This Government Contract opportunity from Department Of Defense was posted on June 5, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SOLE SOURCE - PC104+ POWER SUPPLY

Awarded

N0016418Q0040Federal

Submission Closed06/01/2018, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334418

New

Federal

Printed Wiring Board Fabrication and AssemblyThis subcontract involves the fabrication and assembly of three Printed Wiring Boards, specifically part number 285T0458-203, for Department of the Air Force projects managed by the Ok DLA Aviation At Oklahoma City. The selected contractor is responsible for the new manufacture, procurement, and integration of all component parts in strict accordance with the Engineering Data List. To ensure quality and compliance, the contractor must adhere to MQR-PSD-1 standards and possess the capability to support a Source Approval Request package. The project is categorized under NAICS code 334418, with a response deadline set for November 20, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Radar Transmitter Component and Parts SupplyThe Radar Transmitter Component and Parts Supply subcontract involves providing high-precision electronic components, sub-assemblies, and replacement parts to prime contractors supporting the USAF 448th Supply Chain Management Wing. Operating under NAICS code 334418 for the Department of Defense, the provider must source parts by National Stock Number and Part Number while strictly adhering to AS5553 standards to ensure authenticity and prevent the introduction of counterfeit components. All deliverables must be marked in accordance with MIL-STD-130 and MIL-STD-129 and must follow all applicable Special Packaging Instructions. The primary objective of the contract is the delivery of certified authentic replacement components to maintain the operational integrity of radar transmitter systems.

POSTED

DEADLINE

PCBA Teardown, Repair, and RFI RestorationThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, overhaul, and modification of flight-critical Printed Board Assemblies. The selected contractor will be responsible for disassembling, cleaning, inspecting, and replacing components in accordance with TDP VER 001 and REF NR 8430022-502 to deliver eight Ready for Issue board assemblies. Work will be performed in Philadelphia and requires the use of precision soldering tools and diagnostic equipment. To be eligible, the contractor must be a Government-approved source holding either ISO 9001 or AS9100 certification. The project falls under NAICS code 334418, with a response deadline set for October 30, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

NRP,PRINTE DBRD ASS — 5998016636129 — N0038327QSA01

Solicitation # N0038327QSA01

Solicitation N00383-27-Q-SA01, issued by NAVSUP Weapon Systems Support, is a small business set-aside for the teardown, evaluation, repair, overhaul, and modification of eight NRP Printed Board Assemblies (NSN 5998-01-663-6129, Part Number 8430022-502). The primary objective is to return these units to a Ready for Issue (RFI) condition within a 90-day delivery period. The work is to be performed at the CAES Systems LLC facility in Lansdale, Pennsylvania, and will be issued as a delivery order under BOA N00383-25-G-NP01. The contractor is responsible for providing all necessary labor, materials, and tooling, with strict prohibitions against part cannibalization unless specifically approved. The contract mandates adherence to ISO 9001 or SAE AS9100 quality systems and ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. Key administrative requirements include mandatory reporting via the Commercial Asset Visibility Repairables Portal and strict packaging compliance with MIL-STD-2073 and MIL-STD-129. The government will award the contract to a single responsible offeror based on a best-value determination, prioritizing past performance over price. Special provisions are included for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) components, and Over and Above Repair (OAR) efforts, all of which require written concurrence from DCMA and the Procuring Contracting Officer.

Navsup Weapon Systems Support

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly ManufacturerThis subcontract involves the manufacture and supply of special-purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating assemblies according to NSN 6150-01-564-6021 specifications, utilizing a specific technical data package that dictates the required wire gauges, connectors, and shielding. To ensure all technical requirements are met, the contractor must perform Contractor First Article Testing and complete a full inspection before delivery. The work is categorized under NAICS code 334418 and is to be performed in New Cumberland, Pennsylvania. The response deadline for this opportunity is October 27, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Blind Rivets (NSN 5320015935151)This subcontract involves the supply of 184 units of blind rivets for prime contractors working on DLA Weapons Support ASC projects. The contractor is responsible for sourcing or manufacturing rivets that strictly adhere to NSN 5320015935151 specifications. Performance of the contract requires strict adherence to RP001 DLA Packaging Requirements and inspection protocols outlined in RQ009. To be eligible, the provider must comply with RQ001 Higher Level Quality Requirements and maintain active registration in AMPS/VSM. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Alto-Shaam Part FI-26383This subcontract involves the procurement and delivery of 21 units of Alto-Shaam Part Number FI-26383 to support prime contractors on DLA Land and Maritime projects. The work is managed under the Department of Defense for the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The contractor is required to adhere to strict military standards for packaging, marking, and palletization, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contract mandates rigorous cybersecurity compliance in accordance with NIST SP 800-171 and DFARS 252.204-7012.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturing of Circuit Card Assembly (NSN 5998015321911)This subcontract involves the manufacture and supply of Circuit Card Assembly NSN 5998015321911 for prime contractors supporting DLA supply contracts. The scope of work includes the fabrication and assembly of circuit cards utilizing SMT and soldering equipment in strict accordance with DLA technical data. The project is managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The contract is designated as a Total Small Business Set-Aside under NAICS code 334418. A critical requirement of the performance is adherence to domestic material restrictions, specifically complying with the Buy American Act and Berry Amendment as outlined in DFARS 252.225-7006, 252.225-7012, and 252.225-7015. The response deadline for this opportunity is November 3, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Electrical Component SupplyThis subcontract, titled Electrical Component Supply, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. It is designated as a Total Small Business Set-Aside under NAICS code 334418. The contract focuses on the procurement of specialized connectors and high-grade wiring intended for prime contractors, specifically requiring compatibility with part number 20000120-3 and adherence to Glenair and Northrop Grumman specifications. A critical requirement of the agreement is strict compliance with DFARS 252.223-7008, which prohibits the use of hexavalent chromium. The supplier is responsible for delivering certified raw materials and components accompanied by all necessary Material Safety Data Sheets and appropriate hazard labeling. The solicitation was posted on October 19, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electrical Power Cable Assembly ManufacturingThis subcontract, issued by the DLA Weapons Support ASC Commodities Division, involves the manufacture of high-reliability electrical power cable assemblies under NSN 6150-01-516-5791. The contractor is responsible for fabricating assemblies to part number 20000120-3 in strict accordance with Glenair or Northrop Grumman specifications. Compliance with MIL-STD-129 for marking and MIL-STD-1916 for quality sampling is mandatory to ensure the finished and packaged products meet Department of Defense standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418. To be eligible, providers must maintain CMMC Level 2 certification and adhere to DFARS 252.225-7001 regulations. The solicitation was posted on October 19, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (P/N 60449-109)This subcontract involves the procurement and delivery of 10 nonmetallic hose assemblies, specifically Air Cruisers Company, LLC part number 60449-109, for the Defense Logistics Agency Weapons Support Fluid Handling Division. The items must adhere to Critical Application Item quality standards and be delivered to New Cumberland. The contractor is responsible for palletizing all shipments in accordance with RP001 DLA Packaging Requirements and submitting all necessary reports through the Wide Area Workflow system. This effort supports prime contractors on DLA supply contracts under NAICS code 334418.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Pin-Rivets (NSN 5320-01-441-2840)This subcontract, issued by the DLA Weapons Support ASC Commodities Division under the Department of Defense, requires the manufacture or procurement of 63 pin-rivets meeting NSN 5320-01-441-2840 and FSC 5320 specifications. The items are to be delivered to DLA Distribution Warner Robins at Robins Air Force Base. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418. The contractor must ensure strict adherence to packaging and marking standards as well as DFARS 252.204-7012 regulations. A critical requirement for this contract is the possession of CMMC Level 2 certification. Interested parties must have submitted their responses by the deadline of October 27, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

Solicitation N00164-18-Q-0040 was issued by the Naval Surface Warfare Center Crane Division for the manufacture and delivery of PC104+ Power Supply Systems, part number ACS-5161-50, in accordance with Drawing No. 4032AS1180 Rev. A. The Department of Defense intends to award a five-year, Firm-Fixed-Price, Indefinite-Delivery, Indefinite-Quantity contract on a sole source basis to The Parvus Corporation. This procurement is designated as a set-aside for Women-Owned Small Businesses and is justified under Statutory Authority 10 U.S.C. 2304(c)(1) and FAR 6.302-1(a)(2), as the government determined that only one responsible source can satisfy the requirements and that developing a new power supply would cause unacceptable cost and schedule delays. The contract specifies a minimum order quantity of 100 units and a maximum of 500 units over the five-year period. Delivery is required FOB Destination to NSWC Crane, where inspection and acceptance will occur. Interested parties were required to be registered in the System for Award Management and the Joint Certification Program to access controlled attachments. The solicitation was issued on February 13, 2018, with a closing date of March 15, 2018, and falls under NAICS code 334418.

General Info

Agency

Department Of Defense → Nswc Crane

Contract Value

$320,000

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

Set-Aside

NONE

Awardee

The Parvus Corporation 3222 S Washington St. SALT LAKE CITY UT 84115-3426 USA

Award Issued Date

06/01/2018, 12:00:00 AM UTC

Documents

Solicitation N0016418Q0040 - PC104+ Power Supply

rfp

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedFeb 13

Combined Synopsis

Justification (J&A)Jun 5

Justification & Approval published

AwardedJun 1

Contract was awarded

Submission Closed

06/01/2018, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Nswc Crane

Contacts1 person available

OfficeCRANE, IN, 47522-5001, USA

Organization / AgencyDepartment Of Defense → Nswc Crane

Office AddressCRANE, IN, 47522-5001, USA

Contacts

Ashley Bechtel

contact@example.gov

+1 (555) 000-0000

Full Description

N00164-18-Q-0040 - SOLE SOURCE - PC104+ POWER SUPPLY - FSC 5998 - NAICS 334418 Issue Date: 13 FEB 2018 - Closing Date: 15 MAR 2018 - 02:00 PM EST (EDT) This solicitation is being issued pursuant to the procedures of FAR 13/13.5. Solicitation Number N00164-18-Q-0040 is hereby issued as an attachment hereto. Naval Surface Warfare Center (NSWC) Crane intends to award a five (5) year, Firm-Fixed-Price, Indefinite-Delivery, Indefinite-Quantity contract on a sole source basis to The Parvus Corporation, 3222 S Washington St., Salt Lake City, UT, 84115-3426. The solicitation will be issued for the manufacture and delivery of Power Supply Systems, part number ACS-5161-50 in accordance with Drawing No. 4032AS1180 Rev. A. The minimum contract quantity is 100 and the maximum is 500. Delivery will be required FOB Destination to NSWC Crane with inspection and acceptance at Destination. This requirement will be negotiated on a sole source basis in accordance with Statutory Authority 10 U.S.C. 2304(c)(1), as implemented by FAR 6.302-1(a)(2), only one responsible source and no other type of supplies or services will satisfy agency requirements. The basis for restricting competition is the power supply is available from only one responsible source and no other type will satisfy agency requirements. The development of a new power supply would result in cost and schedule delays that are unacceptable to the Government. All responsible sources may submit a capability statement, proposal, or quote, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Contractors must be properly registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) in order to receive the controlled attachments. Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220 or via the internet at https://www.sam.gov. Information about the JCP is located at https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx. The controlled attachments will be posted to FedBizOps at the same time the solicitation is posted. FedBizOps may be accessed at http://www.fbo.gov. Questions or inquiries should be directed to Ashley Bechtel, Code 0233, telephone 812-854-6866, e-mail ashley.bechtel@navy.mil. Please reference the above solicitation number when responding to this notice.