Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on February 24, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Sole Source Synopsis - Refurbishment of Greno Industries Safety Valves

Closed
N4215823P0019Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.
LE - Production - MPP

POSTED

about 5 hours ago

DEADLINE

in 8 days
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Schenectady, NY, 12302, USA

Set-Aside

NONE

Documents

1

N4215823P0019 - Greno Industries Valve Refurbishment Synopsis

DOCX, Low prioritypresolicitation
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Norfolk Naval Shipyard Gf
Contacts1 person available
OfficePORTSMOUTH, VA, 23709-1001, USA
Office AddressPORTSMOUTH, VA, 23709-1001, USA
Contacts

Full Description

Show more
Synopsis: Naval Sea Systems Command (NAVSEA), Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract, to refurbish Greno Industries brand valves to Greno Industries Inc. This requirement is for commercial items as defined in FAR 2.101 and will be prepared in accordance with the information in FAR Subpart 13.5, as supplemented with the additional information included in this notice. The requirement will be awarded on a sole source basis. As the OEM, Greno Industries has the required parts, personnel, tooling and proprietary engineering data/drawings to refurbish the valves. For reinstallation in the Level I system, OEM replacement parts must be used and installed in accordance with OEM procedures. The NAICS code applicable to this procurement is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance with a size standard of 12.5 million dollars. The Product Service Code is J019. The period of performance for this acquisition is anticipated to begin 15 May 2023 and end 31 July 2023. This notice of intent is not a request for competitive proposals. It is not a solicitation or request for offers. No solicitation package is available. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Responses must be received no later than March 2nd, 2023 at 10:00AM EST via email to Kim Richardson, Contract Specialist at contact@example.gov. All responsible sources may submit a response which shall be considered by the Government. By submitting a response, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the response. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling +1 (555) 000-0000, or via the Internet at https://Sam.gov. Please direct all questions regarding this requirement to Kim Richardson, Contract Specialist at contact@example.gov and contact@example.gov. Contracting Office Address: Fleet Support Services Branch Norfolk Naval Shipyard Bldg. 65, 2nd Floor Portsmouth, VA 23709-5000 Place of Performance: Norfolk Naval Shipyard Primary Point of Contact: Kim Richardson, CONTRACT SPECIALIST contact@example.gov Phone: +1 (555) 000-0000

More opportunities from Department Of Defense → Norfolk Naval Shipyard Gf

Same awarding agency

NAICS: 532490
Federal
Rental of AC Unit with Heaters
Solicitation # NNSY-1200N-0005
Norfolk Naval Shipyard is conducting market research under FAR Part 10 to identify qualified sources for the rental of five 65-70 ton AC units with heaters. The government intends to award a Firm Fixed Price contract under NAICS code 532490. The scope of work includes a base period of one year with two additional option periods of three months and one month. Equipment must be delivered to Drydock 2 at Norfolk Naval Shipyard by January 11, 2027. Technical specifications require a minimum cooling capacity of 780,000 BTU/hr, a 30-degree temperature drop at 12,000 CFM at 5 inch static pressure, and power compatibility with 120VAC or 440VAC on a 400-amp circuit breaker with camlock end connections. Interested vendors must submit their capabilities statement, company details, and socioeconomic status to the designated point of contact by November 2, 2026, at 11 AM. Submissions must be in PDF format and include a technical submission document, model brochures or data sheets, and certification of full compliance with all specifications. Key requirements include providing protective coverings for saltwater air exposure, adhering to strict cleanliness standards, and ensuring all lifting attachments are marked and certified per NAVFAC P-307. Contractors must also comply with Federal and State OSHA requirements, specifically regarding Hazardous Energy Control and the Norfolk Naval Shipyard OSHE Program Manual.
Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 811310
Federal
Request for Information (RFI) on Scheduled Maintenance Services for Doosan Forklift
Solicitation # N42158-27-SIMACQ-5000004
The Norfolk Naval Shipyard CVN Industrial Repair Contracting Division is conducting market research to identify qualified vendors for scheduled maintenance services for five Doosan forklifts, specifically three D355C-9 and two D80S-9 models. The objective is to ensure safe operation and compliance with manufacturer recommendations. Interested contractors must provide recommended maintenance schedules based on operational hours or calendar intervals, as well as suggested parts replacements. This information will be used to develop a future formal solicitation and CLIN structure. The requirement falls under NAICS code 811310 for Commercial and Industrial Machinery and Equipment and is designated as a total small business set-aside. The anticipated contract will be a Firm Fixed Price agreement consisting of a 12-month base year and four one-year option periods, with an estimated start date of November 20, 2026. To participate in this RFI, respondents must submit a PDF capability statement not exceeding six pages, including relevant past performance from the last two years, their CAGE code, and an indication of whether they will act as a prime contractor or subcontractor. Submissions must be sent to Eugene Fenner by 07:00 AM EST on November 1, 2027.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

7 days ago

DEADLINE

in about 1 year
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS