Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Signal Cable Manufacturing and Assembly

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and assembly of 13 units of UUT Signal Cable AI, identified by NSN 4920-01-563-6058, in full compliance with military specifications. Critical requirements include strict configuration control throughout the production process, calibration of all test equipment to ensure accuracy, and adherence to zero-defect sampling standards to guarantee quality and reliability. The scope encompasses all stages of production from fabrication to final assembly, with an emphasis on meeting stringent operational and environmental performance benchmarks expected for military-grade components. This is a subcontract opportunity under NAICS code 334310, issued by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline set for August 14, 2026. The place of performance and specific office location are not detailed, but the work must be executed to meet federal defense standards. Interested parties must submit proposals via the provided DIBBS portal before the deadline, ensuring full alignment with the technical, quality, and compliance mandates outlined in the requirement.

General Info

Manufacture 13 UUT Signal Cable AI units to military specs with zero defects and strict configuration control.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334310 - Audio and Video Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and assembly of 13 units of UUT Signal Cable AI (NSN 4920-01-563-6058) to military specifications, including configuration control, test equipment calibration, and compliance with zero-defect sampling standards.

Similar Contracts

Same NAICS industry code

Very High Frequency Lock-in Amplifier (VHFLI)

Solicitation # W911QX26QA146

The U.S. Department of Defense through the W6QK Acc-Apg Adelphi office is seeking proposals for a Very High Frequency Lock-in Amplifier (VHFLI) under solicitation number W911QX26QA146, which was posted on July 31, 2026 with a response deadline of August 14, 2026 at 7:00 PM Eastern Time. This presolicitation notice is intended to gather industry feedback and does not constitute a formal solicitation, but it outlines the government’s intent to procure a specialized instrument designed for high-frequency signal detection and measurement. The procurement is classified under NAICS code 334310, indicating it pertains to the manufacturing of electronic instrumentation and control equipment. The performance location is designated as Adelphi, Maryland, with a ZIP code of 20783, and all communications must be directed to the primary point of contact, Swati Jain, reachable via email at swati.jain2.civ@army.mil or phone at 520-672-9619. No set-aside status is specified for this opportunity, meaning it is open to all eligible small and large businesses without restrictions based on size, veteran status, or other categories. The contracting activity is based at the Adelphi, Maryland address, and interested parties are encouraged to review the attached presolicitation notice for detailed technical requirements, evaluation criteria, and any anticipated terms or conditions. While the formal solicitation has not yet been released, this presolicitation phase allows vendors to provide input on the government's needs, suggest alternatives, or request clarifications before the official request for proposals is issued. All responses and inquiries should be submitted through the official SAM.gov workspace link provided for this opportunity.

W6QK Acc-Apg Adelphi

POSTED

about 18 hours ago

DEADLINE

Audio and Video Package

Solicitation # M0026426Q0129

The contract titled Audio and Video Package seeks to modernize and expand broadcast and field production capabilities through the acquisition of comprehensive video production, recording, monitoring, lighting, camera support, and signal-routing equipment. This initiative is aimed at enhancing operational readiness and media output by providing advanced technical infrastructure necessary for high-quality content acquisition and transmission across diverse environments. The equipment will support both studio and remote field operations, ensuring seamless integration with existing systems and scalable performance for future mission requirements. Solicitation number M0026426Q0129 was posted on July 17, 2026, with a response deadline of July 24, 2026, and is classified under NAICS code 334310 for communications equipment manufacturing. The contracting activity is led by the Commander under the Department of Defense, with the office located in Quantico, Virginia, and performance expected in Washington, District of Columbia. Primary point of contact is Gabriel Mendez, with Erin Silverthorn serving as the secondary contact, both reachable via official military email addresses. The solicitation is open to qualified vendors, with no specific set-aside type designated, and all responses must be submitted through the official SAM.gov portal prior to the deadline.

POSTED

about 18 hours ago

DEADLINE

Wearable Full-Body Inertial Measurement Unit (IMU) Motion Capture System

Solicitation # NB6710202602024

The Department of Commerce’s National Institute of Standards and Technology (NIST) is soliciting proposals for a wearable full-body inertial measurement unit (IMU) motion capture system under solicitation number NB6710202602024, with a response deadline of August 7, 2026. This procurement is a Total Small Business Set-Aside under FAR 19.5, requiring all offerors to self-certify as small businesses and maintain an active Unique Entity ID in SAM.gov. The system must consist of two full-body IMU suits, each with at least 17 sensors operating at a minimum sampling rate of 60 Hz, capable of offline motion capture with a 20-meter operating range and at least three minutes of continuous recording. Performance must meet strict accuracy standards, including a joint angle root mean square error (RMSE) of no more than 5 degrees when referenced to an optical benchmark, and drift performance must be reported. The system must support export of time-series kinematic data, integration with Unity and Unreal Engine, and SMPTE timecode synchronization. Included deliverables also encompass one three-year software license and 20 sizing expansion clothing units in sizes S–XL. All items must be delivered to the place of performance in Boulder, Colorado, 80305, where government personnel will conduct inspection and acceptance within seven business days of delivery. Ownership transfers only upon formal acceptance. Contractors must comply with U.S. citizenship requirements for on-site personnel and pre-register foreign nationals at least 30 days in advance. Export control compliance is mandatory, requiring valid Export Control Classification Numbers (ECCNs) at award. The contract includes up to four option periods for calibration and maintenance services, each potentially extending six months to one year. Proposals must align with three attachments: a Request for Quote, detailed Specifications document, and Provisions and Clauses, with submissions expected electronically via the government procurement portal. Packaging, marking, and barcoding requirements are specified only minimally: each unit must bear a unique serial number and a future NIST property number, with no standards for label durability, placement, or barcoding format provided. No pricing information or estimated contract value is disclosed, and while the contracting office is in Gaithersburg, Maryland, no Point of Contact beyond the primary liaison, Lia M. Arthofer, is listed for technical or administrative coordination.

Department Of Commerce Nist

POSTED

about 18 hours ago

DEADLINE

Solicitation # N6471026Q0009

The Contract for the WOC Upgrade under solicitation N6471026Q0009 requires the design, installation, configuration, and testing of a fully integrated audiovisual system for an operations center at the Strategic Weapons Facility Pacific in Bangor, Washington. The system must be wired only, with no wireless or infrared components, and must support both classified and unclassified video and audio functions with seamless routing between sources and eight 4K hospitality monitors. The AV control system includes two wired touch panels with intuitive graphical interfaces for managing room modes, classification status, video conferencing, source routing, microphone and camera controls, and user presets. The system must integrate with Unified Communication and Collaboration Systems, featuring Cisco-compatible hardware where preferred, dual 10GB fiber uplinks, and compliant switches certified for Information Assurance and Trade Agreement Act compliance. All hardware, software, cabling, and rack infrastructure must be procured by the contractor, who must verify existing government infrastructure adequacy and provide additional equipment if needed, including power solutions and cooling. The contractor is responsible for delivering the complete system with full source code upon completion, and must provide comprehensive on-site training for both IT administrators and end users, including electronic delivery of manuals and user guides within 14 days of installation. Maintenance support is required for one year with four optional extension years, covering all repairs, software upgrades, firmware updates, and technical support via phone or remote access. The support desk must respond within two hours for major outages and eight hours for minor ones, with on-site visits completed within one to three business days. All personnel must hold valid AVIXA or InfoComm CTS certifications, possess Secret clearances, be U.S. citizens, and comply with strict security, access, and operational protocols. Work is subject to stringent base access rules, including the use of designated escort services, prohibition of personal wireless devices and photography, adherence to HERO restrictions, and full compliance with OPSEC, AT/FP, and OSHA requirements. The system must be installed, tested, and handed over under a detailed Plan of Actions and Milestones due within 30 days of contract award, with all deliverables submitted electronically to ensure full compliance with the Department of Defense’s operational security and procurement standards.

Strategic Weapons Facility Pac Financial

POSTED

about 18 hours ago

DEADLINE

647 Augmented Firearm Training System

Solicitation # FA521526Q0026

The solicitation for the 647 Augmented Firearm Training System under contract number FA521526Q0026 is a combined synopsis and solicitation for commercial items, structured in accordance with RFO Part 12, and is exclusively set aside for small businesses as determined by the SBA. The effort is managed by the Department of Defense through the office located at JBPHH, Hawaii, with performance expected at the same location. Offerors must refer to the attached Combo and Salient Characteristics files for detailed submission instructions, and all questions received during the solicitation period have been compiled and published in an amendment dated July 31, 2026, which also includes updates to the system description. The response deadline for submissions is August 15, 2026, at 3:00 a.m. Eastern Time, with primary point of contact SSgt Spencer Moses and secondary contact Steven Taylor available for inquiries. Funds for this contract are not currently available, and any obligation by the government is strictly contingent upon the future appropriation and availability of funds. No legal liability is incurred by the government until such funds are formally allocated to the Contracting Officer and the contractor receives written confirmation of availability. The contract includes the RFO clause 52.232-18, “Availability of Funds,” which reinforces that payment and performance are conditional on funding being made available. All submissions must be made through the designated SAM.gov portal, and prospective vendors are advised to review all documentation thoroughly before proposing, as failure to comply with formatting or inclusion requirements may result in rejection.

FA5215 766 Ess Pkp

POSTED

about 18 hours ago

DEADLINE

Solicitation # FA487726QA137

FA4877 355 Cons Pk

POSTED

about 18 hours ago

DEADLINE

W3999-260017 - Audiovisual Systems

Solicitation # WS5585343788

The Department of National Defence is seeking to modernize the Emergency Operations Centre at 17 Wing Winnipeg, specifically in Building 136, through the procurement of comprehensive audiovisual systems. The scope of work encompasses the full lifecycle of the systems, including equipment supply, engineering design, project management, fabrication, assembly, software programming, installation, documentation, training, and warranty support. All bids must be submitted by 2:00 p.m. EDT on August 4, 2026; any submissions received after this time will be deemed non-responsive, regardless of deadlines listed on external platforms such as Ariba Discovery or CanadaBuys. The solicitation number is WS5585343788, classified under NAICS code 334310, and is issued by the Government of Canada through Public Services and Procurement Canada. The primary point of contact for inquiries is Mohamed Shawky Elgallab, Contracting Authority, reachable at mohamedshawky.elgallab@tpsgc-pwgsc.gc.ca. The work is to be performed at the specified location in Winnipeg, Manitoba.

Department of Public Works and Government Services

POSTED

DEADLINE

Electrical Connector Supply (Military-Grade)The contract entails the procurement and delivery of military-grade electrical connectors identified by NSN 5935016025045, specifically engineered to meet stringent Department of Defense specifications set by the Active Devices Division. All delivered units must adhere to exact technical standards ensuring full compatibility, durability, and performance under demanding operational conditions, with each batch subject to rigorous government inspection to verify compliance and readiness for military use. The requirement emphasizes absolute technical accuracy and documentation integrity to support seamless integration into defense systems and logistics frameworks. Performance is mandated to occur at Tracy, California, with a delivery window aligned to the solicitation deadline of August 10, 2026, following a posting date of July 30, 2026. This is structured as a subcontract under NAICS code 334310, indicating a focus on electronic component manufacturing for defense applications. While no set-aside provisions are specified, suppliers must respond through the designated DIBBS platform, ensuring all proposals, certifications, and compliance documentation are submitted in full alignment with federal procurement protocols for defense-related hardware.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Push Switch (NSN 5930-01-473-9921)The contract calls for the supply and delivery of five military-specification push switches identified by NSN 5930-01-473-9921, encompassing all aspects of procurement from sourcing to final shipment. The vendor is responsible for ensuring full compliance with military standards, including proper packaging, preservation techniques to maintain integrity during transit, and accurate marking to meet DoD requirements. Delivery is to be made FOB origin, meaning the buyer assumes responsibility once the goods leave the supplier’s facility. The requirement is structured as a subcontract under NAICS code 334310, which pertains to other electronic component manufacturing, and is managed by the Electrical Devices Division within the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is accessible via the DIBBS platform for qualified contractors.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Telecommunications Handset SupplyThe contract calls for the supply of three military-spec telecommunications handsets identified by NSN 5965016618471, with strict adherence to DFARS compliance and hazardous material labeling standards to ensure operational and regulatory suitability for defense applications. The solicitation is issued under the NAICS code 334310 for communications equipment manufacturing, and the work is to be performed at Tracy, California, with a zip code of 95304-5000 as the designated place of performance. The contract is categorized as a subcontract, and while no set-aside type is specified, the procurement is managed by the Active Devices Division within the Department of Defense. Interested parties must submit responses by the deadline of August 10, 2026, with the opportunity advertised as of July 30, 2026, and further details accessible through the official DIBBS portal.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Small Business Subcontracting ParticipationCertified small businesses are invited to participate as suppliers or service providers under the prime contractor’s small business subcontracting plan for a contract managed by the Active Devices Division of the Department of Defense. This opportunity is tied to the NAICS code 334310, which pertains to electronic component and product manufacturing, with performance expected to take place in Tracy, California, at ZIP code 95304-5000. The solicitation is open for responses until August 10, 2026, with the opportunity posted on July 30, 2026, and is structured as a subcontracting initiative designed to increase small business involvement in federal contracting. Participation is restricted to certified small businesses, and potential vendors are encouraged to review details through the provided DIBBS link to ensure alignment with subcontracting goals and requirements set by the prime contractor.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Electrical Connector Manufacturing & SupplyThe contract calls for the precision manufacturing and supply of an electrical connector retainer identified by NSN 5935-01-164-83, requiring full compliance with military specifications for packaging, marking, and hazard communication to ensure operational readiness and safety. The item is intended for military use and must be produced to exacting standards to maintain interoperability and reliability within defense systems. All deliverables must adhere strictly to the technical requirements dictated by applicable military standards, with no deviations permitted without prior authorization. This is a subcontract opportunity under NAICS code 334310, posted by the Active Devices Division of the Department of Defense, with performance location specified as Tracy, California, 95304-5000. Responses are due by August 10, 2026, and interested parties must submit proposals prior to the deadline to be considered. The contract does not specify a set-aside status, meaning it is open to all eligible vendors regardless of business size or type. The solicitation is accessible through the DIBBS platform, and all communications and submissions must follow the official procurement process outlined in the posting.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

TRANSMITTER, PRESSURE

Solicitation # SPE4A5-26-Q-0661

The contract pertains to the procurement of 75 pressure transmitters, identified by NSN 6685-21-912-0457 and part number 622712-2-1 from Honeywell Limited, classified as a commercial item and designated as a critical application item. The requirement is firm fixed price with no variance allowed in quantity, and delivery is mandated 477 days after award date. Inspection and acceptance occur at origin, and the item is to be shipped FOB origin. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced with R-numbers including RC001, RP001, RQ011, and RT001, which take precedence over any other standards. Packaging must conform to MIL-STD-129 and RP001, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items follow ASTM D3951 unless superseded by DLA requirements. Unit of issue is each, and palletization must meet DLA packaging standards. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is Warner Robbins Air Force Base with specific parcel post and freight shipping addresses provided, and the material need date is June 7, 2028.

POSTED

about 13 hours ago

DEADLINE

TRANSMITTER, PRESSUR

Solicitation # SPE4A5-25-T-785M

The contract involves the procurement of five units of the NSN 6685013158618 Transmitter, Pressure, which is designated for delivery to the DLA Distribution at W1A8 within 171 days after award. The procurement is set aside exclusively for Women-Owned Small Businesses (WOSB) under NAICS code 334512, emphasizing opportunities for eligible small business vendors. The solicitation is issued as a Request for Quotation (RFQ), accessible electronically through the provided link, with no hard copies or detailed specifications, plans, or drawings available. All responsible sources are encouraged to submit quotes by the deadline of October 1, 2025, and submissions must be made electronically. The contracting agency is DLA Aviation, part of the Department of Defense, based in Richmond, Virginia. Questions regarding the solicitation should be directed via email to the designated point of contact, with further details available through the official DIBBS website. The contract emphasizes timely response and compliance with the set-aside criteria, ensuring that qualified small businesses, particularly women-owned, have the opportunity to participate in fulfilling this procurement requirement.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE4A5-26-Q-0618

The contract pertains to the procurement of three non-magnetic shackles identified by NSN 4030-01-481-9608 under solicitation SPE4A5-26-Q-0618, with a firm fixed price and zero variance in quantity. Delivery is required within 76 days after order date, with inspection and acceptance occurring at origin, and delivery terms set to FOB destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA's RP001 packaging requirements, including preservation methods, material specifications, and MIL-STD-129 marking without special markings. Mercury and mercury-containing compounds are prohibited in all aspects of the supply chain including preservation, packaging, and direct contact with hardware, except for specific permitted applications such as batteries, fluorescent lamps, sensors, or weapon systems as outlined by NAVSEA, which must include secondary containment. Ozone-depleting substances are entirely banned, regardless of any conflicting specification language, and all substitutions require prior approval. Technical data is proprietary or insufficient, precluding competitive sourcing, and casting or forging may be necessary for manufacturing, requiring suppliers to request tooling and material assistance through DLA’s designated channels. The item is subject to zero-based sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Item unique identification is not required per customer request, but compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date based on acquisition type. The contract is a total small business set-aside, and all deliveries must be addressed to DLA Distribution in San Diego, California.

POSTED

about 13 hours ago

DEADLINE

LIGHT, NAVIGATIONAL, AIR

Solicitation # SPE4A5-26-Q-0660

This contract is for the procurement of two units of a light, navigational aircraft component identified by NSN 6220-01-454-3041 and part number 30-2443-2 from Grimes Aerospace Company. The item is classified as a critical safety item and a commercial product of a type, subject to stringent quality oversight including SAE AS9100 requirements for manufacturers and non-manufacturers. All supplies must comply with MIL-STD-129 marking standards, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, with special fragile labeling. Unit packaging and palletization must adhere to MIL-STD-2073-1E and DLA packaging requirements, with no government identification removed from non-accepted items. Inspection and acceptance occur at origin, with firm fixed pricing and zero variance allowed in quantity. Delivery is due 333 days after order date, with FOB origin terms, and freight is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Cybersecurity requirements include CMMC Level 2 self-assessment, and all deviations or waivers require formal approval from the DSC Contracting Officer. Technical and quality requirements are drawn from the DLA Master List, with documentation tied to QAP-106 Revision B dated July 9, 2012, and the item is not subject to Item Unique Identification per Service customer request.

POSTED

about 13 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE4A5-26-T-308A

The contract pertains to the procurement of a power transformer, specifically identifiable by part number 397849-07403 and NSN 5950009576725, designated as a critical application item supplied by SIMMONDS PRECISION PRODUCTS INC. The requirement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and compliance with MIL-STD-129 for labeling and packaging. The item must be packaged in accordance with Fed-Std-313, using IP025 for hazardous materials or commercial packaging otherwise, and palletized per DLA Packaging Requirements. The transformer is subject to zero defect acceptance under MIL-STD-1916 or an equivalent zero-based sampling plan, with all attributes treated as major unless otherwise specified, and inspection and acceptance occur at the destination. Cybersecurity requirements include a CMMC Level 2 Self-Assessment and adherence to rules for covered defense information. Delivery is FOB origin within five days of contract award to the Marine Aviation Logistics Squadron 16 in San Diego, with shipment required via the fastest traceable means excluding parcel post. The contract specifies a fixed quantity of one unit, with no variance allowed, and an original delivery date of July 23, 2026, under solicitation SPE4A5-26-T-308A. The unit of issue is each, and all packaging must reflect the prescribed QUP and DLA-recognized labeling. Additional compliance obligations include physical identification of the item, proper use of measuring and test equipment, and removal of government identification from non-accepted supplies.

Welding and Soldering Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

HOUSING, AIR OUTLET,

Solicitation # SPE4A5-26-T-306Q

The contract pertains to the procurement of one Housing, Air Outlet with NSN 1660-01-665-6502 and part number 189386-2, supplied by Honeywell International Inc., under solicitation SPE4A5-26-T-306Q. Delivery is required within 169 days of award, with FOB origin terms and inspection and acceptance points at the destination. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and palletization must adhere to specified military standards. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise contracted, and attributes are to be classified with corresponding verification levels or AQLs. Item Unique Identification is not required per the Service customer's direction. The supplier must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and handle covered defense information in accordance with RD002. Accelerated life testing at 105% of rated voltage is an acceptable alternative to standard voltage testing. The delivery destination is Tinker AFB, Oklahoma, and all labeling, marking, and documentation must reflect the contract’s exact specifications, including the provided parcel post and freight shipping addresses. The unit of issue is EA, with no variance permitted in quantity, and the original required delivery date is February 13, 2028, with a need ship date of January 17, 2027.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

ADAPTER, STRAIGHT, FL

Solicitation # SPE4A5-26-T-299Z

The contract specifies the procurement of a straight flange-to-tube adapter with part number 9969M50P02 from General Electric Company and NSN 4730-01-196-6006, for a quantity of two units. The item is designated as a critical application item and is subject to stringent technical and quality requirements as defined by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized and labeled per prescribed guidelines. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and unspecified attributes are treated as major. The item does not require unique identification per DFARS 252.211-7003(c)(1)(i) and has no shelf life restriction. Delivery is FOB origin with a 171-day lead time, and the required delivery date is November 27, 2027, with a need ship date of January 17, 2027. The contract mandates zero variance in quantity and requires inspection and acceptance to occur at the point of origin. All packaging and markings must conform to DLA standards, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, in accordance with DLAD Proc Note C19 and C20.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

MOTOR-TACHOMETER GE

Solicitation # SPE4A5-26-T-307W

The solicitation SPE4A5-26-T-307W seeks a single MOTOR-TACHOMETER GE with NSN 6105-00-068-7214, to be delivered within five days after award to the designated delivery point at Naval Base Coronado, San Diego, CA 92135-5017 under FOB DESTINATION terms. The contract is a simplified acquisition targeting automated award, with an estimated value of $147,109 based on multiple line items across various quantities and unit prices. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with compliance mandated through clauses RA001 and RQ001. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes are assigned AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor defects. Packaging and preservation must conform to MIL-STD-2073-1E, including Method 51 for dry cold storage, while labeling and barcoding adhere strictly to MIL-STD-129 with 2D Data Matrix symbols mandated for Defense shipments. Bare item marking is required under RQ017, and any unidentified attributes default to major classification. Compliance with cybersecurity standards includes a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 via clause 252.240-7997. Contractors must submit payment requests and receiving reports exclusively through Wide Area WorkFlow (WAWF) and are subject to DFARS clauses prohibiting hexavalent chromium, hazardous material storage, and acquisition of items from Communist Chinese military companies. Employment practices must comply with clauses addressing equal opportunity, trafficking in persons, and employment eligibility verification. All contractual obligations are fixed-price under FAR 52.246-2, with final inspection and acceptance occurring at destination. The contract includes clauses for accelerated payments to small business subcontractors, unenforceability of unauthorized obligations, and electronic submission of payment data. No formal evaluation factors are listed, implying a potential LPTA award methodology. Offerors must provide their UEI or CAGE code and complete all required representations, though no specific socioeconomic certifications are indicated. No attachments are formally listed

Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

PANEL, STRUCTURAL, AI

Solicitation # SPE4A5-26-T-308G

The contract pertains to the procurement of a structural panel, AI, identified by NSN 1560016882236 and part number 113T1617Y103, with three separate line items each for one unit, delivered under solicitation SPE4A5-26-T-308G. Delivery is required within five days of order, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All items must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging directives, with no special marking codes applied. Palletization must adhere to DLA procurement packaging rules, and shipment must be sent via traceable freight methods; parcel post is explicitly prohibited. The part is designated a critical application item and must meet FAA airworthiness approval standards under RQ019, including conformance certification. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and configuration change management procedures apply through RQ002. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and verification levels for attributes are strictly defined. The item is excluded from Unique Item Identification per government request. Required delivery dates vary slightly across line items, with the latest due on July 21, 2026, and all shipments are directed to McConnell AFB, Kansas, with specific government use identifiers and project codes appended. The contract references technical and quality requirements from the DLA Master List, governing revisions based on acquisition type and amendment dates.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-307M

The contract pertains to the procurement of a single shaft assembly, actuator, identified by NSN 1680-01-011-8060 and part number AA8586 manufactured by Simmonds Precision Products Inc. Delivery is required within 172 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The unit of issue is each (EA), with no variance permitted in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RA001, RP001, RQ002, RQ011, RQ017, and RT001, which override any conflicting standards. Packaging must comply with ASTM D3951 and MIL-STD-129, aligned with DLA Packaging Requirements for Procurement, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and identification of critical, major, and minor attributes must adhere to specified verification levels or AQLs. Configuration change management, deviation requests, and removal of government identification are strictly controlled. The item is classified as a critical application component. Delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2026, though the original delivery target is February 1, 2027. The solicitation was issued under SPE4A5-26-T-307M with a response deadline of July 31, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SENSOR ASSY, SKIN TE

Solicitation # SPE4A5-26-T-307L

The contract pertains to the procurement of a Sensor Assembly, Skin Temperature, identified by the NSN 1680-00-792-9233 and part number 969-0032-001, supplied by Honeywell International Inc. and Acron Aviation Inc. The item is classified as a commercial item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which take precedence over all other specifications. The manufacturing and delivery must adhere to DLA packaging standards per RP001 and MIL-STD-129, with all packaging compliant with ASTM D3951 unless superseded by DLA requirements. Physical marking of the bare item is mandated, and while Item Unique Identification is not required, government identification must be removed from non-accepted supplies. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and inspection and acceptance occur at the destination. The contract specifies a delivery requirement of 133 days FOB origin, with no variance allowed in quantity, and a total of 67 units to be delivered to Tinker AFB, Oklahoma. The unit price is $67.00 per unit, totaling $4,489.00. Cybersecurity compliance is enforced through CMMC Level 2 self-assessment, and all suppliers must meet the DLA’s stringent quality and documentation protocols including source approval requests. The solicitation is a Total Small Business Set-Aside under NAICS 336413, with responses due by July 31, 2026, and performance required by July 21, 2026. Transportation and shipping instructions follow DLA procedural notes C19 and C20, and all labeling, packaging, and documentation must align with the contract’s referenced standards and the specified Unit of Issue.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-9432

The contract specifies the procurement of a Shaft Assembly, Actuator with NSN 1680010118060 and part number AA8586, manufactured by Simmonds Precision Products Inc, under solicitation SPE4A5-26-T-9432. Four units are required at a fixed quantity with zero variance, to be delivered FOB origin within 27 days of contract award, with delivery scheduled for April 13, 2027. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly following government specifications. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are subject to the most stringent verification levels. The supplier must manage configuration changes through formal Engineering Change Proposals and ensure all non-accepted supplies are properly de-identified per RQ011. All technical, quality, and packaging directives, including those identified by R or I numbers, are binding and must be referenced from the official DLA eProcurement portal. The item is classified as a Critical Application Item, and delivery must be sent to the designated DLA distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD Proc Notes C19 and C20.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE