Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Control Systems & DAQ Software Development

Active

Federal

Response Deadline12/02/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity involves the development of real-time data acquisition and control software modeling for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The scope of work focuses on modeling control software to synchronize heavy motion control systems with speed regulation under massive drag loads, while integrating real-time dynamic feedback from 6-DOF sensor arrays. The final deliverables include comprehensive software simulation models and a detailed DAQ/Control system architecture. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project will be performed at Wright Patterson AFB. Interested parties must ensure CMMC compliance to be eligible. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026, falling under NAICS code 541511.

General Info

DoD subcontract for real-time data acquisition and control software modeling at Wright Patterson AFB.

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

NAICS

541511 - Custom Computer Programming Services

Place of Performance

Wright Patterson AFB, OH, USA

Set-Aside

NONE

Documents

This scope was carved out of FA9101279ELTFM.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RWP - Extreme Loads Tire Force Machine (ELTFM)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineDec 2

Submission deadline

Response Deadline

12/02/2026, 10:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develops real-time data acquisition (DAQ) and control software modeling for prime contractors on Air Force Headquarters Air Force Test Center projects. Models control software for synchronization of heavy motion control systems with speed regulation under massive drag loads and integrates real-time dynamic feedback from 6-DOF sensor arrays. Requires CMMC compliance. Delivers software simulation models and DAQ/Control system architecture.

Similar Contracts

Same NAICS industry code

Unified Control Software (UCS) & IntegrationThis subcontract for the Government of Canada involves the development and configuration of Unified Control Software (UCS) intended for prime contractors on DND projects. The scope of work focuses on implementing remote control capabilities using IP and TCP/UDP controls to manage transmit and monitoring functions. A critical component of the project is ensuring strict adherence to DND security concepts, specifically regarding data integrity, authentication, and non-repudiation. Additionally, the contractor is responsible for developing firmware and software updates designed to prevent configuration loss during power failures. The ultimate goal of the engagement is the delivery of a fully functional UCS and a corresponding remote interface. The response deadline for this opportunity is December 10, 2026.

Government of Canada / Gouvernement du Canada

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Compliance, Laboratory, Environmental & Operator Reporting (CLEAR)

Solicitation # SRC0000041892

The Ohio EPA Division of Drinking and Ground Waters and the Division of Surface Water are seeking a vendor to develop and implement the Compliance, Laboratory, Environmental & Operator Reporting (CLEAR) project. This initiative involves creating a modernized, single web portal to consolidate and replace seven legacy data systems currently relying on MS Access, Excel, Java, and Oracle. The portal will streamline electronic submissions for electronic drinking water and discharge monitoring, lead service line inventories, laboratory certifications, asset management metrics, and operator certification and staffing reports. The solution must be PostgreSQL-compatible, delivered via CloudFormation templates, and self-hosted within the Ohio EPA AWS State Cloud ECS Fargate environment. Key technical requirements include full compliance with DOJ Title II Digital Accessibility standards (WCAG 2.1 AA), integration with State OH|ID Single Sign-On, and adherence to CROMERR standards for electronic signatures. The vendor is responsible for developing data crosswalks and SQL scripts to migrate millions of records from legacy systems to AWS PostgreSQL. The project will follow a phased delivery approach, starting with electronic discharge and drinking water solutions. Following implementation, the contract requires annual software maintenance consisting of 600 hours per year. The project is a formal solicitation awarded to the lowest responsive and responsible bidder, with a target for completion and go-live by June 2027, although a final timeline will be established upon award.

Epa932000 Pm-its Info Tech Service Lzrs, Epa950000 Pm-fiscal Administration Lzrs

POSTED

about 5 hours ago

DEADLINE

NG911 Call Handling Software & LicensingThis subcontract for the White County Board of Commissioners in Georgia involves the supply and configuration of NG911 compliant call handling software. The scope of work includes providing necessary software licenses, configuring administrative and emergency voice call routing, and implementing critical location information services and text-to-911 capabilities. The ultimate goal is the delivery of a fully licensed and operational call handling software environment. To ensure security and regulatory adherence, the contractor must maintain CJIS compliance regarding access control and cybersecurity. Interested parties should note that the response deadline is December 4, 2026, and the project falls under NAICS code 541511 for custom computer programming services.

White County Board of Commissioners

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Accessibility Compliance Testing and RemediationThis subcontract focuses on providing accessibility compliance testing and remediation services for prime contractors working on projects for the Ohio Department of Public Safety. The scope of work involves conducting comprehensive audits of digital assets to ensure they meet WCAG 2.1 Level AA, Section 508 of the Rehabilitation Act, and ADA standards. To achieve this, the contractor will utilize specialized tools including JAWS, NVDA, and Axe to identify accessibility gaps. Beyond testing, the contractor is responsible for developing and executing remediation plans to bring non-conforming assets into compliance. Key deliverables include the provision of remediated digital assets and the creation of accessibility conformance reports, specifically Voluntary Product Accessibility Templates. This engagement falls under NAICS code 541511 and is managed through the Ohio Department of Public Safety's Information Technology division.

Dps760000 Information Technology Cdsb, Dps-dept Of Public Safety

POSTED

about 11 hours ago

DEADLINE

Custom Data Filter and Protocol Adapter EngineeringThis subcontract opportunity, titled Custom Data Filter and Protocol Adapter Engineering, involves the development of custom software filters and adapters for prime contractors supporting U.S. Army PdM COMSEC projects. The primary objective is to sanitize tactical and geospatial data through the authoring and testing of schema filter rules for various formats, including NITF 2.1, GeoTIFF, KML/KMZ, and tactical messaging such as CoT, USMTF, and Link 16. The project requires the use of Deep Content Inspection tools and schema validation engines to deliver functional software modules. Managed by the Department of Defense under agency W6QK Acc-Apg, the contract falls under NAICS code 541511. The solicitation was posted on November 2, 2026, with a response deadline of November 20, 2026. The scope of work focuses on high-level technical engineering to ensure data integrity and security across critical military communication protocols.

POSTED

about 12 hours ago

DEADLINE

Pharmacy E-Commerce & Order Management System (OMS)The Pharmacy E-Commerce and Order Management System subcontract, issued by Nac Prime Vendor for the Department of Veterans Affairs, focuses on the development and hosting of a digital platform to streamline ordering and transaction visibility for PPV 2028 projects. The system will provide FSS CDPs with a dedicated portal to track order acceptance, shipment status, and delivery confirmations through the implementation of API integrations. To ensure the security and privacy of sensitive data, the contractor must adhere to strict regulatory requirements, including HIPAA compliance, FedRAMP authorization, and NIST security standards. The primary objective of the engagement is the delivery of a fully functional ordering and transaction visibility platform under NAICS code 541511.

Nac Prime Vendor (36W797)

POSTED

about 12 hours ago

DEADLINE

Surrogate Emulation and Quantitative Analysis Framework DevelopmentThe Surrogate Emulation and Quantitative Analysis Framework Development is a subcontract through the Department of Defense, specifically Washington Headquarters Services, under NAICS code 541511. The project focuses on developing specialized software layers for prime contractors on OSW CAPE projects to facilitate the ingestion of simulation data and the hosting of machine learning models. Key deliverables include an extensible data staging and pipeline integration framework along with a self-service visualization layer designed for sensitivity analysis. Technical execution requires the integration of a diverse stack including Python, R, Java, containers, GAMS, LLMs, and PyTorch. The resulting software must be deployed and maintained within a secure IL6 environment to ensure a fully functional framework for surrogate emulation and quantitative analysis.

Washington Headquarters Services

POSTED

about 12 hours ago

DEADLINE

Educational Software Integration & HostingThis subcontract for Educational Software Integration and Hosting supports prime contractors on Department of Defense Education Activity projects. The primary objective is to deliver an integrated and accessible digital learning platform by performing technical integration and hosting services. Key technical requirements include integrating resources with Google Classroom and the Schoology LMS through ClassLink SSO, as well as implementing LTI versions, QTI-conformant assessments, and IMS Global content packaging. To ensure security and compliance, the provider must maintain FedRAMP Level 2 certification. The opportunity falls under NAICS code 541511 and was posted on November 2, 2026, with a response deadline of November 13, 2026.

DOD Education Activity

POSTED

about 12 hours ago

DEADLINE

NSA Type-I Encryption IntegrationThis subcontract with the Department of the Air Force focuses on the supply and integration of secure communication hardware and software for prime contractors working on Department of Defense and Space Force communication satellite projects. The scope of work involves implementing NSA Type-I encryption and decryption, utilizing NSA-approved encryption modules and secure cryptographic hardware to develop both narrowband telemetry, tracking, and command capabilities and wideband mission communications. The primary objective is the delivery of a certified secure communication subsystem. To achieve this, the contractor must ensure all systems meet rigorous NSA certification standards for Type-I encryption. This effort falls under NAICS code 541511, with a response deadline set for November 24, 2026.

Department Of The Air Force

POSTED

about 12 hours ago

DEADLINE

3.45 GHz Engineering Support for Enduring Coordination (3-ESEC) Notice of Intent to Sole Source

Solicitation # 632775910

Defense Information Systems Agency

POSTED

about 12 hours ago

DEADLINE

7A--SOURCES SOUGHT NOTICE

Solicitation # 140D0427Q0886

Ibc Acq Svcs Directorate (00004)

POSTED

about 12 hours ago

DEADLINE

Notice of Intent to Award Sole Source

Solicitation # M6786127Q0004

Director Of Contracting

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

Hydraulic Component SupplyThis subcontract, titled Hydraulic Component Supply, is issued by the Department of Defense under the FA9101 AEDC Pkp Procurement Branch. The contract focuses on the procurement and delivery of raw materials and specialized hydraulic components for prime contractors working on Arnold Engineering Development Complex projects. Required deliverables include high-performance hardware such as precision valves, actuators, high-pressure hoses, and specialized hydraulic fluid, all of which must be delivered directly to the project site. The opportunity is designated as a Total Small Business Set Aside under NAICS code 333995. It was posted on November 2, 2026, with a response deadline of November 6, 2026. The place of performance for this contract is located in Silver Spring.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 12 hours ago

DEADLINE

Hydraulic System Installation & CommissioningThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the installation and commissioning of new hydraulic systems. The selected contractor will be responsible for the on-site installation of fabricated components and piping connections, as well as system start-up and performance testing. All work must adhere to strict quality control protocols to ensure the delivery of a fully operational hydraulic motion system. The project is designated as a total Small Business Set Aside under NAICS code 238220, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and the deadline for responses set for November 6, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 12 hours ago

DEADLINE

On-Site Demolition & RemovalThis subcontract opportunity, titled On-Site Demolition and Removal, is issued by the Department of Defense through the FA9101 AEDC Procurement Branch. The project involves the demolition and removal of legacy hydraulic motion system components for prime contractors at the Arnold Engineering Development Complex. Key tasks include the on-site demolition of old hydraulic lines and the removal of legacy pumps and actuators using industrial demolition tools and rigging equipment to ensure the site is cleared for new system installations. The contract is designated as a Total Small Business Set Aside under NAICS code 333996. Performance will take place in Silver Spring, zip code 20903. The solicitation was posted on November 2, 2026, with a response deadline of November 6, 2026.

Fluid Power Pump and Motor Manufacturing

POSTED

about 12 hours ago

DEADLINE

Hydraulic Component Fabrication & ManufacturingThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the fabrication and pre-assembly of core hydraulic system components. The selected contractor will be responsible for off-site manufacturing of custom components, the pre-assembly of hydraulic circuits, and rigorous factory testing utilizing precision machining tools. Once completed, all fabricated components must be delivered to the project site to support prime contractors. The project is designated as a total Small Business Set Aside under NAICS code 333999, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Hydraulic System Design & EngineeringThis small business set-aside subcontract, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, focuses on the detailed engineering and design of high-performance hydraulic motion systems. The selected contractor will be responsible for developing technical approaches, system designs, and engineering specifications to establish a comprehensive roadmap for fabrication and installation. Key deliverables include the final engineering design package, technical specifications, and all necessary approved design documents. The project falls under NAICS code 541330 and is designated for performance in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

