Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHAFT, DRIVE, FLEXIBL

Active
SPE7LX-26-U-9292Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 135 flexible drive shafts identified by NSN 3040-01-457-0460 under solicitation SPE7LX-26-U-9292, with a required delivery within 98 days of award. The specification strictly limits acceptable products to those precisely described on the referenced drawing, and no alternative offers will be evaluated or approved by DLA Land & Maritime. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The contract is administered by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek designated as the primary point of contact. The NAICS code 333613 classifies this as a manufacturing procurement, and the solicitation is open to federal contractors with a response deadline of August 20, 2026. Government identification must be removed from any non-accepted supplies, and potential suppliers seeking future qualification must engage directly with the cognizant design activity as outlined in FAR Clause 52.209-1.

General Info

Procure 135 flexible drive shafts per drawing, delivery in 98 days, no alternatives allowed, DLA contract, deadline August 20, 2026.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7LX-26-U-9292.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHAFT,DRIVE,FLEXIBL
SHAFT, DRIVE, FLEXIBLE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ONLY THE ITEMS DESCRIBED ON THE SC DRAWING ARE
APPROVED FOR USE IN THE APPLICATIONS SPECIFIED
HEREON. DLA LAND & MARITIME WILL NOT EVALUATE
AND/OR APPROVE ALTERNATE OFFERS.
OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR
PRODUCT FOR FUTURE ACQUISITIONS MUST CONTACT THE
COGNIZANT DESIGN ACTIVITY SPECIFIED IN FAR CLAUSE
52.209-1, QUALIFICATION REQUIREMENTS ( NSN/Part Number: 3040-01-457-0460 Quantity: 135 EA Purchase Request: 1000239155QTY: 135 Delivery: 98 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L1-26-T-916T
The contract specifies the procurement of a SHAFT, SHOULDERED with NSN 3040011111784 and part number 167C2304-3, procured under solicitation SPE7L1-26-T-916T by the Department of Defense through the Land Supply Chain. Four units are required to be delivered within 20 days FOB origin to Holloman Air Force Base, New Mexico, with no tolerance for quantity variance. The item is classified as a critical application item and is subject to stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 marking and labeling, palletization standards per RP001, and all shipments must use the fastest traceable means—parcel post is prohibited. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The contract mandates delivery by August 3, 2026, with no specified need ship date, and the point of contact is Kristina Derry via email and phone. The NAICS code is 333613, and the contract was posted on August 5, 2026, with responses due by August 17, 2026.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7LX-26-U-9323
This contract is for the procurement of 249 hydraulic cylinder assemblies identified by NSN 3040-01-454-3533 and part number A23280Q9819, manufactured by Meritor Industrial Products, LLC, for use on Model 1000M fork lift trucks. The requirement is issued under solicitation SPE7LX-26-U-9323 as a total small business set-aside under NAICS code 333613 and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is due within 184 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The unit of issue is each, with a unit price of $249.00, resulting in a total price of $61,901.00, though the quantity is estimated and not guaranteed to be purchased by the IDC. All items must be packaged and labeled in strict accordance with DLA Packaging Requirements for Procurement (RP001) and MIL-STD-129, with palletization meeting RP001 standards. While ASTM D3951 provides general packaging guidelines, all DLA Master List of Technical and Quality Requirements supersede them and must be fully complied with. The contract references technical and quality specifications identified by R or I numbers from the DLA Master List, accessible via the official DLA website, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. The point of contact for inquiries is Theodore Misiolek, and the solicitation response deadline is August 20, 2026, with a posted date of August 5, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
BALL JOINT
Solicitation # SPE7LX-26-U-9301
This contract pertains to the procurement of ball joints designated as critical application items, with specific part numbers from ZF Friedrichshafen AG and THK Rhythm Automotive Michigan Corp, and is identified by NSN 3040218786687. The quantity is 247 units, to be delivered FOB origin within 139 days, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking or additional cushioning required. The use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements, and any substitute chemicals must be pre-approved unless explicitly authorized by the original specifications. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each (EA), and all deliveries must conform to DLA’s authorized packaging and palletization standards. The contract is issued under solicitation SPE7LX-26-U-9301 with a response deadline of August 20, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate through the designated point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, DRIVE, FLEXIBL
Solicitation # SPE7LX-26-U-9286
The contract pertains to the procurement of 79 flexible drive shafts with NSN 3040-01-457-0461 under solicitation SPE7LX-26-U-9286, with a delivery requirement of 144 days after order. The item is subject to strict source control as the approved supplier has been changed to SS White Technologies Inc. at a new address in Saint Petersburg, FL, with Cage Code 0KZS2, and procurement must follow the sole-source process as outlined in the AMSTA 525 form. The contract incorporates mandatory technical and quality requirements from the DLA Master List, and compliance is governed by the revision in effect on the solicitation issue date. The item is classified as containing controlled technical data subject to ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, and only contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal authorization may access this information. The product must not contain any Class I ozone-depleting chemicals, and any alternative chemicals require prior approval unless explicitly permitted by the specifications. Components must be sourced from qualified manufacturers listed on approved QPLs or QMLs, and configuration changes require formal engineering change proposals. Inspection and acceptance may occur at the manufacturer’s origin, and all delivered items must comply with DLA packaging standards. Government identification must be removed from non-accepted supplies, and higher-level contract quality requirements apply to both manufacturers and non-manufacturers. The Defense Logistics Agency enforces cybersecurity compliance through CMMC Level 2 certification for third-party assessors and requires adherence to Covered Defense Information protocols. The solicitation closed on August 20, 2026, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
GEAR, INTERNAL
Solicitation # SPE7L4-26-T-5992
The contract specifies the procurement of one unit of an internal gear with NSN 3020-01-448-2911 under solicitation SPE7L4-26-T-5992, requiring delivery within 20 days to the destination FPO AP 96683 aboard the USS WAYNE E MEYER DDG 108. All supplies must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking applicable. Packaging must use preservative method 33, drying agent 49, gauze wrapping, and standard unit container D3, with intermediate containment code E5 and packing code U. Mercury and mercury-containing compounds are strictly prohibited from contact with the hardware except in approved exceptions such as functional batteries, lamps, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable devices requiring shock-proof design and secondary containment as per NAVSEA 5100-003D. The contract enforces zero variance in quantity, FOB destination delivery terms, and adherence to DLA transportation procedures C19 and C20 for vessel shipments. The item is sourced under DoD authorized unit of issue, with inspection and acceptance occurring at destination. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and the NAICS code is 333613 under the Department of Defense’s LSO Combat Vehicles and Armament office.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
Federal
30--SUPPORT,CYLINDER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLA56
This solicitation, identified as N0038326QLA56, seeks repair and modification services for a critical flight-critical aircraft launch and recovery component classified as a Critical Safety Item (CSI) requiring engineering source approval from the Naval Air Systems Command. Only pre-approved sources—DRAFTCO INCORPORATED and THE ENTWISTLE COMPANY—are eligible for award, and any new offeror must submit a comprehensive source approval package meeting stringent documentation requirements including configuration drawings, process sheets, production records, and detailed comparative analyses to demonstrate equivalency with approved parts. The item, identified by drawing number 3491AS0504, is used in a system vital to shipboard aircraft operations, where failure could result in catastrophic consequences including loss of life or aircraft, necessitating strict adherence to MIL-STD-130 marking, NAWCADLKE engineering controls, and full compliance with specified repair procedures that must be submitted for prior Navy engineering approval before any work begins. All proposals must include a firm fixed unit price per CLIN with no tiered pricing, submitted by the July 30, 2026 deadline, and remain valid for at least 120 days. Offers will be evaluated primarily on non-price factors—capacity, delivery, and past performance—with price being secondary. Mandatory inspections include 100% inspection of critical characteristics, full 100% inspection of plating, hardness, and non-destructive testing (NDT), and NDT must be performed by NADCAP or ISO 17025-accredited labs. Contractors must facilitate on-site inspections by NAWCADLKE and DCMA representatives, providing all necessary equipment, facilities, and manpower for interim and final inspections, with 14 days' notice required before any inspection. Full quality records must be maintained for seven years and submitted to the Navy’s cognizant technical authority. The contract mandates compliance with Buy American provisions, warranty coverage of 365 days post-delivery with 45 days to report defects, and strict control over manufacturing aids, which the contractor must supply. Failure to meet any source approval, inspection, documentation, or certification requirement will result in disqualification.
Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333613
New
Federal
SHAFT,SHOULDERED
Solicitation # N0010426QFA75
This contract solicitation (N00104-26-Q-FA75) issued by the Department of Defense through Navsup Weapon Systems Support targets the supply of a shoulder shaft component critical for naval shipboard systems. The material and workmanship involved are designated as Special Emphasis Material (Level I, Scope of Certification, or Quality Assured) due to their application in life-critical ship systems where failure could result in severe damage or loss of life. Consequently, the contract imposes stringent quality assurance, traceability, and certification requirements applicable from raw material sourcing and manufacturing processes through final delivery. Compliance with applicable military, federal, and commercial specifications and standards is mandatory, including reference to specific Navy drawings, welding and brazing procedures, thread inspection protocols, and traceability markings per MIL-STD-792 and associated Navy specifications. Certifications must accompany all material and fabrication processes, requiring submission through authorized electronic means (WAWF), with no shipment allowed prior to government acceptance. Inspection and acceptance will be performed by authorized government representatives either at the contractor’s facility or at the specified destination (Portsmouth Naval Shipyard, Kittery, ME), with detailed guidance on lot inspection, material verification, and non-destructive testing compliance provided in the contract. The contractor must maintain documented quality systems aligned with ISO 9001 and related calibration standards, along with robust supplier control and subcontractor evaluation programs. Packaging and marking requirements comply with MIL-STD-2073 and MIL-STD-129 to ensure safe transport, effective identification including Unique Item Identification (UII), and adherence to hazardous material regulations where applicable. Special contract clauses include provisions for small business set-asides, warranty of supplies, and adherence to Federal Acquisition Regulation (FAR) and Defense FAR Supplement (DFARS) requirements, including cybersecurity mandates for safeguarding controlled defense information. Award evaluation will emphasize past performance and price, with the government reserving the right to make a best-value determination based on these factors. The overall contract performance period is 365 days after receipt of order, with FOB destination delivery terms.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
Federal
SHAFT,SHOULDERED
Solicitation # N0010426QFG53
This contract pertains to the procurement of a specially engineered shouldered shaft intended for critical use in a shipboard system, where failure could result in catastrophic consequences including loss of life or vessel. The material, ASTM-B196 Alloy C17200 rod heat-treated to specific properties per NAVSEA drawing 6408191, must meet stringent quality and traceability standards as classified under SPECIAL EMPHASIS Level I, requiring full compliance with military and industry specifications including MIL-STD-792, ASTM-B249, ISO-9001, and ISO/IEC 17025. Every component must be traceable from raw material through final inspection via unique heat-lot markings, with certifications for chemical and mechanical properties required for each lot, electronically signed and fully documented without disclaimers. All welding and brazing operations must adhere to approved procedures under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with qualification data, welder certifications, and consumable metal certificates submitted and approved prior to production. Threaded surfaces must be inspected using FED-STD-H28 System 21 unless otherwise specified, and O-ring grooves and sealing surfaces must conform to General Acceptance Criteria unless explicitly prohibited. The contractor must maintain a qualified quality system compliant with ISO-9001 or MIL-I-45208, subject to government audit and source inspection by DCMA at all production and subcontractor locations. Material received from suppliers must undergo rigorous receiving inspection including verification of traceability markings against certification reports, and all nonconforming items must be flagged and reported. Final acceptance requires 100% inspection of traceability, certifications, and non-destructive test records, with zero defect tolerance in sampling per ANSI/ASQ Z1.4. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard, with shipment strictly prohibited until acceptance is confirmed. The contract prohibits mercury-containing materials, mandates configuration control and engineering change proposals for any impact on form, fit, or function, and requires full compliance with Navy-specific regulatory and security directives including DPAS priority ratings and restricted document handling. Electronic signatures are accepted as legally binding, provided they are unique to the individual and prevent unauthorized document alteration. All subcontractors must be vetted and their processes aligned with prime contractor obligations, with documentation submitted through ECDS and WAWF systems
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333613
New
Federal
30--CYLINDER ASSEMBLY,A
Solicitation # N0010426QYAE0
The contract pertains to a single unit of a 30-cylinder assembly, identified by NSN 3H-3040-015043815, with technical data package version 003 and reference number 4D96314G04, to be delivered FOB origin. The Government does not hold data rights for this component and has determined it is not economically feasible to acquire those rights or to reverse engineer the part, thereby limiting procurement to a single source under FAR 6.302-1. While the notice is not a formal request for competitive bids, responsible sources may submit capability statements, proposals, or quotations within 45 days of the synopsis publication, or 30 days if awarded under an existing Basic Ordering Agreement. The Government retains full discretion to decide whether to pursue a competitive process based on any responses received, and all submissions will be evaluated solely to determine if competition is warranted. The solicitation number is N0010426QYAE0, with a response deadline of August 20, 2026, and the point of contact is Amelia E. Harper of the Navy’s NAVSUP Weapon Systems Support Mechanic office in Mechanicsburg, Pennsylvania.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L1-26-T-913C
This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L1-26-T-912N
The contract pertains to the procurement of one cylinder assembly, actuating, linear, identified by NSN 3040-01-651-0388 and part number AVP-0.75X2.25-R, with a quantity of one unit. Delivery is required within ten days from the contract award, with delivery terms set at FOB origin and no quantity variance permitted. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and container specifications. Marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA's Packaging Requirements for Procurement and palletization standards, with shipments directed to the Distribution Management Office at Camp Kinser, Japan. Transportation and freight details reference specific DLA procedural notes, and the item is marked for delivery to MWSS 172. The solicitation number is SPE7L1-26-T-912N, with a response deadline of August 17, 2026, and the original required delivery date is July 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under R and I numbering, with the applicable revision tied to the solicitation or award date depending on acquisition size. The contracting agency is the Department of Defense under the Land Supply Chain, and the point of contact is Kristina Derry.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7L1-26-T-914N
This contract pertains to the procurement of a single rigid connecting link, identified by NSN 3040-01-691-5927 and part number 072249 from L3 Technologies, Inc., with a required delivery within five days of award, delivered FOB destination. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, incorporating specifications identified by R or I numbers. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific packaging methods including preservative treatment, intermediate containment labeled E5, and a packing code of U, while avoiding any use of mercury or mercury-containing compounds except under limited, approved exemptions such as functionally necessary components in batteries, sensors, or weapon systems, which themselves require secondary containment and shock-proof construction per NAVSEA 5100-003D. All supplies must be marked according to government specifications with no additional special markings, and palletization must follow DLA packaging guidelines. The delivery destination is FPO AP 96349, with the final delivery location at the Commander, SRF-JRMC Yokosuka Naval Base in Japan. The contract requires exact quantity compliance with zero variance tolerance and includes specific transportation and freight shipping instructions referenced in DLAD procedural notes. The required delivery date is August 4, 2026, and all compliance, marking, and packaging directives are mandatory for acceptance at destination, where inspection and acceptance will occur.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
The contract pertains to the procurement of a Right Hand Single Arm Mounting Bracket, identified by NSN 5340016150030 and OSHKOSH DEFENSE LLC part number 3764286, with a total quantity of 176 units. Delivery is required within 116 days under FOB Origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and marking per MIL-STD-129 with no special marking codes. Packaging and palletization must adhere to DLA’s official procurement requirements, and hazardous materials handling provisions apply if relevant. The contract is issued under a Small Business Set-Aside, with the solicitation number SPE7LX-26-U-9329 and a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures following MIL-STD-1916 or ASQ H1331, and zero non-conformances expected unless otherwise stated. Identification of U.S. military property must conform to MIL-STD-130N. The unit of issue is each, priced at $176.00 per unit, for a total estimated price of $30,976.00, though this amount is not guaranteed for full purchase by the IDC.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
ARM ASSEMBLY, PIVOT, TRA
Solicitation # SPE7LX-26-U-9303
This contract pertains to the procurement of 459 units of ARM ASSEMBLY, PIVOT, TRACK SUSPENSION with NSN 2530-01-356-4613 under solicitation SPE7LX-26-U-9303, issued by the Defense Logistics Agency through a Total Small Business Set-Aside. The delivery deadline is set at 75 days after award, and the solicitation closed on August 20, 2026, with a posting date of August 5, 2026. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. CMMC Level 2 certification is required for third-party assessment organizations involved, and compliance with DLA packaging standards for procurement is mandatory. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be pre-approved unless explicitly permitted by specification. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting dissemination to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization from DLA. The Point of Contact for this solicitation is Theodore Misiolek, reachable via email and phone as listed.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9318
The contract pertains to the procurement of 631 units of a mounting bracket identified by NSN 5340-01-647-8723 under purchase request 1000239184. The solicitation, numbered SPE7LX-26-U-9318, was posted on August 5, 2026, with a response deadline of August 20, 2026, and requires delivery within 113 days of award. The item falls under NAICS code 332510 and is being sourced by the Department of Defense through the Strategic Acquisition Program Directorate. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies. The primary point of contact is Theodore Misiolek, reachable via email and phone, and all submissions must be made through the DIBBS platform.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7LX-26-U-9330
The contract pertains to the procurement of 180 units of a hand crank identified by part number 1103-1945-01 and NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 76 days FOB origin with no variance allowed in quantity, and acceptance is to occur at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for non-hazardous items and FED-STD-313 for hazardous material classifications. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. The supply is covered under DLA Direct, CONUS, and the unit of issue is each, with a total price of $180. Documentation for source approval must be submitted if proprietary or insufficient data exists, and government identification must be removed from non-accepted supplies. The contract’s technical specifications are derived from the DLA Master List, the applicable revision of which is controlled by the solicitation issue date. Point of contact for inquiries is Theodore Misiolek, with the response deadline set for August 20, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
BRAKE, SEGMENTED ROTOR
Solicitation # SPE7LX-26-U-9296
The contract specifies the procurement of a brake segmented rotor identified by NSN 2530015567156 and part number RDA-1550-951 from Meritor Heavy Vehicle Systems, LLC, under solicitation SPE7LX-26-U-9296. It is classified as a commercial item and falls under a total small business set-aside. The requirement is for 141 units to be delivered FOB origin within 145 days with no variance allowed in quantity. Delivery is to be made to the destination where inspection and acceptance occur. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including individual packaging with QUP 001, and all items must be preserved using code 89 preservative material to prevent corrosion on bare metal, moving parts, and threads. The packaging also requires barrier wrapping with code GC to prevent surface abrasion and corrosion from contact with blocking and bracing materials, and cushioning using code AD rigid low-density materials or wood and plywood conforming to specified standards. All packaging and marking must adhere to MIL-STD-129 with special marking code ZZ indicating “ARROW UP OPEN THIS SIDE.” Blocking and bracing must be designed to protect against shock and vibration, using materials compatible with the load and item surfaces, with wood and plywood members engineered for strength and easy removal without damage. The item is subject to DLA’s master list of technical and quality requirements referenced by R and I numbers, and all contractual obligations are governed by the version of the master list in effect on the solicitation issuance date.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9327
The contract pertains to the procurement of 2,082 units of CLAMP, LOOP with NSN 5340-01-485-6847 under solicitation SPE7LX-26-U-9327, which was posted on August 5, 2026, with a response deadline of August 20, 2026. The acquisition is a Total Small Business Set-Aside as defined by FAR 19.5, classified under NAICS code 332510, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Delivery is required within 116 days after award, and the contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed per RQ011. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CATCH, FLUSH
Solicitation # SPE7LX-26-U-9307
The contract pertains to the procurement of 806 units identified by NSN 5340-01-097-4918 under solicitation SPE7LX-26-U-9307, with a delivery requirement of 118 days after award. It mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information as defined under RD002. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to disposition. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and falls under NAICS code 332510. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact, reachable via email and phone provided. The procurement is classified as federal with no set-aside designation specified.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9284
The contract is for 2,029 plain seals with the NSN 5330-01-504-8614 under solicitation SPE7LX-26-U-9284, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation is a total small business set-aside, meaning only qualifying small businesses may respond, and it is governed by the NAICS code 339991. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for this simplified acquisition. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Source approval documentation must be submitted in accordance with the specified documentation requirements. Delivery is required within 54 days after award, and all responses must be submitted by August 20, 2026. The primary point of contact is Theodore Misiolek, reachable via phone or email, and additional details are available through the DIBBS portal.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LOCK, RIM
Solicitation # SPE7LX-26-U-9319
The contract pertains to the procurement of 297 units of a LOCK, RIM with NSN 5340-01-652-0224, issued under solicitation SPE7LX-26-U-9319 by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement is subject to the DLA Packaging Requirements for Procurement and incorporates technical and quality specifications identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed online for full compliance. For this solicitation, the applicable version of the master list is determined by the solicitation issuance date. The contract is a total small business set-aside under FAR 19.5, with a NAICS code of 332510, indicating it is targeted toward small businesses in the manufacturing sector. The delivery deadline is set for 116 days after award, and the solicitation was posted on August 5, 2026, with responses due by August 20, 2026. Government identification must be removed from any non-accepted supplies in accordance with the specified requirements. The primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone listed in the contract data.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, OIL, HORIZONTAL
Solicitation # SPE7LX-26-U-9310
The contract is for 538 units of a horizontal oil seal with NSN 5330-01-662-9969, solicited under number SPE7LX-26-U-9310 with a response deadline of August 20, 2026, and a required delivery within 98 days of award. This is a total small business set-aside under FAR 19.5, targeting NAICS code 339991 for other miscellaneous manufacturing, and is issued by the Department of Defense’s Strategic Procurement Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA procurement standards, and non-accepted supplies must have all government identification removed prior to return. All data provided is proprietary or insufficient for competitive bidding, indicating the requirement is based on proprietary specifications. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
PARTS KIT, BRAKE SHOE
Solicitation # SPE7LX-26-U-9298
This contract covers the procurement of a Parts Kit, Brake Shoe under solicitation number SPE7LX-26-U-9298, with a national stock number of 2530-01-686-1627 and a required quantity of 242 units, each priced individually for a total estimated value based on unit cost. The delivery must be completed within 79 days, with shipment terms defined as FOB origin, and no variance is permitted in the quantity—neither plus nor minus zero percent. Inspection and acceptance of the goods occur at the destination, and packaging must comply strictly with MIL-STD-2073-1E Appendix D for kits, alongside MIL-STD-129 for marking. All preservation and packaging materials must be free of mercury or mercury compounds, and palletization must adhere to DLA’s Packaging Requirements for Procurement outlined in RP001. The contract references the DLA Master List of Technical and Quality Requirements, incorporating all R and I numbered specifications that apply to the item’s technical and quality standards. The contractor, identified as either DETROIT DEFENSE, INC. or DETROIT DEFENSE SYSTEMS, LLC, must supply the kit under DLA Direct, CONUS coverage, and the item is subject to federal acquisition rules. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and is classified under NAICS code 336330 for automotive parts manufacturing. The point of contact for inquiries is Theodore Misiolek of the Strategic Acquisition Program Directorate within the Department of Defense, reachable via phone and email provided. All documentation must align with DoD unit of issue standards, and no special marking is required beyond standard military labeling. The contract is issued for a simplified acquisition, meaning the version of the DLA Master List in effect on the solicitation’s issue date governs all technical and quality requirements.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 326220
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9313
The contract pertains to the supply of O-RINGS with the national stock number 5331-01-119-0468, for a quantity of 290 units, under solicitation SPE7LX-26-U-9313, with a response deadline of August 20, 2026, and a delivery requirement of 95 days after award. This is a total small business set-aside under NAICS code 326220, managed by the Department of Defense’s Strategic Acquisition Program Directorate. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. All supplies must be free of asbestos, with any alternatives requiring approval per Clause L30 and Provision 4 conditions. Technical and quality requirements identified by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. Documentation for source approval, removal of government identification from non-accepted items, and handling of covered defense information are also mandated. The point of contact for the contract is Theodore Misiolek, reachable via email and phone provided.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details