Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SERVICE KIT

Active
SPE7M0-26-T-015YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a Service Kit under solicitation SPE7M0-26-T-015Y, with a single unit of item NSN 4940-01-687-7467, quantity one, to be delivered within five days from the required delivery date of July 20, 2026. Delivery is FOB origin, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special markings required. Palletization follows DLA’s packaging requirements, and all items must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The shipping and delivery address is the Carrier Outfitting Material Support Center in Suffolk, Virginia. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must receive prior approval unless explicitly permitted by specification. The contract incorporates all technical and quality requirements listed under R or I numbers from the DLA Master List, with the applicable revision determined by the solicitation issuance or award date. The unit of issue is EA, and the total price is based on a unit price of $1.00. Government-specific identifiers are included for tracking and logistics including RDD 777, project ZQ0 TP 1, and procurement request 7017552578. The primary point of contact is Audrey Acuna, with the contract issued under NAICS code 334220 by the Department of Defense.

General Info

Procurement of one Service Kit NSN 4940-01-687-7467, delivery due July 20, 2026, FOB origin, no parcel post, DLA packaging, $1.00 unit price.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

6701 COLLEGE DRIVE, DOORWAY 71, SUFFOLK, VA, 23435-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Audrey Acuna
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SERVICE KIT
SERVICE KIT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
NARDA HOLDINGS, INC. 94S46 P/N AF074-10/3.0-3.5/LMC
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017552578 0001 EA 1.000
NSN/MATERIAL:4940016877467
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPE7M0-26-T-015Y
SECTION B
PR: 7017552578 PRLI: 0001 CONT’D
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N48253
CARRIER OUTFITTING MATL SUPPORT CTR
6701 COLLEGE DRIVE, DOORWAY 71
SUFFOLK VA 23435-5000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N48253
CARRIER OUTFITTING MATL SUPPORT CTR
6701 COLLEGE DRIVE, DOORWAY 71
SUFFOLK VA 23435-5000
US
M/F: (TCN) N234686153A861
RDD: 777
PROJ: ZQ0 TP 1
SUPP ADD: N48253 SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: V9B ADV: 2L FC: V7
Need Ship Date:00/00/0000 Original Required Delivery Date:07/20/2026
SPE7M0-26-T-015Y NSN/Part Number: 4940-01-687-7467 Quantity: 1 EA Purchase Request: 7017552578QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
DIBBS
WAVEGUIDE ASSEMBLYThe contract is for the procurement of a single Waveguide Assembly with part number R17-3329 and NSN 5985-01-651-9165, manufactured by Microwave Engineering Corporation, under solicitation SPE7M0-26-T-015P. This is a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific compliance to revision E of reference drawing NR 1L4J7 684-8270004 dated 01/10/2018. The item must be produced using limited rights data accessible only to qualified vendors, and a classified drawing will be provided upon award following submission of a completed DD Form 254. The vendor must also achieve CMMC Level 2 self-assessment certification and comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special markings required. The unit of issue is EA, with a fixed quantity of one, and delivery must occur within five days at FOB origin, with inspection and acceptance also occurring at origin. Packaging and shipping must follow hazardous materials guidelines and use traceable freight methods—parcel post is prohibited. The delivery address is Tobyhanna Army Depot, with a required delivery date of July 21, 2026. The item is identified as a government-furnished property with specific tracking identifiers and is subject to cybersecurity and data protection mandates under covered defense information rules.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, CONNECTORThe contract is for three adapter connectors with NSN 5935-01-201-4810 under solicitation SPE7M5-26-T-338W, issued by the Department of Defense’s Active Devices Division. Delivery is required within 10 days of award, with a response deadline of August 3, 2026, and performance to occur at Fort Irwin, California, zip 92310-9986. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and DLA authorization may access the controlled data. The procurement is subject to DLA packaging requirements and mandates that the vendor hold CMMC Level 2 certification through a certified third-party assessment organization. The primary point of contact is Tate Shannon, reachable via email and phone listed in the contract data.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
MONITOR, TELEVISION
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
DIBBS
CONTROLLER-DISPLAYThe contract specifies the procurement of a Controller-Display item identified by NSN 5820-01-629-6503 and part number RWTT66, with a quantity of 46 units at a unit price of $46.00, totaling $2,116.00. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance. Inspection and acceptance occur at the origin, and the item is classified as a commercial item. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The packaging code U and container type E5 are mandated, and palletization must follow DLA packaging standards. Mercury and mercury-containing compounds are strictly prohibited in preservation, packaging, and marking unless explicitly exempted for functional uses such as specific batteries, lamps, or sensors under NAVSEA guidelines, with those exceptions requiring dual containment and shockproof design. Sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stated, with unspecified attributes treated as major. Attributes are to be assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Documentation for source approval is governed by RC001, and all requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The delivery address is the DLA Distribution facility in New Cumberland, PA, and transportation is subject to DLAD Proc Notes C19 and C20. The solicitation was issued on July 21, 2026, with responses due by July 29, 2026, under the NAICS code 334220, and the primary point of contact is Channon Dillard. The original required delivery date is December 22, 2026, with a needed ship date of January 17, 2027.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
Federal
13M Fiber Transmitter Modules for the Fairbanks Command and Data Acquisition Station (FCDAS)The U.S. Department of Commerce, through NOAA’s Acquisition and Grants Office, is seeking two replacement Ortel SITU3013 Fiber Transmitter Modules for the Fairbanks Command and Data Acquisition Station in Alaska, under RFQ 1332KP26Q0051. This procurement is strictly limited to the brand-name Ortel product due to the station’s proprietary X-Band fiber optic infrastructure, which requires exact matching of the 1550 nm wavelength and optical output profiles to ensure seamless integration with existing telemetry systems without any modifications. Only Ortel modules will be accepted; alternative brands are non-compliant and will be rejected. The acquisition is conducted under FAR Part 12 using simplified procedures and is classified as a 100% Total Small Business Set-Aside under NAICS code 334220, with a small business size standard of 1,250 employees. All bids must be submitted by August 3, 2026, and performance is required at the Fairbanks site, with inquiries directed to Trang Tran at NOAA’s Silver Spring office.
Department Of Commerce Noaa

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
Federal
58--MONITOR,TELEVISION
DLA Aviation

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
SLED
Optical Splitter Module SupplyDfw International Airport is seeking suppliers to provide one thousand four optical splitter modules for the expansion of its fiber optic network. The solicitation is classified as a subcontract and is open for responses until July 23, 2026, with the opportunity posted on July 20, 2026. The NAICS code 334220 identifies this procurement within the telecommunications equipment manufacturing sector. All modules must meet technical specifications required for seamless integration into the airport’s existing infrastructure to support increased bandwidth and network reliability. Performance of the contract is expected to occur at DFW Airport in Texas, though specific delivery logistics and technical requirements are not detailed in the provided data. Bidders must ensure compliance with all contractual obligations, including timely delivery and adherence to industry standards for optical component performance.
Dfw International Airport

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334220
New
SLED
Classroom Interactive Displays SupplyThe contract titled Classroom Interactive Displays Supply seeks the procurement and delivery of interactive display units, including smart boards and touch-enabled screens, to support classroom instruction. It is issued as a subcontract under NAICS code 334220, which pertains to the manufacturing of computer and peripheral equipment, indicating the emphasis on technologically advanced, education-focused hardware. The opportunity was posted on July 20, 2026, with a response deadline of August 10, 2026, giving potential vendors approximately three weeks to submit proposals. The awarding entity is MPTAP, representing the Mississippi Department of Finance and Administration, and the place of performance is within the state of Mississippi, though specific locations are not detailed. This initiative aims to modernize educational environments by providing schools with up-to-date interactive technology to enhance teaching and learning outcomes.
MPTAP

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 334220
New
DIBBS
Supplier of Covered Defense Telecommunications Equipment MonitoringThe contract requires suppliers to ensure compliance with DFARS 252.204-7018 by implementing rigorous screening procedures to identify and exclude prohibited telecommunications equipment, such as devices sourced from Huawei or ZTE, within embedded systems supplied to the Department of Defense. This obligation applies to all subcontractors involved in the supply chain for defense-related components, mandating end-to-end verification to prevent the introduction of any covered equipment that poses a national security risk. Suppliers must establish documented processes to trace component origins, maintain audit trails, and provide attestations of compliance as part of contract fulfillment. The scope is tied to NAICS code 334220, indicating focus on electronic component manufacturing, and the contract is categorized as a subcontract under the Defense Logistics Agency. Performance is expected to align with Department of Defense security standards across all locations, with no specific geographical restrictions indicated. The solicitation, issued on July 20, 2026, is linked to contract SPE4AX25D0003 and delivery order SPE4AX25F2656, and participation requires adherence to federal cybersecurity and supply chain integrity regulations without exception. Noncompliance may result in contract termination or penalties under applicable defense acquisition rules.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334220
New
SLED
Supply of 1x4 Optical SplitterThe contract entails the supply of an OTCP-1X4-00-SA 1x4 optical splitter designed for use in fiber optic networks operating at 1310 nm and 1550 nm wavelengths, enabling the distribution of optical signals across network paths. The component is critical for passive optical network infrastructure and must meet technical specifications to ensure signal integrity and performance in telecommunications applications. The solicitation is issued as a subcontract under NAICS code 334220, which classifies it within the optical communication equipment manufacturing sector, and is managed by the DFW International Airport through its Texas-based entity. The opportunity was posted on July 20, 2026, with a firm response deadline of July 23, 2026, at 7:00 PM, leaving a narrow five-day window for interested parties to submit proposals. The place of performance and point of contact details are unspecified in the available data. Interested suppliers must respond through the designated online portal at the provided UI link, and while no set-aside status is designated, the contract is structured as a subcontract, suggesting procurement is being managed under a broader prime contract or program. All technical and delivery requirements are expected to align with industry standards for optical splitters in telecom environments.
Dfw International Airport

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334220
New
SLED
Supply of Fiber Optic TX Module (15dBm Output)The contract outlines the supply of a fiber optic TX module specifically designated as LP-OT-15-B-SA, capable of outputting 15dBm power across a frequency range of 48 to 1000 MHz and equipped with SC/APC connectors, intended for use in MATV fiber networks to convert electrical signals into optical signals. This subcontract is issued by DFW International Airport under the NAICS code 334220, which corresponds to the manufacturing of electronic components and related products, and is open for response until July 23, 2026 at 7:00 PM. The requirement is for the delivery of modules that meet precise technical specifications to ensure seamless integration into existing infrastructure supporting audio, video, and data transmission over fiber. There is no set-aside designation specified, and the place of performance and point of contact details are not provided in the available information.
Dfw International Airport

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334220
New
SLED
Supply of Fiber Optic Receiver Module (DOCSIS 3.1 Compatible)The contract calls for the supply of an OTPN-412C Fiber RX module designed for DOCSIS 3.1-8 compatibility, featuring SC/APC connectors, operating across the 40-1220 MHz frequency range, and supporting dual wavelengths of 1310 nm and 1550 nm with a minimum output level of +28 dBmV. The module is intended for fiber-optic signal reception in cable television and broadband networks and includes the OTPS-12A-F power supply to ensure proper operation. This subcontract is issued by Dallas Fort Worth International Airport under the NAICS code 334220, which pertains to the manufacturing of communication equipment. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, at 7:00 PM, indicating a tight turnaround for potential suppliers. The place of performance and point of contact details are not specified, but the procurement is hosted on Bonfire Hub under opportunity ID 243668.
Dfw International Airport

POSTED

1 day ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 333914
New
DIBBS
SLEEVE, SHAFT, PUMPThe contract pertains to the procurement of one sleeve assembly for a pump shaft, specifically designated for use with the Worthington 2CNE72 centrifugal pump and identified by the part number 023054-30 under the NSN 4320002941591. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within five days from the origin point under FOB origin terms, with no tolerance for quantity variance. The product must be prepared for shipment in accordance with MIL-STD-2073-1E packaging standards, marked per MIL-STD-129, and packed at level B using code Q with no special marking. Inspection and acceptance occur at the origin, and the item must be palletized following DLA packaging requirements. The delivery destination is King Abdulaziz Naval Base in Jubail, Saudi Arabia, with freight handled by New York Forwarding Services Inc. The solicitation number is SPE7M0-26-T-014A, with a required delivery date of July 23, 2026, and the contract is managed under the Department of Defense’s Maritime Supply Chain ESOc Buys unit, with Grace Beck listed as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, ROTARYThe contract is for a single rotary switch with NSN 5930-01-619-0800, under purchase request 7017559756, requiring delivery within five days after award. The solicitation number is SPE7M0-26-T-015K, issued on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The item is to be delivered to FPO, ZIP 34094, and the contracting office is the Maritime Supply Chain ESOC Buys under the Department of Defense. Primary point of contact is Laurie Wassmuth, reachable via email or phone. The NAICS code is 335313, and the solicitation is classified as federal with no set-aside designation.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLICThe contract specifies the procurement of one nonmetallic hose with NSN 4720-01-471-4870 and part number 5E-9746, supplied by CATERPILLAR INC, under solicitation SPE7M0-26-T-015B. The item must be delivered within five days to Fort Leonard Wood, Missouri, under FOB origin terms, with no tolerance for quantity variance. All packaging must comply with ASTM D3951 and MIL-STD-129 for labeling and marking, with DLA Master List of Technical and Quality Requirements taking precedence over any other standard. The hose must be palletized according to DLA packaging requirements and shipped via traceable freight methods, excluding parcel post. The shipment is designated as RDD3 with no NMCS requirement, and the delivery address is the US Army Engineer School. The required delivery date is July 22, 2026, and the contract includes strict government-specific identifiers and logistics codes for tracking and accountability. The point of contact for inquiries is Abaigael Masterson, and the procurement is managed by the Department of Defense’s Maritime Supply Chain ESOc Buys.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335929
New
DIBBS
SIDE LEFT ELECThe contract pertains to the procurement of five units of SIDE LEFT ELEC with NSN 6145-01-556-7082, under solicitation number SPE7M0-26-T-016N, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, and the place of performance is designated as Texarkana, Texas, with a ZIP code of 75507-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment supersedes it. The offeror must provide a complete data package covering both the approved and alternate parts, as no specific data is currently available. The solicitation was posted on July 21, 2026, with bids due by August 3, 2026, and is categorized under NAICS code 335929. Primary point of contact is Abaigael Masterson, reachable via email and phone listed in the contract data.
Other Communication and Energy Wire Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETALThis contract specifies the procurement of a single nonmetallic hose assembly with part number 4720-01-084-0119, measuring 3/8 inch inner diameter and 28 inches in length, supplied under firm fixed price terms with zero variance allowed in quantity. The item must be delivered within five days after award of order and is subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, with mandatory labeling per MIL-STD-129 and palletization in accordance with RP001 DLA Packaging Requirements. The unit of issue is one each and the item is to be shipped by the fastest traceable means, explicitly excluding parcel post. The delivery address is Logistics Lane, Barksdale Air Force Base, Louisiana, with specific shipping identifiers including RDD 777, PROJ TP 1, and supplier code YAG328. The contract references approved suppliers and part numbers including Danfoss Power Solutions II, LLC and Atkinson Co., Inc., and the government reserves the right to remove identification from non-accepted supplies. All technical and quality specifications cited in the DLA Master List control over conflicting standards. The solicitation number is SPE7M0-26-Q-1084, with a response deadline of July 28, 2026, and a required delivery date of July 20, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335312
New
DIBBS
LINE REACTORSThis contract pertains to the procurement of one line reactor identified by NSN 6110-01-541-7029, with a requirement for delivery within five days of award. The solicitation number is SPE7M0-26-T-015J, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys organization, with performance required in Bremerton, Washington, 98314-5001. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which incorporates specific technical and quality controls identified by R or I numbers, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specified exemptions such as functional mercury in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must provide a complete data package covering both the approved part and any alternate part, as no data is currently available for this item. The response deadline is August 3, 2026, and primary point of contact is Rocio Mino at DLA.
Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
VACUUM PUMP UNIT, ROThe contract is for one vacuum pump unit, part number 93613 and NSN 4310016416459, to be delivered within five days of award under solicitation SPE7M0-26-T-015U. The unit must comply with all DLA packaging requirements outlined in RP001 and be packaged in accordance with MIL-STD-2073-1E using method 31 for preservation, with no cushioning material and a packaging code of U. Marking must follow MIL-STD-129 with no special marking required. The delivery is FOB origin, inspection and acceptance occur at the destination, and no quantity variance is permitted. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials must be approved unless explicitly permitted by specification. The delivery destination is the Carrier Outfitting Material Support Center in Suffolk, VA, and shipment must be sent by the fastest traceable method—parcel post is prohibited. The contract prohibits removal of government identification from non-accepted supplies and is governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The required delivery date is July 20, 2026, and the point of contact is Grace Beck of the Department of Defense.
Air and Gas Compressor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
TEST SET SUBASSEMBLThis contract pertains to the procurement of two units of a test set subassembly identified by NSN 4921-01-029-3054 and part number CA70251, under solicitation SPE7M0-26-T-014D. The delivery must occur within five days of order placement, with FOB origin terms and no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 specifications, utilizing approved methods and materials while avoiding plastics where possible, as required by DLA packaging standards. The item is to be delivered to a military facility in Derince, İzmit, Turkey, with freight handled by PTK00A at NUWC Newport, and must be palletized and marked in accordance with all referenced defense standards. The contract prohibits the use of Class I ozone-depleting chemicals and mandates adherence to all technical and quality requirements listed in the DLA Master List, which controls based on the solicitation issue date. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the supplier must ensure compliance with the DLA procurement framework including oversight of government identification removal on non-accepted supplies. The solicitation is issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office, with a response deadline of August 3, 2026, and an original required delivery date of July 23, 2026. The item is classified under NAICS code 333310 and is subject to federal procurement rules. Special marking is not required, and the unit of issue is each. The point of contact is Audrey Acuna, and the full technical and quality specifications are incorporated by reference through DLA’s official master list. All deliveries are to be coordinated to the specified Turkish military address and governed by the DoD’s authorized unit of issue guidelines. The contract does not permit substitutions without prior approval, particularly for chemicals or packaging materials, and remains binding under all applicable defense acquisition regulations.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TRIGGERThe contract pertains to the procurement of one SWITCH, TRIGGER with NSN 5930-01-177-5707 under solicitation SPE7M0-26-T-014P, with a required delivery within five days of award. The procurement is governed by DLA packaging requirements and includes the application of Covered Defense Information under RD002, alongside mandatory compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 through a self-assessment. All technical and quality requirements referenced in this solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The government mandates the removal of any government identification from non-accepted supplies. The solicitation was posted on July 21, 2026, with responses due by August 3, 2026, and is classified under NAICS code 335313 for electrical equipment manufacturing. The contracting activity is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense, with performance required in Lexington, Kentucky, 40516-9723. Primary point of contact is Laurie Wassmuth, reachable via email and phone provided.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
CABLE, POWER, ELECTRICALThe contract specifies the procurement of 800-foot reels of electrical power cable under NSN 6145012020676, with a total quantity of 360 feet divided across three line items, each priced at $120 per foot. The cable must comply with Military Specification MIL-DTL-24643/16G and MIL-DTL-24643D, and is designated as a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The product must be supplied in continuous length, as dictated by Advice Code 2N, and multiple unit packs are not acceptable. Mercury or mercury-containing compounds are strictly prohibited in or in direct contact with the cable except for specific functional exceptions like batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. Packaging and preservation must follow MIL-STD-2073-1E and MIL-DTL-12000, with marking conforming to MIL-STD-129, and the items must be delivered FOB origin within five days of order. The delivery destination is the U.S. Naval Base in Sasebo, Japan, with inspection and acceptance occurring at the point of delivery. The contract is subject to a 10% positive quantity variance with zero tolerance for under-delivery and falls under a Total Small Business Set-Aside classification. All supplies must be sourced from qualified manufacturers listed on the Qualified Products List or Qualified Manufacturers List, and deviation requests must be formally submitted. The required delivery date is July 17, 2026.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, AUDIO FThe contract specifies the procurement of a single audio frequency transformer with NSN 5950-00-827-7181 and part number 1279642-1, sourced from approved suppliers including Honeywell International Inc. Coast/Advanced Chip Magnetics Inc. and Precision Electronics Inc. Delivery is required within five days of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding standard ASTM D3951. Non-hazardous items must be commercially packaged per DLA guidelines, while hazardous materials require alignment with FED-STD-313 and TQ requirement IP025. All packaging and labeling must conform to MIL-STD-129, with palletization following RP001 specifications. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated Tinker AFB receiving facility, with a required delivery deadline of July 21, 2026. The contract is issued under solicitation SPE7M0-26-T-014Q, with point of contact Audrey Acuna, and falls under NAICS code 334416 for electronic component manufacturing, managed by the Department of Defense’s Maritime Supply Chain ESOC.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details