Sensor & Instrumentation SupplyThis subcontract, managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, involves the supply of high-precision force and displacement sensors for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The scope of work includes the procurement and delivery of high-resolution displacement measurement systems and advanced 6-DOF force/moment sensor arrays that support real-time dynamic feedback. All delivered equipment must be accompanied by necessary calibration certifications to ensure operational accuracy. The performance of this contract will take place at Wright Patterson AFB. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026. The requirement falls under NAICS code 334517, focusing on the specialized instrumentation needed for advanced aerospace testing and measurement.

Irradiation Apparatus Manufacturing

POSTED

about 12 hours ago

DEADLINE

Facility Site Preparation & Utility ModificationThis subcontract for Facility Site Preparation and Utility Modification involves performing critical infrastructure work for prime contractors at Wright-Patterson AFB Building 31A Area B. The scope of work focuses on executing industrial electrical upgrades and civil foundation modifications to support Air Force Headquarters Air Force Test Center projects. All activities must be completed in strict accordance with local building codes and Air Force base facility standards to ensure a fully prepared installation site. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project falls under NAICS code 238210. The contract was posted on November 2, 2026, with a response deadline of December 2, 2026. The primary objective is the delivery of necessary power and foundation supports required for subsequent project phases.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 12 hours ago

DEADLINE

High-Capacity Load Frame & Table FabricationThis subcontract involves the manufacture of a high-load, multi-axis dynamic load frame and a high-capacity table to support prime contractors on projects for the Air Force Headquarters Air Force Test Center. The scope of work encompasses material procurement, heavy industrial fabrication, and the factory integration of load-bearing structures. To ensure structural integrity and safety, the contractor must provide material certifications verifying that all components can handle the specified high-load capacities. The project is managed under the Department of Defense through the FA9101 Aedc Pkp Procurement Branch, with performance taking place at Wright Patterson AFB. Classified under NAICS code 332312, the contract requires the final delivery of the fully fabricated and integrated load frame and table assembly. Interested parties must adhere to the response deadline of December 2, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 12 hours ago

DEADLINE

Precision Component Fabrication (Custom Mounting Socket)This subcontract, titled Precision Component Fabrication (Custom Mounting Socket), involves the production of a custom cantilevered carriage mounting socket for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The work requires high-precision CNC machining based on 3D CAD models to guarantee that the final physical component is fully compatible with both the software and physical interfaces of the 168 inch Internal Dynamometer and the Joint Multi-Purpose Dynamometer. Managed by the Department of Defense under the FA9101 Aedc Pkp Procurement Branch, the project is categorized under NAICS code 332710. Performance of the contract will take place at Wright Patterson AFB. The solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

POSTED

about 12 hours ago

DEADLINE

Structural Engineering & Design (Prototype A)The Structural Engineering and Design (Prototype A) subcontract involves providing specialized engineering design and modeling services for prime contractors supporting the Department of Defense, specifically for the Air Force Headquarters Air Force Test Center. The primary objective is the development of a high-load, multi-axis dynamic load frame. The scope of work includes creating verified engineering models, conducting detailed stress analyses, and producing 3D CAD models and machining drawings that adhere to specific Key Performance Parameters and Key System Attributes. The project will be performed at Wright Patterson AFB under NAICS code 541330. Key deliverables for this engagement include a comprehensive Critical Design Review package, formal stress analysis reports, and validated 3D CAD models. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

RWP - Extreme Loads Tire Force Machine (ELTFM)

Solicitation # FA9101279ELTFM

The Department of the Air Force, through the Headquarters Air Force Test Center (AFTC/PZ), is seeking a prototype for an Extreme Loads Tire Force Machine (ELTFM) to replace a legacy system that cannot meet current high vertical and lateral load requirements for military aircraft heavy-tire qualification. This high-capacity dynamic test machine is designed to bridge the operational gap between static load presses and high-speed dynamometer force testing. The project involves the design, modeling, manufacture, and installation of a multi-axis dynamic load frame integrated with a high-capacity table, precision sensors, and a LabVIEW-based real-time data acquisition and control system. The final system will be installed and commissioned at Wright-Patterson AFB in Ohio, specifically within Building 31A Area B. This acquisition is conducted under Other Transaction Authority (OTA) pursuant to 10 U.S.C. § 4022, targeting small businesses, nonprofits, or nontraditional defense contractors. The project is structured into two primary phases: Prototype A, focusing on the design and interface architecture, and Prototype E, covering physical assembly, factory and site acceptance testing, and operational commissioning. Pricing is hybrid, utilizing firm-fixed-price for base design milestones and unpriced, unfunded optional milestones for the execution phase based on rough order of magnitude estimates. Evaluation will be based on key performance parameters, system attributes, and interface commonality with the Joint Multi-Purpose Dynamometer. Due to the nature of the work, performers must comply with CMMC Level 2 and CUI cybersecurity requirements and provide a formal statement regarding Government Purpose Rights for intellectual property.

Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Tunnel 9 Pitch Upgrade

Solicitation # FA9101T9PU

The Arnold Engineering Development Complex (AEDC) Tunnel 9 in Silver Spring, Maryland, requires the comprehensive modernization of a high-performance hydraulic motion system. This Firm-Fixed-Price (FFP) requirement, designated as a total Small Business Set Aside under NAICS 332912, encompasses the design, engineering, procurement, off-site fabrication, pre-assembly, on-site demolition, installation, and commissioning of core system components. Key deliverables include a primary control valve with a step response time of 55 ms or less, a main actuating cylinder with a 120.5 inch working stroke capable of 13 ft/s linear speed, a Hydraulic Power Unit (HPU), and a dedicated filtration and cooling kidney loop. All components must adhere to ASME B31.1, ASME BPVC VIII, and ISO 4406 standards. The project is structured in three phases: engineering and design, manufacturing and testing, and disassembly, installation, and start-up. The delivery schedule for the primary requirement is 46 weeks from the lead time event. Award will be based on a combination of technical capability, evaluated on an acceptable/unacceptable basis via a Contractor Statement of Work, past performance on similar hydraulic systems, and price reasonableness. Contractors must comply with strict Department of Defense marking and reporting requirements, including MIL-STD-130 for unique item identification and the use of the Wide Area WorkFlow (WAWF) system for invoicing. Additionally, offerors must meet specific Cybersecurity Maturity Model Certification (CMMC) level requirements and provide a CMMC UID in their proposal.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Foundation Sustainment Services (FS2) Bridge Notice of Intent

Solicitation # FS2_Bridge_NOI

National Geospatial-Intelligence Agency

POSTED

about 12 hours ago

CLOSED

N6852027R1003: Naval Air Systems Command (NAVAIR) Depot Maintenance System (NDMS) IT Program/Project Functional Requirements and Software Lifecycle Support (ITPSS) Request for Proposal (RFP)

Solicitation # N6852027R1003

Department Of The Navy

POSTED

about 12 hours ago

DEADLINE

GIS Database Design and SDSFIE Implementation

W072 Endist Huntington

POSTED

DEADLINE

Enterprise Software Development and Maintenance

NASA Goddard Space Flight Center

POSTED

DEADLINE

Conversational Human-Machine Interface (CHMI) Development

Naval Air Warfare Center Air Division

POSTED

DEADLINE

Medical Product Cybersecurity and Software Development

FDA Office Of Acq Grant Svcs

POSTED

DEADLINE

AI Model Evaluation and Trustworthy AI Testing

Technology Acquisition Center Nj (36C10B)

POSTED

DEADLINE

Interactive Customization & Digital Proofing Module

DLA Troop Support

POSTED

DEADLINE

Federal Backend Integration Services

DLA Troop Support

POSTED

DEADLINE

Software Development: Toolchain & FTG Infrastructure

FA2057 Aflcmc Hnjk

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS