Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Solar and Backup Power System Supply and Installation Support

Active

Federal

Response Deadline09/01/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply and installation support of a comprehensive solar and backup power system, encompassing solar panels, inverters, batteries, and all associated components necessary to establish a reliable off-grid or hybrid energy solution. The scope includes the integration of these systems with existing site infrastructure to ensure seamless operation and maximum efficiency, with an emphasis on resilience and energy independence. The work involves technical coordination to align the new power systems with current building systems, requiring expertise in both renewable energy technology and facility integration. This is a subcontract under NAICS code 238210, issued by the Department of the Interior through the Office of Acquisition and Grants in Denver, with a response deadline of September 1, 2026. The contract does not specify a location for performance, and no set-aside provisions are indicated. The procurement aims to acquire a fully functional, scalable backup power solution capable of sustaining critical operations during grid outages, with all equipment and installation services required to meet rigorous performance, safety, and durability standards. Potential bidders must demonstrate proven experience in solar energy system deployment and system integration.

General Info

Supply and installation of solar and backup power system for reliable off-grid energy solution.

Agency

Department Of The Interior → Ofc Of Acquisition Grants-DenverView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

CO

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineSep 1

Submission deadline

Response Deadline

09/01/2026, 06:00:00 PM UTCin 28 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Ofc Of Acquisition Grants-Denver

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Ofc Of Acquisition Grants-Denver

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and support for installation of solar panels, inverters, batteries, and related components for the backup power system, including integration with site systems.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 2 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 2 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 2 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 2 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 2 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 2 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

The contract involves the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases with work including conduit trenching and boring between three airport buildings. The project falls under NAICS codes 238210, 237130, and 237990 and has a construction magnitude estimated between one and five million dollars. Solicitation is restricted to small business set-asides, including categories such as Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses. The solicitation, titled RFO AWP-0772-00, was posted on August 4, 2026, with proposals due by August 15, 2026. All inquiries and submissions must be directed to Anna Ma, Subcontract Administrator at Parsons, via email at anna.t-ctr.ma@faa.gov or phone at 360-204-4418. The work is managed by PTSI Managed Services, Inc., with performance located entirely within Hawaii.

PTSI Managed Services, Inc.

POSTED

about 6 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract involves the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, to be completed in two phases with conduit trenching and boring performed between three airport buildings. The work falls under NAICS codes 238210, 237130, and 237990 and has a construction magnitude estimated between one and five million dollars. The solicitation is reserved exclusively for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses as defined by the SBA. Interested firms must submit responses by the deadline of August 15, 2026, and should direct all inquiries to Anna Ma, Subcontract Administrator at Parsons, via email at anna.t-ctr.ma@faa.gov or phone at 360-204-4418. The contract is managed by PTSI Managed Services, Inc. and issued under the federal opportunity listing for the SBA.

PTSI Managed Services, Inc.

POSTED

about 6 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # Replacement Fiber Line

The contract entails the replacement of existing multimode fiber optic cabling between Building 2436 and Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky, with a new 12-strand single mode fiber optic system to ensure reliable network connectivity between the network closet in Building 2436 and the Maintenance Office in Building 2443. The scope of work requires the complete removal of all retired multimode aerial fiber lines and splice boxes from utility poles and building infrastructure, followed by the installation of new fiber using center-owned utility poles. All necessary labor, equipment, tools, and materials must be furnished by the contractor, including specified components such as Belden FS3L0024NS 12-strand OS2 OSP fiber, ECX-01U rack-mounted enclosures, FFSX12LD adapter panels, and FTSLC900FS01 LC connectors or approved equivalents. SFPs are to be provided by the Job Corps. The project is structured as a fee-for-service agreement with a lump-sum pricing model, and the contractor must submit weekly or bi-weekly invoices that include purchase order number, breakdown of service dates, itemized pricing with extended amounts, and invoice number and date. Performance is governed by strict quality standards requiring that all work conform to specifications, be merchantable, free of defects, and constructed with good material and workmanship, with final acceptance occurring at the MTC-designated point after delivery regardless of prior inspections or payments. The solicitation is designated as a small business set-aside under NAICS code 238210, open to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. Respondents must self-certify their business category and provide a Unique Entity Identifier, Tax ID, and DUNS number. First-tier subcontractors with awards exceeding $30,000 must disclose any debarment status under FAR 52.209-6. Labor standards require compliance with Service Contract Labor Standards under Wage Determination WD# 2015-4687 (Rev 31) dated December 3, 2025, and the Contract Work Hours and Safety Standards Act for overtime compensation. Contractors must maintain general liability insurance of $1 million per occurrence and $3 million aggregate, auto liability of

Earle C. Clements Job Corps Center

POSTED

about 6 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is upgrading an existing VHF Omnidirectional Range (VOR) facility in Watertown, New York, to a modern Doppler VORTAC system with an offset TACAN, requiring the complete demolition of the current infrastructure. The new facility will feature an on-site constructed 37’x37’ steel building equipped with a 60-foot diameter counterpoise integrated into the roof, along with full foundations, site preparation, and utility installations to support the Doppler VORTAC components. In addition, an offset TACAN component will be installed as a separate walk-up steel tower measuring 16’x16’x20’H, also requiring its own dedicated foundations, site work, and utility connections. The project is being managed by PTSI Managed Services, Inc. under contract number AEA-0536, with a solicitation deadline of August 28, 2026, and is set aside exclusively for small business concerns including small disadvantaged businesses, women-owned small businesses, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses, as governed by the NAICS code 238210 for electrical and wiring installation.

PTSI Managed Services, Inc (Parsons)

POSTED

about 6 hours ago

DEADLINE

Medium Voltage Electrical Repair and Maintenance on an as Needed Basis at Lufkin State Supported Living Center

Solicitation # HHS0017399V2

The Texas Health and Human Services Commission is seeking qualified vendors to provide medium voltage electrical repair and maintenance services on an as-needed basis at the Lufkin State Supported Living Center in Lufkin, Texas. The solicitation, identified as HHS0017399V2, focuses on the replacement of electrical system components and related services critical to the facility’s operational integrity. Bids must be submitted by August 24, 2026, at 10:30 a.m. Central Time, following a standard procurement timeline that includes a question submission deadline of August 10, 2026, and an anticipated contract start date of September 1, 2026. All communications and updates will be posted through the Texas SmartBuy electronic system, and any required addenda will be issued by August 13, 2026. The contract is open to all eligible responders without set-aside restrictions, and the primary point of contact for inquiries is Katrinia Ender, reachable via phone or email provided in the solicitation. Performance will be limited to the specified location in Lufkin, Texas, with services activated only when triggered by facility needs.

Health and Human Services Commission

POSTED

about 14 hours ago

DEADLINE

REBID 25kW Standby Generator and Automatic Transfer Switch - Menlo Lift Station

Solicitation # RFP-HH-3965

Eastern Municipal Water District is seeking proposals for the supply and delivery of a single 25 kW standby generator system including a generator-mounted load bank and a 480V 100A open transition automatic transfer switch, all required to meet the technical specifications detailed in the Standard Detail Provisions and this RFP. The selected vendor must also provide full start-up and commissioning services to ensure the system operates as intended upon installation. This solicitation, titled REBID 25kW Standby Generator and Automatic Transfer Switch – Menlo Lift Station and identified by RFP-HH-3965, was posted on August 3, 2026, with responses due by August 24, 2026. Proposals must be submitted through the designated online portal, and all work must be performed in California at the Menlo Lift Station location. Haely Hernandez serves as the primary point of contact for inquiries and can be reached via email at hernanha@emwd.org.

Eastern Municipal Water District

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of The Interior → Ofc Of Acquisition Grants-Denver

Same awarding agency

On-Site Support Services (Toilet Facilities, Safety, and Site Management)The contract calls for the provision of temporary toilet facilities and the ongoing maintenance of site safety, cleanliness, and full compliance with USGS site rules throughout the duration of construction activities. Service providers are expected to ensure sanitary conditions are consistently met, hazardous waste and debris are properly managed, and all operational practices align with federal safety and environmental standards. The work must be performed in accordance with the guidelines established by the U.S. Geological Survey to safeguard personnel, protect the surrounding environment, and uphold institutional protocols during active construction phases. This subcontract is governed under NAICS code 561990 and was posted on August 3, 2026, with a response deadline of September 1, 2026. It is issued by the Office of Acquisition and Grants in Denver under the Department of the Interior. No set-aside designation has been specified, and while the exact location of performance is not detailed, services are expected to be delivered at a federal construction site operating under USGS regulations. Contractors must be prepared to deliver reliable, continuous support with emphasis on adherence to federal compliance standards and proactive site management to support safe and lawful operations.

All Other Support Services

POSTED

about 22 hours ago

DEADLINE

Disposal of Old HVAC Unit and Related MaterialsThe contract titled Disposal of Old HVAC Unit and Related Materials requires the safe removal, transport, and environmentally compliant disposal of an obsolete HVAC unit, with strict adherence to regulations governing refrigerants and hazardous components. All work must ensure the proper handling, recovery, and disposal of substances such as ozone-depleting refrigerants and other regulated materials to prevent environmental contamination and ensure regulatory compliance. The scope encompasses the full lifecycle management of the unit from extraction at the site to certified final disposal, with no allowance for improper release or landfill disposal of hazardous elements. This subcontract was posted on August 3, 2026, with a response deadline of September 1, 2026, and is managed by the Office of Acquisition and Grants in Denver under the Department of the Interior. The NAICS code 562112 indicates the work falls under Hazardous Waste Collection and Treatment, confirming the environmental and safety standards governing the performance. The place of performance and point of contact details are not specified, but compliance with federal environmental statutes and documented proof of certified disposal methods are implied requirements. Subcontractors must demonstrate capability in handling regulated materials with appropriate licensing and proven procedures to meet contractual obligations.

Hazardous Waste Collection

POSTED

about 22 hours ago

DEADLINE

Electrical Work for HVAC and Solar/Backup Power SystemThe contract involves the electrical connections and circuit integration necessary for installing a new mini-split HVAC system alongside a solar and backup power system, requiring full wiring, dedicated disconnects, proper grounding, and strict adherence to all applicable electrical codes. Work must ensure seamless compatibility between the HVAC and renewable energy components, with all installations meeting safety and performance standards for residential or commercial application. This is a subcontract under NAICS code 238210, posted on August 3, 2026, with a response deadline of September 1, 2026. It is managed by the Office of Acquisition Grants-Denver under the Department of the Interior, and while the place of performance and point of contact details are unspecified, the work must be completed in accordance with federal procurement guidelines for electrical systems supporting energy efficiency and sustainability objectives.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 22 hours ago

DEADLINE

HVAC System Installation (Mini-Split Units)The contract specifies the complete removal and disposal of the existing HVAC unit at the Office Building, followed by the installation of a new mini-split system consisting of an outdoor condenser and an indoor head unit. This work is categorized under NAICS code 238220, indicating it falls under heating, air conditioning, and refrigeration contractors. The project is structured as a subcontract with no set-aside classification, and the solicitation was posted on August 3, 2026, with responses due by September 1, 2026. The contracting agency is the Office of Acquisition and Grants-Denver under the Department of the Interior, though specific location details for the place of performance and point of contact are not provided. All activities are to be performed at the Office Building, and the scope is limited to the specified HVAC replacement with no additional services outlined.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

Solicitation # 140G0226Q0086

INDIMAG 2 is a solicitation issued by the Office of Acquisition and Grants in Denver under the Department of the Interior, with the solicitation number 140G0226Q0086 and a NAICS code of 334516. The solicitation was posted on August 3, 2026, and responses are due by August 12, 2026, at 6:30 p.m. Eastern Time. The contract does not specify a set aside type or description, indicating it is open to all eligible offerors without demographic or size-based restrictions. The primary point of contact for inquiries is Yvette Sornberger, reachable via email at yvette_sornberger@ios.doi.gov or by phone at 303-236-9332. The office is located in Denver, Colorado, with a ZIP code of 80225, though the place of performance has not been designated with specific city, state, or zip details. All relevant information and submissions must be processed through the SAM.gov portal linked in the solicitation.

Analytical Laboratory Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

BOU HVAC REPLACEMENTS

Solicitation # 140G0226Q0114

The contract titled BOU HVAC REPLACEMENTS is a solicitation issued by the Office of Acquisition and Grants in Denver, under the Department of the Interior, aimed at replacing heating, ventilation, and air conditioning systems. The solicitation number is 140G0226Q0114, posted on August 3, 2026, with a response deadline of September 1, 2026, at 6:00 PM. It is classified under the NAICS code 238220 for HVAC installation services and is not designated for any specific small business set-aside. The primary point of contact for inquiries is Philip Robinson, reachable via email at philip_robinson@ios.doi.gov, though the provided phone number appears to be incomplete. The performance location details are unspecified, but the contracting office is located in Denver, Colorado, with a ZIP code of 80225. Interested parties must submit responses through the SAM.gov portal using the provided UI link before the deadline.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

46--DI/RO WATER FILTER CANISTERS

Solicitation # 140G0226Q0110

This contract is a Small Business Set-Aside Blanket Purchase Agreement (BPA) under solicitation number 140G0226Q0110, issued by the Department of the Interior’s Office of Acquisition and Grants in Denver, Colorado, targeting the supply of 14-inch Carbon and Mixed Bed Deionizer (DI) filter canisters for the USGS Upper Midwest Environmental Sciences Center in La Crosse, Wisconsin. The BPA has a one-year performance period from August 17, 2026, to August 16, 2027, with an annual expenditure ceiling of $12,000 and no minimum order requirement. Vendors are required to provide regenerated filter tanks through a core exchange program, maintaining ownership of all tanks while offering same-day or next-day regeneration services with a strict 48-hour delivery commitment upon request. Deliveries must be made F.O.B. destination during receiving hours of 7:00 a.m. to 3:30 p.m. Central Time, Monday through Friday, with 24-hour advance notice required, and all shipments must include a packing list and core credit documentation. Evaluation will prioritize vendor capability—particularly individual canister regeneration and consistent 48-hour delivery performance—followed by proven past performance in Wisconsin counties including La Crosse, Vernon, Monroe, Jackson, Trempealeau, and Eau Claire, with price serving as the deciding factor only if technical proposals are equally meritorious. Payment is managed through the Invoice Processing Platform for orders over $15,000 and via Governmentwide Commercial Purchase Card for smaller amounts, with no use of WAWF. The contracting officer is Mary Wilson, who along with Mark Goede are the only authorized personnel to issue BPA calls. The solicitation incorporates standardized FAR clauses, all modified by a March 2026 deviation, including whistleblower protections, human trafficking prohibitions, service contract act compliance, and small business program requirements, while requiring participants to hold a valid SAM.gov UEI and qualify as a small business under NAICS 333310 with a 1,000-employee size standard. All proposals must be submitted electronically via email by August 7, 2026, and include a completed SF-1449 form along with an Excel-based pricing schedule. No MIL-STD packaging standards are referenced, and traceability of regeneration history, test results, and lot numbers

Commercial and Service Industry Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Logistics and Delivery of Regulated Chemical ShipmentsThe contract, titled Logistics and Delivery of Regulated Chemical Shipments, requires the transportation and final delivery of chemical standards and buffers to the Denver Federal Center, with full compliance to Department of Transportation and Environmental Protection Agency regulations for hazardous materials where applicable. All shipments must be handled, packaged, labeled, and transported in accordance with federal hazardous materials standards to ensure safety and regulatory adherence throughout the logistics chain. The work involves precise coordination for timely delivery to a federal facility, with no tolerance for noncompliance due to the nature of the materials involved. This is a subcontract opportunity posted on July 31, 2026, with a response deadline of August 12, 2026, at 6:30 PM. The NAICS code 484220 identifies it as a contract within the Truck Transportation industry, specifically for specialized freight services. The contracting agency is the Office of Acquisition and Grants - Denver, under the Department of the Interior, though no specific place of performance or point of contact details are provided. Subcontractors must be prepared to meet all federal regulatory requirements and submit proposals that demonstrate capability in handling regulated chemical shipments prior to the deadline.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Specialty Packaging and Labeling for Sensitive ChemicalsThe contract seeks specialized packaging and labeling services for chemical standards and buffers, ensuring their structural integrity, chemical stability, and full regulatory compliance throughout shipment and storage. The solution must address the unique challenges of handling sensitive materials, including resistance to leakage, thermal extremes, and environmental degradation, while adhering to all applicable transportation and safety standards. Labels must be durable, legible, and include all required hazard, handling, and identification information to meet global regulatory requirements. This is a subcontract opportunity under NAICS code 325992, posted by the Office of Acquisition and Grants in Denver under the Department of the Interior. Responses are due by August 12, 2026, at 6:30 p.m. Eastern Time, with no set-aside designation applied. The performance location is not specified, but the packaging and labeling services must support nationwide or international distribution requirements. Bidders must demonstrate experience with high-integrity chemical containment systems and compliance with federal and international standards for hazardous material handling.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE

Buffer Solutions for Field and Lab UseThe contract pertains to the manufacture and delivery of precision pH buffer solutions designed to preserve sample integrity during water testing in both laboratory and field settings. These solutions are critical for ensuring accurate and reliable pH measurements, which are essential in environmental monitoring, regulatory compliance, and scientific research involving water quality. The work involves producing high-quality, stable buffer formulations that meet stringent performance standards for consistency, shelf life, and accuracy across varying environmental conditions. The solicitation is classified as a subcontract under NAICS code 325188, which corresponds to other basic organic chemical manufacturing, indicating the specialized chemical production required. The opportunity was posted on July 31, 2026, with a response deadline of August 12, 2026, at 6:30 PM. The contracting entity is the Office of Acquisition and Grants in Denver under the Department of the Interior, though specific performance location and point of contact details are not provided. The work is intended to support federal water quality initiatives and requires strict adherence to technical specifications to ensure the buffers reliably maintain sample conditions under diverse field and lab use scenarios.

All Other Basic Inorganic Chemical Manufacturing

POSTED

DEADLINE

Certified Reference Materials for Water Quality TestingThe contract is for the supply of high-purity, NIST-traceable chemical standards essential for calibrating instruments and validating analytical methods used in water quality testing at USGS laboratories. These reference materials must meet exacting purity and certification requirements to ensure the accuracy and reliability of environmental data collected across federal water monitoring programs. The standards are critical for maintaining compliance with federal analytical protocols and supporting the integrity of scientific results reported by the US Geological Survey. The opportunity is structured as a subcontract under the Department of the Interior’s Office of Acquisition and Grants in Denver, classified under NAICS code 325998 for other chemical product manufacturing. The solicitation was posted on July 31, 2026, with a response deadline of August 12, 2026, at 6:30 PM Eastern Time. There is no specified set-aside designation, and the place of performance and point of contact details are not provided. Contractors must be prepared to deliver certified materials that conform to NIST traceability standards and support the rigorous quality control needs of federal water analysis operations.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Supply of Solar and Electrical EquipmentThe contract seeks the supply of solar panels, inverters, battery systems, mounting hardware, and associated electrical components that must fully comply with U.S. Geological Survey technical standards and applicable federal requirements. All equipment must meet rigorous performance, safety, and durability benchmarks to ensure integration into federal energy infrastructure. The solicitation is issued as a subcontract under NAICS code 423620, which pertains to wholesale trade of electrical apparatus and equipment, and is managed by the Office of Acquisition and Grants in Denver under the Department of the Interior. Responses are due by August 31, 2026, at 6:00 p.m. Eastern Time, with the posting date listed as July 31, 2026, indicating a one-month window for bidder preparation and submission. The place of performance and point of contact details are not specified, suggesting that delivery may be coordinated to multiple federal sites or that logistics will be determined post-award. Compliance with federal standards is mandatory, and suppliers must be prepared to provide documentation verifying adherence to all technical, environmental, and procurement regulations.

Household Appliances, Electric Housewares, and Consumer Electronics Merchant Wholesalers

POSTED

DEADLINE