Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Sensor & Instrumentation Supply

Active

Federal

Response Deadline12/02/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, involves the supply of high-precision force and displacement sensors for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The scope of work includes the procurement and delivery of high-resolution displacement measurement systems and advanced 6-DOF force/moment sensor arrays that support real-time dynamic feedback. All delivered equipment must be accompanied by necessary calibration certifications to ensure operational accuracy. The performance of this contract will take place at Wright Patterson AFB. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026. The requirement falls under NAICS code 334517, focusing on the specialized instrumentation needed for advanced aerospace testing and measurement.

General Info

DoD subcontract for high-precision sensors and measurement systems at Wright Patterson AFB.

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

NAICS

334517 - Irradiation Apparatus Manufacturing

Place of Performance

Wright Patterson AFB, OH, USA

Set-Aside

NONE

Documents

This scope was carved out of FA9101279ELTFM.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RWP - Extreme Loads Tire Force Machine (ELTFM)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineDec 2

Submission deadline

Response Deadline

12/02/2026, 10:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-precision force and displacement sensors for prime contractors on Air Force Headquarters Air Force Test Center projects. Procures and delivers high-resolution displacement measurement systems and advanced 6-DOF force/moment sensor arrays capable of real-time dynamic feedback. Requires calibration certifications. Delivers calibrated sensor arrays and displacement measurement systems.

Similar Contracts

Same NAICS industry code

Handheld X-Ray Device

Solicitation # SRC0000042818

The Ohio Attorney General’s Office (AGO), specifically the Bureau of Criminal Investigation, is soliciting quotes under solicitation number SRC0000042818 for the procurement of handheld X-ray scanners. The agency intends to purchase between one and eight units to assist narcotics agents in locating concealed illegal narcotics within vehicles and residences. The required equipment must include upgraded lead detection, a TX panel kit, a standard accessories kit, and a MatID upgrade. Award will be granted to the lowest priced responsible and responsive bidder who meets the technical specifications. Vendors may propose equivalent products if they demonstrate that the equipment meets or exceeds all stated requirements. All responses must be submitted online via the Ohio Buys Supplier Portal by the specified deadline, with quotes remaining valid for at least 60 days. Pricing must be comprehensive, covering all equipment, delivery, setup, and warranty costs. Upon delivery, the vendor is required to assist the AGO in acceptance testing to verify device functionality, image quality, connectivity, battery performance, and accessory completeness. The contract is governed by the AGO Goods Terms and Conditions, which include a one-year warranty against material defects and viruses, as well as requirements for the contractor to indemnify the Attorney General for negligence or intellectual property infringement. Payment is contingent upon the issuance of an official State of Ohio Purchase Order and compliance with the Ohio Revised Code. Invoices must be submitted electronically to the AGO finance department with a full itemization of goods. Contractors must certify that they are not debarred from government contracts, comply with U.S. trade control laws, and adhere to state and federal equal employment opportunity laws. Delivery is handled as F.O.B. Destination, and the specific lead time provided in the bid will become a binding obligation upon the issuance of a contract.

Ago461400 Bci Investigations North Bciihq, Ago-attorney General

POSTED

about 4 hours ago

DEADLINE

Pressure Indicator Supply (NSN 6685-01-281-2627)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Supply of Omega Engineering Pressure IndicatorsThis subcontract involves the procurement and delivery of three commercial off-the-shelf Omega Engineering pressure indicators, part number DP41-S-R4, to support DLA supply contracts. The items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. All deliverables must strictly adhere to MIL-STD-129 marking and MIL-STD-2073-1E packaging standards. The contractor is required to ensure full compliance with the Buy American Act and NAVSEA 5100-003D mercury restrictions. This requirement is managed under NAICS code 334517 for the Department of Defense, specifically through the DLA Weapons Support ASC Supplier OEM Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Dial Indicating Pressure Gauge (NSN 6685-01-509-4699)This subcontract involves the manufacture or procurement of one dial indicating pressure gauge under NSN 6685-01-509-4699 for the Department of Defense, specifically supporting DLA Weapons Support Aviation Supply Chain contracts. The contractor must ensure the gauge meets RA001 technical requirements and undergoes specialized cleaning for oxygen service according to MIL-STD-1330. Additionally, the item must be marked in compliance with MIL-STD-129 and undergo quality sampling per MIL-STD-1916 or ASQ H1331. The project falls under NAICS code 334517 and requires the delivery of a single, fully cleaned, marked, and packaged pressure gauge. Performance is designated for FPO 09583, with a response deadline set for November 10, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

