Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Component Fabrication (Custom Mounting Socket)

Active

Federal

Response Deadline12/02/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Precision Component Fabrication (Custom Mounting Socket), involves the production of a custom cantilevered carriage mounting socket for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The work requires high-precision CNC machining based on 3D CAD models to guarantee that the final physical component is fully compatible with both the software and physical interfaces of the 168 inch Internal Dynamometer and the Joint Multi-Purpose Dynamometer. Managed by the Department of Defense under the FA9101 Aedc Pkp Procurement Branch, the project is categorized under NAICS code 332710. Performance of the contract will take place at Wright Patterson AFB. The solicitation was posted on November 2, 2026, with a response deadline set for December 2, 2026.

General Info

CNC machining of custom mounting sockets for Air Force dynamometer projects at Wright-Patterson.

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

NAICS

332710 - Machine Shops

Place of Performance

Wright Patterson AFB, OH, USA

Set-Aside

NONE

Documents

This scope was carved out of FA9101279ELTFM.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RWP - Extreme Loads Tire Force Machine (ELTFM)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineDec 2

Submission deadline

Response Deadline

12/02/2026, 10:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Machines a custom cantilevered carriage mounting socket for prime contractors on Air Force Headquarters Air Force Test Center projects. Performs precision CNC machining from 3D CAD models to ensure physical and software interface compatibility with the Joint Multi-Purpose Dynamometer (JMPD) and the 168" Internal Dynamometer. Delivers the physical custom cantilevered carriage mounting socket.

Similar Contracts

Same NAICS industry code

Manufacture of NSN 5935-00-355-4739This subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, requires the fabrication of 372 units of NSN 5935-00-355-4739. The manufacturer must produce these hardware components in strict accordance with Reference Drawing NR 80064 74210, Revision J, utilizing precision machining equipment to meet 1939 technical drawing specifications and DLA quality standards for the 5935 Federal Supply Class. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710, with the place of performance located in Bremerton, Washington. Interested parties must respond by November 13, 2026, to provide the necessary components for prime contractors delivering on DLA supply contracts.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Supply of Ring, Slip, Hand Guard (NSN 1005-00-087-8998)This subcontract through the Department of Defense DDSP New Cumberland Facility requires the procurement of 1,478 units of Ring, Slip, Hand Guard under NSN 1005-00-087-8998. The selected provider must manufacture or source these parts according to strict NSN specifications to support prime contractors delivering DLA Weapons Support contracts. Delivery is handled via FOB Origin, with performance taking place in New Cumberland. Eligible bidders must possess a valid CAGE code and ensure full compliance with defense telecommunications equipment regulations. The opportunity falls under NAICS code 332710, with a response deadline set for November 13, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Supply of Mechanical Drive Housings (NSN 3040016469810)This subcontract opportunity is for the supply of up to 45 precision-manufactured mechanical drive housings, identified by NSN 3040016469810, to support prime contractors under the DLA Weapons Support Strategic Acquisition Program Directorate. The required components must be produced via CNC machining, casting, or precision forging to ensure strict adherence to technical specifications and DLA quality standards. Eligible providers must possess a valid CAGE code to participate. The procurement is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 332710. Interested parties must submit their responses by November 17, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

Transmission Cover FabricationThis subcontract involves the fabrication of one Transmission Cover, part number 10002486-0102, for prime contractors supporting DLA Weapons Support projects. The work must be performed in accordance with NSN 2520-01-557-0886 and the DLA Master List of Technical and Quality Requirements RA001. Production requires the use of precision CNC milling, turning, and CMM inspection tools to ensure all dimensional specifications are verified. The project falls under NAICS code 332710 and is managed by the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament. Strict adherence to the Buy American Act and the Berry Amendment is required for this delivery. The performance location is listed as APO 09321, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication of specialized metal tube assemblies for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work includes precision machining, cutting, and threading of metal tubes to Class 3 thread standards, specifically adhering to Honeywell P/N 364893-1 to deliver completed assemblies under NSN 4710007644194. Performance will take place in Fort Bliss, Texas. Due to the handling of Covered Defense Information, the contractor is required to possess precision threading equipment and a CMMC Level 2 self-assessment. The project falls under NAICS code 332710 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Shoulder Shaft (NSN 3040016010945)This subcontract involves the manufacture and supply of precision-machined shoulder shafts, identified by NSN 3040016010945, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The project requires the fabrication of parts using CNC lathes and milling machines to meet specific technical requirements set by either Oshkosh Defense LLC PN 24KP270 or Iowa Mold Tooling Co Inc PN 52720821. Performance will take place at Camp Lejeune, with deliverables requiring packaging in accordance with MIL-STD-129 and ASTM D3951 standards. The contractor must ensure strict adherence to several regulatory mandates, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. This opportunity falls under NAICS code 332710 and was posted on November 2, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Shaft Assembly, Shouldered (NSN 3040014386187)This subcontract involves the manufacture or procurement of 215 units of a shouldered shaft assembly, identified as Trivent Engineering part number 3131602 and NSN 3040014386187. The components are intended for prime contractors fulfilling supply contracts for the Department of Defense, specifically under the DLA Weapons Support Strategic Acquisition Program Directorate. All production must strictly adhere to the DLA Master List of Technical and Quality Requirements. Compliance requirements include following MIL-STD-129 for marking and RP001 for palletization. Additionally, the provider must possess Engineering Source Approval and have completed a CMMC Level 2 self-assessment. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026, falling under NAICS code 332710.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Fabrication of Spray NozzlesThis subcontract involves the precision CNC machining and fabrication of 260 fluid-emulsion spray nozzles for the DLA Weapons Support Fluid Handling Division. All parts must be manufactured according to Basic Drawing NR 81361 116-3-162 Revision G and identified by NSN 4730-01-466-9556. The scope of work includes the completion of First Article Testing on 10 units and the provision of a Certificate of Conformance upon delivery of the finished nozzles. To be eligible, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and hold JCP Certification for handling ITAR and EAR data. Additionally, CMMC Level 2 compliance is required. The project is categorized under NAICS code 332710, with performance taking place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Supply of Collar PistonsThis subcontract involves the manufacture and supply of nine finished collar pistons for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The pistons must be fabricated to Siemens Energy part number 11043098 using precision CNC machining, with a strict prohibition on the use of additive manufacturing. All work must comply with the DLA Master List of Technical and Quality Requirements and the Buy American Act. The contractor is responsible for packaging and marking all items in accordance with MIL-STD-2073-1E and MIL-STD-129. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Machining of Shouldered Gear ShaftsThis subcontract involves the precision machining, turning, and grinding of seven shouldered gear shafts, part number RC31407, for the DLA Weapons Support Fluid Handling Division. The work requires the use of CNC lathes and grinders to ensure all components meet strict tolerances for critical application items, with full adherence to RA001 technical and quality requirements. The project is managed under NAICS code 332710 and will be performed at Robins Air Force Base. The final deliverable consists of seven finished, inspected, and certified gear shafts. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Bore Tube FabricationThis subcontract involves the manufacture of 4,891 precision-machined bore tubes for prime contractors supporting DLA Weapons Support Land projects. Fabrication must strictly adhere to Basic Drawing NR 19200 7266299 and Reference Drawing NR 19200 12579607, utilizing TDP Rev A Gen 1 and MIL-PRF-3150E specifications. All delivered units are required to pass a DCMA source inspection to ensure quality and compliance. To be eligible for this project, contractors must maintain JCP certification, CMMC Level 2, and full ITAR/EAR compliance. The work falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must respond by November 13, 2026, for performance located in zip code 76544.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Precision Fabrication of Angle Brackets (NSN 5340-00-810-7046)This subcontract involves the precision fabrication of 134 angle brackets under NSN 5340-00-810-7046 for the Department of Defense, specifically supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The manufacturer must adhere strictly to Government Design Control Activity specifications and ensure all units are marked, labeled, and packaged in accordance with MIL-STD-129 and ASTM D3951 standards. Performance of this contract requires the provider to hold JCP certification and maintain ITAR/EAR approval. The final deliverable consists of 134 finished and packaged brackets to be associated with operations at Tinker AFB. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

Hydraulic Component SupplyThis subcontract, titled Hydraulic Component Supply, is issued by the Department of Defense under the FA9101 AEDC Pkp Procurement Branch. The contract focuses on the procurement and delivery of raw materials and specialized hydraulic components for prime contractors working on Arnold Engineering Development Complex projects. Required deliverables include high-performance hardware such as precision valves, actuators, high-pressure hoses, and specialized hydraulic fluid, all of which must be delivered directly to the project site. The opportunity is designated as a Total Small Business Set Aside under NAICS code 333995. It was posted on November 2, 2026, with a response deadline of November 6, 2026. The place of performance for this contract is located in Silver Spring.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 12 hours ago

DEADLINE

Hydraulic System Installation & CommissioningThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the installation and commissioning of new hydraulic systems. The selected contractor will be responsible for the on-site installation of fabricated components and piping connections, as well as system start-up and performance testing. All work must adhere to strict quality control protocols to ensure the delivery of a fully operational hydraulic motion system. The project is designated as a total Small Business Set Aside under NAICS code 238220, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and the deadline for responses set for November 6, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 12 hours ago

DEADLINE

On-Site Demolition & RemovalThis subcontract opportunity, titled On-Site Demolition and Removal, is issued by the Department of Defense through the FA9101 AEDC Procurement Branch. The project involves the demolition and removal of legacy hydraulic motion system components for prime contractors at the Arnold Engineering Development Complex. Key tasks include the on-site demolition of old hydraulic lines and the removal of legacy pumps and actuators using industrial demolition tools and rigging equipment to ensure the site is cleared for new system installations. The contract is designated as a Total Small Business Set Aside under NAICS code 333996. Performance will take place in Silver Spring, zip code 20903. The solicitation was posted on November 2, 2026, with a response deadline of November 6, 2026.

Fluid Power Pump and Motor Manufacturing

POSTED

about 12 hours ago

DEADLINE

Hydraulic Component Fabrication & ManufacturingThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the fabrication and pre-assembly of core hydraulic system components. The selected contractor will be responsible for off-site manufacturing of custom components, the pre-assembly of hydraulic circuits, and rigorous factory testing utilizing precision machining tools. Once completed, all fabricated components must be delivered to the project site to support prime contractors. The project is designated as a total Small Business Set Aside under NAICS code 333999, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Hydraulic System Design & EngineeringThis small business set-aside subcontract, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, focuses on the detailed engineering and design of high-performance hydraulic motion systems. The selected contractor will be responsible for developing technical approaches, system designs, and engineering specifications to establish a comprehensive roadmap for fabrication and installation. Key deliverables include the final engineering design package, technical specifications, and all necessary approved design documents. The project falls under NAICS code 541330 and is designated for performance in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

Sensor & Instrumentation SupplyThis subcontract, managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, involves the supply of high-precision force and displacement sensors for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The scope of work includes the procurement and delivery of high-resolution displacement measurement systems and advanced 6-DOF force/moment sensor arrays that support real-time dynamic feedback. All delivered equipment must be accompanied by necessary calibration certifications to ensure operational accuracy. The performance of this contract will take place at Wright Patterson AFB. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026. The requirement falls under NAICS code 334517, focusing on the specialized instrumentation needed for advanced aerospace testing and measurement.

Irradiation Apparatus Manufacturing

POSTED

about 12 hours ago

DEADLINE

Facility Site Preparation & Utility ModificationThis subcontract for Facility Site Preparation and Utility Modification involves performing critical infrastructure work for prime contractors at Wright-Patterson AFB Building 31A Area B. The scope of work focuses on executing industrial electrical upgrades and civil foundation modifications to support Air Force Headquarters Air Force Test Center projects. All activities must be completed in strict accordance with local building codes and Air Force base facility standards to ensure a fully prepared installation site. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project falls under NAICS code 238210. The contract was posted on November 2, 2026, with a response deadline of December 2, 2026. The primary objective is the delivery of necessary power and foundation supports required for subsequent project phases.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 12 hours ago

DEADLINE

High-Capacity Load Frame & Table FabricationThis subcontract involves the manufacture of a high-load, multi-axis dynamic load frame and a high-capacity table to support prime contractors on projects for the Air Force Headquarters Air Force Test Center. The scope of work encompasses material procurement, heavy industrial fabrication, and the factory integration of load-bearing structures. To ensure structural integrity and safety, the contractor must provide material certifications verifying that all components can handle the specified high-load capacities. The project is managed under the Department of Defense through the FA9101 Aedc Pkp Procurement Branch, with performance taking place at Wright Patterson AFB. Classified under NAICS code 332312, the contract requires the final delivery of the fully fabricated and integrated load frame and table assembly. Interested parties must adhere to the response deadline of December 2, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 12 hours ago

DEADLINE

Control Systems & DAQ Software DevelopmentThis subcontract opportunity involves the development of real-time data acquisition and control software modeling for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The scope of work focuses on modeling control software to synchronize heavy motion control systems with speed regulation under massive drag loads, while integrating real-time dynamic feedback from 6-DOF sensor arrays. The final deliverables include comprehensive software simulation models and a detailed DAQ/Control system architecture. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project will be performed at Wright Patterson AFB. Interested parties must ensure CMMC compliance to be eligible. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026, falling under NAICS code 541511.

Custom Computer Programming Services

POSTED

about 12 hours ago

DEADLINE

Structural Engineering & Design (Prototype A)The Structural Engineering and Design (Prototype A) subcontract involves providing specialized engineering design and modeling services for prime contractors supporting the Department of Defense, specifically for the Air Force Headquarters Air Force Test Center. The primary objective is the development of a high-load, multi-axis dynamic load frame. The scope of work includes creating verified engineering models, conducting detailed stress analyses, and producing 3D CAD models and machining drawings that adhere to specific Key Performance Parameters and Key System Attributes. The project will be performed at Wright Patterson AFB under NAICS code 541330. Key deliverables for this engagement include a comprehensive Critical Design Review package, formal stress analysis reports, and validated 3D CAD models. The solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

RWP - Extreme Loads Tire Force Machine (ELTFM)

Solicitation # FA9101279ELTFM

The Department of the Air Force, through the Headquarters Air Force Test Center (AFTC/PZ), is seeking a prototype for an Extreme Loads Tire Force Machine (ELTFM) to replace a legacy system that cannot meet current high vertical and lateral load requirements for military aircraft heavy-tire qualification. This high-capacity dynamic test machine is designed to bridge the operational gap between static load presses and high-speed dynamometer force testing. The project involves the design, modeling, manufacture, and installation of a multi-axis dynamic load frame integrated with a high-capacity table, precision sensors, and a LabVIEW-based real-time data acquisition and control system. The final system will be installed and commissioned at Wright-Patterson AFB in Ohio, specifically within Building 31A Area B. This acquisition is conducted under Other Transaction Authority (OTA) pursuant to 10 U.S.C. § 4022, targeting small businesses, nonprofits, or nontraditional defense contractors. The project is structured into two primary phases: Prototype A, focusing on the design and interface architecture, and Prototype E, covering physical assembly, factory and site acceptance testing, and operational commissioning. Pricing is hybrid, utilizing firm-fixed-price for base design milestones and unpriced, unfunded optional milestones for the execution phase based on rough order of magnitude estimates. Evaluation will be based on key performance parameters, system attributes, and interface commonality with the Joint Multi-Purpose Dynamometer. Due to the nature of the work, performers must comply with CMMC Level 2 and CUI cybersecurity requirements and provide a formal statement regarding Government Purpose Rights for intellectual property.

Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Tunnel 9 Pitch Upgrade

Solicitation # FA9101T9PU

The Arnold Engineering Development Complex (AEDC) Tunnel 9 in Silver Spring, Maryland, requires the comprehensive modernization of a high-performance hydraulic motion system. This Firm-Fixed-Price (FFP) requirement, designated as a total Small Business Set Aside under NAICS 332912, encompasses the design, engineering, procurement, off-site fabrication, pre-assembly, on-site demolition, installation, and commissioning of core system components. Key deliverables include a primary control valve with a step response time of 55 ms or less, a main actuating cylinder with a 120.5 inch working stroke capable of 13 ft/s linear speed, a Hydraulic Power Unit (HPU), and a dedicated filtration and cooling kidney loop. All components must adhere to ASME B31.1, ASME BPVC VIII, and ISO 4406 standards. The project is structured in three phases: engineering and design, manufacturing and testing, and disassembly, installation, and start-up. The delivery schedule for the primary requirement is 46 weeks from the lead time event. Award will be based on a combination of technical capability, evaluated on an acceptable/unacceptable basis via a Contractor Statement of Work, past performance on similar hydraulic systems, and price reasonableness. Contractors must comply with strict Department of Defense marking and reporting requirements, including MIL-STD-130 for unique item identification and the use of the Wide Area WorkFlow (WAWF) system for invoicing. Additionally, offerors must meet specific Cybersecurity Maturity Model Certification (CMMC) level requirements and provide a CMMC UID in their proposal.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Solicitation # N00174-26-SIMACQ-M13-0046

Nswc Indian Head Division

POSTED

about 12 hours ago

DEADLINE

Handle, P2TC for Watervliet Arsenal

Solicitation # W911PT27QA022

POSTED

about 12 hours ago

DEADLINE

Solicitation # RFP384239

Fermilab - DOE Contractor

POSTED

about 12 hours ago

DEADLINE

Manufacture of Front Mounting Plates (NSN 6680-00-075-4106)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Sleeve Spacer (NSN 5365-01-727-8638)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of BRACKET, DA-129-131

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Plate Spacer (NSN 5365-12-359-6241)

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Precision Machining of Hydraulic Module Housing

POSTED

DEADLINE

Relief Poppet Assembly Supplier

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Lens Cap Fabrication and Assembly

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturer of Critical Safety Item (CSI) Tube Elbows

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Spacer, Lining Assembly (NSN 1560-01-052-0394)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS