This Solicitation opportunity from Government of Canada was posted on March 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Signal Generator Waveforms

Closed

ISED215494Canada

Submission Closed03/25/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334290

New

Federal

58--Intent to Sole s Source InnovaSea ProductsThe U.S. Department of the Interior’s U.S. Geological Survey Columbia Environmental Research Center intends to award a sole source contract to Innovasea for the procurement of specific acoustic telemetry transmitters and receivers. This acquisition is justified on the basis that only Innovasea can provide the necessary equipment to meet the agency’s requirements, including models such as the HR2-180kHz High Residency Receiver, NexTrak R1 Transponding Acoustic Receiver with battery, V9 180 kHz Transmitter, and V9 Transmitter with Pressure Sensor. The action will be conducted under FAR 13.106-1(b)(1), allowing negotiation with a single source without competition. This notice is strictly for informational purposes and does not constitute a request for quotes or bids. However, other responsible parties interested in demonstrating their capability to supply the specified equipment are encouraged to submit a written capability statement by the specified deadline. Submissions must be detailed and cost-free, supporting the responder’s bona fide ability to fulfill the requirement, and must be sent via email to the designated contact. The government reserves full discretion in determining whether to proceed with sole source negotiations or cancel the requirement, and no verbal or phone inquiries will be accepted. The NAICS code associated with this procurement is 334290, covering other communications equipment manufacturing.

Ofc Of Acqusition Grants-National

POSTED

DEADLINE

58--MODEM ASSEMBLY,COMM- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OFThe contract involves the procurement of 33 units of modem assemblies, specifically for communication and similar replacement parts used in repair or modification processes. The delivery terms are FOB origin, and the Government does not hold ownership or rights to the data necessary for purchasing or contracting repairs from other sources. It has been determined that acquiring the data rights or reverse engineering the part is not cost-effective. Interested parties can access relevant Military and Federal Specifications, Standards, and Qualified Product Lists through the DoD Single Stock Point or ASSIST-Online platforms. This contract will be awarded through a sole-source negotiation under FAR 6.302-1, although any responsible party may express interest or submit proposals within 30 days from the posting date of the solicitation. The Government retains discretion over whether to proceed with a competitive procurement based on the responses received. Only offerors meeting qualification requirements at the time of award, as specified in FAR clause 52.209-1, will be considered. The contracting agency is the Department of Defense’s Naval Supply Systems Command Weapon Systems Support Mechanical office located in Mechanicsburg, PA, with Ethan Lentz designated as the point of contact for inquiries. The solicitation is open until July 6, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Wireless Intrusion Detection SystemThe Department of Defense plans to award a Firm-Fixed-Price sole source contract to Berkeley Varitronics Systems for the purchase of WallHound-Pro Wireless Detection and Deterrent Alert Systems. This system is specifically required to comply with the September 2023 SECDEF mandate for Wireless Intrusion Detection Systems (WIDS) used in Sensitive Compartmented Information Facilities (SCIF) and Special Access Program Facilities (SAPF). The WallHound-Pro is uniquely suitable as it detects unauthorized personal electronics without relying on Wi-Fi or Bluetooth signals, capturing signals from 2G through 5G cellular networks, as well as Wi-Fi bands (2.4 GHz and 5.8 GHz) and Bluetooth Low Energy. The contract anticipates delivery within 14 days after receipt of order, with an award date targeted for July 13, 2026. Although this notice is not a request for quote and costs related to responses will not be paid by the government, all responsible sources are encouraged to submit quotations or proposals for consideration. The procurement is managed by the office at Hill Air Force Base, Utah, under solicitation number FA8201-26-Detection, with designated points of contact available for further information.

FA8201 Afsc Ol H Pzio

POSTED

DEADLINE

Gen6 Lifecycle Sustainment Risk AssessmentThe contract aims to secure a Gen6 Lifecycle Sustainment Risk Assessment for the Naval Air Systems Command Program Management Activity 209 (PMA-209) Air Combat Electronics, focusing on the AN/ARC-210(V) RT-2036(C) radio system. This assessment is intended to help Collins Aerospace, the designated contractor, evaluate the sustainment capabilities of the Gen6 system. The scope of work includes delivering one risk assessment along with a mid-term and a final briefing detailing the progress and findings of the task. The procurement is being conducted on a sole-source basis under the authority that recognizes Collins Aerospace as the only responsible source due to their exclusive rights to the commercial electronic protection radio systems and associated technical data required. The acquisition is classified as a presolicitation with no competitive proposal requested at this stage, and the government explicitly states no intent to fund development or qualification of other sources. Interested parties may express their interest and capability by the deadline to be considered for the potential of a competitive procurement, although the government retains sole discretion on whether to pursue competition. The contract falls under NAICS code 334290 and will be executed primarily in Cedar Rapids, Iowa. All inquiries are to be submitted via email by the specified deadline, and those interested in subcontracting should contact Collins Aerospace directly.

Naval Air Warfare Center Air Division

POSTED

DEADLINE

MODEM,COMMUNICATIONThis contract pertains to the procurement of communication modems under solicitation number SPRMM126QHD32 issued by the Defense Logistics Agency (DLA) Mechanicsburg, part of the Department of Defense. The contract outlines detailed requirements for the manufacture, delivery, inspection, acceptance, packaging, and quality assurance of the specified modems, which must conform to identified Cage Codes and part numbers. The modems are required to meet MIL-STD-130 marking standards, and any changes to design, materials, or part numbers must be approved by the contracting officer through a formal change order process. The contract also mandates the use of electronic invoicing and receiving report submission through the Wide Area Workflow (WAWF) system. Inspection responsibilities are primarily on the contractor, who must maintain records of inspections for a year following final delivery, while the government retains the right to perform additional inspections as needed. Packaging must comply with MIL-STD 2073 requirements. Only authorized distributors of the original manufacturer’s items may be considered for award, with documentation proving authorization required at the time of proposal submission. The contract follows a Lowest Price Technically Acceptable (LPTA) award criterion and places emphasis on cybersecurity, supply chain security, and compliance with Defense Federal Acquisition Regulations Supplement (DFARS). Contractors are encouraged to register with electronic systems such as NAVSUP WSS and PIEE to streamline communications and contract management. The response deadline for this solicitation is June 25, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

in 14 days

AI Contract Overview

Innovation Science and Economic Development Canada (ISED) is seeking bids under Supply Arrangement E60HN-16ELEC for the acquisition of Signal Generator Waveforms, specifically to upgrade the SMW200 signal generator used by the Certification and Engineering Bureau (CEB). The upgrade involves the addition of waveforms for LoRa, Bluetooth, 802.15.4, and 802.11be to support new digital modulation formats. This enhancement will bolster the CEB’s capabilities in testing wireless devices, ensuring compliance with regulatory standards, preventing interference, fostering fair market competition, and maintaining consumer safety. Additionally, it will improve the bureau’s market surveillance functions, support advanced engineering analysis of emerging technologies, and contribute to the development of regulatory standards. Only suppliers already holding a Supply Arrangement in series E60HN-16ELEC with Public Services and Procurement Canada (PSPC) are eligible to submit bids. The solicitation is limited to one contract award, with a closing date of March 25, 2026, at 19:00 EDT, and requested delivery of all goods by March 31, 2026. Bidders may direct inquiries to the designated Contracting Authority, Rima Salika. The place of performance for this contract is Canada, and all activities will be conducted under the auspices of the federal Department of Industry. The full solicitation details are accessible through the CanadaBuys portal.

General Info

ISED seeks bids to upgrade SMW200 signal generator with new waveforms, closing March 25, 2026.

Agency

Government of Canada → Department of Industry

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(2)

ISED-215494 Signal Generator Waveforms RFP

PDF•rfp

Notice of Proposed Procurement for Signal Generator Waveforms E60HN-16ELEC

PDF•notice-of-proposed-procurement

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMar 16

Solicitation

Response DeadlineMar 25

Deadline has passed

Submission Closed

03/25/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Industry

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of Industry

Office AddressN/A

Contacts

Rima SalikaContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

Innovation Science and Economic Development Canada (ISED) is soliciting bids under Supply Arrangement E60HN-16ELEC for the purchase of Signal Generator Waveforms as detailed in the attached bid solicitation document. Canada may award one contract under this solicitation. Closing date: [insert date/time].” The Certification and Engineering Bureau (CEB) needs to upgrade its SMW200 signal generator with additional waveforms—LoRa, Bluetooth, 802.15.4, and 802.11be—to support evolving digital modulation formats. By enabling testing across new radio frequency technologies, the upgrade helps ensure wireless devices meet regulatory requirements, avoid harmful interference, support fair competition in the marketplace, and remain safe for Canadian consumers. This upgrade will enhance the CEB’s ability to perform market surveillance of wireless products sold in Canada, conduct advanced engineering studies on emerging technologies, and contribute to regulatory standards development. Only pre-qualified Suppliers have been invited to bid. Suppliers that do not already hold a Supply Arrangement in series E60HN-16ELEC with PSPC cannot submit a bid. Requested delivery date for all of the goods is on or before March 31st 2026.