This Solicitation opportunity from Department Of Defense was posted on September 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SEMICONDUCTOR DEVICE, D

Closed

SPE7M5-26-T-520EFederal

Submission Closed10/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334413

New

DIBBS

Radio Frequency (RF) Cable Supply (NSN 6145013353058)This subcontract involves the supply of 15,000 feet of Radio Frequency Cable for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The materials must be manufactured or sourced in accordance with NSN 6145013353058 and the DLA Master List of Technical and Quality Requirements. Strict adherence to the Buy American Act and the Berry Amendment is required, with packaging following ASTM D3951, MIL-STD-129, and RP001 standards. Delivery is specified as FOB Origin. The opportunity is a total small business set-aside under NAICS code 334413 for the Department of Defense. Performance will take place at Robins Air Force Base. Interested parties must respond by November 20, 2026, to provide the required RF cable quantities.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Microcircuit Memory Component Supply (NSN 5962-0130-36132)This subcontract, issued by the Department of Defense under the DLA Weapons Support Active Devices Division, requires the manufacture or sourcing of 54 units of Microcircuit Memory, identified by NSN 5962013036132. The components must strictly adhere to Standard Microcircuit Drawing NR 67268 5962-8867001LA Revision G and IPC/JEDEC J-STD-609 lead finish markings. All hardware must be mercury-free, and the supplier is required to provide DLA Form 918 along with full traceability documentation upon delivery. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334413, with performance taking place in Columbus, Ohio. To be eligible, contractors must complete a CMMC Level 2 Self-Assessment. The solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

High-Reliability Backplane PCB FabricationThis subcontract involves the fabrication of five unpopulated, high-reliability multi-layer printed circuit boards for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires the use of industrial etching, drilling, and plating equipment to produce high-density interconnect PCBs in accordance with NSN 5998-01-485-3488 and the DLA Master List of Technical and Quality Requirements. Eligible providers must maintain ISO 9001:2015 certification and ensure full compliance with ITAR/EAR regulations and CMMC Level 2 security standards. The work is categorized under NAICS code 334413, with the place of performance located in Tracy, California. Responses are due by November 20, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

RF Cable Assembly Fabrication (NSN 5995-01-255-1937)This subcontract involves the fabrication of RF cable assemblies under NSN 5995-01-255-1937 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the production of assemblies according to five specific reference drawings, utilizing specialized RF termination tools and measurement and test equipment for signal verification. The opportunity is designated as a total small business set-aside under NAICS code 334413. To be eligible, contractors must maintain a Confidential security clearance, JCP certification, and CMMC Level 2 compliance. The response deadline for this Department of Defense requirement is November 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Linear Microcircuit Fabrication (NSN 5962-01-468-8631)This subcontract involves the fabrication of high-precision linear microcircuits for the Department of Defense under the DLA Weapons Support Active Devices Division. The selected manufacturer must produce three linear microcircuits that strictly conform to TDP Rev A Gen 1 and Basic Drawing NR 67268 5962-89981 Revision J. Production is required to take place within cleanroom facilities utilizing ESD-safe workstations to ensure technical precision and component integrity. To qualify, contractors must maintain SAE AS9003 or ISO 9001 quality systems and provide a CMMC Level 2 self-assessment. The final delivery must include the completed microcircuits along with comprehensive traceability documentation. This project is categorized under NAICS code 334413, with the place of performance located in Columbus, Ohio.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Specialized Electrical Component SupplyThe Specialized Electrical Component Supply subcontract involves the provision of raw materials and specialized connectors for prime contractors working on DLA Weapons Support ASC projects. The scope of work specifically requires high-grade wiring and connectors that meet the specifications for NSN 6150-01-685-4024. To ensure quality and regulatory adherence, the supplier must provide Certificates of Conformance to support ISO 9001/AS9003 quality systems and maintain strict ITAR/EAR compliance for all controlled technical data. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this effort falls under NAICS code 334413. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 17, 2026, for this procurement of certified raw materials and components.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fiber Optic Raw Materials and Component SupplyThis subcontract, titled Fiber Optic Raw Materials and Component Supply, involves the provision of raw fiber optic cabling, connectors, and protective boots for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The supplier is responsible for sourcing materials according to Drawing 53711 and must provide Certificates of Conformance to verify that all components adhere to strict military specifications. All deliverables must be supplied to the assembly manufacturer in full compliance with the Buy American Act and the Berry Amendment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334413 for the Department of Defense. Interested parties must respond by November 24, 2026, to be considered for this requirement.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Approved Component Supply for NSN 5995-01-710-4526This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, involves the supply of approved wires, connectors, and shielding for prime contractors. The materials must strictly adhere to the technical requirements of Drawing NR 19200 13106556 and maintain full compliance with the Berry Amendment and the Buy American Act. To ensure quality and security, the provider must deliver certified raw materials and components with full traceability to approved sources, and JCP certification is required for any access to technical data. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334413, with performance located in New Cumberland. Interested parties must respond by November 17, 2026, regarding the supply of components for NSN 5995-01-710-4526.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

RF Coaxial Cable and Connector SupplyThis subcontract involves the supply of raw RF coaxial cabling and precision connectors for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires the sourcing of high-frequency coaxial cable and matching RF connectors that strictly adhere to the technical data specified for NSN 5995-01-680-2059. Deliverables include bulk RF cable and connector kits, accompanied by necessary Certificates of Conformance to verify quality and specifications. Operating under NAICS code 334413, the contract mandates strict adherence to the Buy American Act to ensure the domestic origin of materials. Performance for this requirement is centered in Albany. Interested parties should note the response deadline of November 17, 2026, for this procurement effort.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

MICROCIRCUIT, DIGITAL

Solicitation # SPE7M5-27-T-1680

Solicitation SPE7M5-27-T-1680 is a small business set-aside procurement issued by the DLA Weapons Support Active Devices Division for five units of digital microcircuits, identified by NSN 5962016840862 and part number BU64863GC-140. The contract requires delivery within 147 days, with an original required delivery date of May 15, 2027, and shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically DLA Distribution DDWO in Columbus, Ohio. The procurement is subject to stringent quality and traceability requirements. The contractor must provide supply chain traceability documentation per DLAD Procurement Note C03 and submit DLA Land and Maritime Form 918 along with test reports to the CDAP monitor at least 15 days before the delivery date. Shipment is prohibited until the contract administrator provides written authorization based on the adequacy of this documentation. Additionally, the contractor must adhere to strict packaging standards, including MIL-STD-2073-1E and MIL-PRF-81705 for ESD and EMI protection, and use Special Marking Code 39 to identify the items as ESD sensitive electronic devices. Administrative compliance includes electronic invoicing via Wide Area WorkFlow and adherence to the Buy American and Balance of Payments Program. The contract also incorporates cybersecurity and reporting mandates under DFARS 252.204-7012 and 252.204-7009. Quotations for this requirement were due by November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

SEMICONDUCTOR DEVICE, D

Solicitation # SPE7M5-27-T-1630

Solicitation SPE7M5-27-T-1630 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of two semiconductor device diodes, identified by NSN 5961-01-026-2577. The contract requires delivery to Tobyhanna, Pennsylvania, within five days of order, with shipping conducted via the fastest traceable means. Inspection and acceptance are both set at the destination. The contractor must adhere to strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements and the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for Federal Supply Class 5961. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-19491, with specific component lead finish markings required per IPC/JEDEC J-STD-609. Additionally, the contractor must maintain supply chain traceability documentation and utilize the Wide Area Workflow system for electronic invoicing and payment requests. The solicitation incorporates various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

MICROCIRCUIT, DIGITAL

Solicitation # SPE7M5-27-T-2750

This solicitation, issued by the DLA Weapons Support Active Devices Division, is for the procurement of 20 units of a digital microcircuit, specifically a critical application item identified as Rockwell Collins, Inc. part number 351-3828-020 under NSN 5962011012406. This is a small business set-aside procurement with a required delivery date of November 19, 2027, and a need ship date of May 4, 2027. The contract specifies destination inspection and acceptance, requiring strict adherence to supply chain traceability and test documentation. Contractors must submit DLA Land and Maritime Form 918 and receive written authorization from the contract administrator before shipping material to the DLA Distribution DDWO in Columbus, Ohio. The item is classified as an electrostatic discharge sensitive device, necessitating rigorous handling and packaging standards. The contractor must maintain an ESD control program and an approved ESD workstation per MIL-HDBK-773, and employees must be trained in proper grounding and handling. Packaging must comply with MIL-STD-2073-1E and MIL-PRF-81705, utilizing specific barrier materials and cushioning to prevent lead damage. Additionally, the contractor must apply lead finish markings according to IPC/JEDEC J-STD-609 and ensure all marking complies with MIL-STD-129. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with Buy American and NIST SP 800-171 cybersecurity assessment requirements.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 10 days

AI Contract Overview

Solicitation SPE7M5-26-T-520E is a Request for Quotations issued by the DLA Land and Maritime Active Devices Division for the procurement of one semiconductor diode, specifically NSN 5961-01-228-8203, manufactured by Miller Electric Mfg. LLC (Part Number 037-956). This is designated as a critical application item for which surplus is not acceptable. The required delivery date is August 28, 2026, with a delivery timeframe of 20 days after order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically for delivery to the USS Kearsarge LHD 3. The contract mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and qualification via the Qualified Suppliers List of Distributors (QSLD) and Qualified Testing Suppliers List (QTSL) for Federal Supply Classes 5961 and 5962. Packaging and preservation must comply with MIL-DTL-19491 and MIL-STD-129. Additionally, the contractor must apply specific lead finish markings to each individual unit pack in accordance with IPC/JEDEC J-STD-609. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment.

General Info

DLA seeks one Miller Electric semiconductor diode for USS Kearsarge by August 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISION

NAICS

334413 - Semiconductor and Related Device Manufacturing

Place of Performance

UNIT 100284 BOX 1, FPO, AE, 09534, USA

Set-Aside

NONE

Documents

18 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 23

Solicitation

Response DeadlineOct 5

Deadline has passed

Submission Closed

10/05/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

Office AddressUSA

Contacts

Margaret Smith

contact@example.gov

+1 (555) 000-0000

Full Description

SEMICONDUCTOR DEVICE,DIODE
SEMICONDUCTOR DEVICE,DIODE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ014: QUALIFIED SUPPLIERS LIST OF DISTRIBUTORS (QSLD) AND QUALIFIED
TESTING SUPPLIERS LIST (QTSL) FOR FEDERAL SUPPLY CLASS (FSC) 5961
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS. THIS IS A QUALIFIED ITEM. QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE M01 "QUALIFIED SUPPLIERS FOR FEDERAL SUPPLY CLASS (FSC)
5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS" APPLY.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
SPE7M5-26-T-520E
SECTION B
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement)
CRITICAL APPLICATION ITEM
MILLER ELECTRIC MFG. LLC 3BH04 P/N 037-956
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018121827 0001 EA 1.000
NSN/MATERIAL:5961012288203
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION:
SPE7M5-26-T-520E
SECTION B
PR: 7018121827 PRLI: 0001 CONT’D
MIL-DTL-19491, FOR SEMICONDUCTOR DEVICES.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS
PARCEL POST ADDRESS:
V21700
USS KEARSARGE LHD 3
UNIT 100284 BOX 1
FPO AE 09534
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V21700
USS KEARSARGE LHD 3
DLA VENDORS: USE VSM FOR
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V217006237ER02
RDD:
PROJ: EP5 TP 2
SUPP ADD: YNER01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:08/28/2026
SPE7M5-26-T-520E NSN/Part Number: 5961-01-228-8203 Quantity: 1 EA Purchase Request: 7018121827QTY: 1 Delivery: 20 days ADO