Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 23, 2016. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Sole Source: Repair/maintenance of a Trumpf Trumatic L2530

Awarded
N39040-16-T-0231Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.
LE - Production - MPP

POSTED

about 5 hours ago

DEADLINE

in 8 days
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month

General Info

Contract Value

$0

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

KITTERY, ME, USA

Set-Aside

NONE

Awardee

TRUMPF INC

Award Issued Date

Documents

4

Hazardous Energy Control Contractor Compliance Certification

PDF, High priority: read this firstcertification
High

RFQ N39040-16-T-0231 - Trumpf Trumatic L2530 Maintenance

DOCX, High priority: read this firstrfq
High

16-T-0231_Request_for_Quote_Sheet_160721.doc

DOC

16-T-0231_Request_for_Quote_Sheet_160823.doc

DOC

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseAwarded
Posted

Combined Synopsis

Notice updated

Response deadline changed from Jul 29, 2016 to Aug 24, 2016. The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Portsmouth Naval Shipyard Gf
Contacts1 person available
OfficePORTSMOUTH, NH, 03801-5000, USA
Office AddressPORTSMOUTH, NH, 03801-5000, USA

Full Description

Show more
*************** Amendment 8/23/16: The following CLINs are added for unplanned parts and repairs: CLIN 0002 - Unplanned Parts & Repairs for the Trumpf Trumatic L2530 laser cutting machine, in accordance with the SOW. POP is 9/4/16-9/3/17. CLIN 1002 - Option 1: Year 2 of Unplanned Parts & Repairs for the Trumpf Trumatic L2530 laser cutting machine, in accordance with the SOW. POP is 9/4/17-9/3/18. CLIN 2002 - Option 2: Year 3 of Unplanned Parts & Repairs for the Trumpf Trumatic L2530 laser cutting machine, in accordance with the SOW. POP is 9/4/18-9/3/19. These CLINs will be Not to Exceed (NTE), and all parts and travel will be determined fair and reasonable prior to any work being accomplished

More opportunities from Department Of Defense → Portsmouth Naval Shipyard Gf

Same awarding agency

NAICS: 532490
New
Federal
Rental (1) 400 LPAC System- NLON- Groton, CT
Solicitation # N3904027Q3208
Portsmouth Naval Shipyard is soliciting firm fixed price quotes for the lease of one electric powered 100 HP Low Pressure Air Compressor (LPAC) with a 400 CFM capacity and an emergency stop feature to establish a tool air system. The place of performance is the Naval Submarine Base New London in Groton, Connecticut. This is a total small business set-aside under NAICS code 532490. The scope of work includes the equipment rental, start-up and commissioning, set-up and operation training, and associated freight. Additionally, the contractor is responsible for preventative maintenance and weekly inspections, with deliverables including a maintenance support plan, service reports, and technical operating instructions. The contract will be awarded based on best value, evaluating technical capabilities, adherence to the delivery schedule, and relevant experience with LPAC rentals within the last five years. Offerors must submit their quotes via email to William LeDuc III by November 9, 2026, at 10:00 AM ET. Submissions must include completed RFQ pricing pages, technical documentation demonstrating compliance with the statement of work, and a point of contact with a CAGE code and UEI. Payment will be processed through WAWF or GCPC for amounts up to 100,000 dollars. All equipment must be clearly tagged and marked, and packaging must adhere to ASTM-D-3951-18 standards.
Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 562991
New
Federal
PNSY- Sanitary Tank Cleaning
Solicitation # N3904027Q3160
Solicitation N3904027Q3160 is a total small business set-aside for the cleaning and sanitization of three sanitary tanks at the Portsmouth Naval Shipyard in Kittery, Maine. The government intends to award a firm-fixed-price purchase order for a period of performance running from February 8, 2027, to July 7, 2027. The scope of work includes pumping tank contents at least 400 feet from the submarine to temporary storage, utilizing methods such as hot water pressure washing, bacterial culture, or caustic soda, and the off-site disposal of all waste in accordance with federal, state, and local regulations. Contractors must provide a Technical Work Document, a planned schedule of work, and daily status reports. Award will be based on best value, evaluating technical acceptability and relevant experience, specifically requiring documentation of two projects involving sanitary tank cleaning completed within the last five years. Technical submissions rated as unacceptable will disqualify the entire quote. Quality acceptance is determined by PNSY Code 133 or 250 inspectors based on SSPC-SP 1 cleanliness standards and specific bacteriological limits for E.COLI and ENTEROCOCCI. Failure to pass inspection more than once results in a penalty of 5 percent of the total CLIN value. Invoicing must be processed through Wide Area Workflow, and all work must comply with NAVSEAINST 4350.2 and relevant safety and respiratory protection standards.
Septic Tank and Related Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
Federal
Notice of Intent to Sole Source Scrubbers & Burners Repair Services
Solicitation # N3904027NOI3182
The Portsmouth Naval Shipyard is issuing a sole source firm fixed price services contract to CEPEDA Associates for the repair, installation, and testing of proprietary CO2 scrubbers and CO-H2 burners. This requirement, identified under solicitation N3904027Q3182 and NAICS code 336611, is based on the statutory authority 10 U.S.C. 3204(a)(1) because CEPEDA Associates is the Original Equipment Manufacturer and the sole owner of the proprietary data, tooling, and processes required for the work. The scope of work is divided into two phases, beginning with the shipboard ripout, repair, and reinstallation of the equipment in accordance with NAVSEA technical requirements, with an additional option for the contractor to return for operational monitoring and deficiency adjudication. The performance period is scheduled from November 2, 2026, through July 29, 2027, with the place of performance located at Naval Base Point Loma in San Diego, California. To be considered for award, vendors must be registered in the System for Award Management and provide comprehensive pricing that includes a detailed breakdown of labor hours, categories, materials, and travel costs. The government will determine the fairness and reasonableness of the quote using historical price analysis and published price lists per FAR 12.204. All inquiries and submissions are directed to the point of contact, Alyssa Scarelli, with a response deadline of November 3, 2026.
Ship Building and Repairing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 532490
New
Federal
Rental of Propane Water Heater (600,000 BTU/hr) and associated components
Solicitation # N3904027Q3102
Portsmouth Naval Shipyard is soliciting quotes for the rental of one propane-powered water heater with a minimum output of 600,000 BTU/hr and associated components for use at Naval Base Point Loma in San Diego, California. This total small business set-aside under NAICS 532490 requires a frame or skid-mounted system equipped with lifting pad eyes, fork truck pockets, and a minimum 200-gallon external propane supply. The contractor is responsible for providing all necessary monitoring gauges, isolation valves, and safety features in compliance with ASME Boiler and Pressure Vessel Code Section IV and California emissions standards. The scope of work includes the equipment lease, freight, training, and comprehensive maintenance consisting of surveillance checks, weekly inspections, and repairs. The contract is a firm-fixed-price award based on the lowest price technically acceptable criteria, with the government reserving the right to award based on the ability to meet the required schedule. The base period of performance is from March 1, 2027, to May 31, 2027, with two optional one-month extensions available. Key deliverables include certification data reports, technical manuals, personnel rosters, and maintenance support plans, with electronic submissions managed through Wide Area Workflow. Additionally, contractors must adhere to strict Operations Security and Portable Electronic Device requirements to protect sensitive government information. Responses are due by November 3, 2026, and must include technical documentation of capabilities and past performance from the last three years.
Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

6 days ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS