Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Site Preparation, Grading & Seeding

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive site preparation, grading, and seeding services at both origin and destination locations, with full restoration of all disturbed areas following relocation activities. This includes earthwork to achieve proper topography, soil amendments as needed, and the establishment of vegetation through seeding to ensure ecological recovery and long-term stability. The work must meet specified standards for land reclamation and environmental compliance, ensuring the sites are returned to a condition consistent with or superior to their original state. All activities are to be executed in accordance with applicable regulations governing land disturbance and habitat restoration. This is a total small business set-aside subcontract classified under NAICS code 238320 for Land Subdivision, awarded by the Department of Defense through the W07V Endist St Paul office. Performance is required at a location with a zip code of 56549, though exact city and state are not specified. The contract was posted on June 26, 2026, and is available for review through the SAM.gov portal, with no designated point of contact listed. The set-aside designation restricts eligibility solely to small businesses as defined by the SBA, ensuring opportunities for qualified small firms to compete for this work.

General Info

Small business set-aside for site prep, grading, seeding, and full land restoration at 56549 under NAICS 238320.

Agency

Department Of Defense → W07V Endist St Paul

NAICS

238320 - Painting and Wall Covering Contractors

Place of Performance

MN, 56549

Set-Aside

SBA

Documents

This scope was carved out of W912ES26RA006.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Site Preparation and Intact 2-Story Historic Farmhouse Move - Hawley, MN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 26

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W07V Endist St Paul

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W07V Endist St Paul

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Grading, soil preparation, and seeding at both origin and destination sites, including full site restoration post-relocation.

Similar Contracts

Same NAICS industry code

Interior FinishesThis subcontract for Interior Finishes involves performing comprehensive interior build-out services for prime contractors on high school projects managed by the Ohio Facilities Construction Commission. The scope of work includes the installation of walls, ceilings, and floor coverings, specifically focusing on drywall hanging and finishing, acoustic ceiling tile installation, painting, and the placement of LVT and carpet. All work must be executed in accordance with OSDM standards to deliver fully finished interior spaces. The opportunity is categorized under NAICS code 238320 and was posted on October 2, 2026. Interested parties must submit their responses by the deadline of October 28, 2026, at 4:00 PM. Further details and application processes are managed through the OhioBuys portal.

Oh Facilities Construction Com

POSTED

about 18 hours ago

DEADLINE

Specialty Metallic PaintingThis subcontract for Specialty Metallic Painting involves providing and applying specialized metallic finishes for prime contractors working on Riverside Unified School District facility projects in Riverside, California. The scope of work focuses on high-visibility site elements, specifically the painting of marquees, flagpoles, and antenna poles. All work must be completed according to manufacturer specifications using Modern Masters Silver Opaque metallic paint and MasterClear UV Protective Clear Topcoat. The solicitation was posted on October 2, 2026, with a response deadline of October 22, 2026.

Riverside Unified School District

POSTED

about 18 hours ago

DEADLINE

Exterior Painting and Facility RefreshThis subcontract for the Riverside Unified School District involves providing full-service exterior painting and coating for facility projects in Riverside, California. The scope of work includes the cleaning and preparation of various surfaces, such as metal, brick, cement board, and concrete masonry, followed by the application of one primer coat and two finish coats. All work must adhere to MPI standards and Section 09 96 23, utilizing specific Dunn-Edwards Evershield and Aristoshield paints along with graffiti-resistant coatings. The project is categorized under NAICS code 238320 and is intended for prime contractors managing these facility refreshes. Interested parties must note that the response deadline is October 22, 2026. The ultimate goal of the contract is the delivery of fully painted exterior surfaces and refreshed facility assets.

Riverside Unified School District

POSTED

about 18 hours ago

DEADLINE

Exterior Painting At Jefferson And Sierra

Solicitation # 2026/27-07

Solicitation 2026/27-07 is a public works project issued by the Riverside Unified School District for the complete exterior repaint of Jefferson Elementary School and Sierra Middle School in Riverside, California. With a construction cost estimate of 600,000 dollars, the scope of work includes all labor, materials, and equipment for surface preparation, patching, priming, and painting of all designated building and site surfaces. The project requires the removal and replacement of wall-mounted signage and strict adherence to RUSD standards and VOC compliance regulations. Performance is anticipated to begin on December 19, 2026, with a contract duration of 120 days. The contract will be awarded to the lowest responsive and responsible bidder based on the total cash purchase price. Bidders must be registered with the DIR and comply with California Labor Code prevailing wage requirements. Mandatory submission requirements include bid security, a California Contractor's license, and certifications regarding a drug-free workplace, asbestos-free materials, and background checks. Awarded contractors must provide separate performance and payment bonds equal to 100 percent of the contract amount. Quality will be measured against an approved 36 by 36 inch mock-up, and the contractor must ensure a minimum of 65 percent of nonhazardous construction waste is recycled or salvaged.

Riverside Unified School District

POSTED

about 18 hours ago

DEADLINE

Exterior Painting At Emerson And Pachappa

Solicitation # 20261001024

Riverside Unified School District

POSTED

about 18 hours ago

DEADLINE

Interior and Exterior PaintingThis subcontract for Interior and Exterior Painting involves providing comprehensive painting and finishing services for residential projects managed by the Housing Authority of the Cherokee Nation in Nowata County. The scope of work includes surface preparation and the application of paint and finishes to walls, ceilings, and trim, with a strict requirement that all materials used are compliant with the Buy American Act. To be eligible, contractors must hold EPA RRP Lead-Based Paint Certification and adhere to Davis-Bacon Act wage standards, while preference is given to TERO certified entities. Interested parties must submit their responses by October 23, 2026, to deliver fully completed interior and exterior finished surfaces under NAICS code 238320.

Cherokee Nation Housing Authority

POSTED

DEADLINE

Interior Finishes (Painting & Wall Panels)This subcontract opportunity is for the application of final wall and ceiling finishes on facility projects for the City of Oceanside in California. The scope of work involves performing interior painting and the installation of fiberglass reinforced wall panels using commercial grade materials, specifically to deliver finished restroom walls and ceilings for prime contractors. The project is categorized under NAICS code 238320 and is located in Oceanside, zip code 92054. Interested parties must submit their responses by the deadline of October 19, 2026, at 5:00 PM.

City of Oceanside

POSTED

DEADLINE

Wide Format Media Installation Services-Trade Only

Solicitation # seminole-county-public-schools-26270034B-GNM-2027

The School Board of Seminole County is seeking bids from trade-only vendors to provide wide-format media installation services. These services will support district-wide requirements and will be managed through Print Solutions administration. Interested parties must submit their responses by the deadline of October 22, 2026, at 5:00 PM. This solicitation, identified as number 26270034B-GNM-2027, is being handled by the Seminole County Public Schools Purchasing department in Florida. Primary contact for this opportunity is Ginger Midgett.

Seminole County Public Schools — Purchasing

POSTED

DEADLINE

Painting & Wall FinishesThis subcontract opportunity for Painting and Wall Finishes involves providing interior and exterior painting and coating services for renovation projects within the Town of Smithers. The scope of work includes applying paint to walls and ceilings, as well as performing necessary touch-ups on field welds and shop primers to deliver high-quality finished surfaces for prime contractors. The project falls under NAICS code 238320 and is associated with the Province of British Columbia. Interested parties must submit their responses by the deadline of October 30, 2026. Further details and application processes can be accessed through the provided BC Bid portal link.

Town of Smithers

POSTED

DEADLINE

Interior Finishes & MillworkThis subcontract opportunity is for the provision of interior finishes and millwork for facility projects managed by the California Department of General Services. The selected contractor will work under prime contractors to deliver comprehensive interior architectural finishes, including the installation of gypsum board, acoustical ceilings, ceramic tiling, and both interior and exterior painting. Additionally, the scope of work involves the supply and installation of plastic laminate architectural cabinets. The project falls under NAICS code 238320 and is associated with the state of California. Interested parties must submit their responses by the deadline of October 28, 2026. Further details regarding this solicitation can be accessed through the Cal eProcure portal.

California Department of General Services

POSTED

DEADLINE

Window and Wall Sealant Installation ServicesThis subcontract for Window and Wall Sealant Installation Services involves the removal and replacement of sealant for prime contractors working on the City of Harrisonburg Public Safety Building projects in Virginia. The scope of work includes removing existing sealant, preparing substrates with alcohol-based solvents, installing backer rods, and applying Dow 795 silicone sealant to stucco control joints, glass perimeters, and window-to-window interfaces to ensure all joints are fully sealed and tooled. Interested parties must possess a Virginia SCC Identification Number to be eligible for the project. The solicitation was posted on October 1, 2026, with a response deadline of November 19, 2026. The work falls under NAICS code 238320 and will be performed within the City of Harrisonburg.

City of Harrisonburg

POSTED

DEADLINE

in about 2 months

Interior PaintingThis subcontract opportunity involves providing interior painting services for equipment and surrounding areas on Chicago Public Schools facility projects. The selected contractor will work under prime contractors to apply interior paint and industrial coatings in strict accordance with Section 09 91 23 to ensure all finished surfaces meet the required project specifications. The solicitation is categorized under NAICS code 238320 and was posted on October 1, 2026. Interested parties must submit their responses by the deadline of October 20, 2026. Further details and application processes are managed through the Chicago Public Schools procurement portal.

Chicago Public Schools

POSTED

DEADLINE

More opportunities from Department Of Defense → W07V Endist St Paul

Same awarding agency

Multi-turn valve actuator, stem, and pedestal

Solicitation # W912ES26QA004

Solicitation W912ES26QA004 is a firm fixed price requirement issued by the Department of Defense, specifically the USACE St. Paul District, for the procurement of one assembly consisting of a multi-turn valve actuator, rising stem, two stem guides, one stem cover, and one pedestal. This equipment is intended for the Chippewa Diversion low flow channel at the Lac Qui Parle Project in Watson, Minnesota. The contract is a 100% small business set-aside under NAICS 333995. The contractor is responsible for furnishing and delivering the components, including two stem lift nuts and sufficient lubricants for two changes, while the government will handle the final installation. Delivery is required on or before March 31, 2027, with shipping terms set as FOB Destination. Technical specifications are stringent, requiring compliance with AWWA C542 for electric actuators and ASTM A6/A6M for the stem and pedestal fabrication. Pedestal construction must adhere to EM 1110-2-2610 strength requirements, with specific safety factors for ultimate tensile strength, buckling, and unit stress. Quality assurance requires a Quality Control Test Report and certified weld inspections per AWS standards prior to shipment. All items must feature machine-engraved corrosion-resistant legend plates and unique identification marking compliant with MIL-STD-130. Award will be based on the most advantageous offer, considering both price and past performance. Invoicing must be processed through the Wide Area WorkFlow system.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 18 hours ago

DEADLINE

Industrial Variable Frequency Drives (VFDs)

Solicitation # W912ES26QA115

Solicitation W912ES26QA115, issued by the U.S. Army Corps of Engineers St. Paul District, is a total small business set-aside for the procurement of factory-new, commercial-off-the-shelf ABB ACS880 Series Industrial Variable Frequency Drives (VFDs). These drives are critical spares for the Dredge Goetz, supporting essential operations such as the cutter head, main pump motors, ladder, swing, spud, and carriage drives. To ensure system compatibility and prevent unacceptable downtime, the government has issued a brand name justification limiting competition to authorized ABB distributors. The requirement includes four specific VFD models with mandatory factory-installed plus-codes, and field modifications are strictly prohibited. The contract is a single firm fixed price award based on the most advantageous offer, with price as the primary evaluation factor. Deliverables include the hardware, OEM technical documentation in PDF format, a Certificate of Conformance, and a commercial warranty for at least 12 months from commissioning or 18 months from delivery. All items must be delivered FOB Destination to Fountain City, Wisconsin, by February 26, 2027. Strict packaging standards are required, including ASTM industrial crating, moisture-barrier wrapping, and protection against electrostatic discharge and shock. Additionally, equipment must feature permanent OEM nameplates and comply with MIL-STD-130 for unique item identification and MIL-STD-129 for shipment marking.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Crane LMI System, Barge Integration and Components Installation

Solicitation # W912ES26QA112

Solicitation W912ES26QA112, issued by the U.S. Army Corps of Engineers (W07V Endist St Paul), is a Request for Quote for a firm-fixed-price contract to upgrade the safety systems of a Link-Belt 218 crawler crane (Serial Number: BLJO-3653) operating on a barge. The scope of work requires the contractor to remove all existing Load Moment Indicator (LMI) hardware and install, configure, and calibrate a new comprehensive system. This new installation must include a hybrid LMI configuration with a hardwired Boom line, a wireless Whip line with a cone wire rider, an Anti-Two-Block (ATB) system, and dual-axis marine list/trim sensors, all integrated into a single operator cab display. All work must adhere to Link-Belt structural guidelines and manufacturer specifications, with final acceptance contingent upon a joint sign-off of a Post-Installation Calibration, Testing, and Compliance Report. The procurement is unrestricted, though a price evaluation preference is granted to HUBZone small business concerns. Offers are evaluated based on price and must be submitted in Adobe PDF format via the PIEE suite or email by October 14, 2026. Performance must be completed on or before January 15, 2027, at the Army Corps of Engineers Civil Works Service Base in Fountain City, Wisconsin. The contract includes a three-year warranty on parts and workmanship starting from the date of final acceptance. Additionally, the contractor is responsible for providing DoD unique identification for the installed system using two-dimensional data matrix symbology and must comply with various Service Contract Act wage determinations for the performance regions.

Construction Machinery Manufacturing

POSTED

DEADLINE

Supply of ABB ACS880 Series Variable Frequency Drives (VFDs)This small business set-aside subcontract, issued by the Department of Defense via W07V Endist St Paul, involves the procurement of factory-new, commercial-off-the-shelf ABB ACS880 Series Variable Frequency Drives and associated factory-installed options. The selected provider will support prime contractors on USACE projects by supplying genuine hardware, delivering necessary technical documentation, and providing Material Inspection and Receiving Reports. The contractor is responsible for reporting Unique Item Identifiers and ensuring strict adherence to FAR 52.204-9 and all applicable foreign-source prohibitions. Operating under NAICS code 423610, the contract focuses on the reliable delivery of physical VFD hardware to meet specific government procurement standards.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of 22" OD Pipeline Float SetsThis subcontract involves the manufacture and supply of 20 high-visibility pipe float sets designed for 22-inch OD pipelines on USACE dredging projects. Each set must feature 100 percent closed-cell foam filled, weather and corrosion-resistant polyethylene floats with a flotation capacity between 800 and 900 lbs, utilizing either galvanized or stainless steel hardware. All deliverables must strictly adhere to MIL-STD-130 and MIL-STD-129 standards and be delivered to St. Paul, Minnesota. The opportunity is issued by the Department of Defense under the W07V Endist St Paul agency and is designated as a total Small Business Set Aside under NAICS code 339999. Interested parties must submit their responses by October 5, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Dredge Goetz Pipe Floats

Solicitation # W912ES26QA109

Solicitation W912ES26QA109 is a Firm Fixed Price acquisition issued by the Department of Defense for the procurement of twenty pipe float sets to support 22-inch outside diameter pipeline dredging operations for the Dredge Goetz. This is a Total Small Business Set-Aside under NAICS code 326199. The required floats must be constructed from high-visibility, weather and corrosion-resistant polyethylene, feature 100% closed-cell foam filling, and utilize stainless steel or galvanized hardware. Technical specifications require a flotation capacity of 800 to 900 pounds, a maximum weight of 200 pounds per float set, and the ability to grip the pipe without additional sleeves or inserts. Delivery is required to the Army Corps of Engineers Civil Works Service Base in Fountain City, Wisconsin, within 60 to 90 calendar days after receipt of order. Offers are due by October 5, 2026, and must be submitted electronically via the PIEE suite in PDF format. Award decisions will be based on the most advantageous offer, with technical criteria and past performance weighted more heavily than price. To be considered, offerors must provide product data or cut sheets demonstrating compliance with minimum specifications, include the product country of origin, and submit pricing in whole penny amounts with shipping costs integrated into the CLIN pricing. The contract requires adherence to MIL-STD-130 for item unique identification and MIL-STD-129 for shipment labeling. Invoicing is authorized via email as the agency does not currently use the Wide Area WorkFlow system.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Heavy Equipment Hydraulic SpecialistThis subcontract for the Department of Defense, specifically the W07V Endist St Paul, seeks a Heavy Equipment Hydraulic Specialist to perform advanced diagnostics and testing on a Liebherr R954C excavator. The primary objective is to resolve issues regarding low boom lifting power through the use of pressure testing, flow analysis, and system diagnostics utilizing hydraulic flow meters and pressure gauges. The project requires the expertise of factory-trained technicians or certified hydraulic specialists to ensure precise identification of the failure point. The final deliverable for this engagement is a comprehensive diagnostic report. The work is associated with NAICS code 811310 and is located in the 52121 zip code area.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Genuine Liebherr OEM Parts SupplierThis subcontract involves the supply of genuine Original Equipment Manufacturer parts for a Liebherr R954C excavator supporting U.S. Army Corps of Engineers projects in Lansing, Iowa. The selected provider is responsible for sourcing, packaging, and delivering critical hydraulic components, seals, valves, and boom-related hardware. To ensure compliance with genuine OEM requirements, the supplier must be an authorized Liebherr parts distributor. Managed by the Department of Defense through the W07V Endist St Paul agency, the contract falls under NAICS code 423810. The primary objective is the successful delivery of authentic replacement parts to prime contractors to maintain operational readiness of the specified machinery within the 52121 zip code area.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Trash Racks for Lac qui Parle Dam near Watson, MN

Solicitation # W912ES26QA094

The Department of Defense, through the W07V Endist St Paul office, is seeking a contractor to fabricate and deliver fifteen identical hot-dip galvanized trash racks for the Lac qui Parle Dam located near Watson, Minnesota. This project is categorized under NAICS code 332314 and is designated as a total set-aside for small businesses. The solicitation, numbered W912ES26QA094, was posted on September 8, 2026. Interested parties can coordinate with the primary point of contact, Justin Rose, regarding the performance of this contract in the 56295 zip code area.

Plate Work Manufacturing

POSTED

DEADLINE

Whalen Forest Rehabilitation and Restoration

Solicitation # W912ES26QA091

The Whalen Forest Rehabilitation and Restoration project, solicitation number W912ES26QA091, involves the purchase and planting of more than 56,000 trees across approximately 117 acres near New Albin, Iowa. The scope of work includes mechanical site preparation and herbicide treatments across 14 distinct treatment areas to support forest recovery. This opportunity is issued by the Department of Defense through the W07V Endist St Paul office and is designated as a total set-aside for small businesses under NAICS code 561730. The presolicitation was posted on August 10, 2026, with Justin Rose serving as the primary point of contact for the project.

Landscaping Services

POSTED

about 2 months ago

DEADLINE

Project Management & Coordination ServicesThis contract awards comprehensive project management and coordination services under a total small business set-aside, targeting eligible small business concerns as defined by the SBA. The work involves end-to-end oversight of a project tied to event-specific constraints, requiring detailed scheduling, strict adherence to regulatory and compliance standards, execution of bonding obligations, and thorough documentation management. The contractor must coordinate closely with event organizers and relevant government agencies to ensure seamless execution under the authority of the Department of Defense through the W07V Endist St Paul office. Performance is designated for a location with a zip code of 56549, and the work falls under the NAICS code 541330, which classifies management consulting services. The contract is structured as a subcontract and was posted for opportunity on June 26, 2026, with no solicitation number assigned.

Engineering Services

POSTED

DEADLINE

Concrete Foundation InstallationThe contract involves the installation of three concrete foundations at a site with a zip code of 56549 to support the relocation of a farmhouse and other historic cabins. This subcontract is classified as a Total Small Business Set-Aside under the SBA program, ensuring exclusive eligibility for small business concern participation. The North American Industry Classification System code 238110 designates the work as foundation and building exterior contractor services. The contracting activity is listed under the Department of Defense through its W07V Endist St Paul office, with the solicitation posted on June 26, 2026. The work location remains unspecified at the city and state level beyond the provided zip code, and no point of contact information is included in the contract data.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS