Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Site Preparation and Grading

Active

State & Local

Response Deadline08/14/2026, 05:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Site Preparation and Grading involves clearing, grading, and soil compaction activities at locations where barrier walls will be installed, ensuring a stable foundation and precise alignment for construction. All work must meet engineering standards to support the structural integrity and long-term performance of the barrier systems. The solicitation is classified as a subcontract under NAICS code 237990 and is issued by the Kentucky Transportation Cabinet Division of Maintenance. Responses are due by August 14, 2026, at 5:30 PM, with the work scope centered on sites across Kentucky, specifically designated as Other for place of performance. No setaside provisions or organizational type restrictions are specified, and the solicitation is accessible via the Kentucky VSS online portal.

General Info

Site preparation and grading for barrier walls across Kentucky, due August 14, 2026, under NAICS 237990.

Agency

Kentucky → KYTC-Div of MaintenanceView Agency

NAICS

237990 - Other Heavy and Civil Engineering ConstructionView NAICS

Place of Performance

Other, KY, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:30:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyKentucky → KYTC-Div of Maintenance

ContactsNo contacts available

OfficeN/A

Organization / Agency

Kentucky → KYTC-Div of Maintenance

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Clearing, grading, and soil compaction at barrier wall installation sites to ensure stable foundation and proper alignment.

Similar Contracts

Same NAICS industry code

AIRFIELD 2028 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThe contract encompasses a broad range of airfield infrastructure improvements aimed at enhancing safety, efficiency, and regulatory compliance at the Port of Seattle’s airfield facilities. Key components include the replacement of airfield lighting circuits that exhibit low megger readings with new LED lighting fixtures and signs to improve visibility and reduce maintenance demands. Pavement and critical utility systems suffering from deterioration will be fully replaced to ensure structural integrity and operational reliability. Wildlife hazard management efforts involve removing turf edge dams along runways, taxiways, and access roads, installing anti-perching devices on airfield signage, and addressing ponding issues through regrading and the installation of comprehensive storm drainage infrastructure to minimize bird attraction and reduce runway contamination risks. Additionally, failing flush fire hydrant access hatches will be replaced to ensure unimpeded access for emergency response personnel. The contract is categorized under NAICS code 237990 and is part of the larger AIRFIELD 2028 ALL PROJECTS initiative, managed by the Aviation Project Management Group under the Port of Seattle, with Yanet Maldonado serving as the primary point of contact.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

AIRFIELD 2029 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThe contract involves comprehensive upgrades to airfield infrastructure at the Port of Seattle, focusing on modernizing lighting systems by replacing outdated circuits with low megger readings with new LED fixtures and signage for improved efficiency and reliability. It also includes the replacement of deteriorating airfield pavement and critical utilities to ensure structural integrity and operational safety. Wildlife hazard mitigation efforts will involve removing turf edge dams along runways, taxiways, and access roads, installing anti-perching devices on signage to deter birds, and addressing ponding issues through regrading and the installation of storm drainage systems. Additionally, failing flush fire hydrant access hatches will be replaced to maintain emergency response readiness. The project is forecasted under NAICS code 237990 and is managed by the Aviation Project Management Group of the Port of Seattle, with Yanet Maldonado listed as the primary point of contact for inquiries.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

AIRFIELD 2030 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThe contract encompasses a comprehensive modernization and safety enhancement initiative for the airfield infrastructure at the Port of Seattle, focusing on critical systems including lighting, pavement, utilities, wildlife hazard mitigation, and fire hydrant access. Key components include replacing aging airfield lighting circuits with low megger readings with new LED fixtures and signage to improve energy efficiency, reliability, and visibility for aircraft operations. The project also involves the removal and replacement of deteriorating pavement and essential underground utilities to maintain structural integrity and operational continuity. Wildlife hazard management is addressed through the elimination of turf edge dams along runways and taxiways, installation of anti-perching devices on airfield signs, and the regrading of areas prone to ponding alongside the addition of new storm drainage infrastructure to reduce bird attractants and water accumulation. Additionally, failing flush fire hydrant access hatches will be replaced to ensure rapid and unobstructed access for emergency response teams. All work is coordinated under the broader AIRFIELD 2030 initiative and falls under NAICS code 237990 for other heavy and civil engineering construction. The contract is managed by the Aviation Project Management Group, with primary point of contact Yanet Maldonado available for inquiries via phone and email.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Jack Block Park Pier ReplacementThe Northwest Seaport Alliance, through the Port of Seattle, is forecasting a project to demolish the aging and end-of-life pier at Jack Block Park and construct a new pier in its place, along with associated repairs to the pier plaza. This effort aims to modernize waterfront infrastructure, improve safety, and ensure long-term operational functionality at the site. The project is classified under NAICS code 237990, indicating it falls under other heavy and civil engineering construction, and is currently in the forecast stage with a posted date of July 25, 2026. No specific solicitation number or set-aside details are available at this time. Primary point of contact for inquiries is Yanet Maldonado, with Valerie Huffman serving as the project manager. All project activities will occur at Jack Block Park, though exact city and state location details are not specified in the provided data.

Northwest Seaport Alliance (NWSA)

POSTED

about 8 hours ago

DEADLINE

2027 Airfield Project - Contract 1The contract entails a comprehensive modernization of the airfield infrastructure at the Port of Seattle, focusing on critical safety and operational upgrades. Key components include replacing aging airfield lighting circuits that exhibit low megger readings with new LED lighting fixtures and signs to enhance visibility and energy efficiency. Parallel efforts involve the replacement of deteriorating pavement sections and essential utilities to ensure structural integrity and long-term reliability of airfield surfaces and underlying systems. Additional work centers on reducing wildlife hazards by removing turf edge dams along runways, taxiways, and access roads, installing anti-perching devices on airfield signage to deter birds, and addressing ponding issues through regrading and the installation of new storm drainage infrastructure. The project also includes replacing failing flush fire hydrant access hatches to maintain emergency response readiness. All work is coordinated under Contract 1 of the 2027 Airfield Project, managed by the Aviation Project Management Group, with primary contact information provided for Jay Kim and Project Manager Mengqi Wu.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

2027 Airfield Project - Contract 2The Port of Seattle’s Aviation Project Management Group is forecasting a major airfield infrastructure upgrade under Contract 2 for 2027, aimed at enhancing safety, efficiency, and compliance across airport operations. The project includes replacing aging airfield lighting circuits with low megger readings with new LED lighting fixtures and signs to improve visibility and reduce maintenance burdens. Simultaneously, deteriorating pavement and critical utility systems will be replaced to ensure structural integrity and operational reliability across runways, taxiways, and associated areas. Wildlife hazard mitigation efforts will focus on removing turf edge dams, installing anti-perching devices on airfield signs, and addressing ponding issues through regrading and the installation of modern storm drainage infrastructure to minimize bird and animal attraction near flight paths. Additionally, failing flush fire hydrant access hatches will be replaced to ensure unimpeded emergency access. The contract is classified under NAICS code 237990 and is managed by the Port of Seattle, with point of contact Moraa Omwega and Project Manager David Neds available for inquiries.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

T18 Lift Station ReplacementThe Port of Seattle through its Waterfront Project Management division is forecasting the complete replacement of the lift station located at the north lunchroom in Terminal 18. The project is classified under NAICS code 237990, indicating it falls under other heavy and civil engineering construction, and is intended to address infrastructure obsolescence or failure at this critical wastewater handling facility. The solicitation is posted with a date of July 25, 2026, and while no set-aside designation or formal solicitation number has been assigned yet, the project will be open for future bidding once正式启动. Angela Peterson serves as the primary point of contact for inquiries and can be reached at peterson.a@portseattle.org or 206-787-4813, with Crystal Cuellar designated as the project manager overseeing implementation. There is no specified location beyond the terminal identifier, and no additional administrative or geographic details are listed for the performance site. All further details regarding scope, timelines, and submission requirements will be released through the official solicitation portal.

Waterfront Project Management

POSTED

about 8 hours ago

DEADLINE

Həʔapus Park Redevelopment - ConstructionThe Həʔapus Park Redevelopment project, managed by the Port of Seattle through its Waterfront Project Management office, encompasses a comprehensive upgrade to enhance public accessibility, environmental stewardship, and visitor experience. Key improvements include the construction of new restrooms, upgraded pathways with enhanced lighting, a boot washing station to reduce invasive species, dedicated dog-friendly amenities, and informative wayfinding and interpretive signage to educate visitors about the site’s cultural and ecological significance. A hand-carry boat launch will be added to support low-impact water access, while all work will be carefully phased to comply with environmental permitting requirements, particularly regarding in-water activities. The project timeline is structured to avoid disruption to tribal fisheries, with substantial completion targeted for the second quarter of 2028. Work will involve both upland and in-water construction activities, necessitating precise scheduling to meet regulatory constraints and honor seasonal ecological considerations. The Port of Seattle is the leading agency, with Angela Peterson serving as the primary point of contact and Julie Yun as the project manager. The initiative falls under NAICS code 237990, indicating it as a miscellaneous construction project related to public works. Although no formal solicitation number has been issued yet, the forecast was posted in July 2026, signaling the upcoming procurement phase. The project reflects a commitment to sustainable development, community engagement, and cultural respect, aligning with broader regional goals for equitable and environmentally responsible park infrastructure.

Waterfront Project Management

POSTED

about 8 hours ago

DEADLINE

Civil Site Work and EarthmovingThe contract titled Civil Site Work and Earthmoving is a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete for award. It involves comprehensive civil site preparation activities including grading, excavation, trenching, and earthwork essential to the construction and maintenance of civil infrastructure such as levees, flood control systems, and navigation structures. The NAICS code 237990 classifies this as other heavy and civil engineering construction, indicating the scope is focused on large-scale public works rather than typical building construction. The work is to be performed in Portland, Oregon, with a ZIP code of 97204, and the contracting agency is the Department of Defense under the office identifier W071 Endist Portland. The solicitation was posted on July 25, 2026, and responses are due by August 5, 2026, at 10:00 PM Eastern Time, providing a window of approximately eleven days for interested parties to submit proposals. All work must be executed by a certified small business as defined by the Small Business Administration under FAR 19.5 regulations.

W071 Endist Portland

POSTED

about 12 hours ago

DEADLINE

USACE NWD DESIGN BUILD/DESIGN BID BUILD REGIONAL MATOCThe U.S. Army Corps of Engineers, Northwestern Division, Portland District, is issuing a competitive, firm-fixed price, indefinite delivery indefinite quantity Multiple Award Task Order Contract for design-build and design-bid-build construction services across the Portland, Seattle, and Walla Walla Districts. This five-year contract, covering fiscal years 2027 through 2032, has an estimated total capacity of $99 million and is structured as a total small business set-aside under FAR 19.5, with the NAICS code 237990 and a $45 million size standard. The scope includes civil, structural, architectural, electrical, and mechanical work such as site utilities, drainage, paving, concrete and steel structures, roofing, elevators, power distribution, generators, lighting, SCADA/PLC systems, HVAC, plumbing, fire protection, and industrial equipment like pumps and compressors, primarily for flood control, hydropower, navigation, and recreational infrastructure. The solicitation will follow a two-phase evaluation process: Phase One will assess qualification packages to select up to ten firms, and Phase Two will involve full proposals submitted in response to a seed task order valued between $5 million and $10 million, with price and non-price factors evaluated as approximately equal in weight to determine best overall value. No discussions are intended, but the government reserves the right to conduct them if necessary. All offerors must be registered in SAM.gov prior to submission, and proposals must be submitted electronically through the SAM portal; responses to this presolicitation notice are not accepted. The solicitation is anticipated for release in mid-August 2026, with proposals due approximately 45 days later, and Phase Two offerors will have a minimum of 30 days to respond after the amendment is issued. Only small businesses, including those certified as 8(a), WOSB, SDVOSB, or HUBZone, are eligible, with 26 of 28 respondents in the market research phase qualifying as small businesses. Work will be performed throughout Southwest Washington and Oregon, with potential task orders extending to the Seattle and Walla Walla Districts, and no options beyond the five-year base period are included.

W071 Endist Portland

POSTED

about 12 hours ago

DEADLINE

PEIG-TIE Provicncial Correctional Centre- Site ModificationsThe Government of Prince Edward Island, through its Transportation, Infrastructure and Energy department, is soliciting bids for site modifications at the Provincial Correctional Centre located in Charlottetown, Queens County. The tender, identified as 2290-26045, was posted on July 25th, 2026, with submissions due by 2:00 PM local time on Thursday, August 13th, 2026. All bids must be submitted in clearly marked, sealed envelopes delivered to the Security Desk at the main entrance of the Jones Building, 11 Kent Street, Charlottetown, PEI C1A 7N8. Tender documents are only accessible electronically via the Prince Edward Island government website, and no paper copies will be provided. Bidders are invited to attend the tender opening, which will occur at the stated time and location, though the lowest bid will not necessarily be accepted. For inquiries, Jonathan Gauthier, the Contracting Authority, can be reached at 902-368-5128 or jwgauthier@gov.pe.ca. The project falls under the broader category of government infrastructure work, and while the specific NAICS code is not provided, it is associated with the Government of Prince Edward Island as the procuring entity.

Gov of PEI - Transportation, Infrastructure and Energy

POSTED

about 19 hours ago

DEADLINE

Separate sealed bids for the Greenville Port Commission Project No. PMM-25(006) will be received by the Greenville Port Terminal, 2701 Harbor Front Road, Greenville, MS, 38701 until 9:00 am (CST), August 19, 2026 and then at said office publicly openeSealed bids are being solicited for Project No. PMM-25(006) by the Greenville Port Commission, with submissions due no later than 9:00 a.m. CST on August 19, 2026, at the Greenville Port Terminal located at 2701 Harbor Front Road, Greenville, Mississippi. Bids will be publicly opened at the same location immediately after the deadline. The solicitation was posted on July 24, 2026, and is managed by the Mississippi Port Terminal Authority Program under the State of Mississippi. The project is classified as a state-level procurement and is not set aside for any specific small business category. The official solicitation can be viewed online through the Mississippi Department of Finance and Administration’s contract bid search portal.

POSTED

DEADLINE

More opportunities from Kentucky → KYTC-Div of Maintenance

Same awarding agency

Site Preparation and GroundworkThe contract titled Site Preparation and Groundwork outlines the scope of work for clearing, grading, trenching, and soil stabilization at locations where anchored barrier systems will be installed. This includes minor excavation and compaction activities necessary to ensure structural support and long-term stability of the barrier walls. The work is critical to preparing the ground for safe and effective installation of highway safety barriers and must meet engineering specifications for load-bearing capacity and erosion control. All tasks are to be performed in accordance with applicable state and federal standards for roadway construction and environmental mitigation. This is a subcontract under the Kentucky Transportation Cabinet Division of Maintenance, with a NAICS code of 238910 indicating it is classified under Other Heavy and Civil Engineering Construction. The solicitation was posted on July 24, 2026, and responses are due by August 14, 2026, at 5:30 PM Eastern Time. The place of performance is unspecified beyond being in Kentucky and may involve multiple locations across the state. There is no set-aside designation, and the contract is open to eligible subcontractors seeking to support public infrastructure projects under the KYTC’s maintenance and safety initiatives.

Site Preparation Contractors

POSTED

DEADLINE

Traffic Control and Signage for Installation ZonesThe contract involves the provision of comprehensive temporary traffic control services during the installation of barrier walls across various locations in Kentucky. Services include deploying and managing signage, cones, arrow boards, and flagging personnel to ensure safe and efficient movement of traffic through active work zones. All traffic control measures must comply with state and federal standards and require close coordination with the Kentucky Transportation Cabinet Division of Maintenance to schedule and execute lane closures without disrupting statewide travel. The work is expected to occur at multiple unspecified sites under the place of performance designation “Other,” with execution likely spanning rural and urban roadways under KYTC supervision. This subcontract, classified under NAICS code 238990 for other heavy and civil engineering construction, is open for responses until August 14, 2026, with proposals due by 5:30 PM Eastern Time. While no set-aside provisions or specific organization type requirements are detailed, the solicitation is issued by the Kentucky Transportation Cabinet and requires contractors to demonstrate experience in highway safety compliance and real-time traffic management. Interested parties must submit their proposals through the KYTC’s online portal at the provided URL, ensuring alignment with all operational, safety, and scheduling protocols defined by the state agency to maintain public safety and project timelines.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Polypropylene Barrier Wall Supply / ManufacturingThe contract solicits the supply and manufacturing of prefabricated polypropylene barrier wall units that must fully comply with Kentucky Transportation Cabinet performance and durability standards. The scope encompasses all aspects of production including raw material sourcing, molding, quality assurance testing, secure packaging, and timely delivery to designated project sites across Kentucky. All units must meet rigorous specifications to ensure structural integrity, weather resistance, and long-term functional performance under state transportation conditions. The contract is classified as a subcontract with a NAICS code of 326199, indicating it falls under other plastic product manufacturing. It was posted on July 24, 2026, with a response deadline of August 14, 2026, at 5:30 PM Eastern Time. Performance is expected to occur statewide, with no specific city designated, and the contracting authority is the Kentucky Transportation Cabinet Division of Maintenance. Bidders must be prepared to fulfill all technical, logistical, and quality control requirements without reliance on external documentation beyond the stated specifications.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Polypropylene Barrier Wall InstallationThe contract calls for the installation of prefabricated polypropylene modular barrier wall systems along state highways within KYTC Districts D11 and D12, encompassing all phases of work including site preparation, anchoring, precise alignment, and full compliance with Kentucky transportation safety regulations. The work requires adherence to state-mandated standards to ensure structural integrity, durability, and long-term performance under high-traffic and environmental conditions. All systems must be installed according to engineered specifications to maintain highway safety and minimize maintenance needs over time. The solicitation is classified as a subcontract with a response deadline of August 14, 2026, and was posted on July 24, 2026. The NAICS code 237310 reflects its classification under Highway, Street, and Bridge Construction, indicating the project is part of broader infrastructure improvement efforts. Performance will occur across multiple locations within the designated districts, with no specific city designated for performance, suggesting scope spans rural and urban corridors under KYTC’s Division of Maintenance oversight. All interested parties must submit proposals through the official KYTC Advantage4 portal by the stated deadline.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Quality Inspection and Compliance TestingThe contract solicits third-party inspection services for installed barrier walls to ensure compliance with KYTC and DOT QA/QC standards, focusing on alignment, anchoring, and material integrity. Inspectors must verify that all barrier wall installations meet technical specifications and safety requirements as defined by state transportation quality assurance protocols, with findings documented and reported in accordance with established procedures. The work is non-exclusive to a specific location and may occur across multiple sites under the jurisdiction of the Kentucky Transportation Cabinet’s Division of Maintenance. The procurement is classified as a subcontract under NAICS code 541350, which pertains to engineering services, and is open for response until August 14, 2026, at 5:30 PM Eastern Time. The posting date was July 24, 2026, with performance expected to take place across Kentucky, identified broadly as "Other" in the place of performance field. There is no set aside classification provided, and no point of contact information is listed in the data. Interested parties must submit proposals through the official KYTC digital portal accessible via the provided URL.

Building Inspection Services

POSTED

DEADLINE

Transportation and Logistics for Barrier DeliveryThe contract involves the statewide transportation and just-in-time delivery of polypropylene barriers from the manufacturer to designated installation sites across all ten districts of Kentucky. The work requires reliable logistics coordination to ensure timely arrival of materials at project locations, supporting maintenance and infrastructure operations under the Kentucky Transportation Cabinet’s Division of Maintenance. The hauling services must meet strict scheduling demands to align with installation timelines and minimize site downtime. Performance of this subcontract is governed under NAICS code 484220, which classifies it as a specialized truck transportation service for freight. Bidders must respond by August 14, 2026, and the opportunity is open to qualified subcontractors without specific set-aside designations. All deliveries must be executed efficiently across the entire state, with no single central point of performance, indicating that operations will span multiple locations simultaneously. Interested parties must access the official portal through the provided link to submit proposals and comply with all contractual requirements tied to safety, scheduling, and material handling standards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Polypropylene Barrier Supply / Material ManufacturingThe contract entails the manufacture and supply of pre-fabricated polypropylene barrier units that must comply with Kentucky Transportation Cabinet specifications for durability, UV resistance, and an interlocking design to ensure secure installation and long-term performance under harsh environmental conditions. These units are intended for use in transportation infrastructure applications and must meet strict quality benchmarks to withstand outdoor exposure, heavy usage, and mechanical stress without degradation or failure. The materials and construction methods must consistently align with KYTC standards for safety and reliability in roadway and construction zone applications. The solicitation is classified as a subcontract with a response deadline of August 14, 2026, and was posted on July 24, 2026, under NAICS code 326199 for other plastic product manufacturing. Performance is expected to occur across Kentucky, with no specific city designated as the place of performance, indicating work may be distributed state-wide or delivered to multiple locations. The contracting entity is the Kentucky Transportation Cabinet Division of Maintenance, and all proposals must be submitted through the provided state portal by the deadline to be considered for award. There is no set-aside designation indicated, meaning the opportunity is open to all eligible suppliers regardless of business size or ownership.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Polypropylene Barrier Wall InstallationThe contract involves the installation of polypropylene barrier walls along highways within all ten districts of the Kentucky Transportation Cabinet’s Division of Maintenance, requiring comprehensive site preparation, precise alignment, and secure anchoring to comply with state safety regulations. Work must be performed across a broad geographic area, with no specific city designated for performance, indicating the scope spans multiple locations throughout the state. The materials and methods must meet stringent engineering and safety standards to ensure durability and effectiveness in high-traffic environments. Subcontractors are required to submit responses by August 14, 2026, at 5:30 PM Eastern Time, following a posting date of July 24, 2026. The NAICS code 238990 categorizes this as other heavy and civil engineering construction, signaling its technical and logistical complexity. The contract is classified as a subcontract, suggesting the prime contractor will manage the overall project, while this opportunity is for firms to support execution. All work must align with Kentucky’s transportation infrastructure requirements, and interested parties can access additional details through the provided online portal.

All Other Specialty Trade Contractors

POSTED

DEADLINE

RFB-605-2700000040-1 | Polypropylene Barrier Wall Construction Districts 1-10 ID/IQThe Kentucky Transportation Cabinet, Division of Maintenance, has issued an indefinite-delivery/indefinite-quantity (ID/IQ) solicitation for polypropylene barrier wall construction across all 10 transportation districts in the state. This solicitation, designated RFB-605-2700000040-1, was posted on July 24, 2026, with responses due by August 14, 2026, and is administered exclusively through the Kentucky Vendor Self Service (VSS) electronic portal. The contract scope encompasses the construction of polypropylene barrier walls at unspecified locations throughout Kentucky, with performance and delivery expected across the entire state, as indicated by the placeholder “Other” for city and state in the place of performance. The solicitation does not include detailed technical specifications, drawings, or performance standards within the provided materials, and bidders are directed to consult supplementary attachments and the VSS submission portal for complete requirements. Pricing and cost details are absent from the available data, with no contract line item numbers, unit prices, estimated value, or option quantities listed, suggesting that cost submissions will be formatted per the VSS system’s structured input fields. Evaluation of proposals will be conducted using a trade-off methodology based on both cost and non-cost factors, though specific criteria, weights, and scoring thresholds are not disclosed and must be referenced within the checklist and scoring documents uploaded through the portal. Contractors are required to submit electronic responses through VSS, with a maximum of 10 files allowed per submission, each capped at 65 MB, and supporting documentation—including technical and cost proposals—must be uploaded in the designated steps of the online process. No physical delivery, packaging, marking, or preservation requirements are specified, as the contract involves on-site construction rather than shipment of goods. All representations, certifications, and socioeconomic status disclosures are completed electronically through VSS forms during the submission process, with mandatory compliance validation checks prior to final submission. The contracting authority will oversee inspection and final acceptance of deliverables at project sites across the state, with formal acceptance recorded electronically within the VSS system. There is no mention of a specific contracting officer, technical representative, or payment office within the provided information, but general procurement support is available through the Kentucky Finance Customer Resource Center. The absence of detailed FAR clauses, special requirements, or attachment lists in the document set indicates that the complete contract package is only accessible and executable through the official VSS portal.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

RFB-605-2700000041-1 | Polypropylene Barrier Wall Construction D11 & D12 ID/IQThe Kentucky Transportation Cabinet Division of Maintenance is soliciting qualified vendors through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the construction of polypropylene barrier walls designated under D11 and D12. The solicitation, identified as RFB-605-2700000041-1, was posted on July 24, 2026, with responses due by August 14, 2026, and is administered exclusively through the Kentucky Vendor Self Service (VSS) portal, where all submissions must be completed electronically. Work is to be performed at unspecified locations across Kentucky, with no detailed site addresses provided, and vendors must comply with technical specifications referenced through the VSS system, including potential adherence to ASTM or KYTC-mandated standards, though no specific standards are listed in the publicly available materials. The contract allows for up to ten attachments per submission, each not exceeding 65 MB in size, with acceptable formats including cost, technical, and proprietary documentation, though no explicit file type restrictions are stated. The evaluation process is not detailed in the available information, but vendors are required to complete a six-step submission workflow within VSS, including responding to scoring criteria and uploading supporting materials. The solicitation does not include pricing line items, contract value estimates, or detailed delivery schedules, and no specific payment methods, accounting codes, or invoicing systems are identified, though general inquiries should be routed through designated agency contacts. All offers must be submitted by registered VSS users, with no physical submissions permitted, and while representations and certifications are required of offerors, specific details regarding small business status, UEI/CAGE codes, or socioeconomic certifications are not disclosed in the publicly accessible content. The contract is structured as an IDIQ, implying the possibility of multiple awards and subsequent task orders over the life of the agreement, with the Kentucky Department of Maintenance retaining full control over performance locations, delivery timing, and acceptance procedures based on submitted technical compliance and scoring criteria.

Highway, Street, and Bridge Construction

POSTED

DEADLINE