This Sources Sought opportunity from Department Of Defense was posted on January 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Service Air Compressor Replacement Sources Sought

Closed

FA9101AirCompressorFederal

Submission Closed01/19/2026, 01:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333912

New

International

Насоси та компресори (Фільтри до пересувної азотної компресорної станції ПСГА-25/25)

Solicitation # UA-2026-11-13-006271-a

This solicitation, issued by the Limited Liability Company Operator of the Gas Transmission System of Ukraine, concerns the procurement of pumps and compressors, specifically filters for the PSGA-25/25 mobile nitrogen compressor station. The procurement is funded through the organization's own budget derived from its business activities. The contract terms regarding delivery and payment are based on the draft agreement from a previously cancelled procurement procedure. The final duration of the contract will be determined and calculated at the time of signing. The procurement process is managed by Olga Oleksandrivna Panchenko and is registered under solicitation number UA-2026-11-13-006271-a.

ТОВАРИСТВО З ОБМЕЖЕНОЮ ВІДПОВІДАЛЬНІСТЮ "ОПЕРАТОР ГАЗОТРАНСПОРТНОЇ СИСТЕМИ УКРАЇНИ"

POSTED

DEADLINE

RFP Mobile Nitrogen Generators for the Department of National Defence v3

Solicitation # WS5552838538

The Department of Public Works and Government Services is soliciting proposals for Mobile Nitrogen Generators to support the Department of National Defence. This federal solicitation, identified by number WS5552838538, specifies that the place of performance for the contract will be in Montreal, Canada. Jean-Robert Goulet serves as the primary contracting authority for this procurement process. Prospective bidders must adhere to a strict submission deadline of November 24, 2026, at 14:00 EST. It is explicitly noted that this specific time overrides any conflicting closing dates listed on the SAP Business Network or CanadaBuys platforms. Any supporting documentation or responses submitted after this designated cutoff will be declared non-responsive.

Department of Public Works and Government Services

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-3171

Solicitation SPE7M4-27-T-3171 is a Request for Quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of two reed valves, identified by NSN 4310-01-070-2384 and part number 6181-60-2 from Cooper Interconnect, Inc. This is a restricted source item requiring engineering source approval by the Government Design Control Activity. The contract is designated as a Small Business Set-Aside with a required delivery date of February 6, 2026, and a delivery timeline of 5 days after order. Shipping is FOB Origin with the final destination located at DZ IKMAL MERKEZI KOMUTANLIGI in Derince Izmit, Turkey. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The use of Class I ozone depleting chemicals is strictly prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment processing. Key regulatory clauses include NIST SP 800-171 for cybersecurity assessment and various FAR and DFARS clauses regarding the prohibition of covered defense telecommunications equipment and the safeguarding of covered defense information. Inspection and acceptance are both conducted at the point of origin.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

VACUUM PUMP UNIT, ROTAR

Solicitation # SPE7M1-27-T-2641

The DLA Weapons Support Maritime Supply Chain has issued a small business set-aside Request for Quotations for 19 rotary vacuum pump units under NSN 4310-00-911-4754. The procurement requires the units to be delivered FOB Destination to Tracy, California, with a required delivery date of April 3, 2027. Each unit must be accompanied by a manufacturer's commercial manual covering operation, services, maintenance, and repair instructions, including a complete parts list. Technical compliance is governed by Basic Drawing NR 16236 RE-009114754 Revision DTD 10/19/2026 and the DLA Master List of Technical and Quality Requirements. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for preservation and hazardous material labeling per 29 CFR 1910.1200. The contract incorporates several critical FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity assessment requirements, and prohibitions on covered defense telecommunications equipment. Administrative processing, including invoicing and receiving reports, must be managed through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CYLINDER, RECIPROCATING

Solicitation # SPE7M1-27-T-2616

Solicitation SPE7M1-27-T-2616 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one reciprocating compressor cylinder, identified by NSN 4310-12-355-5027. This is a critical application item and a restricted source item requiring engineering source approval by the government design control activity, specifically referencing Sauer Compressors USA, Inc. P/N 061872. The item is to be delivered FOB Origin to DLA Distribution Puget Sound in Bremerton, Washington, with a need ship date of May 4, 2027, and a required delivery date of May 16, 2027. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and specifies packaging and marking according to MIL-STD-2073-1E and MIL-STD-129. Special restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional uses governed by NAVSEA 5100-003D. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PARTS KIT, COMPRESSOR

Solicitation # SPE7M1-27-U-1196

Solicitation SPE7M1-27-U-1196 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 111 compressor parts kits under NSN 4310-01-681-8723. This unilateral indefinite delivery contract has a maximum value of 350,000.00 USD. Quotations are due by November 27, 2026, with a required delivery timeline of 62 days after order. The contract is issued under the First Destination Transportation program with FOB Origin terms, while inspection and acceptance will occur at the destination. Price evaluation will be based on the quoted annual demand, with a specific price evaluation preference provided for certified HUBZone Small Business Concerns. The contractor must adhere to strict technical and quality standards, including SAE AS9003 or ISO 9001 for inspection systems and MIL-STD-129 and MIL-STD-130 for marking and identification. Packaging must comply with MIL-STD-2073-1 and DLA requirement RP001. Due to the nature of the technical data, this procurement is subject to ITAR and EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Additionally, the contract incorporates rigorous cybersecurity requirements, including CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7LX-27-U-0910

This Indefinite Delivery Contract, solicitation SPE7LX-27-U-0910, is issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of piston rings used on Light Armored Vehicles. The contract is a HUBZone Set-Aside under NAICS code 333912, with a maximum contract value of 350,000.00 dollars. The estimated annual quantity is 90 units, with a guaranteed contract minimum of 13 units and a minimum delivery order quantity of 22 units. Delivery is required within 65 days after order, with the point of inspection and acceptance set at the destination. Technical requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, combating trafficking in persons, and adherence to the Buy American Act and Berry Amendment. Payment and invoicing are processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Fuel and Oil Servicing Nozzle ManufacturerThis subcontract involves the manufacture and supply of fuel and oil servicing nozzles for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will utilize precision machining equipment to fabricate nozzles that strictly adhere to the technical specifications for NSN 4930-01-697-4809. A critical component of the scope includes performing rigorous quality control and inspections to ensure all finished products comply with the Department of Defense technical and quality requirements. The project falls under NAICS code 333912 and is managed through the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 23, 2026, to submit their proposals for this manufacturing requirement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0876

This solicitation, issued by the DLA Weapons Support Nuclear Reactor Program, is for the procurement of 28 airline lubricators, specifically part number L17-B00-MPDA from Norgren C A Co, identified by NSN 4930-01-384-6340. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of July 5, 2027, and a need ship date of April 26, 2027. Delivery is specified as FOB Destination Other, with a lead time of 153 days after order. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130N for identification of U.S. military property. Inspection and acceptance will occur at the destination per FAR 52.246-2. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, cybersecurity reporting under DFARS 252.204-7012, and strict mercury containment protocols per NAVSEA 5100-003D. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

NOZZLE, FUEL AND OIL SE

Solicitation # SPE8EE-27-T-0422

Solicitation SPE8EE-27-T-0422 is a federal procurement issued by the Department of Defense through the Defense Logistics Agency for the acquisition of 14 fuel and oil servicing nozzles, identified by NSN 4930-01-697-4809. The contract is categorized under NAICS code 333912 and specifies a delivery lead time of 166 days after order, with a required delivery date of March 5, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, which take precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001 requirements. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Key regulatory clauses include DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-2568

Solicitation SPE7M1-27-T-2568 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 515 units of a compressor plate assembly. The hardware is identified by NSN 4310-01-407-1865 and Hex Model NR UX-056-UJ, featuring a titanium plate and a required NBR gasket. The contract specifies a delivery timeline of 119 days after order, with an original required delivery date of March 19, 2027, and a need ship date of March 23, 2027. Delivery is FOB Origin, with the final destination for inspection and acceptance located at DLA Distribution San Diego. The procurement is a total small business set-aside under FAR 52.219-6 and requires compliance with the Buy American and Balance of Payments Program. Technical and quality standards are governed by the DLA Master List, and the contractor must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additional requirements include a CMMC Level 2 self-assessment, the removal of government identification from non-accepted supplies, and a strict prohibition on the intentional addition of mercury or mercury-containing compounds. Invoicing must be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SPOUT, FUEL AND OIL SER

Solicitation # SPE8EE-27-T-0434

Solicitation SPE8EE-27-T-0434 is a request for quotations issued by DLA Troop Support for the procurement of 24 fuel and oil servicing nozzles, identified by NSN 4930-01-673-2829. The contract specifies a delivery timeline of 166 days after the order, with a required ship date of May 9, 2027, and a final delivery date of June 14, 2027. Shipping is designated as FOB Origin, with the destination for inspection and acceptance located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict technical and quality requirements from the DLA Master List, with packaging following ASTM D3951 and marking and labeling complying with MIL-STD-129. Key regulatory requirements include the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 23, 2026, and must be submitted to the DLA Troop Support office in Philadelphia.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days

General Info

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

NAICS

333912 - Air and Gas Compressor Manufacturing

Place of Performance

COOPERTOWN, TN, USA

Set-Aside

NONE

Documents

4 pages · soo

High

2 pages · sources-sought

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJan 12

Sources Sought

Response DeadlineJan 19

Deadline has passed

Submission Closed

01/19/2026, 01:00:00 PM CST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Contacts2 people available

OfficeARNOLD AFB, TN, 37389-1332, USA

Organization / AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Office AddressARNOLD AFB, TN, 37389-1332, USA

Contacts

Paytonne Szatkowski

Bethany Hill

Full Description

This is a Sources Sought Notice to determine the availability and technical capability of small and large businesses to meet the Government’s requirement for a Service Air Compressor Replacement IAW Attachment 1 – DRAFT Service Air Compressor Replacement SOO. The result of this market research will contribute to determining the method of procurement if a requirement materializes. Based on the responses to this Sources Sought Notice/Market Research effort, the requirement may result in a single source acquisition, may be set-aside for small businesses (in full or in part), or may be procured through full and open competition. Telephone inquiries will not be accepted or acknowledged, and feedback or evaluations may or may not be provided to companies regarding submissions.