Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SIGNAL PROCESSOR

Active
SPRPA126QZC12Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of a signal processor. Classified as a Critical Application Item, the request is being processed under Emergency Acquisition Flexibilities. The procurement falls under NAICS code 336413 and requires adherence to specific standards, including MIL-STD-130 for markings and unique identification, as well as MIL-STD 2073 for packaging. The contract includes various regulatory requirements, such as the Buy American-Free Trade Agreements program and equal opportunity provisions for veterans and workers with disabilities. Payments are to be handled through the Wide Area Workflow system using combined invoice and receiving reports. The solicitation was posted on September 11, 2026, with a response deadline of October 13, 2026.

General Info

DoD DLA Aviation procurement for a critical signal processor due October 13, 2026.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Pa DLA Aviation At Philadelphia
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|||X|TBD||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Report (combo)|N/A|TBD|SPRPA1|TBD|TBD|See Schedule|TBD|N/A|N/A|TBD|N/A|N/A|N/A|N/A|N/A| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|Robyn.Grinarml@dla.mil| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| ESTIMATE OF PERCENTAGE OF RECOVERED MATERIAL CONTENT FOR EPA DESIGNATED PRODUCTS (MAY 2008))|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| No drawings are available for this Request for Quotation. NAICS Code: 336413 Small Business Size Standard: 1250 This solicitation is being solicited under Emergency Acquisition Flexibilities (EAF) Authority formally known as Special Emergency Procurement Authority (SEPA). THIS IS A CRITICAL APPLICATION ITEM (CAI). \ 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS - NOT APPLICABLE 4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES ASSIGNMENT OF UNIQUE IDENTIFICATION (UID) AND SERIALIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-130, (LATEST REVISION) REFERENCED BY MIL-DTL-18307H ATTHIS TIME./

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Manufacturing of Duct Assembly, Heat Exchanger (NSN 1560-00-264-1351)
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
First Article Testing and Validation Services
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Manufacture and Supply of Aviation Component (NSN 6150-01-352-3934)
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
PISTON ASSEMBLY,HYD
Solicitation # SPRPA126QZC11
Solicitation SPRPA126QZC11, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of hydraulic piston assemblies. The requirement is divided into two subclin items, requesting three units for subclin 0001AA and two units for subclin 0001AB, both with a delivery timeframe of 477 days. This procurement is designated as a Critical Safety Item and is being conducted under Emergency Acquisition Flexibilities authority. The contract falls under NAICS code 336413 and may be conducted via a reverse auction. Award decisions will be based on a balanced evaluation of price, delivery timeframe, and past performance. Key compliance requirements include the Buy American Act, Item Unique Identification and Valuation, and specific security prohibitions. Responses are due by October 13, 2026.
Pa DLA Aviation At Philadelphia

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--100 W FILTER PA,AIR, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QTC89
This pre-solicitation under solicitation number N0038326QTC89 is for the repair or modification of 19 units of air filters, identified by NSN 7R-1680-016108983-E7. The delivery terms are FOB Origin. Due to the flight-critical nature of the part and the specialized technical data and manufacturing knowledge required, the government requires engineering source approval from the design control activity to ensure quality. The government intends to solicit and negotiate with a single source under FAR 6.302-1, as existing approved sources hold essential data rights not economically available to the government. Prospective contractors who are not already approved must submit detailed information via the NAVSUP Weapon Systems Support Source Approval brochures to be considered for award. While this is a notice of intent rather than a request for competitive proposals, the government will consider responses and capability statements received within the specified timeframe to determine if a competitive procurement is warranted.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
COMPUTER,FLIGHT CON
Solicitation # N0038326QAB02
This contract is a solicitation from the Navsup Weapon Systems Support for the repair and overhaul of flight control computers and fuel control panels to return them to a Ready For Issue condition. The contractor is responsible for providing all necessary labor, materials, and tooling, ensuring that all work adheres to specific BAE Systems Controls drawings and quality standards, including ISO 9001 and SAE AS9100. Key performance metrics include a strict Repair Turnaround Time (RTAT) measured from the physical receipt of assets, with an induction expiration date set at 365 days after the contract award. The agreement includes detailed protocols for handling items that are Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR) efforts, all of which require DCMA verification and Procuring Contracting Officer approval. The contractor must maintain a rigorous calibration system and a configuration management plan. All parts used must be new per FAR 52.211-5, and any part cannibalization or changes to manufacturing sources require formal government authorization.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--CARTRIDGE,OPERATING- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNB27
This pre-solicitation from the Navsup Weapon Systems Support is for the procurement of 16 units of operating cartridges and similar replacement parts under NSN 7R-1680-016098984-P8. The delivery terms are FOB Origin. Because the items are flight critical, the government requires source approval prior to the contract award. Only previously approved sources have been solicited, though new sources may apply by submitting the required documentation detailed in the NAVSUP WSS Source Approval Information Brochures. The government intends to negotiate with a single source under FAR 6.302-1, but interested parties may submit proposals or capability statements within 45 days of the notice. Award is contingent upon the offeror meeting all qualification requirements at the time of award. This acquisition is not being conducted under FAR Part 12 for commercial items, and it is subject to various Free Trade Agreements and the Buy American Act.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--MANIFOLD ASSEMBLY,H, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB42
This solicitation from Navsup Weapon Systems Support is for the repair of three Manifold Assembly, H units (NSN 1650 017257552). The contractor is responsible for providing all labor, materials, and tooling necessary to return the assets to a Ready For Issue condition, with an option for up to two additional units over the contract period. Pricing should be submitted as firm-fixed or TT&E, with separate pricing provided for the second year if costs change after the first 365 days. Key operational requirements include strict adherence to Repair Turnaround Times (RTAT), which are measured from the physical receipt of the asset to final government acceptance. The contractor must utilize the Commercial Asset Visibility (CAV) system for transaction reporting and follow specific guidelines for Beyond Economical Repair (BER), Missing on Induction (MOI), and Over and Above Repair (OAR) determinations, all of which require DCMA concurrence and PCO approval. Quality standards must comply with ISO 9001/SAE AS9100, and the use of MIL-W-81381 wire is strictly prohibited in favor of SAE-AS22759 series wire.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
DIBBS
63--DETECTOR,HEAT
Solicitation # SPE4A6-26-U-4166
This contract is for the procurement of eight heat detectors under solicitation SPE4A6-26-U-4166, identified by NSN 6340015254625. The requirement is a total small business set-aside issued by the Department of Defense ASC Commodities Division. Key approved manufacturers include RTX Corporation, Meggitt Safety Systems Inc, and Lockheed Martin Corp. Delivery is required within 133 days, with FOB, inspection, and acceptance all occurring at the origin. The item is designated as a critical application item and requires Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. Quality assurance is governed by zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and palletization must adhere to RP001 DLA requirements and MIL-STD-129 for marking. Additionally, the contract notes that specialized tooling for casting or forging may be necessary, for which the government provides assistance requests through DLA.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
16--SEAT RESTRAINT
Solicitation # N0038326QFC01
This solicitation, issued by the Navsup Weapon Systems Support under the Department of Defense, is a sole source requirement for 87 seat restraints, identified by part number 4166AS0520-01 and NSN 1RM 1680 016870353 BL. The procurement is managed by Casey Brown out of the Philadelphia, Pennsylvania office, with a response deadline of October 13, 2026. The contract mandates Government Source Approval prior to award, and bidders must provide all necessary documentation as detailed in the NAVSUP WSS Source Approval Brochure to be considered. Key regulatory requirements include adherence to the Buy American Act, Free Trade Agreements, and the World Trade Organization Government Procurement Agreement. Payments are to be processed via Wide Area Workflow using a combined Invoice and Receiving Report.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
DIBBS
16--PAD,WEAR,LANDING GE
Solicitation # SPE4A7-26-T-731H
This contract is for the procurement of 5,676 wear pads for main gear brake systems, identified as critical application items under NSN 1620-01-112-2967. The requirements specify adherence to drawing 1620-UH60-001 Revision C and include approved sources such as Meggitt Aircraft Braking Systems Corporation, Parker-Hannifin Corporation, and National Machine Company. The agreement mandates strict quality and technical standards, including specific DLA packaging requirements, physical identification marking, and a zero-based sampling plan for inspection and acceptance. The order is managed under solicitation SPE4A7-26-T-731H with a required delivery date of July 2, 2027, and a delivery timeline of 81 days. Shipping is designated as FOB Origin, with the final destination being DLA Distribution Albany in Georgia. Compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging is required to ensure the integrity of the aircraft components during transport.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
16--MANIFOLD ASSEMBLY,H, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB41
This solicitation from Navsup Weapon Systems Support is for the repair and overhaul of four Manifold Assembly, H units (NSN 1650 017257552) to return them to a Ready For Issue condition. The contractor is responsible for providing all necessary labor, materials, and tooling, with a specific prohibition on the use of MIL-W-81381 wire in favor of SAE-AS22759 series wire. The initial induction period is 365 calendar days from the award date, with a potential government extension of up to 730 additional days. Proposals should include firm-fixed or TT&E pricing, including option pricing for up to two additional units over the contract period. The contract establishes strict guidelines for Repair Turnaround Time (RTAT) and requires accurate transaction reporting via the Commercial Asset Visibility (CAV) system. Specific protocols are defined for items determined to be Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR), all of which require written concurrence from DCMA and the Procuring Contracting Officer. Quality standards must adhere to ISO 9001/SAE AS9100 and ANSI/NCSL Z540.3 for calibration. The designated repair location is identified as Sikorsky Aircraft Corporation in Stratford, Connecticut.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 335312
New
Federal
BRAKE,ELECTRIC
Solicitation # SPRPA125QET26
This contract pertains to the procurement of electric brake systems under solicitation number SPRPA125QET26, issued by the Defense Logistics Agency's Philadelphia office. The contract emphasizes compliance with various regulations, including item identification and valuation, inspection of supplies, and value engineering, with specific provisions for warranty coverage of non-complex supplies for 12 months. It incorporates multiple trade and procurement standards such as Buy American, Free Trade Agreements, and Balance of Payments programs, with certifications and representations due annually or as specified. The solicitation, posted on November 14, 2025, has a response deadline of November 28, 2025, and is issued under emergency acquisition flexibilities due to urgency, waiving the usual synopsis requirement. Offerors must be approved sources, and distributors must submit authorization documentation to be eligible. The contract is designated as non-critical, and the primary point of contact for questions and submissions is Thomas Kuhnle via email. The procurement aims to ensure timely delivery of electric brake systems while adhering to strict regulatory and quality standards.
Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332439
New
Federal
81--CONTAINER,SHIPPING
Solicitation # SPRPA126RVC30
This solicitation is for the procurement of aluminum shipping containers, specifically part number 20140, to be manufactured according to Champion Company drawings. The contract is being extended to October 13, 2026, to promote competition. Key technical requirements include the use of specific weld fillers for 6061 and 5000 series aluminum, adherence to AWS welding standards, and the application of an electrodeposited alkaline Zinc-Nickel Alloy finish. Each container must feature a Unique Identification marking on a nameplate and include a specific amount of desiccant based on interior volume. A critical component of this contract is the First Article Testing (FAT) process, which includes dimensional inspections, a form and fit check with a T408-GE-400 engine, and a rigorous 18-inch free-fall drop test followed by pneumatic leak testing. New manufacturers may be subject to pre-award surveys and post-award conferences. While the government estimates first article testing costs at 12,000 dollars, all costs associated with the submission and shipment of FAT samples are the responsibility of the contractor. The contract also specifies strict chemical deoxidizing and mechanical cleaning procedures to be performed immediately prior to welding.
Other Metal Container Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC10
This contract, solicitation number SPRPA126RVC10, specifies requirements for the manufacturing and delivery of shipping and storage containers under the Department of Defense, managed by the Defense Logistics Agency Aviation at Philadelphia. The containers must be produced in strict compliance with drawing number 875E001, Revision LATEST, and associated sub-drawings, using aluminum shell material and adhering to precise welding standards including AWS D1.1, D1.2, and MIL-W-22248 Class 4. Critical processes such as cleaning, deoxidizing, and filler material selection are tightly controlled, with specific prohibitions on sodium hydroxide and iron-containing abrasives. All units require a Unique Identification (UID) marking in Data Matrix format per MIL-STD-130, with serial numbers formatted as contract#_no_dashes-000X, sourced through NAVICP. Each container must undergo a 100% production leak test using the pneumatic-pressure method per Federal Test Method Standard 101C, where pressure loss exceeding 25% of stabilized pressure over 30 minutes results in rejection, along with a mandatory 18-inch free-fall drop test to validate structural integrity. A First Article Test is mandatory unless waived for prior approved suppliers who can prove identical production within the last three years using the same facilities and processes, with double pricing required for waiver eligibility. The contractor must bear all costs related to First Article submission, testing logistics, and corrective actions, including potential re-submissions. A pre-award survey and post-award conference may be required for new manufacturers, and all work must conform to stringent quality controls, material certifications, and process documentation. Packaging must meet MIL-STD-2073, and compliance with Buy American, Equal Opportunity, Security Prohibitions, and other federal clauses is enforced, with delivery due within 120 calendar days of contract award and response deadline set for July 30, 2026.
Other Metal Container Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--PUMP,WINDOW WASHER
Solicitation # SPRPA126QUB47
This solicitation, issued by the Department of Defense via DLA Aviation in Philadelphia, is for the procurement of window washer pumps under solicitation number SPRPA126QUB47. The closing date for responses is September 30, 2026. This requirement is issued under EAF authority and is specifically for non-CLSSA Foreign Military Sales, meaning the assets will be owned by customer countries rather than the U.S. Government. Consequently, standard Item Unique Identification and Valuation requirements are waived. Eligible suppliers must be government-approved sources providing newly manufactured spares; refurbished or repaired materials are strictly prohibited. All parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Quality requirements include adherence to AS/EN/JISQ 9100 or an equivalent standard. Authorized distributors must provide a formal distributor letter on the source's letterhead at the time of proposal submission to be considered technically acceptable.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 19 days
View Details
NAICS: 336413
New
Federal
15--DOOR,ACCESS,AIRCRAF
Solicitation # SPRPA126QUC06
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two aircraft access doors under contract NSN 7R-1560-017005796-P8. The acquisition is conducted as a commercial item procurement under FAR Part 12, requiring that all components be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the items must meet all government form, fit, and function requirements. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, a standard commercial warranty, and full supply chain traceability. IUID is not required for these items as they are captured under the parent end item in the DoD registry.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
16--ECU,AIRCRAFT,MATERI
Solicitation # SPRPA126RWA44
This contract solicitation, issued by the Department of Defense under the Office of DLA Aviation in Philadelphia, seeks bids for an Aircraft ECU, Material, identified as a Critical Safety Item, with the solicitation number SPRPA126RWA44. The offer deadline is tightly constrained, with submissions due on May 4, 2026, by 6:00 PM, and proposals must be submitted electronically via email as required. The North American Industry Classification System code 336413 indicates the procurement is for aircraft parts and equipment, and the item falls under the Critical Safety Item category, triggering the incorporation of DFARS clause 252.209-7010 and mandatory compliance with specific quality and certification standards. The contract includes stringent requirements such as compliance with AS/EN/JISQ 9100 or equivalent quality management systems, warranty provisions of 12 months with a 45-day defect discovery window, and adherence to Buy American Act provisions and Free Trade Agreements under applicable certificates. The contract mandates the use of Workflow Pro Assist Module and Wide Area Workflow Payment Instructions with combined Invoice and Receiving Report processing, ensuring streamlined financial and operational integration. Small business subcontracting is required under two separate but related clauses, and equal opportunity provisions for veterans and workers with disabilities are enforced. The contractor must provide certified cost or pricing data when applicable, disclose royalty information, comply with Cost Accounting Standards, and certify recovered material content for EPA-designated products. A stop-work order provision, limitation of liability for high-value items, and security prohibitions tied to a February 2026 deviation further shape contractual obligations. Procurement Note E05 and the Contractor Business Systems clause are incorporated by reference, and the offeror is restricted to submitting only one proposal. All performance and delivery obligations are subject to national defense priorities, and the place of performance remains unspecified, though the contracting office is located in Philadelphia, Pennsylvania.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 3 hours
View Details
NAICS: 336413
New
Federal
16--FIRE CONTROL PANEL
Solicitation # SPRPA126QUC04
This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of two aircraft fire control panels under NSN 7R-1680-016679280-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition is governed by FAR Part 12 and applicable DFARS regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, including technical specifications and sales history, and ensure the components meet all form, fit, and function requirements. A standard commercial warranty covering workmanship and replacement parts is required.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
66--TRANSDUCER,MOTIONAL
Solicitation # SPRPA126QUB95
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new motional transducers under contract NSN 7R-6695-015731832-P8. The items are classified as commercial products and must be newly manufactured; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition follows FAR Part 12 and DFARS 212 regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter on the source's letterhead. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must also provide documentation supporting the item's commerciality, a standard commercial warranty, and technical specifications ensuring the components meet the required form, fit, and function.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--TAXI,NOSE GEAR,AIR
Solicitation # SPRPA126QUC02
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new nose gear taxi aircraft components under NSN 7R-1680-015885785-P8. The acquisition is conducted as a commercial item procurement in accordance with FAR Part 12 and DFARS 212, requiring that all provided components be newly manufactured spares. Refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. Suppliers must be government-approved sources of supply and provide an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and conformity to design data. Offerors are required to submit documentation supporting the commerciality of the items, such as sales history or price lists, and must provide full traceability from the original manufacturer. Delivery is specified as FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
48--VALVE,CROSS
Solicitation # SPRPA126QUC03
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of nine aircraft cross valves under NSN 7R-4810-016016223-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and all components must meet the government's form, fit, and function requirements. A critical requirement for this contract is the provision of an FAA Form 8130-3 Authorized Release Certificate to ensure airworthiness and traceability from the original manufacturer. Offerors must provide documentation supporting the commerciality of the items and must be government-approved sources of supply or provide an authorized distributor letter. The acquisition is conducted under FAR Part 12 and EAF Authority, requiring a standard commercial warranty and adherence to specific packaging and labeling standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC35
This solicitation, issued by DLA Aviation at Philadelphia, seeks the procurement of an aluminum outer shell container and an Inner Frame Adapter Assembly for the T-56 QECA engine. The contract is extended to October 13, 2026, to promote competition and is designated as a total small business set-aside. Manufacturing must adhere to specific Container Research Corporation drawings and AWS welding standards, with a strict requirement for engineering source approval for new manufacturers. Key technical specifications include the use of electrodeposited alkaline Zinc-Nickel Alloy finishing and the installation of specific desiccant and shock mounts. Quality assurance is a critical component of this contract, requiring 100% production leak testing and a rigorous First Article Testing (FAT) process. The FAT includes dimensional inspections, an 18-inch free-fall drop test, and form and fit verification. Contractors must provide a first article sample within 160 calendar days of the contract date to designated facilities in New Jersey. All items must feature Unique Identification (UID) markings and comply with Buy American and Free Trade Agreement certifications.
Other Metal Container Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS