This Combined Synopsis/Solicitation opportunity from Department Of Homeland Security was posted on July 18, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SPECIAL PURPOSE CRAFT - ICE RESCUE TRANSPORT Second Generation (SPC-IRT II)

Closed

70Z02324R73100001Federal

Submission Closed08/09/2024, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336612

New

DIBBS

Supply of Marine Navigational Lights (NSN 6220-00-050-6743)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PANEL FLOOR SECTION, WA

Solicitation # SPE7M4-27-T-0601

Solicitation SPE7M4-27-T-0601 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 27 units of watercraft panel floor sections, identified by NSN 2040016575748 and part number 1630018. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania with a delivery timeline of 403 days after order. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and environmental standards, including the prohibition of intentionally added mercury and Class I ozone-depleting substances. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. This solicitation is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Quotes must be submitted via the DLA Internet Bid Board System by December 31, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-453Q

Solicitation SPE7M4-26-T-453Q is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 90 units of deck lashing gear, identified by NSN 2020007891065. The items are classified as critical application items and must be manufactured using a forging process, which requires specific tooling. Technical and quality requirements are governed by the DLA Master List, and the items must conform to TDP Rev A Gen 1 based on drawing 53711 1313817 and 53711 1313818 Revision C. The required delivery date is December 1, 2027, with delivery and inspection occurring at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a specific requirement to avoid plastics for wrapping and dunnage where possible. Environmental restrictions prohibit the intentional addition of mercury and the use of Class I ozone-depleting chemicals. Offers produced via additive manufacturing are ineligible for award. The procurement is subject to the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards. Invoicing must be processed electronically through Wide Area WorkFlow. Quotations are due by October 9, 2026, and a price evaluation preference may be applied to certified HUBZone small business concerns.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Shafting and Rudder Maintenance

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Cathodic Protection (Zinc Anodes)

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Shipyard Haul-out and Docking Services

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Navy Shipboard Rack Curtain Manufacturing

DLA Maritime - Portsmouth

POSTED

DEADLINE

Commercial Shipyard Welding and Fabrication ServicesThe Commercial Shipyard Welding and Fabrication Services subcontract involves providing high-specification welding, brazing, and fabrication for prime contractors supporting NAVSUP FLCY shipboard projects in Yokosuka. The scope of work includes the fabrication and inspection of pressure vessels, fillet welds, and brazed piping systems, utilizing high-heat input procedures and Post Weld Heat Treatment. All deliverables must adhere to strict industry standards, including AWS, ABS Steel Vessel Rules, and ASME BPVC Section IX. The selected provider is responsible for delivering certified welded assemblies along with comprehensive inspection reports to the Department of Defense.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Marine Grade Base Metals and Welding Consumables SupplierThis subcontract opportunity with the Department of Defense, managed by the Navsup Fleet Logistics Center Yokosuka, seeks a supplier for commercially stocked base metals and welding consumables to support prime contractors on NAVSUP FLCY maritime projects. The selected provider will be responsible for identifying and recommending S-Group base metals and A-Group filler metals in accordance with specific reference tables, ensuring all materials are compatible with NAVSEA welding standards. The scope of work includes the delivery of a detailed material suggestion list accompanied by technical specification sheets, JIS standards, and operational usage data. Interested parties must submit their responses by November 20, 2026, for performance in Yokosuka.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

USCG Response Boat Small Third Generation (RB-S III)

Solicitation # 70Z02326R93250001

The United States Coast Guard is soliciting proposals for the Response Boat Small Third Generation (RB-S III) program to recapitalize its aging fleet of 29-foot RB-S II platforms. This total small business set-aside acquisition is a commercial Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract utilizing a combination of Firm-Fixed-Price and Fixed Price with Economic Price Adjustment CLINs. The scope includes the design, production, testing, and delivery of up to 410 boats and associated purpose-built trailers, along with logistics support, technical documentation, and crew familiarization. The anticipated ordering period is ten years, consisting of a two-year base period and an eight-year option period. The procurement employs a two-phase competitive down-select process. In Phase I, the government will evaluate written proposals based on mission effectiveness, production and management, and price to select up to four IDIQ contractors. Each selected offeror will receive an initial delivery order to build one demonstrator boat and trailer. In Phase II, these contractors will participate in a 90-day in-water demonstration to evaluate performance. Following this independent evaluation, one contractor will be selected to receive all subsequent production delivery orders. Phase I proposals are due by 1400 Eastern Time on November 13, 2026, and must be submitted electronically via the DoD Secure Access File Exchange.

POSTED

DEADLINE

Solicitation # N0010426QFF51

Solicitation N00104-26-Q-FF51, issued by NAVSUP Weapon Systems Support, is for the procurement of a Thru-Hull Connector (NSN 2040-01-408-2691). This item is designated as Level I Special Emphasis material because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or the loss of the vessel. Due to this criticality, the contract mandates rigorous quality control, including First Article Testing and a zero-defect lot acceptance policy. The hardware must be manufactured according to CPG 1025 specifications, utilizing QQ-N-286 material for the body, nut, and washers, with strict prohibitions against the use of molybdenum disulfide thread lubricants and mercury. The contractor is required to provide extensive objective quality evidence, including quantitative chemical and mechanical analyses, non-destructive testing, and hardness tests. All certification data and test results must be submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. Additionally, any required welding or brazing must follow specific Navy standards, with procedures and qualification data approved by the government in advance. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted more heavily than price.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Fixed Height Work SurfacesThis subcontract involves the supply of 148 fixed-height work surfaces for prime contractors working on Department of National Defence projects at the Royal Canadian Armoured Corps School. All provided units must adhere to the technical specifications outlined in Annex A and the Category 2 Product Builder, and must be approved under the Workspaces Supply Arrangement E60PQ-140003. The contract requires the delivery of these compliant work surfaces to CFB Gagetown in New Brunswick, Canada. The solicitation was posted on October 16, 2026, with a response deadline of October 27, 2026.

Department of National Defence

POSTED

4 days ago

DEADLINE

in 7 days

AI Contract Overview

The Department of Homeland Security, through the Coast Guard Hq Contract Operations, issued solicitation 70Z02324R73100001 for the procurement of Special Purpose Craft - Ice Rescue Transport Second Generation (SPC-IRT II) boats. These vessels are designed to replace aging Special Purpose Craft - Airboat (SPC-AIR) platforms and standardize boats assigned to long-haul ice rescue units. The SPC-IRT II is intended for deployment within the Ninth Coast Guard District Area of Responsibility to perform Search and Rescue, Living Marine Resources, and Other Law Enforcement missions. These operations occur during both day and night in diverse maritime climates, including sub-freezing temperatures, inland environments, and coastal environments. The craft must be capable of projecting Coast Guard capabilities in ice environments and are required to have a 10-year service life while complying with environmental regulations. This procurement was designated as a Total Small Business Set-Aside under NAICS code 336612. The contract follows a Firm Fixed Price structure with a proposed period of performance from September 2024 to September 2025. Delivery of the craft is specified for stations located in Wisconsin and Ohio. The award for this effort was granted to 1000 Island Airboats LLC in the amount of 983,800.00. The scope of the procurement includes the SPC-IRT II equipment and related services, as well as SANS/GIAC cybersecurity training courses and exams.

General Info

Agency

Department Of Homeland Security → Hq Contract Operations (CG-912)(000

Contract Value

$983,800

NAICS

336612 - Boat Building

Place of Performance

DC, USA

Set-Aside

SBA

Awardee

1000 ISLAND AIRBOATS LLC

Award Issued Date

09/10/2024, 12:00:00 AM UTC

Documents

RFP 70Z02324R73100001 - Attachment 3 Price Schedule

3 pages · specifications

High

RFP 70Z02324R73100001 - USCG Small Craft Procurement

rfp

High

SPC-IRT II Requirements Document (May 2024)

sow

High

Past Performance Questionnaire

4 pages · past-performance

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJul 18

Combined Synopsis

Response DeadlineAug 9

Deadline has passed

Submission Closed

08/09/2024, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Hq Contract Operations (CG-912)(000

Contacts2 people available

OfficeWASHINGTON, DC, 20593, USA

Organization / AgencyDepartment Of Homeland Security → Hq Contract Operations (CG-912)(000

Office AddressWASHINGTON, DC, 20593, USA

Contacts

Joel Gibney

contact@example.gov

William E. Lewis

contact@example.gov

+1 (555) 000-0000

Full Description

Please see attached solicitation labeled SPC_IRT II Combined SS 70Z02324R73100001 Description of Effort: The Coast Guard Special Purpose Craft - Ice Rescue Transport Second Generation (SPC-IRT II) boats are set to replace the Special Purpose Craft - Airboat (SPC-AIR) boats which have exceeded their service lives. The SPC-IRT II is intended to standardize boats assigned to long-haul ice rescue units. The SPC-IRT II shall be deployed from and operated in the Ninth Coast Guard District (D9) Area of Responsibility (AOR) to perform all assigned missions. Assigned missions include: - Search and Rescue (SAR) - Living Marine Resources (LMR) - Other Law Enforcement (OLE) These missions shall be performed during daytime and nighttime conditions in a wide spectrum of maritime climates and environmental situations. These maritime climates and situations include but are not limited to: - Sub-Freezing Temperatures - Inland Environments - Coastal Environments The SPC-IRT II shall be a Coast Guard standard boat platform capable of performing missions that require the projection of CG capabilities in an ice environment.