Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SOUND CONTROLLING FELT

Active
SPE8E6-26-T-4173Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of unfaced fiberglass acoustic blanket insulation measuring 600 inches long by 72 inches wide and 2 inches thick, designed for sound control with a maximum temperature limit of 400 degrees Fahrenheit. The material is not woven, bonded with thread, resin-treated, or equipped with any attaching flanges, strips, or tabs. Vendors must provide a Health Hazard Assessment (HHA) approved by the Navy Marine Corps Public Health Center (NMCPHC) in accordance with MIL-DTL-32585, Paragraph 4.4.26.1. All technical and quality requirements referenced by R or I numbers must comply with the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The product must conform to TDP Revision B Gen 2, specified under MIL-DTL-32585A, and meet packaging, labeling, and marking standards including MIL-STD-129, MIL-STD-130N, and MIL-STD-147F. Packaging must follow DLA requirements: if hazardous per FED-STD-313, it must comply with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, but DLA requirements supersede ASTM. The unit of issue is RO (roll), with a quantity of 9 rolls, delivered FOB origin within 63 days. Inspection and acceptance occur at the destination. The delivery address is the DLA Distribution facility in New Cumberland, PA. A Certificate of Quality Compliance (CoQC) is required, and all documentation must align with CDRLs and the referenced Technical Data Package. The contract's solicitation number is SPE8E6-26-T-4173, with a response deadline of August 20, 2026, and the original delivery date set for November 1, 2026.

General Info

9 rolls of 600x72x2 inch fiberglass insulation, FOB origin, comply with MIL-DTL-32585A, delivered to New Cumberland, PA by Nov 1, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E6-26-T-4173 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
VINCENT NADER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SOUND CONTROLLING FELT
SOUND CONTROLLING F
Insulation, Acoustic, Fibrous Glass Acoustic, Blanket with Binder, Unfaced 600 IN. LG,72 IN. WIDE,2 IN. THK;
NOT WOVEN TOGETHER; NOT BOUND TOGETHER W/THD; 400 DEG F,MAX TEMP LIMITATION; NOT RESIN TREATED; NOT W/ATTACHING FLANGE,STRIP,OR TAB;
AT THE TIME OF OFFER VENDORS/MANUFACTURES MUST PROVIDE A HEALTH HAZARD ASSESSMENT (HHA) APPROVED BY THE NAVY MARINE CORPS PUBLIC HEALTH CENTER (NMCPHC). I/A/W MIL DTL 32585, PARAGRAPH 4.4.26.1
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
SPECIFICATIONS OR COMMERCIAL ITEM DESCRIPTIONS
(CIDS) MAY BE OBTAINED FROM THE WEB SITE
http://quicksearch.dla.mil/ http://quicksearch.dla.mil/
TDP Rev B Gen 2 IAW BASIC SPEC NR MIL-DTL-32585A(1) REVISION NR A DTD 02/01/2023 PART PIECE NUMBER: M32585TY2CL2FA 50FTX72INX2IN
TDP Rev B Gen 2
SPE8E6-26-T-4173
SECTION B
IAW REFERENCE QAP 13873 CDRLCOQC26124
REVISION NR DTD 12/04/2025
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE STD NR MIL-STD-130N(1) NOT 1 REVISION NR N DTD 08/26/2019 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017422196 0001 RO 9.000
NSN/MATERIAL:5640005423449
DELIVERY (IN DAYS):0063
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
SPE8E6-26-T-4173
SECTION B
PR: 7017422196 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/23/2026 Original Required Delivery Date:11/01/2026
SPE8E6-26-T-4173 NSN/Part Number: 5640-00-542-3449 Quantity: 9 RO Purchase Request: 7017422196QTY: 9 Delivery: 63 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336611
New
DIBBS
SPECTACLES, PROTECTIVE,
Solicitation # SPE2DS-26-T-324Y
Protective examination and treatment spectacles with a black lightweight nylon frame and a one-piece clear hardcoat scratch-resistant polycarbonate lens are being procured under NSN 6540-01-602-5323, with a quantity of one package containing twelve units. The spectacles are designed to absorb 99.9 percent of harmful UV light and feature molded-in side shields and browguards to provide added protection against UV radiation, dust, and flying particles. They include adjustable temples and lens inclination for user comfort and meet ANSI Z87.1-2003 safety standards. The unit of issue is packaged twelve per case and must comply with DLA packaging requirements and removal of government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision tied to the solicitation or award date depending on acquisition scale. This solicitation, identified as SPE2DS-26-T-324Y, was posted on August 9, 2026, with responses due by August 17, 2026, and requires delivery to Camp Pendleton, California, within five days of award. Bidders must specify the source and part number being supplied, and all relevant defense information controls apply. The contracting organization is the Department of Defense, Medical Supply Chain MD Surg FSF, through the DLA, with Kendall Jones as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336611
New
Federal
USS HIGGINS (DDG-76) 6C1 FARM OUT
Solicitation # N6264926RA059
The contract solicitation N6264926RA059, titled USS HIGGINS (DDG-76) 6C1 FARM OUT, seeks qualified contractors to perform ship repair, maintenance, and overhaul services on the United States Navy surface ship USS HIGGINS (DDG-76) at Commander, Fleet Activities Yokosuka in Kanagawa, Japan, in support of the U.S. Naval Ship Repair Facility and Japan Regional Maintenance Center. Work is defined by two Task Group Instructions covering various overhaul, preservation, and replacement activities, with all technical specifications, drawings, and task order instructions accessible exclusively through the DoD SAFE secure file-sharing platform. Interested parties must request access to ATTACHMENT (I), the work specification package, by emailing Contracting Officer Neil Flint at neil.s.flint.civ@us.navy.mil, as no other access method is provided. Proposals must be submitted no later than 13 JUL 2026 at 10:00am Japan Standard Time, and the anticipated performance period runs from 09 SEP 2026 to 02 MAR 2027. All submissions must comply with federal and defense acquisition regulations, including mandatory disclosures regarding hazardous materials under FAR 52.223-3 and DFARS 252.223-7001, and the use of sea transportation under DFARS 252.247-7022. Offerors must also indicate if their proposal includes a time limit and acknowledge any amendments to the solicitation in the comment section of their submission. The solicitation does not specify pricing, evaluation criteria, contract type, or detailed inspection and acceptance procedures, and no set-aside categories apply, making it open to all eligible entities.
Navsup Flt Logistics Ctr Yokosuka

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336611
New
Federal
Floating Dock and Gangway Supply and IntegrationThe contract requires the supply and integration of an 80-inch by 120-inch grey floating dock section along with an ADA-compliant gangway featuring direct connect hardware, designed to seamlessly interface with existing waterfront infrastructure. The system must support an adaptive launch system, ensuring functionality under varying water levels and environmental conditions while meeting accessibility standards for individuals with disabilities. All components must be engineered for durability, low maintenance, and long-term performance in a marine environment. Subcontractors must submit proposals by August 12, 2026, for this procurement managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. The NAICS code 336611 indicates the work falls under ship and boat building, emphasizing the technical specificity required in manufacturing and installation. Successful bidders will be responsible for ensuring full compatibility with current facilities, requiring detailed coordination and adherence to technical specifications for seamless integration without disruption to ongoing operations.
245-NETWORK Contract Office 5 (36C245)

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336611
New
Federal
Docking Regular Overhaul (DROH) for YC1584The contract pertains to a full dry-docking, inspection, and overhaul of Yard Craft YC 1584, encompassing comprehensive structural, mechanical, and systems-level refurbishment to restore operational readiness and extend service life. The work includes all necessary repairs, replacements, and upgrades required to meet naval standards, with emphasis on safety, reliability, and compliance with technical specifications. The project is classified as a Small Business Set Aside under the SBA program, encouraging participation from small business contractors, and is governed by NAICS code 336611 for shipbuilding and ship repair. The solicitation was posted on August 7, 2026, with a firm response deadline of September 8, 2026, at 3:00 PM. The contract is a subcontract under the Department of Defense, managed by Navsup Fleet Logistics Center Jacksonville, and the performance location is in Jacksonville, Florida, with a zip code of 32212. No specific point of contact is listed, and all submissions must comply with federal procurement rules for small business set-asides. This effort is part of the Navy’s ongoing vessel maintenance program to ensure fleet readiness and longevity of support craft.
Navsup Flt Logistics Ctr Jacksonville

POSTED

2 days ago

DEADLINE

in 30 days
View Details
NAICS: 336611
New
Federal
USS RUSHMORE (LSD-47) SRA 7C1
Solicitation # N6264926R0046
The notice pertains to maintenance and repair work for the USS RUSHMORE (LSD-47), involving eight specific tasks focused on the ship’s air conditioning and refrigeration systems, including the replacement of water control valves for both No.1 and No.2 A/C plant condensers, testing and repairing both refrigeration systems, and preserving the foundations of these systems located in compartment 3-29-0-E. The work is scheduled to occur between October 12, 2026, and July 31, 2027, at Commander, Fleet Activities Sasebo in Japan. The solicitation will be issued competitively by the NAVSUP Fleet Logistics Center Yokosuka Site Sasebo, limited exclusively to contractors holding an active Master Ship Repair Agreement or Agreement for Boat Repair within Japan. Only entities physically based in Japan and capable of demonstrating compliance with DFARS 252.225-7042 are eligible, and those without an existing MSRA or ABR in the region must commit to executing one before any award is made. Contractors outside Japan without clear proof of compliance will be disqualified. The solicitation number is N6264926R0046, with a response deadline of July 24, 2026, and primary contact information is provided through Akiko Ota at the U.S. Navy office in FPO, AP. This is a presolicitation notice only, not a request for proposals, and no contractual obligation arises from this announcement.
Navsup Flt Logistics Ctr Yokosuka

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336611
New
Federal
USS HIGGINS (DDG 76) 6C1 BUNDLE 3
Solicitation # N6264926RA044
This solicitation, identified as N6264926RA044 for the USS HIGGINS (DDG 76) 6C1 BUNDLE 3, is exclusively open to entities duly authorized to operate and conduct business in Japan under DFARS 252.225-7042. The work scope involves repair and maintenance activities aboard the vessel at Yokosuka Naval Base, with a defined period of performance from June 29, 2026, to December 8, 2026. All proposers must access the detailed work specifications, located in Attachment (I) under Section J, exclusively through the DoD SAFE secure file-sharing platform, requiring a formal access request submitted by May 13, 2026, to the designated U.S. Navy email addresses. Access to these files is time-limited to 14 days once granted. Proposals are due no later than May 20, 2026, at 10:00 AM Japan Standard Time, and must be submitted electronically via DoD SAFE, adhering to Microsoft Office Suite 2016 and Adobe Acrobat Reader 2017 compatibility standards, with all documentation in English. The evaluation process follows a Lowest Price Technically Acceptable (LPTA) methodology per FAR 15.103-2, assessing proposals on three non-ranked, pass/fail factors: Technical Acceptability, Past Performance, and Price. Only offers rated “Acceptable” in both Technical Acceptability and Past Performance will be considered for award, with selection based solely on the lowest evaluated price. Contract administration is governed by WAWF as the mandated invoicing system, with specific DoDAACs for payment processing including HQ0907 and N62649. The contract requires adherence to multiple NAVSEA Standard Items, including NSI 009-01, NSI 009-04, and NSI 009-60, alongside FAR clauses 52.246-2 and 52.246-4 for inspection and acceptance, which occur at the destination site—SRF AND JRMC Yokosuka. Special requirements include mandatory security clearances for personnel (T3/T3R investigations), compliance with 29 CFR 1915 for shipyard safety, extension of commercial warranties to the U.S. Government
Navsup Flt Logistics Ctr Yokosuka

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 336611
New
Federal
Yaquina Overhaul FY27
Solicitation # W9127N26BA029_
The U.S. Army Corps of Engineers, Portland District, is soliciting bids for a firm fixed price job order under an existing Master Ship and Repair Agreement to perform overhaul, maintenance, and repair work on the Dredge ESSAYONS, a 350-foot trailing arm suction hopper dredge built in 1984. All work must be completed at the bidder’s facility, with the Government responsible for delivering the vessel to the contractor and retrieving it upon completion. Successful bidders must have an active MSRA with the Portland District prior to award and are required to attend one of the scheduled site visits in July or August 2026 at either Astoria or Westport, Oregon, to be deemed eligible. Attendees must provide their own PPE compliant with EM 385-1 standards, and access to some locations may require a TWIC card. The Dredge will undergo critical inspections during this availability, including a Drydock Examination, Internal Structural Review, Annual Inspection, and renewal of the U.S. Coast Guard Certificate of Inspection, alongside endorsement of the ABS International Load Line Certificate. Bids must be submitted electronically via email to both point of contact individuals by August 17, 2026, at 2:00 PM Pacific Time, and must include the solicitation number W9127N26BA027 along with confirmation of bid validity for 90 days. No paper copies of the invitation for bid are available, and all submissions must follow the instructions outlined in the SF-33 form. The NAICS code for this procurement is 336611, and no set-aside is in effect. Contractors must be capable of meeting all technical and safety requirements for the overhaul, including passing dock and sea trials conducted by USACE personnel prior to vessel acceptance. Prospective bidders without an existing MSRA must contact Ian Lutjens to initiate the agreement process before bidding. The vessel’s specifications include a 68-foot molded beam, 108-foot overall beam with drag arms lowered, and a gross tonnage of 7,248 long tons, emphasizing the scale and complexity of the required repair work.
W071 Endist Portland

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336611
New
Federal
Preserve AFT AEM/S Mast
Solicitation # N264926R0050
The contract solicitation titled Preserve AFT AEM/S Mast seeks proposals for the preservation work on the aft AEM/S mast, with the solicitation number N264926R0050 issued by the Naval Supply Systems Command Fleet Logistics Center Yokosuka under the Department of Defense. Proposals must be submitted in strict accordance with Section L of the solicitation and received no later than September 3, 2026, at 01:00 UTC. The procurement is not subject to any small business set-aside and falls under the NAICS code 336611 for Ship and Boat Building and Repair. The place of performance is Sasebo City in Nagasaki Prefecture, Japan, with all communications and submissions directed to the designated point of contact, Jason Rankin, reachable by phone at 0956502873 or email at jason.m.rankin6.civ@us.navy.mil. The posting date for this opportunity is August 7, 2026, and interested parties must refer to the attached solicitation documents for full details and submission requirements.
Navsup Flt Logistics Ctr Yokosuka

POSTED

2 days ago

DEADLINE

in 24 days
View Details
NAICS: 336611
New
Federal
W91237-26-Q-A083 Bluestone Lake Boat Restoration Services
Solicitation # W9123726QA083
The U.S. Army Corps of Engineers, through its office in Huntington, West Virginia, is soliciting proposals for boat restoration services at Bluestone Lake under contract number W91237-26-Q-A083. This solicitation is designated as a Small Business Set Aside, total, meaning only small business concerns are eligible to compete, and the North American Industry Classification System code is 336611, which corresponds to boat building and repair services. The solicitation was posted on August 7, 2026, with a firm deadline for responses set for August 21, 2026, at 3:00 p.m. Eastern Time. Offerors must carefully adhere to all instructions provided within the solicitation documents, which include detailed requirements for the scope of restoration work, technical specifications, and submission procedures. The place of performance is Bluestone Lake, though specific location details are not outlined beyond the general site. Primary point of contact for questions and clarification is Kaylee Mills, reachable at 304-399-6965 or kaylee.p.mills@usace.army.mil, with James Holstein serving as the secondary contact at 304-399-5078 or james.m.holstein@usace.army.mil. The contracting agency operates under the Department of Defense, and all materials necessary to prepare a compliant offer are accessible via the PIEE system using the provided link. Submissions must fully comply with solicitation instructions, as failure to do so may result in disqualification. All work is expected to meet federal standards for environmental compliance, safety, and restoration quality, with potential requirements for documentation and inspection protocols not fully detailed in the summary but fully enumerated in the attached documents.
W072 Endist Huntington

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
USS HIGGINS (DDG-76) 6C1 Farm Out Bundle# 4, Yokosuka Japan
Solicitation # N6264926RA048
This contract is a firm fixed price solicitation issued by NAVSUP Fleet Logistics Center Yokosuka for repair and maintenance services aboard the USS HIGGINS (DDG-76) at Commander, Fleet Activities Yokosuka in Japan. The scope of work includes multiple specific structural and systems repair tasks such as corrosion repair on deck plating and bulkheads, replacement of vent piping, and maintenance of firemain and potable water systems, all detailed in Task Group Instructions attached to the solicitation. The period of performance runs from 17 August 2026 through 23 March 2027, with all proposals due by 10:00 AM Japan Standard Time on 28 May 2026. Only entities duly authorized to operate and do business in Japan as defined by DFARS 225.1103(3) may respond. Technical references and work specifications are distributed via DoD SAFE, and proposers must request access through designated Navy email contacts. The contract is evaluated under a Lowest Price Technically Acceptable (LPTA) methodology, with award going to the responsible offeror whose proposal meets minimum technical and past performance standards at the lowest evaluated price. Pricing details must be submitted in Attachment II, though the total contract value is not disclosed. The work requires strict adherence to NAVSEA Standard Items, SRF-JRMC Local Standard Items, and DoD security, safety, and environmental protocols, including compliance with 29 CFR 1915 for shipyard employment, preservation of historic structures at the naval base, and control of unclassified information under strict dissemination rules. All offerors must be registered in SAM with a valid UEI and CAGE code, and must complete required representations including size status and socioeconomic certifications through SAM. Proposals must include an active U.S. Navy MSRA or ABR certification, documentation of eligibility to operate in Japan, and fully completed attachments including the Proposal Breakdown Form, QASP, CDRL, and Government Furnished Property listings. Every contractor employee must pass a background investigation appropriate to their access level, ranging from NACI/T1 for general personnel to T5/T5R for privileged IT roles, and foreign nationals are prohibited from accessing ERP systems. The contractor is responsible for securing laydown space if needed, bearing all associated costs, and extending full commercial warranties to the Government at no extra charge. Invoicing must be conducted through Wide Area WorkFlow using the designated DoDAACs, with
Navsup Flt Logistics Ctr Yokosuka

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
REV-1(FO) Motor for No. One Refrigeration Plant Compressor; repair
Solicitation # N6264926Q0473
The solicitation seeks quotations for the repair of the REV-1(FO) Motor for No. One Refrigeration Plant Compressor, identified by solicitation number N6264926Q0473, issued by the Naval Supply Systems Command Fleet Logistics Center Yokosuka under the Department of Defense. The requirement is classified under NAICS code 336611 and carries no set-aside designation, making it open to all eligible vendors. Responses must be submitted in strict compliance with Section L of the solicitation document and received no later than August 10, 2026, at 1:00 AM UTC, as specified in Block 10 of the attached solicitation. The place of performance is Sasebo City, Nagasaki, Japan, with the contracting office located at FPO, AP 96349-1500, USA. Any inquiries regarding this solicitation should be directed to Jason Rankin, the primary point of contact, via email at jason.m.rankin6.civ@us.navy.mil or by phone at 0956502873. The solicitation was posted on July 15, 2026, and potential offerors are encouraged to review all attachments and submit proposals prior to the deadline.
Navsup Flt Logistics Ctr Yokosuka

POSTED

2 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 336611
New
Federal
USS HIGGINS (DDG-76) FY26 6C1 SRA BUNDLE 2, Yokosuka Japan
Solicitation # N6264926RA038
This solicitation, designated N6264926RA038, is issued by NAVSUP Fleet Logistics Center Yokosuka for the Surface Restricted Availability (SRA) of the USS HIGGINS (DDG-76) at Yokosuka Naval Base, Japan, with a revised Period of Performance from 17 August 2026 through 23 March 2027. Only entities holding an active U.S. MSRA or ABR as a prime contractor are eligible to respond, and firms must be duly authorized to operate in Japan under DFARS 252.225-7042; non-certified firms may apply but face a year-long certification process. The work scope includes repair and maintenance tasks defined in Task Group Instructions (TGIs) within Attachment I, accessible exclusively through DoD SAFE, requiring offerors to request access by 20 March 2026 with a 14-day window for download. The solicitation has undergone multiple amendments extending the closing date to 22 May 2026, revising the POP, updating Attachment IX Bundle 2 POP List R2, changing the WAWF document type from Invoice and Receiving Report (COMBO) to Invoice 2in1, removing the LPO DoDAAC, and adding DFARS 252.237-7023 for Continuation of Essential Contractor Services. Offerors must comply with FAR 52.223-3 and DFARS 252.223-7001 for hazardous material identification, DFARS 252.247-7022 for sea transportation disclosures, and provide explicit offer time limits. Contract administration details designate HQ0907 as the pay office and N62649 as the issuing DoDAAC, with invoicing conducted via WAWF using electronic submission methods. All contractor personnel require security clearances based on position sensitivity, including NACI or T3-equivalent investigations, active CACs, DISS profiles, annual cyber and OPSEC training, and adherence to strict onboarding timelines. The contract imposes requirements for condition found reports, integrated production schedules, compliance with NAVSEA and SRF-JRMC standards, and submission of quality assurance documentation per Attachment VII. No pricing data is available in Section B, and the contract type remains unspecified. Proposal submissions must be in English, use approved software formats
Navsup Flt Logistics Ctr Yokosuka

POSTED

2 days ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling
Other Scientific and Technical Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332312
New
DIBBS
Precision Cutting and Kitting Services
Fabricated Structural Metal Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
Cold-Finished Steel Flat Bar Supply
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
Rubber Seals and Gaskets SupplyThe contract is for the supply of nonmetallic special-shaped rubber sections intended for defense or industrial applications, requiring full manufacturing capabilities along with proper packaging and FOB Origin shipping in strict compliance with military specifications. The components, described as rubber seals and gaskets, must be produced to exacting standards to ensure performance in demanding operational environments. The work is subcontracted under NAICS code 326220, which classifies rubber product manufacturing, and is managed by the Department of Defense through its DDSP New Cumberland Facility, with performance required at the 17070-5002 location in New Cumberland. All deliveries must meet defined military criteria and be shipped from the manufacturer’s facility, placing responsibility for logistics and quality control squarely on the contractor. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is part of a broader procurement effort to support critical defense and industrial infrastructure needs.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Bar-Coding ServicesThe contract requires the provision of packaging, preservation, labeling, and bar-coding services for butterfly valves in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, including adherence to hazard communication requirements. All materials must be properly preserved to prevent damage during storage and transit, labeled according to military specifications, and barcoded for accurate tracking and inventory management throughout the supply chain. The work must be executed to meet the rigorous defense logistics protocols governing the handling and identification of military-grade components. This subcontract is issued by the Department of Defense through the DDS New Cumberland Facility, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. Responses are due by August 20, 2026, and the North American Industry Classification System code applicable to this solicitation is 493190, indicating it falls under other warehousing and storage services. The contract involves precise execution of defense logistics standards to ensure full operational readiness and traceability of butterfly valves within the military supply system.
Other Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract requires the performance and documentation of First Article Testing for butterfly valves, encompassing dimensional, material, and functional testing to ensure compliance with specified requirements. The successful bidder must deliver a detailed test report documenting all results, confirming that the valves meet all applicable standards and specifications before proceeding with full production. Testing must be conducted according to established protocols, with complete traceability and rigorous documentation to support validation. The solicitation is classified as a subcontract under NAICS code 541380 and is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at a location in NEW CUMBERLAND, Pennsylvania, with zip code 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. All submissions must be completed through the designated DIBBS platform prior to the deadline to be considered for award.
Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
Butterfly Valve Manufacturing and SupplyThe contract involves the manufacture and delivery of 23 butterfly valves to meet strict military standards, encompassing full production, rigorous quality control, proper packaging, and precise marking requirements. All work must adhere to the technical and compliance specifications mandated by the Department of Defense, ensuring the valves are suitable for defense applications. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where final delivery and acceptance will occur. The solicitation falls under the NAICS code 332911, classifying it as other fabricated metal product manufacturing, and is structured as a subcontract opportunity. The response deadline is August 20, 2026, with the solicitation posted on August 9, 2026, providing a 11-day window for potential vendors to submit proposals. The contracting activity is conducted through the DDSP New Cumberland Facility, a U.S. Department of Defense entity responsible for managing defense-related procurement logistics.
Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
Solenoid Valve Supply and DeliveryThe contract pertains to the supply, packaging, and delivery of a solenoid valve with National Stock Number 4810009927036, manufactured to meet stringent military specifications for integration into critical defense systems. The item must be delivered in full compliance with required performance, durability, and environmental standards appropriate for military applications, with packaging protocols ensuring integrity during transit and storage under demanding conditions. The contract is issued as a subcontract under the Department of Defense, specifically through the DDSP NEW CUMBERLAND FACILITY, with performance obligated at the New Cumberland location, zip code 17070-5002. The solicitation, classified under NAICS code 332912 for other fabricated metal product manufacturing, was posted on August 9, 2026, and responses are due by August 20, 2026. All offerings must be submitted through the DIBBS platform to be considered, and contractors are expected to adhere to defense procurement protocols without any set-aside provisions specified for small business or other socioeconomic categories.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Inspection SupportThe contract requires the performance of pre-shipment quality inspections to verify that products meet the stringent standards outlined in the DLA Master List, ASTM D3951, and MIL-STD-129 for marking and packaging compliance. These inspections are critical to ensuring that all items intended for military use are properly labeled, packaged, and documented in accordance with Department of Defense requirements. The work must be performed in alignment with established defense logistics protocols to guarantee readiness and reduce the risk of non-compliant shipments entering the supply chain. This subcontract is issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance centered at the New Cumberland location, zip code 17070-5002. The solicitation falls under NAICS code 541330, indicating it is related to professional, scientific, and technical services, specifically in the area of quality assurance and inspection support. Proposals must be submitted by the response deadline of August 20, 2026, following the posting date of August 9, 2026. All potential offerors should be prepared to demonstrate capability in executing precise, repeatable quality control processes under federal defense standards, with an emphasis on traceability, accuracy, and adherence to military specification requirements.
Engineering Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Transportation & Shipping of Regulated MaterialsThe contract entails the transportation and delivery of non-wood timber materials, including hazardous substances, to Department of Defense destinations within 35 days after contract award, strictly adhering to Defense Logistics Agency and DoD shipping regulations. All shipments must comply with federal standards for handling, labeling, and transporting regulated and hazardous materials, ensuring safety, traceability, and full documentation throughout the supply chain. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work falls under NAICS code 484220 for general freight trucking. This is a subcontract awarded by the DDSP New Cumberland Facility under the Department of Defense, with a response deadline of August 20, 2026, and a posted date of August 9, 2026. Bidders must be prepared to meet stringent compliance requirements for hazardous material transport, demonstrate proven capability in military logistics, and ensure on-time delivery within the 35-day window. The solicitation is accessible via the DIBBS platform and does not specify a set-aside status, meaning eligible contractors of any size may respond provided they meet all technical and regulatory stipulations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract involves the preparation and submission of hazard warning labels and Safety Data Sheets for hazardous materials that are not regulated under FIFRA or FDA, ensuring full compliance with OSHA standards and DFARS requirements. This work is critical for maintaining safety and regulatory adherence in environments where chemical handling and storage are subject to federal workplace safety mandates. The services required include accurate classification, labeling, and documentation of hazardous substances to support safe transport, handling, and use by personnel across Department of Defense operations. The contract is classified as a subcontract under NAICS code 541690, and it is associated with the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. Performance is required at the location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026. While no specific set-aside designation or point of contact is provided, the urgency and specificity of the compliance requirements necessitate a contractor with demonstrated expertise in hazardous materials documentation, OSHA labeling protocols, and defense acquisition regulations.
Other Scientific and Technical Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 321999
New
DIBBS
Non-Wood Timber/Lumber SupplyThe contract requires the supply of 800 units of non-wood timber/lumber identified by NSN 5675015914344, with strict adherence to DLA packaging, marking, and hazardous material labeling standards to ensure compliance with military logistics protocols. This subcontract is issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance required at the location in NEW CUMBERLAND, PA, zip code 17070-5002. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026. The NAICS code 321999 indicates this falls under other wood product manufacture, though the product itself is non-wood, suggesting a specialized industrial classification. All deliveries must meet the defined DLA specifications without exception to maintain supply chain integrity and safety standards.
All Other Miscellaneous Wood Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details