Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

On-Site Demolition & Removal

Active

Federal

Response Deadline11/06/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, titled On-Site Demolition and Removal, is issued by the Department of Defense through the FA9101 AEDC Procurement Branch. The project involves the demolition and removal of legacy hydraulic motion system components for prime contractors at the Arnold Engineering Development Complex. Key tasks include the on-site demolition of old hydraulic lines and the removal of legacy pumps and actuators using industrial demolition tools and rigging equipment to ensure the site is cleared for new system installations. The contract is designated as a Total Small Business Set Aside under NAICS code 333996. Performance will take place in Silver Spring, zip code 20903. The solicitation was posted on November 2, 2026, with a response deadline of November 6, 2026.

General Info

DoD small business subcontract for hydraulic system demolition and removal in Silver Spring.

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

NAICS

333996 - Fluid Power Pump and Motor Manufacturing

Place of Performance

Silver Spring, MD, 20903, USA

Set-Aside

SBA

Documents

This scope was carved out of FA9101T9PU.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Tunnel 9 Pitch Upgrade

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 04:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs demolition and removal of legacy hydraulic motion system components for prime contractors on Arnold Engineering Development Complex (AEDC) projects. Executes on-site demolition of old hydraulic lines and removal of legacy actuators and pumps using industrial demolition tools and rigging equipment for heavy components. Delivers a cleared site ready for new system installation.

Similar Contracts

Same NAICS industry code

Supply of Cylinder Assembly, Actuating, Linear (NSN 3040011017461)This subcontract involves the supply of four linear actuating cylinder assemblies, identified by NSN 3040011017461, for the DLA Weapons Support Strategic Acquisition Program Directorate under the Department of Defense. The selected provider is responsible for manufacturing or sourcing these units using precision machining and assembly equipment, ensuring all items are packaged and marked in strict accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. Eligible contractors must possess a valid CAGE code and Unique Entity Identifier to participate. The opportunity falls under NAICS code 333996, with a response deadline set for November 17, 2026. This requirement supports prime contractors in fulfilling broader DLA supply obligations.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

Solicitation # 70ZU0227Q40013B00

The United States Coast Guard Surface Forces Logistics Center is soliciting quotes for a firm-fixed-price purchase order under solicitation 70ZU0227Q40013B00. This is a Brand Name Only procurement for two seawater pumps, part number 480-7095, manufactured by Caterpillar Defense (NSN 4320 01-667-3440). The requirement is a total small business set-aside, and interested vendors must be authorized distributors and provide an authorized distributor letter from the original equipment manufacturer. Quotes are due by November 6, 2026, and the required delivery date is January 19, 2027. The contract requires shipping via FOB Destination to the USCG SFLC receiving room in Baltimore, Maryland. All items must be individually packed in specific wood-cleated panelboard or heavy-duty screwed wooden boxes and marked according to MIL-STD-129R and ISO/IEC-16388-2007 standards. Vendors must maintain active registration in SAM.gov, and payments will be processed Net 30 through the Invoice Processing Platform. Compliance with various FAR clauses is required, including those regarding the Buy American Act, prompt payment, and supply chain security.

POSTED

about 12 hours ago

DEADLINE

Pump Unit, Hydraulic

Solicitation # SPRDL1-26-R-A019

Solicitation SPRDL1-27-R-A027 is a 100% Total Small Business Set-Aside for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract to provide Hydraulic Pump Units (NSN 4320-01-432-6208, PN 12395352). The contract is a Firm Fixed Price (FFP) requirement with a guaranteed minimum quantity of 65 units and a maximum ceiling of 406 units over the five-year period. The first delivery order is for 65 units, with a required delivery rate of three units every thirty days. Delivery timelines are set at 330 days if First Article Testing (FAT) is required, or 240 days if FAT is waived or not required. All shipments are FOB Destination and must be performed within the Continental United States (CONUS). The procurement includes stringent quality and technical requirements, including Higher-Level Contract Quality (FAR 52.246-11), MIL-STD-1916, and specific pretreatment and CARC painting standards. A First Article Test is required unless a waiver is granted. Because the technical data is export controlled, offerors must be certified under the United States/Canada Joint Certification Program (JCP) and sign a Non-Disclosure Agreement to access the Technical Data Package. Proposals must be submitted via email to the Contract Specialist by November 30, 2026. Evaluation will be based on the lowest evaluated offer or best value, with specific evaluation factors applied to unused government surplus property and Critical Safety Item coordination.

DLA Land Warren

POSTED

about 12 hours ago

DEADLINE

Synopsis for Hand Pump Assembly, NSN: 4320-01-201-0814

Solicitation # W912CH-27-B-A006

The Army Contracting Command Detroit Arsenal is conducting market research via a Sources Sought Notice for the procurement of Hand Pump Assemblies, NSN 4320-01-201-0814, Part Number 9338160, for the M1 Abrams weapons system. This effort is intended to result in a Firm-Fixed Price contract with an estimated quantity of 405 units and a 100 percent buying option. The procurement is designated as a 100 percent Small Business Set-Aside under NAICS code 333996. Interested vendors must be registered in the System for Award Management and certified under the United States/Canada Joint Certification Program to access the export-controlled Technical Data Package, which is restricted to Distribution D. To be considered, respondents must provide their business size, production lead times, sustainable monthly production rates, and verification of a current DD 2345 Military Critical Technical Data Agreement on file with the Defense Logistics Information Service. Responses to the market research survey are due to the contract specialist by October 30, 2026.

POSTED

about 12 hours ago

DEADLINE

Supply of Safety Relief Valve Parts Kit (P/N D559B-8M-6KIT)This subcontract involves the supply of a specialized Safety Relief Valve Parts Kit, specifically Circor Aerospace part number D559B-8M-6KIT, to support prime contractors for Defense Logistics Agency Weapons Support Maritime Hardware and Electrical contracts. The required hardware features a brass body, a 1 inch male NPT inlet, and a set pressure of 6 PSI. All deliverables must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-B-117 standards. The contract requires the delivery of one completed parts kit to be performed at JBPHH within 20 days of the award. Interested parties must respond by November 12, 2026, for this Department of Defense requirement categorized under NAICS code 333996.

Defense Logistics Agency

POSTED

DEADLINE

SEPARATOR ASSEMBLY

Solicitation # SPE7M2-27-T-0630

Solicitation SPE7M2-27-T-0630 is a Request for Quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 39 Separator Assemblies, identified by NSN 4320-01-245-0860. This critical application item must be manufactured in accordance with Basic Drawing NR 53711 803-5773203, Revision G, dated March 14, 2018. The procurement is designated as a total small business set-aside under NAICS code 333996. Delivery is required within 416 days after order, with a need ship date of January 3, 2028, and a final required delivery date of January 22, 2028. Shipping is FOB Origin, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including a manufacturer inspection system that complies with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements per DLA RP001. A notable safety restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Administrative requirements include the use of Wide Area WorkFlow for invoicing and payment, and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

PUMP, RECIPROCATING

Solicitation # SPE7M1-27-T-1862

Solicitation SPE7M1-27-T-1862 is issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 17 reciprocating pumps, including filters, under NSN 4320-01-277-4631. The contractor is required to provide one manufacturer's commercial manual per unit, covering operation, services, maintenance, repair instructions, and a complete parts list. Delivery is specified as FOB Destination, with a delivery window of 46 days after receipt of order. The place of performance is located in Tracy, California. The contract is a total small business set-aside under FAR 19.5 and requires compliance with the Buy American and Balance of Payments Program. Technical and quality requirements are governed by the DLA Master List (RA001), and packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and strict adherence to cybersecurity reporting and hazardous material labeling standards.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-U-0999

Solicitation SPE7M1-27-U-0999 is issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Jet Ejectors, identified by NSN 4320002170938. This is a fixed-price requirement for an estimated quantity of 47 units with a delivery timeline of 168 days. The procurement is conducted under the First Destination Transportation program, requiring offers to be submitted as FOB Origin. Inspection and acceptance will occur at the destination. The contract is a restricted source item requiring engineering source approval from the government design control activity. It mandates strict adherence to technical and quality requirements via the DLA Master List, including CMMC Level 2 self-assessment and prohibitions on the use of mercury or class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system. This solicitation is not a small business set-aside, and quotations are due by November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # IW269727

The Texas Department of Criminal Justice is seeking bids under solicitation number IW269727 to establish a purchase order for the procurement of water pumps to be used in Lovelady, Texas. This SLED organization opportunity is categorized under NAICS code 333996. The solicitation was posted on October 30, 2026, with a response deadline of November 6, 2026. Nahomy Pabon serves as the primary point of contact for this procurement. All bids must be submitted electronically through the Euna Procurement Bonfire portal. The system supports major web browsers including Microsoft Edge, Google Chrome, and Mozilla Firefox. Prospective vendors are advised to verify their submissions after receiving a Submission Complete status and to monitor the electronic bid system for any public notices regarding amendments. Respondents maintain the ability to resubmit or provide a new response until the advertised due date and time.

Texas Department of Criminal Justice

POSTED

DEADLINE

PARTS KIT, CENTRIFUG

Solicitation # SPE7M1-27-T-1089

Solicitation SPE7M1-27-T-1089 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of eight centrifuge parts kits, identified by NSN 4320-01-601-1902 and John Crane P/N 819344-48N2-RPR. The requirement is for delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with terms set as FOB Origin. The delivery period is 110 days after order, with a need ship date of October 29, 2024. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. A critical safety requirement prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components as defined by NAVSEA. Offerors must submit quotes via the DIBBS system and comply with the Buy American Act and Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and maintenance of registration in the System for Award Management.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PUMP, RECIPROCATING, DIR

Solicitation # SPE7M0-27-T-0184

Solicitation SPE7M0-27-T-0184 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one reciprocating, direct acting pump, identified by NSN 4320-01-738-3544 and Fairbanks Morse part number M99011659. The procurement requires delivery within five days after order, with an original required delivery date of October 2, 2026. Shipping is FOB Origin, with inspection and acceptance occurring at the destination. The item is destined for the USS Harrisburg LPD-30, with specific delivery addresses provided for both parcel post in Pascagoula, Mississippi, and freight in Gulfport, Mississippi. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and combating trafficking in persons. All quotes must be submitted electronically via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

SSB TFF Motor and Pump Repairs (CGB)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for motor and pump repairs within the California-Great Basin region. This procurement effort is categorized under NAICS code 333996 and is managed by the agency's acquisition office to ensure the continued functionality of critical infrastructure. The forecast was posted on October 30, 2026, and is currently listed as a forecast type. Interested parties may coordinate with Kelli Jasperson or Small Business Specialist Nandini Johnson for further information regarding this requirement.

Bureau of Reclamation

POSTED

DEADLINE

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

Hydraulic Component SupplyThis subcontract, titled Hydraulic Component Supply, is issued by the Department of Defense under the FA9101 AEDC Pkp Procurement Branch. The contract focuses on the procurement and delivery of raw materials and specialized hydraulic components for prime contractors working on Arnold Engineering Development Complex projects. Required deliverables include high-performance hardware such as precision valves, actuators, high-pressure hoses, and specialized hydraulic fluid, all of which must be delivered directly to the project site. The opportunity is designated as a Total Small Business Set Aside under NAICS code 333995. It was posted on November 2, 2026, with a response deadline of November 6, 2026. The place of performance for this contract is located in Silver Spring.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 12 hours ago

DEADLINE

Hydraulic System Installation & CommissioningThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the installation and commissioning of new hydraulic systems. The selected contractor will be responsible for the on-site installation of fabricated components and piping connections, as well as system start-up and performance testing. All work must adhere to strict quality control protocols to ensure the delivery of a fully operational hydraulic motion system. The project is designated as a total Small Business Set Aside under NAICS code 238220, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and the deadline for responses set for November 6, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 12 hours ago

DEADLINE

Hydraulic Component Fabrication & ManufacturingThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the fabrication and pre-assembly of core hydraulic system components. The selected contractor will be responsible for off-site manufacturing of custom components, the pre-assembly of hydraulic circuits, and rigorous factory testing utilizing precision machining tools. Once completed, all fabricated components must be delivered to the project site to support prime contractors. The project is designated as a total Small Business Set Aside under NAICS code 333999, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Hydraulic System Design & EngineeringThis small business set-aside subcontract, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, focuses on the detailed engineering and design of high-performance hydraulic motion systems. The selected contractor will be responsible for developing technical approaches, system designs, and engineering specifications to establish a comprehensive roadmap for fabrication and installation. Key deliverables include the final engineering design package, technical specifications, and all necessary approved design documents. The project falls under NAICS code 541330 and is designated for performance in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

Sensor & Instrumentation SupplyThis subcontract, managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, involves the supply of high-precision force and displacement sensors for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The scope of work includes the procurement and delivery of high-resolution displacement measurement systems and advanced 6-DOF force/moment sensor arrays that support real-time dynamic feedback. All delivered equipment must be accompanied by necessary calibration certifications to ensure operational accuracy. The performance of this contract will take place at Wright Patterson AFB. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026. The requirement falls under NAICS code 334517, focusing on the specialized instrumentation needed for advanced aerospace testing and measurement.

Irradiation Apparatus Manufacturing

POSTED

about 12 hours ago

DEADLINE

Facility Site Preparation & Utility ModificationThis subcontract for Facility Site Preparation and Utility Modification involves performing critical infrastructure work for prime contractors at Wright-Patterson AFB Building 31A Area B. The scope of work focuses on executing industrial electrical upgrades and civil foundation modifications to support Air Force Headquarters Air Force Test Center projects. All activities must be completed in strict accordance with local building codes and Air Force base facility standards to ensure a fully prepared installation site. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project falls under NAICS code 238210. The contract was posted on November 2, 2026, with a response deadline of December 2, 2026. The primary objective is the delivery of necessary power and foundation supports required for subsequent project phases.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 12 hours ago

DEADLINE

High-Capacity Load Frame & Table FabricationThis subcontract involves the manufacture of a high-load, multi-axis dynamic load frame and a high-capacity table to support prime contractors on projects for the Air Force Headquarters Air Force Test Center. The scope of work encompasses material procurement, heavy industrial fabrication, and the factory integration of load-bearing structures. To ensure structural integrity and safety, the contractor must provide material certifications verifying that all components can handle the specified high-load capacities. The project is managed under the Department of Defense through the FA9101 Aedc Pkp Procurement Branch, with performance taking place at Wright Patterson AFB. Classified under NAICS code 332312, the contract requires the final delivery of the fully fabricated and integrated load frame and table assembly. Interested parties must adhere to the response deadline of December 2, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 12 hours ago

DEADLINE

Precision Component Fabrication (Custom Mounting Socket)This subcontract, titled Precision Component Fabrication (Custom Mounting Socket), involves the production of a custom cantilevered carriage mounting socket for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The work requires high-precision CNC machining based on 3D CAD models to guarantee that the final physical component is fully compatible with both the software and physical interfaces of the 168 inch Internal Dynamometer and the Joint Multi-Purpose Dynamometer. Managed by the Department of Defense under the FA9101 Aedc Pkp Procurement Branch, the project is categorized under NAICS code 332710. Performance of the contract will take place at Wright Patterson AFB. The solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

POSTED

about 12 hours ago

DEADLINE

Control Systems & DAQ Software DevelopmentThis subcontract opportunity involves the development of real-time data acquisition and control software modeling for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The scope of work focuses on modeling control software to synchronize heavy motion control systems with speed regulation under massive drag loads, while integrating real-time dynamic feedback from 6-DOF sensor arrays. The final deliverables include comprehensive software simulation models and a detailed DAQ/Control system architecture. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project will be performed at Wright Patterson AFB. Interested parties must ensure CMMC compliance to be eligible. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026, falling under NAICS code 541511.

Custom Computer Programming Services

POSTED

about 12 hours ago

DEADLINE

Structural Engineering & Design (Prototype A)The Structural Engineering and Design (Prototype A) subcontract involves providing specialized engineering design and modeling services for prime contractors supporting the Department of Defense, specifically for the Air Force Headquarters Air Force Test Center. The primary objective is the development of a high-load, multi-axis dynamic load frame. The scope of work includes creating verified engineering models, conducting detailed stress analyses, and producing 3D CAD models and machining drawings that adhere to specific Key Performance Parameters and Key System Attributes. The project will be performed at Wright Patterson AFB under NAICS code 541330. Key deliverables for this engagement include a comprehensive Critical Design Review package, formal stress analysis reports, and validated 3D CAD models. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

RWP - Extreme Loads Tire Force Machine (ELTFM)

Solicitation # FA9101279ELTFM

The Department of the Air Force, through the Headquarters Air Force Test Center (AFTC/PZ), is seeking a prototype for an Extreme Loads Tire Force Machine (ELTFM) to replace a legacy system that cannot meet current high vertical and lateral load requirements for military aircraft heavy-tire qualification. This high-capacity dynamic test machine is designed to bridge the operational gap between static load presses and high-speed dynamometer force testing. The project involves the design, modeling, manufacture, and installation of a multi-axis dynamic load frame integrated with a high-capacity table, precision sensors, and a LabVIEW-based real-time data acquisition and control system. The final system will be installed and commissioned at Wright-Patterson AFB in Ohio, specifically within Building 31A Area B. This acquisition is conducted under Other Transaction Authority (OTA) pursuant to 10 U.S.C. § 4022, targeting small businesses, nonprofits, or nontraditional defense contractors. The project is structured into two primary phases: Prototype A, focusing on the design and interface architecture, and Prototype E, covering physical assembly, factory and site acceptance testing, and operational commissioning. Pricing is hybrid, utilizing firm-fixed-price for base design milestones and unpriced, unfunded optional milestones for the execution phase based on rough order of magnitude estimates. Evaluation will be based on key performance parameters, system attributes, and interface commonality with the Joint Multi-Purpose Dynamometer. Due to the nature of the work, performers must comply with CMMC Level 2 and CUI cybersecurity requirements and provide a formal statement regarding Government Purpose Rights for intellectual property.

Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Tunnel 9 Pitch Upgrade

Solicitation # FA9101T9PU

The Arnold Engineering Development Complex (AEDC) Tunnel 9 in Silver Spring, Maryland, requires the comprehensive modernization of a high-performance hydraulic motion system. This Firm-Fixed-Price (FFP) requirement, designated as a total Small Business Set Aside under NAICS 332912, encompasses the design, engineering, procurement, off-site fabrication, pre-assembly, on-site demolition, installation, and commissioning of core system components. Key deliverables include a primary control valve with a step response time of 55 ms or less, a main actuating cylinder with a 120.5 inch working stroke capable of 13 ft/s linear speed, a Hydraulic Power Unit (HPU), and a dedicated filtration and cooling kidney loop. All components must adhere to ASME B31.1, ASME BPVC VIII, and ISO 4406 standards. The project is structured in three phases: engineering and design, manufacturing and testing, and disassembly, installation, and start-up. The delivery schedule for the primary requirement is 46 weeks from the lead time event. Award will be based on a combination of technical capability, evaluated on an acceptable/unacceptable basis via a Contractor Statement of Work, past performance on similar hydraulic systems, and price reasonableness. Contractors must comply with strict Department of Defense marking and reporting requirements, including MIL-STD-130 for unique item identification and the use of the Wide Area WorkFlow (WAWF) system for invoicing. Additionally, offerors must meet specific Cybersecurity Maturity Model Certification (CMMC) level requirements and provide a CMMC UID in their proposal.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

43--SEAL ASSEMBLY,SHAFT,SPRING LOADED

Solicitation # SPE7M1-27-U-0667

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

43--PUMP,HYDRAULIC

Solicitation # SPE7LX-27-U-0045

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

43--PUMP,CENTRIFUGAL

Solicitation # SPE7M1-27-U-0860

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS