Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Silver Refining and Reutilization Processing

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves processing up to 910,481 troy ounces of silver-bearing battery materials annually, with the goal of refining the recovered silver to a minimum purity of 99.9%. All operations must ensure secure storage of materials throughout the refining process and adhere to strict compliance standards for the disposal of waste byproducts. The work is to be performed at a designated facility in Keyport, Washington, with a response deadline of October 2, 2026, and the opportunity was posted on August 6, 2026. This is a subcontract under the Naval Undersea Warfare Center, part of the Department of Defense, and falls under NAICS code 331420 for metal refining and recycling. The contract does not specify set-aside status or point of contact details, and all submissions must be made through the designated SAM.gov portal.

General Info

Process up to 910,481 troy ounces of silver-bearing battery materials to 99.9% purity at Keyport, Washington by October 2, 2026.

Agency

Department Of Defense → Naval Undersea Warfare CenterView Agency

NAICS

331420 - Copper Rolling, Drawing, Extruding, and AlloyingView NAICS

Place of Performance

Keyport, WA, 98345, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Undersea Warfare Center
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Naval Undersea Warfare Center
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Process up to 910,481 troy ounces annually of silver-bearing battery materials, refining recovered silver to 99.9% purity, with secure storage and compliant waste disposal.

Similar Contracts

Same NAICS industry code

NAICS: 331420
New
DIBBS
TUBE SUPPORT ASSY
Solicitation # SPE4A5-26-T-333F
The contract pertains to the procurement of a Tube Support Assembly, identified by part number 901-080-136-159 and NSN 4710-01-471-8843, with a total quantity of 12 units required under solicitation SPE4A5-26-T-333F. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951, and must be complied with in full. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization conforming to RP001, while all items must be labeled and marked per RQ017, though Item Unique Identification is not required as specified by the customer under DFARS 252.211-7003. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes must be verified at specified levels. The delivery is FOB origin with a 170-day lead time, inspection and acceptance occurring at the destination, and no quantity variance is permitted. Delivery must be directed to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with a required ship date of January 31, 2027, and an original delivery deadline of May 5, 2027. Transportation logistics must follow DLAD Proc Notes C19 and C20. The contract references specific quality assurance provisions including RQ001 for tailored higher-level requirements applicable to both manufacturers and non-manufacturers, and RQ011 for the removal of government identification from nonaccepted supplies. Measuring and test equipment used in production must comply with RT001. The unit of issue is each (EA), and pricing details are specified in the contract line item, with all documentation, markings, and packaging strictly aligned with DoD and DLA directives. The primary point of contact for inquiries is Kayla Minor at the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
TUBE AND FITTINGS, META
Solicitation # SPE4A5-26-T-332C
The contract covers the procurement of metallic tubes and fittings with part number 70311-22806-116 under solicitation SPE4A5-26-T-332C, supplied to meet strict technical and quality standards governed by the DLA Master List of Technical and Quality Requirements. Compliance with specific DLA directives is mandatory, including RQ018 for contractor retention of supply chain traceability documentation as outlined in DLAD Procurement Note C03 from August 2016, though Item Unique Identification is not required per the service customer’s request. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances expected unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The item is designated as a critical application component for Sikorsky Aircraft Corporation, requiring adherence to referenced technical data packages and drawings dated May 30, 2020. Delivery is required FOB origin within 170 days, with a final ship date of January 31, 2027, and original delivery due by July 19, 2027. Quantity is fixed at 10 units with no variance allowed. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements (RP001). All DLA technical requirements supersede ASTM standards. Final delivery is to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with transportation logistics governed by DLAD Procurement Notes C19 and C20. The NSN is 4710-01-521-1433 and the unit of issue is each (EA), with a total contract value based on a unit price of $10.000. All documentation and compliance are governed by the DLA procurement framework, with primary point of contact Sean Moore available for inquiries.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
WIRE, NONELECTRICAL
Solicitation # SPE8E4-26-T-2023
This contract specifies the procurement of 25 coils of nonelectrical wire made from copper alloy 270, round in shape, with a diameter of 0.064 inches and a total length of 8,468 feet per coil, delivered in whole-foot lengths only. The material must comply with technical specifications referenced in the DLA Master List of Technical and Quality Requirements, including ASTM B134/B134M-15, MIL-STD-129R, SAE AMS-STD-185A, ASTM B900-16, and ASTM B250/B250M-16. Each coil must be clearly labeled with adhesive labels on both sides, and continuous identification markings are mandated on every unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, stable, and applied via stenciling or stamping without contaminating the product. Certificates of Quality Compliance, including mill-material certification, are required with every shipment and must be submitted to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods conforming to ASTM B900 and marking per MIL-STD-129. Shipment markings must reflect both units of measure when applicable, and palletization must follow RP001 guidelines. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement must be explicitly declared. The Government waives source inspection requirements for QSLD-compliant suppliers, relieving them from certain quality conformance inspections such as COQC and QAP-EQ003. The contract includes a strict zero variance in quantity, with delivery scheduled 69 days from award, FOB origin, and inspection and acceptance at destination. The material must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, by the original required delivery date of December 13, 2026. The solicitation is a total small business set-aside under NAICS code 331420, and all technical and quality references are controlled by the revision of the DLA Master List in effect on the solicitation issue date. Failure to meet any marking, certification, packaging, or
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-251F
This contract specifies the procurement of 8,500 feet of electrical wire under NSN 6145014746750 and part number M22759/92-16-6, compliant with SAE AS22759E Revision E dated July 1, 2024, and referenced in solicitation SPE7M1-26-T-251F. The wire must be supplied in continuous length as determined by the advice code, with packaging conforming to ASTM D3951 and labeling per MIL-STD-129, while adhering strictly to DLA’s Master List of Technical and Quality Requirements which override all other standards. The item is designated as a Critical Application Item and is subject to a Qualified Products List or Qualified Manufacturers List requirement, meaning only approved sources may supply it. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval regardless of specification allowances. Delivery is required FOB origin within 127 days, with a target ship date of December 23, 2026, and an original delivery deadline of January 7, 2027. Quantity tolerance allows for a plus or minus 5 percent variance, with inspection and acceptance occurring at the destination. Packaging must be unitized in 500-foot spools per the Contract Quantity per Unit Pack (QUP), and palletization must follow DLA Packaging Requirements. The consignee is DLA Distribution Warner Robins at Robins AFB, Georgia, with transportation governed by DLAD Proc Notes C19 and C20. The contract is awarded under a federal solicitation with NAICS code 331420, and all units of issue must align with the DoD’s authorized unit and ANSI X12 standards. Any changes to configuration, deviations, or waivers must be processed through formal Engineering Change Proposal or Variance request procedures.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-304T
The contract is for the procurement of 25 units of a metal tube assembly identified by NSN 4710-01-606-5187 under solicitation SPE7M4-26-T-304T, with a delivery deadline of 231 days after award. The requirement is governed by a comprehensive set of technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation issue or award date depending on acquisition size. The item is defined in part by Army drawings which specify a paint finishing requirement; however, DCSC Drawing 16236 CS-2300-0001 must be used in lieu of those finish specifications, as it includes mandated Chemical Agent Resistant Coating (CARC) and high-temperature coating standards. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by the specification. The contract mandates strict compliance with component qualification standards, requiring all applicable parts to be sourced from QPL or QML-approved manufacturers per procurement note H02. Inspections and acceptance must occur at the origin, and configuration changes require formal Engineering Change Proposal requests for any variance or deviation. Cybersecurity compliance is enforced through CMMC Level 2 certification by an accredited third-party assessor. Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring recipients to hold JCP certification, complete mandatory DOD export control training, and receive formal approval from DLA to access the data. Full and open competition applies, with responses due by August 17, 2026, and primary point of contact is Rory O'Reilly of the DLA Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-321D
This contract pertains to the procurement of three metal tube assemblies identified by NSN 0001S00000053, issued under solicitation SPE4A5-26-T-321D by the Defense Logistics Agency. Delivery is required within 172 days after delivery order issuance, with performance set at Cherry Point, North Carolina. The supply is subject to a suite of technical and quality requirements referenced from the DLA Master List, including packaging standards, inspection and acceptance at origin, and specific markings for physical identification. Although Item Unique Identification is not mandated, the requirement to remove government identification from non-accepted supplies applies. Export control restrictions are strictly enforced, as the technical data associated with this item is governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to such data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. The contract includes stringent compliance obligations under DFARS clauses and is restricted to contractors meeting all DLA export data handling criteria. The solicitation closed August 12, 2026, with key points of contact listed under the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 331420
New
DIBBS
PIPE ASSEMBLY, METAL
Solicitation # SPE4A5-26-T-330N
The contract is for the procurement of a metal pipe assembly with part number 23036351 and NSN 4710-01-329-6442, with a quantity of three units to be delivered FOB origin within 171 days, with no variance allowed in quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Configuration changes require an Engineering Change Proposal or variance request, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per customer instruction, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Materials must be manufactured in accordance with the latest drawing revision J. The product must be packaged to MIL-STD-2073-1E with marking compliant to MIL-STD-129, no special marking, and palletized per DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in packaging and preservation. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and physical identification of the bare item must be marked per RQ017. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract was solicited under SPE4A5-26-T-330N, with a response deadline in August 2026 and a required delivery date of December 5, 2027, though the need ship date is January 31, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → Naval Undersea Warfare Center

Same awarding agency

NAICS: 331492
New
Federal
Silver Reutilization and Account Maintenance Service
Solicitation # N0025327Q0001
The Naval Undersea Warfare Center Division in Keyport, Washington, plans to issue a Request for Quote for Silver Reutilization and Account Maintenance Services to support the production of new batteries requiring silver of 99.9% purity, with annual requirements of 328,060 troy ounces of high silver content material, 582,421 troy ounces of low silver content material, and 439,108 troy ounces for account maintenance, along with nine transaction fees. The solicitation will be conducted as a full and open competition under FAR Subpart 12.201 using the Lowest Price Technically Acceptable source selection method, resulting in a single Indefinite-Delivery Indefinite-Quantity contract with a five-year ordering period and a Fixed-Price with Economic Price Adjustment-Cost Index structure. The requirement falls under PSC P999 and NAICS code 331492, with a small business size standard of 850 employees, and the contract will be awarded using the Procurement Integrated Enterprise Environment where vendors must have active SAM registration, a valid CAGE Code, Digital PIN, One-time Password, and Proposal Manager role access to submit offers. The Request for Quote is scheduled for release on or about October 1, 2026, with responses due approximately 30 days later, and pre-solicitation materials including draft statements of work and economic price adjustment clauses are available for review. All interested parties must maintain current registration in the System for Award Management and adhere to the electronic submission requirements via the PIEE Solicitation Module. This notice serves solely as advance information and does not constitute a solicitation or invitation to submit proposals; however, it provides critical details for industry preparation, including the point of contact, Christina Schmitt, for inquiries, and the specific technical and administrative procedures governing participation. The place of performance is Keyport, Washington, and no set-aside provisions are applicable for this procurement.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 334511
New
Federal
Dual-Camera Monitoring System
Solicitation # RFISS-178
The Naval Undersea Warfare Center Division in Keyport, Washington is conducting market research through a sources sought notice for a dual-camera monitoring and positioning system, identified by requisition number RFISS-178. This is not a solicitation for proposals or a commitment to award a contract; rather, it is an information-gathering effort to assess industry capabilities and interest in meeting the agency’s needs as outlined in attached drawings and statements of work. Responses are entirely voluntary, and the government will not reimburse any costs incurred by respondents or provide feedback on submitted information. All submissions must be made via email to the specified point of contact, Ryan Huddleston, and are due by August 21, 2026, with respondents required to complete the attached "Questions for Industry" questionnaire. Strict operational security (OPSEC) protocols apply to all submissions, and contractors must comply with the guidelines detailed in the official OPSEC Guide for Contractors hosted on the Navy’s website. Responses must not include any classified, controlled unclassified, or arms export-controlled materials. All information provided becomes the property of the government and will not be treated as a formal bid or expression of interest for future contracting opportunities. Should a formal solicitation be issued, it will be announced separately through the Government-wide point of entry, and interested parties must respond to that official notice to be considered for award. Participation in this sources sought notice does not grant inclusion on any bidder list or guarantee receipt of future solicitations.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 541330
Federal
NUWC Division, Keyport and NSLC Mechanicsburg SeaPort/Service Contract Forecast
Solicitation # N00253-N65726-SeaPort
The contract forecast involves the Naval Undersea Warfare Center (NUWC) Division Keyport and the Naval Sea Logistics Center (NSLC) Mechanicsburg, leveraging the SeaPort-NxG government-wide acquisition contract vehicle to procure a broad range of professional services critical to undersea warfare and logistics operations. Services encompassed include Acoustic Trial and Range Sustainment, Engineering and Technical Support, Information Technology, Logistics and Technical Support, Infrastructure and Security Support, Business and Administrative Support, Industrial Support, and Corporate Communication, with performance primarily centered at Keyport, Washington, and Mechanicsburg, Pennsylvania, and extended to detachments in Florida, Hawaii, Guam, and Japan. The forecast outlines multiple existing task orders across these service areas, with expiration dates stretching from November 2025 through April 2029, and anticipated follow-on solicitation opportunities scheduled predominantly between fiscal years 2026 and 2028. All contracts utilize NAICS code 541330 for Engineering Services, and previous competitions have been structured as Small Business Set-Asides, including specific set-asides for Woman-Owned Small Businesses and Service-Disabled Veteran-Owned Small Businesses, requiring contractors to maintain verified socioeconomic certifications. While the contract vehicle is an Indefinite-Delivery, Indefinite-Quantity (IDIQ) structure, no detailed pricing, line-item costs, or payment instructions are provided, and no specific evaluation factors, contract clauses, or inspection criteria are detailed in the available documentation. Contract administration oversight is managed from Keyport, Washington, with David Walz listed as the primary point of contact, and while task order incumbents and contract numbers are identified, no comprehensive statement of work, delivery schedules, or performance standards are described, indicating this is a procurement planning document rather than a fully executed solicitation.
Engineering Services

POSTED

8 days ago

DEADLINE

N/A
View Details