430, indicating it is related to other schools and instruction services. The opportunity was posted on August 4, 2026, with a response deadline of September 1, 2026, at 7:00 PM Eastern Time, and is accessible via the Canada Buys procurement portal.
Professional and Management Development Training

POSTED

4 days ago

DEADLINE

in 24 days
View Details