Supply of Temperature TransmittersThis subcontract agreement involves the supply of industrial-grade temperature transmitters for prime contractors working on procurement projects for the Oil & Gas Development Company Limited in Pakistan. The scope of work encompasses the manufacturing, calibration, and delivery of temperature sensing elements, specifically RTDs or thermocouples, along with associated transmitters. The equipment must be designed for extreme oilfield environments, utilizing temperature probes and thermowells capable of withstanding high-temperature and high-pressure conditions. Interested parties must submit their responses by December 3, 2026, to provide these completed temperature transmitter assemblies under NAICS code 334517.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Supply of Pressure TransmittersThis subcontract agreement involves the supply of industrial-grade pressure transmitters for prime contractors working on procurement projects for the Oil & Gas Development Company Limited (OGDCL) in Pakistan. The scope of work includes the manufacturing, testing, and delivery of pressure sensing instruments designed to convert pressure measurements into electrical signals. These units must incorporate pressure transducers, signal conditioners, and specialized housing rated for hazardous oil and gas environments. The procurement process is identified under NAICS code 334517, with a posting date of November 2, 2026, and a response deadline of December 3, 2026. Interested parties must ensure that all delivered equipment meets the rigorous safety and technical standards required for high-risk industrial operations within the energy sector.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Weapons Detection System Supply and SetupThis subcontract involves the supply and installation of concealed weapons detection systems for prime contractors working on the Brookland-Lakeview Empowerment Center facility projects in South Carolina. The scope of work requires the delivery and setup of a single-opening system equivalent to the CEIA OpenGate, along with a handheld wand detector and charger, specifically for the main front entrance. Beyond hardware installation, the contractor is responsible for conducting detection testing and providing comprehensive staff training. Final deliverables include the fully operational weapons detection system, all relevant operating manuals, and necessary training materials. The solicitation was posted on November 2, 2026, with a response deadline of November 16, 2026.

Brookland-lakeview Empowerment Center

POSTED

about 18 hours ago

DEADLINE

Supplier of Dial Pointer (NSN 5355-01-561-5266)This subcontract involves the sourcing and manufacture of Dial Pointers, specifically identified by NSN 5355-01-561-5266, to support prime contractors fulfilling DLA supply contracts. The selected provider must ensure that the precision measuring tools are produced in strict accordance with the DLA Master List technical specifications and maintain full compliance with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, with the place of performance located in Fargo, Minnesota. Interested parties must respond by November 12, 2026, for this requirement categorized under NAICS code 334517.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Dial Indicating Pressure Gages (NSN 6685-00-951-4539)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the procurement and delivery of 100 dial indicating pressure gages under NSN 6685009514539. The gages must conform to Basic Drawing NR 76301 ST7M361 Revision C and include documented traceability to Ametek Inc. Quality assurance must be performed according to MIL-STD-1916 or ASQ H1331, with packaging adhering to MIL-STD-129 and RP001 standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 334517. Final delivery of the inspected units is required for locations in Jacksonville and San Diego. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Liquid Quantity IndicatorsThis subcontract involves the procurement or manufacture of liquid quantity indicators for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work specifically requires the delivery of two inspected units matching Cummins part numbers 5677770 and 6494342, to be delivered to Fort Hood, Texas. The contractor must ensure all items are packaged according to RP001 and MIL-STD-129 standards and comply with the DLA Master List of Technical and Quality Requirements. Additionally, the agreement mandates strict adherence to the Buy American Act and DFARS 252.204-7012 cybersecurity reporting regulations.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Liquid Quantity Indicator (NSN 6680-01-667-4070)This subcontract involves the procurement of one Liquid Quantity Indicator, identified by NSN 6680-01-667-4070, for prime contractors working on DLA Weapons Support projects. The Department of Defense requires the unit to be delivered to Virginia Beach, ensuring strict adherence to NAVSEA 5100-003D mercury restrictions and Hazard Communication Standard 29 CFR 1910.1200. The selected provider must ensure the item is marked and packaged according to MIL-STD-129 standards and shipped via the fastest traceable means. This opportunity falls under NAICS code 334517 and was posted by the DLA Weapons Support ASC Commodities Division with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Pneumatic Receiver Pressure GageThis subcontract involves the manufacture of a specialized pneumatic receiver pressure gage, identified by NSN 6685015404295, for prime contractors supporting the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for fabricating the gage according to source-controlled technical drawings and conducting pneumatic pressure accuracy testing. Quality assurance must be maintained through adherence to MIL-STD-105/ASQ Z1.4 sampling plans, and the final delivery must include a Certificate of Conformance. The project requires the use of precision calibration equipment and strict compliance with DFARS 252.204-7012 regulations. Performance will take place in Fort Polk, Louisiana, under NAICS code 334517. The solicitation was posted on November 1, 2026, with a response deadline of November 9, 2026, for the Department of Defense.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

Hydraulic Component SupplyThis subcontract, titled Hydraulic Component Supply, is issued by the Department of Defense under the FA9101 AEDC Pkp Procurement Branch. The contract focuses on the procurement and delivery of raw materials and specialized hydraulic components for prime contractors working on Arnold Engineering Development Complex projects. Required deliverables include high-performance hardware such as precision valves, actuators, high-pressure hoses, and specialized hydraulic fluid, all of which must be delivered directly to the project site. The opportunity is designated as a Total Small Business Set Aside under NAICS code 333995. It was posted on November 2, 2026, with a response deadline of November 6, 2026. The place of performance for this contract is located in Silver Spring.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 11 hours ago

DEADLINE

Hydraulic System Installation & CommissioningThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the installation and commissioning of new hydraulic systems. The selected contractor will be responsible for the on-site installation of fabricated components and piping connections, as well as system start-up and performance testing. All work must adhere to strict quality control protocols to ensure the delivery of a fully operational hydraulic motion system. The project is designated as a total Small Business Set Aside under NAICS code 238220, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and the deadline for responses set for November 6, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 11 hours ago

DEADLINE

On-Site Demolition & RemovalThis subcontract opportunity, titled On-Site Demolition and Removal, is issued by the Department of Defense through the FA9101 AEDC Procurement Branch. The project involves the demolition and removal of legacy hydraulic motion system components for prime contractors at the Arnold Engineering Development Complex. Key tasks include the on-site demolition of old hydraulic lines and the removal of legacy pumps and actuators using industrial demolition tools and rigging equipment to ensure the site is cleared for new system installations. The contract is designated as a Total Small Business Set Aside under NAICS code 333996. Performance will take place in Silver Spring, zip code 20903. The solicitation was posted on November 2, 2026, with a response deadline of November 6, 2026.

Fluid Power Pump and Motor Manufacturing

POSTED

about 11 hours ago

DEADLINE

Hydraulic Component Fabrication & ManufacturingThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the fabrication and pre-assembly of core hydraulic system components. The selected contractor will be responsible for off-site manufacturing of custom components, the pre-assembly of hydraulic circuits, and rigorous factory testing utilizing precision machining tools. Once completed, all fabricated components must be delivered to the project site to support prime contractors. The project is designated as a total Small Business Set Aside under NAICS code 333999, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Hydraulic System Design & EngineeringThis small business set-aside subcontract, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, focuses on the detailed engineering and design of high-performance hydraulic motion systems. The selected contractor will be responsible for developing technical approaches, system designs, and engineering specifications to establish a comprehensive roadmap for fabrication and installation. Key deliverables include the final engineering design package, technical specifications, and all necessary approved design documents. The project falls under NAICS code 541330 and is designated for performance in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

Facility Site Preparation & Utility ModificationThis subcontract for Facility Site Preparation and Utility Modification involves performing critical infrastructure work for prime contractors at Wright-Patterson AFB Building 31A Area B. The scope of work focuses on executing industrial electrical upgrades and civil foundation modifications to support Air Force Headquarters Air Force Test Center projects. All activities must be completed in strict accordance with local building codes and Air Force base facility standards to ensure a fully prepared installation site. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project falls under NAICS code 238210. The contract was posted on November 2, 2026, with a response deadline of December 2, 2026. The primary objective is the delivery of necessary power and foundation supports required for subsequent project phases.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 11 hours ago

DEADLINE

High-Capacity Load Frame & Table FabricationThis subcontract involves the manufacture of a high-load, multi-axis dynamic load frame and a high-capacity table to support prime contractors on projects for the Air Force Headquarters Air Force Test Center. The scope of work encompasses material procurement, heavy industrial fabrication, and the factory integration of load-bearing structures. To ensure structural integrity and safety, the contractor must provide material certifications verifying that all components can handle the specified high-load capacities. The project is managed under the Department of Defense through the FA9101 Aedc Pkp Procurement Branch, with performance taking place at Wright Patterson AFB. Classified under NAICS code 332312, the contract requires the final delivery of the fully fabricated and integrated load frame and table assembly. Interested parties must adhere to the response deadline of December 2, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE

Precision Component Fabrication (Custom Mounting Socket)This subcontract, titled Precision Component Fabrication (Custom Mounting Socket), involves the production of a custom cantilevered carriage mounting socket for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The work requires high-precision CNC machining based on 3D CAD models to guarantee that the final physical component is fully compatible with both the software and physical interfaces of the 168 inch Internal Dynamometer and the Joint Multi-Purpose Dynamometer. Managed by the Department of Defense under the FA9101 Aedc Pkp Procurement Branch, the project is categorized under NAICS code 332710. Performance of the contract will take place at Wright Patterson AFB. The solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

POSTED

about 11 hours ago

DEADLINE

Control Systems & DAQ Software DevelopmentThis subcontract opportunity involves the development of real-time data acquisition and control software modeling for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The scope of work focuses on modeling control software to synchronize heavy motion control systems with speed regulation under massive drag loads, while integrating real-time dynamic feedback from 6-DOF sensor arrays. The final deliverables include comprehensive software simulation models and a detailed DAQ/Control system architecture. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project will be performed at Wright Patterson AFB. Interested parties must ensure CMMC compliance to be eligible. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026, falling under NAICS code 541511.

Custom Computer Programming Services

POSTED

about 11 hours ago

DEADLINE

Structural Engineering & Design (Prototype A)The Structural Engineering and Design (Prototype A) subcontract involves providing specialized engineering design and modeling services for prime contractors supporting the Department of Defense, specifically for the Air Force Headquarters Air Force Test Center. The primary objective is the development of a high-load, multi-axis dynamic load frame. The scope of work includes creating verified engineering models, conducting detailed stress analyses, and producing 3D CAD models and machining drawings that adhere to specific Key Performance Parameters and Key System Attributes. The project will be performed at Wright Patterson AFB under NAICS code 541330. Key deliverables for this engagement include a comprehensive Critical Design Review package, formal stress analysis reports, and validated 3D CAD models. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

RWP - Extreme Loads Tire Force Machine (ELTFM)

Solicitation # FA9101279ELTFM

The Department of the Air Force, through the Headquarters Air Force Test Center (AFTC/PZ), is seeking a prototype for an Extreme Loads Tire Force Machine (ELTFM) to replace a legacy system that cannot meet current high vertical and lateral load requirements for military aircraft heavy-tire qualification. This high-capacity dynamic test machine is designed to bridge the operational gap between static load presses and high-speed dynamometer force testing. The project involves the design, modeling, manufacture, and installation of a multi-axis dynamic load frame integrated with a high-capacity table, precision sensors, and a LabVIEW-based real-time data acquisition and control system. The final system will be installed and commissioned at Wright-Patterson AFB in Ohio, specifically within Building 31A Area B. This acquisition is conducted under Other Transaction Authority (OTA) pursuant to 10 U.S.C. § 4022, targeting small businesses, nonprofits, or nontraditional defense contractors. The project is structured into two primary phases: Prototype A, focusing on the design and interface architecture, and Prototype E, covering physical assembly, factory and site acceptance testing, and operational commissioning. Pricing is hybrid, utilizing firm-fixed-price for base design milestones and unpriced, unfunded optional milestones for the execution phase based on rough order of magnitude estimates. Evaluation will be based on key performance parameters, system attributes, and interface commonality with the Joint Multi-Purpose Dynamometer. Due to the nature of the work, performers must comply with CMMC Level 2 and CUI cybersecurity requirements and provide a formal statement regarding Government Purpose Rights for intellectual property.

Other Measuring and Controlling Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Tunnel 9 Pitch Upgrade

Solicitation # FA9101T9PU

The Arnold Engineering Development Complex (AEDC) Tunnel 9 in Silver Spring, Maryland, requires the comprehensive modernization of a high-performance hydraulic motion system. This Firm-Fixed-Price (FFP) requirement, designated as a total Small Business Set Aside under NAICS 332912, encompasses the design, engineering, procurement, off-site fabrication, pre-assembly, on-site demolition, installation, and commissioning of core system components. Key deliverables include a primary control valve with a step response time of 55 ms or less, a main actuating cylinder with a 120.5 inch working stroke capable of 13 ft/s linear speed, a Hydraulic Power Unit (HPU), and a dedicated filtration and cooling kidney loop. All components must adhere to ASME B31.1, ASME BPVC VIII, and ISO 4406 standards. The project is structured in three phases: engineering and design, manufacturing and testing, and disassembly, installation, and start-up. The delivery schedule for the primary requirement is 46 weeks from the lead time event. Award will be based on a combination of technical capability, evaluated on an acceptable/unacceptable basis via a Contractor Statement of Work, past performance on similar hydraulic systems, and price reasonableness. Contractors must comply with strict Department of Defense marking and reporting requirements, including MIL-STD-130 for unique item identification and the use of the Wide Area WorkFlow (WAWF) system for invoicing. Additionally, offerors must meet specific Cybersecurity Maturity Model Certification (CMMC) level requirements and provide a CMMC UID in their proposal.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

J065--Riverain ClearRead Software in support of the VISN 23 VA Healthcare System

Solicitation # 36C26327Q0032

Network Contract Office 23 (36C263)

POSTED

about 11 hours ago

DEADLINE

Fluid-Hydraulic Pressure Transducer Supply

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Pressure Gage Snubbers

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Dial Pointer (NSN 5355-01-486-6089)

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Digital Sensor Starter Kits

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Amendment 0002 – Draft SOW Posted for Industry Review and Comment, Sources Sought Notice – DCF Mail and Packages Screening Equipment

Solicitation # A00002-2031ZA26N00061

Office Of The Chief Procurement Officer

POSTED

DEADLINE

Supply of Proximity Switches (NSN 5930-01-490-6723)

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS