Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SHAFT ASSEMBLY, FUEL

Active
SPE4A5-26-T-283QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 50 units of the SHAFT ASSEMBLY, FUEL with NSN 2840010141882 and part number 3240348, manufactured by HONEYWELL INTERNATIONAL INC. Delivery is required within 200 days from the award date, with FOB origin terms and inspection and acceptance occurring at the destination. The items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including MIL-STD-129 marking with no special markings. Sampling for quality verification follows MIL-STD-1916 or equivalent zero-based plans, with critical attributes requiring a zero non-conformance acceptance level unless otherwise stated. The product is designated as a Critical Application Item and requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Configuration changes must follow Engineering Change Proposal procedures, and government identification must be removed from non-accepted supplies. All shipments must be palletized per DLA guidelines and addressed to DLA Distribution Cherry Point in North Carolina. The contract is part of a federal solicitation issued under SPE4A5-26-T-283Q, with a response deadline in July 2026 and a required delivery date of December 28, 2026.

General Info

Procurement of 50 shaft assemblies for fuel systems under NSN 2840-01-014-1882 via DIBBS, due July 17, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-283Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Anthony Duguay
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHAFT ASSEMBLY,FUEL
SHAFT ASSEMBLY, FUEL CONTROL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC 06848 P/N 3240348
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-283Q
SECTION B
PR: 7014213149 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014213149 0001 EA 50.000
NSN/MATERIAL:2840010141882
DELIVERY (IN DAYS):0200
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:04/17/2026 Original Required Delivery Date:12/28/2026
SPE4A5-26-T-283Q NSN/Part Number: 2840-01-014-1882 Quantity: 50 EA Purchase Request: 7014213149QTY: 50 Delivery: 200 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
Aircraft Pneumatic Tire Supply
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 336412
New
DIBBS
Supply of Inflatable Inflation Assembly (P/N: 4220-00-920-3651)The contract calls for the supply of 110 units of a military-grade Inflatable Inflation Assembly with part number 4220-00-920-3651, requiring full compliance with the MIL-I-87108B specification. Performance must include successful completion of First Article Testing to validate conformance to technical requirements, and all units must be packaged and marked in strict accordance with military standards for identification, handling, and traceability. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, ensuring eligibility is restricted to small businesses as defined by the SBA, with the NAICS code 336412 categorizing it under Aircraft and Parts Manufacturing. The offering is managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I office, with a response deadline of July 24, 2026, and an posted date of July 17, 2026, indicating a seven-day window for submissions. All work must be performed in accordance with federal procurement guidelines, and the procurement is administered through the DIBBS platform.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
Federal
SPRRA126Q0025 // STARTER DRIVE, ASSEM // NSN 2840-01-461-9195This solicitation is a sole-source procurement issued to Honeywell Intl, Inc. for the acquisition of seven units of the Starter Drive, Assembly, Part Number 2-160-010-21, with National Stock Number 2840-01-461-9195. The procurement is managed under solicitation number AX6T6055AX and was posted on July 17, 2026, with a response deadline of August 18, 2026, at 7:30 PM Eastern Time. The contract falls under NAICS code 336412, which classifies it within the Aircraft Engine and Engine Parts Manufacturing sector. The issuing agency is the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, operating under the Department of Defense, with Richard Bulson designated as the primary point of contact for inquiries. The place of performance is listed as an unnamed location in Arizona, and the solicitation is accessible through the SAM.gov portal for further details.
Al DLA Aviation At Huntsville

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
28--ACCESSORY GEARBOXThe contract pertains to the procurement of an Accessory Gearbox under solicitation SPRPA126RYC27, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia. It mandates strict compliance with a range of federal contracting clauses including mandatory use of the Workflow Pro Mod Assist module, requiring vendors to register through the NAVSUP WSS portal and designate Robyn Grinarml as the point of contact for system support. All post-award requests must be submitted exclusively via the NAVSUP WSS Vendor Portal, with specific instructions detailed in clause WSSTERMHZ17. The item is designated as a Critical Safety Item, necessitating heightened scrutiny and adherence to quality standards, including ISO 9001 or higher. The contract enforces Buy American provisions, requires submission of proposals via email, and includes provisions for certified cost or pricing data, limitation of liability for high-value items, and security prohibitions as outlined in recent 2026 deviations. The contractor must also comply with small business subcontracting and equal opportunity requirements, and adhere to transportation regulations for sea shipment. A priority rating for national defense use is applicable, and the solicitation permits only one offer. The response deadline is July 28, 2026, and the NAICS code indicates manufacturing within the aerospace engine and engine parts sector.
Pa DLA Aviation At Philadelphia

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
DUCT, AUGMENTOR, AIRC_End_Item_F110_NSN_2840015276870PR_PN_1452M70G10The U.S. Air Force, through the 421st SCMS Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a duct augmentor component for the F110 engine platform, identified by part number 1452M70G10 and NSN 2840-01-527-6870PR. This effort is issued as a Sources Sought Synopsis under FAR Part 10 and is not a solicitation or request for proposal; no contract will be awarded based on responses, and no funds are currently available. The government is evaluating potential vendors—including large businesses, small businesses, disadvantaged businesses, service-disabled veteran-owned small businesses, HUBZone firms, and women-owned small businesses—to determine if the requirement can be competitively sourced or set aside for small business participation. Respondents must demonstrate the capability to handle full manufacturing processes including component procurement, inspection, testing, preservation, packaging, logistics, and supply chain management, and may be responsible for nonrecurring engineering costs to qualify as an approved source. The response deadline is July 25, 2026, and interested parties must select the “Add Me to Interested Vendors” button to participate. All communications and submissions must be directed to 421scms.requirements.workflow@us.af.mil.
Ok DLA Aviation At Oklahoma City

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
DUCT, EXHAUST, AIRCRA_End_Item_F110_NSN_2840014622338PR_PN_1602M64G08
Ok DLA Aviation At Oklahoma City

POSTED

about 20 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336412
New
Federal
NSN3110-01-253-3236OK_RollerBearing_J85_PNR1916E112_FD2030-26-00820The contract pertains to the procurement of roller bearings designated by NSN 3110012533236, with part numbers R1916E112 and 5014T13P06, described as steel composite components designed to reduce friction. A total of 117 units are required, to be delivered in five installments to Tinker AFB, Oklahoma, with each delivery scheduled on or before the last day of the month from December 2026 through April 2027, amounting to 25 units per month for the first four shipments and 17 units in the final delivery. The contract period ends on August 30, 2026, with all deliveries scheduled to be completed by April 2027. The solicitation is conducted electronically under FAR 5.207(c)(16)(ii), allowing all responsible sources to submit proposals, and is classified as a presolicitation with a response deadline of August 17, 2026. This item was previously acquired under contract SPRTA126C0045, and the procurement is managed by the Department of Defense through the DLA Aviation office at Tinker AFB, with primary point of contact available via email for inquiries.
Ok DLA Aviation At Oklahoma City

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
FD2030-27-00101The contract pertains to the procurement of a turbine frame for aircraft applications, identified by NSN 2840-01-200-5345PR and tied to drawing number 9343M79G02 with revision 18 dated January 21, 2025. The item is classified under MDC code AAM and is managed by Rebecca L. Roach. The contract, designated FD2030-27-00101, was posted on July 17, 2026, with a response deadline of January 17, 2027, and falls under NAICS code 336412, indicating its alignment with aircraft engine and engine parts manufacturing. It is issued by the Department of Defense through DLA Aviation Oklahoma City under a special notice type, with no set-aside designation, and the performance location is unspecified. All inquiries and submissions must be routed through the official SAM.gov portal linked to the solicitation.
DLA Aviation Oklahoma City

POSTED

about 20 hours ago

DEADLINE

in 6 months
View Details
NAICS: 336412
New
Federal
SHAFT, TURBINE, AIRC_End_Item_F110_NSN_2840013113811PR_PN_1499M83P02The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of a turbine shaft, part number 1499M83P02 with NSN 2840-01-311-3811PR, intended for F110 platform applications. This solicitation is a Sources Sought synopsis under FAR Part 10, not a formal request for proposal, and no contract award is anticipated from this effort. The government is seeking input from potential suppliers—including large businesses, small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses—to assess market capability, determine if the requirement can be competitively sourced, and evaluate potential for a small business set-aside. Responses must be submitted via the designated vendor interest button by the deadline, and no funding is available for information gathered during this phase. Potential vendors must demonstrate the capacity to manufacture the item from raw materials or components, including all associated processes such as inspection, testing, preservation, packaging, and shipping. Responsibilities may also extend to supply chain management, logistics planning, production forecasting, mitigation of diminishing manufacturing sources and material shortages, and handling nonrecurring engineering costs to qualify as an approved source. The designated place of performance is Tinker AFB, Oklahoma, and all correspondence must be sent to the provided workflow email. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the requirement falls under the Department of Defense’s Air Force Sustainment Center. No solicitation exists at this time, and inquiries for one will not be answered; this effort is strictly for market analysis to inform future acquisition strategy.
Ok DLA Aviation At Oklahoma City

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
F-100 Seal, Metallic, AircrThe U.S. Department of Defense, through the Ok DLA Aviation office at Tinker Air Force Base, Oklahoma, is issuing a presolicitation for the procurement of the F-100 Seal, Metallic, Aircr, identified by NSN 2840-01-436-9105NZ and part number 4082667-01, under solicitation number SPRTA1-26-R-1102. This acquisition falls under NAICS code 336412 and is not subject to any set-aside provisions, making it open to all responsible sources. The requirement is for 301 units to be delivered on or before February 9, 2028, with a potential option range extending from a minimum of 76 units to a maximum of 455 units. The item is classified as a Critical Safety Item, requiring first article testing and formal qualification of the proposed product, and is subject to export control regulations. The Government will not provide specifications, plans, or drawings for the item, placing full responsibility on the offeror to meet the required performance standards based on the item’s known designation and usage context. The solicitation will be issued electronically via www.fbo.gov with an estimated release date of June 26, 2026, and proposals are due no later than July 28, 2026. The award decision will be based on a combination of price, technical approach, and past performance, though specific evaluation criteria and weighting have not yet been determined. All offers must comply with applicable Federal Acquisition Regulation provisions, and the contract is contingent upon the availability of appropriated funds. Submission of capability statements, proposals, or quotations is encouraged under FAR 5.207(c)(16)(ii), and the Government has appointed an ombudsman to address concerns during the pre-solicitation phase. Questions should be directed to the contracting officer, Jeremy Bryant, at 405-855-7112 or Jeremy.bryant@us.af.mil. The place of performance and inspection details remain unspecified, but deliveries must be made to location SW3211, and surplus materials are not authorized for use in fulfillment of this requirement.
Ok DLA Aviation At Oklahoma City

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
Cutback shroud replacements, T64 SIO Contract SPE4AX19D9400
DLA Aviation

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
Precision Aerospace Component Manufacturing – Pylon Section, AirCRThe contract involves the manufacture or supply of a fully compliant Pylon Section, AirCR, identified by NSN 1560016746405, a vital structural component used in military aircraft systems. This subcontract requires strict adherence to military technical specifications and quality standards to ensure operational reliability and safety in defense applications. The component must be produced to exact engineering requirements and undergo rigorous validation to meet the stringent performance criteria established by the Department of Defense. Performance of the work is designated for Jacksonville, Florida, with the deliverable expected to fully integrate into existing aircraft platforms without modification or deviation. The solicitation is posted under the NAICS code 336412, indicating a focus on aircraft manufacturing and assembly, and is managed by the ASC SUPPLIER OPER OEM DIVISION. Bidders must submit responses by July 24, 2026, with the posting date established on July 16, 2026, providing a narrow eight-day window for proposal preparation. While no set-aside provisions or organizational type designations are specified, the contract is structured as a subcontract under a larger DoD procurement framework, suggesting that potential suppliers must already hold relevant certifications and prior experience in defense aerospace component production. All interested parties must access the full solicitation through the DIBBS portal using the provided link to ensure compliance with submission protocols and technical documentation requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332311
New
DIBBS
Supply of Shipping and Storage Container Covers (NSN 8140-01-593-3819)The contract is for the firm fixed-price supply of 143 military-specification metal container covers identified by NSN 8140-01-593-3819, requiring full compliance with MIL-SPEC standards for design, materials, and performance. Delivery is F.O.B. Origin, meaning the contractor assumes all shipping risks and costs until the items are loaded for transport. The item falls under NAICS code 332311, indicating fabrication of metal tank and container manufacturing. The solicitation was posted on July 17, 2026, with responses due by July 26, 2026, and is classified as a subcontract under the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Performance location and point of contact details are not specified, but the contract is accessible through the DLA Dibbs portal for qualified suppliers.
Prefabricated Metal Building and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
SHROUD, CONTAININGThis contract pertains to the procurement of a shroud containing item identified by NSN 2835-01-148-5503 and part number 160656-100, supplied by RTX CORPORATION, categorized as a commercial off-the-shelf (COTS) item. Two units are required to be delivered FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance will occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, adhering to DLA’s packaging standards, with no special marking required. Item Unique Identification is waived per the service customer’s request, though other quality and technical requirements referenced by R numbers are incorporated by reference from the DLA Master List. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances mandated unless otherwise specified, and attributes are assigned verification levels or AQLs as outlined. The item is designated a critical application item, and the contractor must complete a CMMC Level 2 self-assessment to meet cybersecurity requirements. Measuring and test equipment used must meet RT001 standards, and all documentation for source approval, government identification removal, and physical item marking must be fulfilled as per specified clauses. Delivery is directed to DLA Distribution Depot Hill in Utah, with transportation governed by DLAD procedural notes. The solicitation, issued under contract number SPE4A5-26-T-8333, is a total small business set-aside under NAICS code 333611, with a response deadline of July 22, 2026, and a need ship date of August 18, 2026.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, SIGHT, LIQThe contract is for one indicator, sight, liquid with NSN 6680-01-413-8344, to be delivered in a single unit within 20 days to the destination FPO AE 09554 aboard USS BATAAN LHD 5. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, unit and intermediate containers, and packaging code U, with no special marking required. Palletization follows DLA packaging requirements, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, and marking, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shock-proof with secondary containment. Sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attribute classifications follow designated verification levels or AQLs. Item Unique Identification is not required per the service customer’s request, and the item has no shelf life. The contract references technical and quality requirements from the DLA Master List, effective as of the solicitation issue date. The vendor must use the designated freight shipping address and avoid parcel post, shipping via the fastest traceable means. The required delivery date is May 26, 2026, with a response deadline of July 17, 2026, under solicitation SPE4A5-26-T-283G, issued by the Department of Defense’s ASC Supplier OEM Division.
Other Measuring and Controlling Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 331210
New
DIBBS
TUBE, FUEL DRAINThis contract specifies the procurement of a fuel drain tube, identified by part number L21609G01 and NSN 4710-00-613-7270, with a quantity of three units to be delivered FOB origin within 169 days, with no acceptable variance in quantity. The item is classified as a commercial item and designated as a critical application item, subject to strict compliance with military and defense standards including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for specific functional uses approved by NAVSEA, with portable mercury-containing devices requiring dual containment and shockproof design. All packaging and palletization must conform to DLA Packaging Requirements and IP056 restrictions, and the delivery destination is specified as the DLA Distribution San Joaquin warehouse in Tracy, California. The contract was issued under solicitation SPE4A5-26-T-282T with a response deadline in July 2026, and the required delivery date is October 5, 2027, with a need ship date of January 3, 2027. The purchase request number is 7017409179, and primary point of contact is Donetta Nelson of the Department of Defense.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, THRUSTThe contract involves the purchase of 31 thrust pins with NSN 5315-00-009-5753 under solicitation number SPE4A5-26-T-213H, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on June 4, 2026, with a response deadline of June 12, 2026, and is classified under NAICS code 332721, indicating it pertains to the manufacturing of machine shops and turned products. The procurement is a federal opportunity with no set-aside designation, open to all eligible respondents, and performance is expected to occur within the United States. All inquiries and submissions must be made through the DIBBS portal using the provided UI link, and no specific point of contact or physical delivery address is listed in the contract data.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
BELL CRANKThe contract solicitation is for a Bell Crank part identified by NSN 1680-01-155-6036, with a requested quantity of three units. The solicitation number is SPE4A5-26-T-269P, issued by the Defense Logistics Agency under the Department of Defense, and was posted on June 30, 2026. Responses are due by July 8, 2026, and the procurement is structured as a federal solicitation with no specific set-aside designation. The place of performance and office address details are not specified beyond the United States, and no point of contact information is provided within the available data. The solicitation can be accessed via the DIBBS platform using the provided UI link.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334519
New
DIBBS
GAGE, ABSOLUTE PRESSThe contract pertains to the procurement of two absolute pressure gauges under NSN 6685-01-390-1677 and manufacturer part numbers F4H3D7F100000 and 4083-650051-003, sourced from Bristol Babcock Inc Helicoid Instruments Division and Hughes Missile Systems Co. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, including a special delicate instrument code 05. Each unit must carry a temporary tag identifying the contract number, NSN, manufacturer part number, and rated accuracy without interfering with its use. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. Packaging and palletization adhere to DLA’s RP001 requirements, and no parcel post is permitted—shipping must occur via traceable means to Barksdale Air Force Base, Louisiana. The solicitation number is SPE4A5-26-T-283Z, with a response deadline of July 22, 2026, and the contract incorporates technical and quality standards referenced in the DLA Master List, with revisions controlled by the solicitation issue date.
Other Measuring and Controlling Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
STUD, STEPPEDThe contract pertains to the procurement of five stepped studs identified by NSN 5307-01-326-9582 under solicitation SPE4A5-26-T-283M, with a delivery requirement of five days ADO. The item must comply with MIL-STD-130N for identification marking of U.S. military property, though item unique identification is explicitly not required as per the service customer's request, and DFARS 252.211-7003(c)(1)(i) governs this exemption. The material has no shelf life restriction. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II, or with AQLs of 0.1, 1.0, and 4.0 respectively, while unspecified attributes default to major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but requires zero non-conformances unless otherwise stated. Measuring and test equipment must meet RT001 standards, and DLA packaging requirements apply. Covered defense information may be involved per RD003, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies per RQ011. The solicitation was posted on July 17, 2026, with a response deadline of July 22, 2026, and is managed by the DLA Supplier Operations OEM Division, with Caroline Simpson as the point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
HOOK, CARGOThe contract pertains to the procurement of HOOK, CARGO with NSN/Part Number 4030-01-508-1207, under Purchase Request 7017385011 for a quantity of three units. The solicitation is issued by the Defense Logistics Agency under the Department of Defense with solicitation number SPE4A5-26-T-271X, posted on July 5, 2026, and responses are due by July 13, 2026. The procurement is categorized as a federal solicitation with no set-aside designation applied, indicating it is open to all eligible contractors. The place of performance and office address details are unspecified, though the country code is listed as the United States. All communications and submissions must be made through the official DIBBS platform via the provided UI link, and no point of contact information is included within the solicitation data.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
WASHER, RECESSEDThe contract specifies the procurement of 116 units of a recessed washer with NSN 5310-01-447-6251 and part number 140-007-41S34-2 supplied by Bell Textron Inc under solicitation SPE4A5-26-T-283W. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions in effect on the solicitation issue date controlling for simplified acquisitions. Item Unique Identification is not required, as confirmed by the service customer’s request and referenced DFARS clause. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization adherence to DLA’s RP001 packaging standards, while DLA’s master requirements take precedence over ASTM. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Inspection and acceptance occur at the destination point, with no variance allowed in quantity. The unit of issue is each (EA), with delivery scheduled within 169 days FOB origin, to the DLA Distribution facility in New Cumberland, PA, with a required ship date of January 3, 2027, and original delivery deadline of March 17, 2027. The material has no shelf life, and government identification must be removed from non-accepted supplies per RQ011. Measuring and test equipment must meet RT001 standards, and all packaging must be marked per applicable defense logistics directives.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334511
New
DIBBS
REPAIR KIT, NAVIGATIThis contract specifies the procurement of a repair kit for navigational instruments with the NSN 6605-01-597-8773 and a quantity of 66 units, to be delivered within 110 days under contract SPE4A5-26-T-283P. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, Appendix D, for kits, requiring all components to be packed in a single box with cushioning to prevent movement and damage, accompanied by a detailed contents list. Marking and barcoding must follow MIL-STD-129, with no special marking required, and palletization adheres to DLA packaging standards. The repair kit is designated as a critical application item and must be identified with specific part numbers from CPI SATCOM & ANTENNA TECHNOLOGIES INC and ROCKWELL COLLINS, INC. Sampling for quality verification must align with MIL-STD-1916 or ASQ H1331 using zero non-conformances unless otherwise stated, with unspecified attributes treated as major. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions determined by procurement type and amendment dates. Item Unique Identification is not required per customer request. Hazardous materials shipping follows parcel post guidelines to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation rules reference DLAD procedural notes C19 and C20. The required delivery date is July 18, 2026, with a need ship date of May 12, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
ADAPTER, CONNECTORThe contract solicitates 30 units of an adapter and connector with NSN 5935-01-524-0999 under purchase request 7017227377. The solicitation, identified by number SPE4A5-26-T-251K, was posted on June 17, 2026, and responses are due by June 25, 2026. It is issued by the Defense Logistics Agency under the Department of Defense and falls under the NAICS code 334417, which corresponds to the manufacturing of other electronic components. The procurement is classified as a federal action with no specified set aside for small businesses or other categories. The place of performance and physical office address details are not provided, but the solicitation is accessible via the DIBBS system for bidder information and submission.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details