South Sacramento County Streams Project Flood Damage Reduction Group Florin Creek from Franklin Blvd to Highway 99

JOB DESCRIPTION: The Florin Creek Project from 150 feet downstream of Franklin Blvd. to Highway 99 will consist of the following elements: Channel widening of Florin Creek, within the limits of the existing right-of-way and surrounding development. Raising the upstream and downstream parapets of the Persimmon Avenue bridge box culvert. Construction of retaining walls on portions of the north bank between Persimmon Avenue and Highway 99. A 255-foot retaining wall is required from Persimmon Avenue extending east to provide sufficient width for the bike trail and a 165-foot long sheet pile wall is required along the bike trail from theLa Mancha Way culvert extending west to increase the bottom width of the channel. Short retaining walls are required on the downstream side of Persimmon Avenue and at the southeast corner of the box culvert to prevent water from leaving the channel through localized low areas in the banks. Low flow concrete invert channel lining and full channel paving at bridge/culvert crossings. The full channel paving will extend a minimum of 25- feet in each direction from the structures at Franklin Blvd., Brookfield Drive, Center Parkway and Persimmon Avenue. Acquisition Information: This acquisition is proceeding as a Request for Proposals (RFP) using the Low Price Technically Acceptable (LPTA) Method. This RFP is a Competitive, 8(a) Set-Aside and THIS PROJECT IS LIMITED TO 8A CONTRACTORS. ALL OTHER FIRMS ARE DEEMED INELIGIBLE TO SUBMIT OFFERS. Estimated Cost Range is between $5,000,000 $10,000,000 Period of Performance for Construction: 565 Days This Procurement will be conducted under FSC CODE: Y1PZ, SIC CODE: 1629, NAICS Code: 237990. The size standard for this code is $33,500,000. All questions should be directed to the Contract Specialist, Marsha Sells, at (916) 557-5232, FAX: No.: (916) 557-5278, e-mail marsha.r.sells@usace.army.mil. Information about the time and location of the site visit/pre-proposal conference will be found in Section 00 21 00 of the solicitation. If you need assistance with downloading the plans or specs or registering as an Interested Vendor, please contact the Contract Specialist. It is anticipated that the RFP will be issued on or about August 13, 2014, for downloading at the Government's website at http://www.fedbizopps.gov/. No paper copies will be issued. The specific date and time will be identified in the solicitation. OFFERORS ARE ADVISED THAT THIS PROJECT MAY BE DELAYED, CANCELED OR REVISED AT ANY TIME DURING THE SOLICITATION, SELECTION, EVALUATION, NEGOTIATION AND/OR FINAL AWARD PROCESS. ORDERING SOLICITATION: Plans and specifications will NOT be provided in hard paper copy or CD-ROM format. The solicitation and all amendments for this acquisition will be posted on a secure Government website known as FedBizOpps (www.fbo.gov) once the RFP is issued. Viewing/downloading documents from FedBizOpps will require prior registration in System for Award Management (www.sam.gov). If you are a first-time FedBizOpps user, you will also be required to register in FedBizOpps (www.fbo.gov) before accessing the RFP documents. To register, click on the Register Now button in the Vendors Block and follow the instructions. The following information will be required: Marketing Partner Identification Number (MPIN); DUNS Number or Cage Code; Telephone Number; and E-mail Address. Once registered with FedBizOpps, interested parties will then be able to log in and access the RFP documents. Important Note: Solicitation documents can be accessed ONLY via FedBizOpps. Please note that ALL contractors who want to register with FedBizOpps must be SAM registered, and have a MPIN, DUNS number or Cage code. For further information, please click on the FedBizOpps homepage link and the Vendor User Guide. The only PLAN-HOLDER'S/BIDDER'S LIST now available is via FedBizOpps. When viewing the Synopsis/Pre-solicitation Notice, you will click on the 'ADD ME TO INTERESTED VENDORS' to enter your information. This function does not, however, allow you to identify yourself as a Prime or Sub. It is recommended that you identify your category in parentheses at either the beginning or end of your company name. For example: (Prime/Sub) XYZ Construction, or XYZ Construction (Prime/Sub). IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO CHECK FEDBIZOPPS FREQUENTLY FOR ANY AMENDMENTS OR CHANGES TO THE SOLICITATION.