Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SLIDE, DRAWER, EXTENS

Active
SPE4A1-26-T-2538Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of one unit of a slide, drawer, extens with NSN 5340015282575 and part number 7397603-00 from Lockheed Martin Corp, supplied under solicitation SPE4A1-26-T-2538. Delivery is required within ten days FOB origin, with inspection and acceptance occurring at the destination, the U.S. Army SSA Powidz AB in Poland. The item must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using the specified preservation methods and unit container codes, with no special markings required. Packaging must adhere to DLA’s procurement standards, prohibiting any mercury or mercury compounds in preservation, packaging, or marking processes, except for functional uses in batteries, instruments, or sensors as explicitly permitted by NAVSEA, which must also meet containment and shockproofing requirements. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels or AQLs unless otherwise defined, and acceptance demands zero non-conformances unless contractually altered. Item Unique Identification is not required as specified by the service customer under DFARS 252.211-7003(c)(1)(i), and the item has no shelf life constraint. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with revisions tied to the solicitation issue or award date. The contracted quantity is fixed at one unit with zero variance allowed, and shipment must align with DLAD Proc Notes C19 and C20 for transportation logistics.

General Info

One slide drawer extens, NSN 5340015282575, delivered FOB origin to Poland per MIL-STD and DLA standards, no UID, zero variance.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A1-26-T-2538 DLA Aviation Aug 11 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Vincent Williams
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SLIDE,DRAWER,EXTENS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
LOCKHEED MARTIN CORP 90536 P/N 7397603-00
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A1-26-T-2538
SECTION B
PR: 7017761316 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017761316 0001 EA 1.000
NSN/MATERIAL:5340015282575
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
BULK BREAK POINT:
W9005D
W6J6 USAREUR-AF SSA OPN SPT
US ARMY SSA POWIDZ AB
8 WITKOWSKA BLDG 28
POWIDZ 62430
PL
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W9005D
W6J6 USAREUR-AF SSA OPN SPT
US ARMY SSA POWIDZ AB
8 WITKOWSKA BLDG 28
POWIDZ 62430
PL
MARKFOR
SPE4A1-26-T-2538
SECTION B
PR: 7017761316 PRLI: 0001 CONT’D
W9005D
W6J6 USAREUR-AF SSA OPN SPT
US ARMY SSA POWIDZ AB
8 WITKOWSKA BLDG 28
POWIDZ 62430
PL
M/F: (TCN) W9005D62090946
RDD: 224
PROJ: 9GU TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE4A1-26-T-2538 NSN/Part Number: 5340-01-528-2575 Quantity: 1 EA Purchase Request: 7017761316QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Retaining Strap Supply and Delivery
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-900R
This contract is for the procurement of a replacement cover identified by NSN 5340017328379 and part number TA486-RC-1841, with a quantity of 66 units to be delivered FOB origin within 151 days of contract award. The item is subject to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and all packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization. Marking must follow MIL-STD-129 with no special markings required, and palletization must adhere to DLA guidelines. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for both freight shipping and parcel post. The contract imposes a strict prohibition on the use of Class I ozone-depleting chemicals, overriding but not relaxing any product specifications, and any substitute chemicals require prior approval. The unit price is $66.00 per unit, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The procurement is governed by DLA procedures for transportation and freight, and all references to units of issue must align with ANSI X12 standards. The solicitation was issued on July 30, 2026, with a response deadline of August 10, 2026, and the original required delivery date is January 9, 2027.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A7-26-T-641G
This contract is for the procurement of seven threaded pin-rivets, identified by NSN 5320014458154 and part number 03A075-6-3AX from Huck International. The order is managed under purchase request 7017838586 with a required delivery date of April 30, 2027, and a delivery window of 171 days. The items are to be delivered FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Manufacturing may require specific casting or forging tooling, for which the government may not provide the necessary equipment. Compliance with DLA packaging requirements is mandatory, specifically following ASTM D3951 and MIL-STD-129 for marking and labeling. All technical and quality requirements are governed by the DLA Master List, which takes precedence over standard packaging specifications.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-951A
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 20 helical compression springs under NSN 5360-00-967-4838. The contract requires delivery within 164 days after order and is categorized under NAICS code 332510. Performance is designated for Phoenix, Arizona, with the response deadline set for August 21, 2026. The contractor must adhere to several technical and quality requirements, including DLA packaging standards, source approval request documentation, and the removal of government identification from non-accepted supplies. Strict compliance is required regarding supply chain traceability documentation and environmental restrictions, specifically prohibiting the use of asbestos and Class I ozone-depleting chemicals. Any substitute materials must be submitted for official approval.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
RIVET, TUBULAR
Solicitation # SPE4A6-26-T-15KB
This solicitation from the ASC Commodities Division of the Department of Defense is for the procurement of 2,526 tubular rivets under part number 5320-01-333-9936. The contract requires delivery within 240 days after receipt of order and is categorized under NAICS code 332510. Performance is designated for Tracy, California. Strict compliance with DLA packaging requirements and export control regulations is mandatory. Because the technical data is subject to ITAR or EAR restrictions, access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed export control training. All technical data disclosure must be authorized by the Department of State or Department of Commerce in accordance with DFARS 252.225-7048.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-86F1
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
CONTAINER, COLLAPSIB
Solicitation # SPE8ED-26-T-1263
This contract, identified as SPE8ED-26-T-1263, is for the procurement of two collapsible containers with the National Stock Number 8145-01-600-8764. The order is issued by the Department of Defense to Pikes Peak Cargo Secure Inc, located in Colorado Springs, Colorado. Delivery is required within 10 days after the order is placed, with a required delivery date of August 6, 2026. The items are to be shipped FOB Origin to the 1AD Sustainment Brigade SSA at Fort Bliss, Texas. The procurement is subject to strict technical and quality requirements, including DLA packaging requirements RP001 and ASTM D3951 standards. All packaging and labeling must comply with MIL-STD-129. The contract specifies a zero percent quantity variance and designates both the inspection and acceptance points at the destination. Additionally, the agreement incorporates guidelines for the removal of government identification from non-accepted supplies and the handling of covered defense information.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-641A
This contract is for the procurement of five shims, identified by NSN 5365011910761 and part number 20435-1140 from Sargent Controls and Aerospace. The order is designated as a critical application item and requires strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Delivery is set for 171 days after the order, with a required delivery date of May 19, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by specific NAVSEA standards. All technical and quality requirements are integrated via the DLA Master List, and the contract specifies a zero percent quantity variance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-640K
This contract, identified as SPE4A7-26-T-640K, is a solicitation for the procurement of four shims under NSN 5365-01-460-3387. The requirement specifies a delivery timeframe of five days after order and mandates that the items be delivered FOB Origin, with inspection and acceptance occurring at the destination. The procurement is managed by the Department of Defense through the ASC Supplier Oper AE and AF Div. Technical compliance requires adherence to the DLA Master List of Technical and Quality Requirements, with specific sampling methods following MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 standards. The items are to be shipped via the fastest traceable means to the DLA Distribution Management Office in Yermo, California, with a required delivery date of August 6, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-641T
This contract is for the procurement of one spacer plate, identified by NSN 5365013920779 and part numbers HAN4285-1 and HAN4298-3 from Hansome Energy Systems Inc. The delivery is required within 20 days of order, with a required delivery date of June 15, 2026. Shipping is FOB Origin to the NAVSEALOGCEN Warehouse Ops in Mechanicsburg, Pennsylvania, and must be sent via traceable means rather than parcel post. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan where acceptance requires zero non-conformances. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The contract also incorporates technical and quality requirements from the DLA Master List and specifies that any government identification must be removed from non-accepted supplies.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A0-26-T-4243
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one threaded pin-rivet under National Stock Number 5320-00-508-8386 and part number HLT316-6-4. The contract requires a delivery timeframe of five days after receipt of order and is categorized under NAICS code 332510. Performance is designated for Virginia Beach, Virginia. The procurement is subject to strict technical and quality standards, including DLA packaging requirements and physical identification marking. Compliance is mandated through the Certificate of Quality Compliance and specific Contract Data Requirements Lists. Suppliers must adhere to the DLA Master List of Technical and Quality Requirements and review the Technical Data Package for comprehensive specifications.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE4A7-26-T-640A
This contract is for the procurement of mounting brackets, identified by NSN 5342016562668 and part number 1004-B from Performance Advantage Company, Inc. The total quantity requested is 175 units, divided across three separate line items: 3 units for DLA Distribution Albany, 11 units for DLA Distribution Barstow, and 161 units for DLA Distribution New Cumberland. Delivery is required within 32 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It explicitly prohibits the use of Class I ozone-depleting chemicals in the manufacturing of the items. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for all deliveries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 488190
New
DIBBS
SCREW ASSEMBLY, PANE
Solicitation # SPE4A1-26-T-2559
This contract is for the procurement of three screw assemblies for panels, identified by NSN 5305016683006 and Hi-Shear Corporation part number HST12YW16-11. The item is designated as a critical application item. Delivery is required within 84 days, with a required delivery date of August 7, 2026, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement incorporates several DLA technical and quality requirements, including specific standards for packaging, configuration change management, and physical item marking. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with zero-based sampling plans required unless otherwise specified. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA procurement requirements.
Other Support Activities for Air Transportation

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333914
New
DIBBS
PEDAL ASSEMBLY, CONT
Solicitation # SPE4A1-26-T-2557
This contract, identified as SPE4A1-26-T-2557, is a solicitation from the Department of Defense Aviation Supply Chain for the procurement of four pedal assemblies, also described as ejector assemblies. The items are identified by NSN 1680-01-614-4874 and Lockheed Martin part number 3319718-5. The delivery is required within 171 days after order, with a need ship date of February 7, 2027, and an original required delivery date of April 26, 2027. The shipment is designated as FOB Origin and will be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance with specific technical and quality requirements is mandatory, including DLA packaging requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging. Inspection and acceptance will take place at the destination, and the contract allows for zero quantity variance.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
SHAFT, BUTTERFLY, VAL
Solicitation # SPE4A1-26-T-2542
This solicitation is for the procurement of 12 butterfly valve shafts under NSN 1660-00-628-2772 for the Department of Defense Aviation Supply Chain. The contract requires delivery within 171 days after the order is placed and will be performed at Tinker AFB. The primary point of contact for this requirement is Scott Brunner. The agreement is subject to several technical and quality requirements, including DLA packaging standards, tailored higher level quality requirements, and configuration change management protocols. While Item Unique Identification is not required by the service customer, the contract does mandate compliance with covered defense information regulations. Alternate offerors must provide a complete data package for both approved and alternate parts.
Aircraft Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE4A1-26-T-2549
This contract is for the procurement of 245 helical compression springs, identified as a critical application commercial item under NSN 5360005719675. The requirement specifies part number 365432-2, with Boeing Distribution Services and Honeywell International listed as associated entities. Delivery is required within 171 days, with a need ship date of February 7, 2027, and shipment directed to Arizona Industries for the Blind in Phoenix, Arizona. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for source approval, packaging, and measuring equipment. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA procurement requirements.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A1-26-T-2555
This contract is for the procurement of 35 structural aluminum panels, identified by NSN 1560014439673 and Lockheed Martin part number 3350222-1. The agreement specifies a delivery timeframe of 121 days, with a required delivery date of May 16, 2027, and a need ship date of April 16, 2025. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements, physical identification marking, and the removal of government identification from non-accepted supplies. Quality assurance will be managed through zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contract mandates compliance with Cybersecurity Maturity Model Certification Level 2 and the protection of covered defense information. Packaging must follow MIL-STD-129 and ASTM D3951, unless the material is deemed hazardous.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RADOME, AIRCRAFT, MAT
Solicitation # SPE4A1-26-T-2541
This contract, identified as SPE4A1-26-T-2541, is for the procurement of three aircraft radomes, part number 092-00647-002, manufactured by Axillon Aerospace. The items are designated as critical application items and must be delivered to the DLA Distribution Depot in Bremerton, Washington, within 165 days. The contract specifies a need ship date of January 31, 2027, and an original required delivery date of December 23, 2027. The agreement mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129, and requires compliance with CMMC Level 2 self-assessment and covered defense information protocols. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with inspection and acceptance occurring at the destination. Additionally, the contract incorporates the DLA Master List of Technical and Quality Requirements and specifies that item unique identification is not required.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE4A1-26-T-2550
This contract is for the procurement of 10 nonmetallic hose assemblies, identified by NSN 4720-01-115-5872 and Lockheed Martin part number 16H2521-57. This is a critical application item and a restricted source procurement requiring engineering source approval by the government design control activity. The delivery is set for 171 days after order, with a need ship date of February 7, 2027, and a final required delivery date of January 23, 2028. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, marking, and the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, with final delivery and inspection occurring at the destination in Tracy, California.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A1-26-T-2558
This solicitation from the Department of Defense Aviation Supply Chain is for the procurement of 143 retaining rings under part number 5325-01-140-4285. The contract requires delivery within 143 days after receipt of order and adheres to specific DLA packaging, marking, and quality requirements. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific verification levels assigned to critical, major, and minor attributes. The contract mandates strict compliance with cybersecurity and export control regulations, including CMMC Level 2 certification and adherence to ITAR and EAR guidelines. Technical data is restricted and may only be disclosed to authorized contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training. All technical and quality requirements are governed by the DLA Master List based on the solicitation or award date.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, CLINCH
Solicitation # SPE4A1-26-T-2548
This solicitation, issued by the Department of Defense Aviation Supply Chain, is for the procurement of plain clinch nuts under NSN 5310-00-341-7465. The contract requires a total quantity of 261 packages, with each package containing two units. The place of performance is designated as Cherry Point, and the delivery timeline is set for 100 days after the order is placed. The procurement is governed by specific technical and quality requirements outlined in the DLA Master List, including mandatory packaging standards and regulations regarding the removal of government identification from non-accepted supplies. Interested parties must respond to solicitation SPE4A1-26-T-2548 by the deadline of August 19, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
DIAPHRAGM, ACTUATOR
Solicitation # SPE4A1-26-T-2543
This contract is for the procurement of seven special shaped actuator valve diaphragms, identified by NSN 4820-01-060-9366 and Honeywell part number 3311897. The order is managed by the Department of Defense Aviation Supply Chain under solicitation SPE4A1-26-T-2543, with a required delivery date of February 18, 2027, and a delivery window of 171 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA technical, quality, and packaging requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Item Unique Identification is not required for this order.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
ARM, LINK
Solicitation # SPE4A1-26-T-2551
This contract is a solicitation issued by the Department of Defense Aviation Supply Chain for the procurement of four units of ARM, LINK, identified by NSN 6220-01-125-3773 and part number 46-0152-1 from Grimes Aerospace Company. The agreement specifies a delivery timeline of 171 days after order, with a required delivery date of April 8, 2027, and a need ship date of February 7, 2027. Shipping is designated as FOB Origin, with the final inspection and acceptance occurring at the destination, DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards, MIL-STD-129 labeling, and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Security and compliance obligations include the application of Covered Defense Information and a CMMC Level 2 Self-Assessment. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, ensuring all government identification is removed from any non-accepted supplies.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A1-26-T-2545
This contract is for the procurement of one wiring harness, part number 8531135-920 manufactured by Honeywell International Inc, under NSN 6150-01-545-5267. The solicitation, issued by the Department of Defense Aviation Supply Chain, specifies a delivery timeline of 171 days with a required delivery date of April 5, 2027. The item is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. Compliance requirements include DLA packaging standards, MIL-STD-129 marking, and CMMC Level 2 self-assessment for cybersecurity. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, emphasizing zero non-conformances for acceptance. Additionally, the contract mandates adherence to configuration change management and the removal of government identification from non-accepted supplies, while noting that Item Unique Identification is not required for this specific order.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details