Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on August 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

SHORTS, EXAM

Closed
SPE2DH-26-T-5726Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The contract is for disposable, latex-free exam shorts in dark blue, made from non-woven material with a sewn-in elastic waistband that expands from 22 to 48 inches to accommodate most patients. Each unit is sold in a package of 50, with the unit of issue defined as one package. All packaging must comply with commercial standards and meet the Medical Marking Standard No. 1, which replaces MIL-STD-129, ensuring proper identification and handling throughout the supply chain. Units must be sealed in protective containers and packed in suitable exterior shipping containers to ensure safe delivery at the lowest carrier rate to the designated point of performance at Edwards AFB, California. The material must be marked according to MMS No. 1, and full compliance with DLA packaging requirements is mandatory. This acquisition falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH, with the solicitation number SPE2DH-26-T-5726, issued on August 2, 2026, and requiring responses by August 10, 2026. Delivery is due within 20 days after award, and the item is identified by NSN 6532-01-532-8007. Technical and quality requirements are governed by the DLA Master List, and removal of government identification from non-accepted supplies is regulated under RQ011. Contact for inquiries is Tina Vu at [email hidden].

General Info

Latex-free dark blue exam shorts, 50 per pack, elastic waistband, compliant with MMS No. 1 and DLA packaging, delivered to Edwards AFB.

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

Place of Performance

32 NIGHTINGALE RD BLDG 5518, EDWARDS AFB, CA, 93524-0001, USA

Set-Aside

NONE

Documents

1

RFQ SPE2DH-26-T-5726 Medical Supply Chain

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA

Full Description

Show more
SHORTS,EXAM
SHORTS, EXAM
..
SIZE: LARGE/XLARGE; COLOR: DARK BLUE; NON-WOVEN
MATERIAL; LATEX-FREE; DISPOSABLE; SEWN-IN ELASTIC
WAISTBAND; WAIST EXPANDS GENEROULSY TO FIT MOST
PATIENTS; WAIST DIMENSIONS: 22 INCHES UP TO 48
INCHES.
..
UNIT OF ISSUE = PACKAGE (PG) OF 50 EACH
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
1 PG = 50 EA .. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
ADEQUATE DATA FOR THE NSN/Part Number: 6532-01-532-8007 Quantity: 1 PG Purchase Request: 7017693017QTY: 1 Delivery: 20 days ADO

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 331313
New
DIBBS
BAG, MEDICAL SUPPLY, EXP
Solicitation # SPE2DH-27-T-0295
Solicitation SPE2DH-27-T-0295 is a request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of three expandable medical supply bags under NSN 6530-01-566-0689. The required bags must be constructed from 1680 Enier Super Ballistic Nylon and feature a hanging drawer system that folds out to ten clear pockets, an adjustable shoulder strap, padded handles, and hanging grommets. Dimensions are specified as 24 to 48 inches in length and 12 inches in width, with pockets measuring 12 inches by 4 inches by 3 inches. The bags must also include two exterior double pockets for paper storage. The contract requires delivery to San Antonio, Texas, within five days after receipt of order, with FOB Destination terms. Compliance with Medical Marking Standard No. 1 is mandatory, superseding MIL-STD-129. Packaging must adhere to commercial standards, MIL-STD-2073-1E, and DLA packaging requirements RP001. Evaluation will consider price, including HUBZone preferences, and technical quality based on the DLA Master List of Technical and Quality Requirements; however, items produced via additive manufacturing are ineligible. Bidders must provide source and part numbers, and the award process may be automated. Invoicing is to be processed electronically through the Wide Area WorkFlow system.
Alumina Refining and Primary Aluminum Production

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS