Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Specialty Pool Fixture Handling and Reinstallation

Active

State & Local

Response Deadline08/14/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the careful removal, secure storage, and precise reinstallation of specialized pool fixtures including diving boards, starting blocks, handrails, drain grates, and pole holes in preparation for and following flooring renovation work. All tasks must be executed with attention to structural integrity and safety, ensuring that each component is handled to prevent damage and restored to its original functional condition. The work requires skilled labor familiar with pool infrastructure and the unique challenges of preserving and reinstalling fixed aquatic equipment during construction activities. This subcontract opportunity is issued under NAICS code 238990 and is open for responses until August 14, 2026. The contracting entity is listed as Utah, with no specific agency or office address provided. The opportunity is posted on the Utah BonfireHub platform and is not classified under any set-aside program. Bidders must be prepared to adhere to precise handling protocols and timeline requirements to meet the project’s renovation schedule without disrupting pool operations beyond the designated work window.

General Info

Remove, store, and reinstall pool fixtures safely during flooring renovation by August 14, 2026, in Utah.

Agency

UtahView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 11:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUtah

ContactsNo contacts available

OfficeN/A

Organization / Agency

Utah

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Careful removal, secure storage, and reinstallation of diving boards, starting blocks, handrails, drain grates, and pole holes during flooring renovation.

Similar Contracts

Same NAICS industry code

Elevator Preventive Maintenance and Major Repairs ServicesThis contract, solicitation W912CN-26-Q-A031, seeks a Firm-Fixed-Price provider to deliver comprehensive elevator and chairlift preventive maintenance, repair, testing, inspection, and certification services across U.S. Army installations on Oahu, Hawaii, primarily at Schofield Barracks. The work is non-personal services in nature, meaning the contractor operates independently without government supervision, but remains fully accountable for meeting all standards outlined in the Performance Work Statement, including compliance with ASME A17.1, ASME A18.1, OSHA, and all federal, state, and local regulations. The contract covers a base period from September 1, 2026, through August 31, 2027, with four optional one-year periods and a potential six-month extension, creating a possible performance period extending to August 2031. The scope includes maintaining a detailed inventory of elevators and chairlifts across UPH barracks and non-UPH administrative facilities, requiring adherence to manufacturer-recommended preventive maintenance schedules and annual test dates as documented in the Technical Exhibits. The contractor must supply all personnel, tools, equipment, parts, and transportation necessary to perform these services, including providing all replacement parts for both Preventive Maintenance Orders and Demand Maintenance Orders. Offerors must submit a complete, non-partial quotation that includes detailed general information such as UEI, CAGE code, SAM.gov registration status, business size classification, and payment terms; a technically acceptable narrative not exceeding ten pages demonstrating understanding of the scope, including certification documentation for the Project Manager and all key technicians—specifically valid Hawaii elevator mechanic licenses and NAESAs Qualified Elevator Inspector certifications—a staffing and management plan capable of handling concurrent task orders across the Garrison, a baseline preventive maintenance schedule mapped to historical test dates, and at least two relevant project examples from the past three years involving similar elevator and chairlift maintenance without modernization. Pricing must be submitted for all contract line items except CLINs 0008–0009 and their options (now renumbered to X010 and X011), which are designated Not-Separately-Priced (NSP) and will be negotiated on a firm-fixed-price basis at the task order level. The total evaluated price includes the base period, all four option years, and the potential six-month extension under FAR 52.217-8, with one-half of the option price added

0413 Aq Hq Rco-Hi

POSTED

about 4 hours ago

DEADLINE

Security fence at Coast Guard Air Station Clearwater FloridaThis solicitation is for a firm fixed-price construction contract to remove approximately 400 feet of existing fence and install approximately 270 feet of new 8-foot industrial fencing with barbed wire at the USCG Air Station Clearwater in Florida. The project includes the installation of three gates: a large non-powered gate with a cipher lock, a 60-inch-wide swing gate suitable for commercial lawn mower access, and a 26-foot-wide powered sliding gate with an electronic pin pad for entry and exit. All existing fence posts and concrete footings must be completely removed and the areas backfilled. The contractor is responsible for coordinating vehicle relocation near the fence with the unit, and the new fence will not extend beyond a small bridge at the lot corner. Work must be performed Monday through Friday between 8 a.m. and 3 p.m., with no weekend or holiday work authorized. The solicitation is a total small business set-aside under NAICS code 238990 with a size standard of $19 million in annual receipts, and only vendors registered in SAM with an active status and the correct NAICS code are eligible to respond. Quotes are due by 3 p.m. on 14 August 2026 and must be emailed to Jerry.Lopez@uscg.mil. The government will award based on lowest price, technically acceptable criteria, with anticipated award on 28 August 2026 and performance beginning no later than 10 business days after award. A required site visit was held on 29 July 2026, and vendors must ensure personnel have government-issued ID for access. All work must comply with applicable FAR clauses including 52.236-2 on differing site conditions, 52.236-5 on material and workmanship (materials must be new and of suitable grade), 52.236-7 on permits and responsibilities, and 52.236-13 on accident prevention and OSHA compliance. Wage determination FL20260266 mandates Davis-Bacon prevailing wages for laborers and mechanics, and contractors must flow these requirements down to all subcontractors. Additionally, the contract incorporates clauses addressing DEI discrimination, prohibition of contracts with corporate expatriates, and compliance with federal labor standards including paid sick leave and federal contractor minimum wage requirements. Contractors must submit tax ID and UEI information and are subject to default provisions if work is not

Base MIAMI(00028)

POSTED

about 4 hours ago

DEADLINE

5660--DESIGN-BUILD CONSTRUCTION FOR UPGRADE PERIMETER SECURITY VA MEDICAL CENTER (VAMC), MARTINSBURG, WVThe Department of Veterans Affairs, through its Office of Construction & Facilities Management, is seeking a Design-Build contractor to upgrade perimeter security at the Capital Region Readiness Center located at the VA Medical Center in Martinsburg, West Virginia. This 100% Service-Disabled Veteran-Owned Small Business set-aside solicitation requires the contractor to design and install a comprehensive perimeter security system including fencing with anti-climb and anti-ram features, guard gates, bollards, and anti-ram vehicle barriers in strict compliance with the VA Physical Security and Resiliency Design Manual and VA Technical Information Library. The work encompasses full site verification including surveying and underground utility detection, along with all labor, materials, equipment, and installation necessary to meet federal security standards. Proposals must be submitted in two electronic PDF volumes—Volume I containing administrative and contractual documents, and Volume II detailing technical approach, past performance, and key personnel—following strict formatting, naming, and page limitations to avoid rejection. All submissions must be emailed to designated VA contracting officials by the deadline, with no exceptions to solicitation terms permitted within proposal volumes. Volume II is structured into three evaluation factors ranked in descending importance: Organizational/Technical Approach & Schedule, Past Performance, and Key Personnel. For the technical approach, offerors must demonstrate a clear, concise plan for managing design and construction activities with a detailed organizational chart, subcontractor roles and teaming agreements, and an enforceable quality control system including inspection and submittal registration controls. The contractor must perform at least 20% of the total work with its own forces as mandated by FAR 52.236-1. Past performance must include two to five recent projects of similar scope and complexity, each valued over $1 million, with verified experience in perimeter fencing, anti-ram barriers, and bollard systems, along with documented work on electrical substations and generator yards. Offers must provide completed Past Performance Questionnaires or CPARS evaluations and clearly state subcontractor contributions and teaming commitments. Key personnel requirements are stringent: the Project Superintendent and Project Manager must each have ten years of construction experience, the CQC System Manager must hold a relevant degree or PE license with four years of experience or eight years of on-site experience including one year in quality control, and the Site Safety and Health Officer must meet EM 385-1-1 standards with ten years of safety experience, five years in heavy construction on electrical facilities, OSHA 30-hour certification, and 24 hours of

Office Of Construction & Facilities Management (36C10F)

POSTED

about 4 hours ago

DEADLINE

Repair Parking Area at the Grayling Air to Ground RangeThis solicitation, numbered W50S8626BA003, is a Firm Fixed Price invitation for bids issued under the Revolutionary FAR Overhaul to acquire commercial construction services for the repair of the Range Parking Area at the Grayling Air-to-Ground Gunnery Range in Frederic, Michigan. The requirement is set aside 100% for small businesses under NAICS code 238990, with an estimated contract value between $500,000 and $1,000,000. The contractor must furnish all personnel, equipment, materials, supervision, and quality control to complete the work in strict accordance with engineering design drawings and specifications, including construction of parking areas, erosion control systems, and stormwater infrastructure. Delivery and acceptance of the completed work will occur at the Grayling site, though all bids must be physically submitted by the deadline of 13 August 2026 at 11:00 AM Local Time to the bid box located at Alpena CRTC, Building 2022, as electronic submissions are prohibited. The period of performance is 365 calendar days after issuance of the Notice to Proceed, with an initial work start anticipated in August 2026. A single, mandatory site visit is scheduled for 28 July 2026 at the Grayling range; no other visits will be permitted. All questions must be submitted in writing by 5 August 2026 and will be answered via SAM.gov. The contract incorporates numerous FAR and DFARS clauses modified under Deviation 2026-O0038, including requirements for security compliance, quality control, site safety, and material standards such as MIL-STD-129 and MIL-STD-130, which dictate unique item identification via data matrix symbols and weather-protected labeling. Key personnel—including a project manager, site superintendent, quality control manager, and safety manager—must meet stringent experience criteria, and substitutions require prior written approval. All personnel must be U.S. citizens or legal residents, pass criminal background checks, carry government-issued photo identification, and comply with HSPD-12 and FIPS PUB 201 standards, including completion of AT Level I Awareness Training for access to National Guard installations. Contractors are subject to vehicle and personal searches, strict access controls, and mandatory safety attire while on-site. Invoicing must be conducted exclusively through WAWF, with

W7NF Uspfo Activity Miang Crtc

POSTED

about 4 hours ago

DEADLINE

Installation of Electric High Tensile Wire FencingThis solicitation, identified as 1232SA26Q0939, is a combined synopsis and request for quotation issued under FAR Part 12 for the installation of electric high tensile wire fencing at the Prairie du Sac Agricultural Research Station in Wisconsin. The acquisition is a total small business set-aside under NAICS code 238990, with a small business size standard of $19 million, and is intended for award as a firm-fixed-price purchase order with an estimated value between $250,000 and $500,000. The work involves preparing and fencing Fields 1–3 as the base requirement, along with three optional areas that may be exercised after award, each tied to a separate contract line item number. The scope includes demolition and disposal of all existing fencing and debris, installation of five-strand perimeter fencing and three-strand interior fencing using wooden posts, and compliance with detailed specifications for hog wire fencing, electrical grounding systems, and utility coordination. Shop drawings and quality control documentation must be submitted for approval prior to installation, and all work must conform to specific material standards, with substitutions requiring prior written approval from the Contracting Officer. The solicitation is evaluated using the Lowest Priced Technically Acceptable (LPTA) method, where offerors must pass mandatory technical acceptability and past performance gates before price is considered. Technical acceptability requires full compliance with the Statement of Work, specifications, and all contract clauses, while past performance is deemed unacceptable if any negative evaluations exist within the last five years, including terminations for default, marginal or unsatisfactory ratings exceeding 10% in any CPARS category, or unsatisfactory reference responses. Quotations must be submitted via email to the designated USDA address by 10:00 AM local time on August 7, 2026, and must include a transmittal letter with the offeror’s SAM UEI, tax ID, and point of contact. A completed SF 24 bid bond is required, and selected offerors must be prepared to furnish performance and payment bonds. The contract includes numerous FAR and AGAR clauses covering labor standards, wage requirements, whistleblower protections, anti-trafficking, cybersecurity, and contract administration, with additional requirements for on-site supervision, safety compliance with OSHA, certified payroll records, and adherence to a 180-day performance window following award. All invoices must be submitted in original and copy form to both

USDA Ars Afm Apd

POSTED

about 4 hours ago

DEADLINE

RFP 26-19769-YB Services for Various Mechanical, Electrical, Welding, and MachinistThe City of Lubbock, Texas, is soliciting services for a broad range of mechanical, electrical, welding, and machinist work under RFP 26-19769-YB. The opportunity is open to qualified vendors and is targeted toward state, local, and educational government entities, with responses due by August 12, 2026. All work is expected to be performed within Lubbock, Texas. The solicitation is managed by the city’s purchasing department, with primary contact points including Yolanda Busby and Marta Alvarez, the Director of Purchasing, along with Teofilo Flores as the Assistant Director. Interested parties must submit proposals through the Texas SmartBuy portal before the deadline, and all communications should be directed to the provided email addresses and phone numbers. The solicitation does not specify a set-aside classification or NAICS code, leaving eligibility open to all qualified responders.

CITY OF LUBBOCK

POSTED

about 18 hours ago

DEADLINE

General Subcontractor Management and CoordinationThe contract entails comprehensive oversight and coordination of multiple subcontractors across various operational domains including scheduling, logistics, safety, and quality control. The scope requires active management to ensure seamless integration of subcontractor activities, timely project progression, adherence to safety protocols, and consistent delivery of high-quality work standards. The effort is centered around maintaining alignment among all parties involved to meet project objectives without direct supervision of the primary contractor. This opportunity is classified under NAICS code 238990 and is open for responses until August 24, 2026. It is issued by the State of Utah under a subcontract arrangement, with no set-aside provisions specified. All work is expected to be performed within Utah, though exact location details are not provided. Interested parties must engage through the designated online portal to submit proposals by the deadline.

POSTED

about 19 hours ago

DEADLINE

Selective Demolition and Site PreparationThe contract titled Selective Demolition and Site Preparation is a subcontract issued by the Cobb County Board of Education in Georgia, aimed at removing existing building components and systems to ready the site for new mechanical, electrical, and architectural installations. The work involves carefully dismantling and extracting outdated or incompatible infrastructure to ensure a clean, safe, and code-compliant foundation for upcoming updates, with all activities aligned to the NAICS code 238990 for other specialized construction services. The solicitation was posted on July 28, 2026, and responses are due by September 2, 2026, indicating a targeted timeline for contractor selection and project initiation. The location of performance is unspecified, but the work is understood to occur at properties under the jurisdiction of the Cobb County Board of Education. No set-aside provisions or specific point of contact details are provided, and the contract can be viewed via the provided state procurement portal link.

Cobb County Board of Education

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Facilities Specialty Service Providers RFPThe Harris Center for Mental Health and IDD is issuing a Request for Proposals to engage Facilities Specialty Service Providers for a range of maintenance and construction services including electrical, painting, plumbing, flooring, door hardware and locksmith work, paving and striping, doors, fence installation and repair, restoration and waterproofing, roofing, HVAC, general contracting, environmental services, and event equipment rental. The solicitation, identified as FY26-0478, was posted on July 28, 2026, and all specifications are available on the center’s website and through its Bonfire procurement portal. A non-mandatory vendor conference is scheduled for August 6, 2026, at the center’s headquarters in Houston, Texas, and all questions from interested parties must be submitted by the same day. Proposals are due by 10:00 a.m. on August 20, 2026, and must be submitted via the designated online platform. The center retains full discretion to reject any or all proposals, waive minor procedural irregularities, and is not required to accept the lowest bid, prioritizing overall best value and alignment with operational needs. Primary point of contact for inquiries is Frances Otto, with additional support from Nina Cook and Sharon Brauner in purchasing.

HARRIS CENTER FOR MENTAL HEALTH

POSTED

about 22 hours ago

DEADLINE

General Demolition and Site ClearingThe contract titled General Demolition and Site Clearing covers the complete removal of existing structures and debris, followed by site grading and preparation activities necessary to support new construction. Work is to be performed at a location in Tracy, California, with a ZIP code of 95304-5000, and falls under the NAICS code 238990 for other construction support activities. This is a subcontract opportunity issued by the Department of Defense under the Maritime Supply Chain organization, with a posted date of July 28, 2026, and a response deadline of August 10, 2026. All activities must comply with federal and local regulations regarding demolition, environmental safety, and site disturbance, and the contractor is expected to deliver a clean, leveled, and ready-to-build site upon completion. The solicitation is accessible via the DIBBS platform for qualified subcontractors to respond before the deadline.

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

On-Call Fencing Construction ServicesThe City of Roseville is seeking qualified contractors for an on-call fencing construction services contract covering installation, repair, and replacement of multiple fencing types including wood, chain link, wrought iron, concrete split rail, and post and cable barriers across city properties. The selected contractor must provide all labor, materials, and equipment, and is responsible for comprehensive project management including field investigations, quoting using pre-approved unit prices, communicating with residents, implementing traffic control measures, removing and disposing of existing materials, and ensuring thorough site cleanup. All work must comply with City standards and prevailing wage requirements. The contract is multi-year and intended for flexible, as-needed deployment throughout Roseville, California, with performance expected to meet rigorous public infrastructure norms. Proposals must be submitted by August 5, 2026, and inquiries can be directed to Eric Dexter, the primary point of contact at cityclerkroseville@roseville.ca.us. The solicitation, identified by number 20260727041, falls under NAICS code 238990 and is issued by the City of Roseville in California. Interested parties should review the complete solicitation details via the provided online portal to ensure full compliance with submission guidelines and contract expectations.

City of Roseville

POSTED

about 24 hours ago

DEADLINE

Crack Sealing Services on US-281, Jim Wells County, TXCrack sealing services are required for a 0.01-mile segment of US Highway 281 in Jim Wells County, Texas, aimed at preserving pavement integrity and extending the lifespan of the roadway. The work must be completed within 27 working days following contract award, emphasizing timely execution to minimize disruption and ensure long-term structural benefits. The contract is classified as a subcontract under NAICS code 238990, issued by the Texas Department of Transportation, with responses due by August 18, 2026. Performance is localized entirely within the specified highway segment, and while the solicitation number and point of contact are not provided, the official procurement portal for details is listed as txsmartbuy.gov.

Texas Department of Transportation

POSTED

DEADLINE

More opportunities from Utah

Same awarding agency

GJ27-8 UCA Birch Creek Modular Radio Communications ShelterThe Utah Communications Authority is seeking proposals for the GJ27-8 solicitation titled GJ27-8 UCA Birch Creek Modular Radio Communications Shelter, with questions due by August 2 2026 at 3 PM Mountain Time and responses due by August 5 2026 at 3 PM Mountain Time, both submitted through the U3P platform. Submissions are subject to a strict 1GB file size limit per upload, and vendors must ensure full compliance with all requirements outlined in the official solicitation document, as this procurement is managed solely by the Utah Communications Authority and not by the Division of Purchasing. The contract award will not be published on the public posting site and vendors must contact the designated office directly for award information. The solicitation will be closed upon the deadline but responses will still be evaluated according to the criteria specified in the document. The place of performance is in Utah, and vendors are responsible for reviewing all terms, conditions, and procedures independently to ensure timely and accurate submission.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

Safety and Hazard Management ServicesThe contract titled Safety and Hazard Management Services requires the implementation of comprehensive site safety protocols, including the conduct of thorough hazard assessments and ongoing enforcement of OSHA regulations alongside project-specific safety standards. The work is focused on ensuring full compliance with federal and local safety requirements to protect personnel and maintain operational integrity across all assigned sites. This subcontract is open for bidding with a response deadline of September 10, 2026, and falls under the NAICS code 541690 for other scientific and technical consulting services. The solicitation is issued by the state of Utah through its designated agency, with no specific location or point of contact provided, and the opportunity is accessible via the BonfireHub platform. The contract does not specify a set-aside type or organizational restrictions, leaving it open to qualified contractors regardless of size or ownership structure.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Material and Equipment Supply (General)The contract is for the supply of certified construction materials and equipment, including structural steel, roofing, and specialty finishes, as outlined in the project specifications. It is structured as a subcontract with a North American Industry Classification System code of 332311, indicating involvement in metal fabrication for building construction. The opportunity was posted on July 28, 2026, and responses are due by September 10, 2026, at 6:00 PM. The Utah agency is managing the solicitation, though specific location details for performance or contact information are not provided. All materials must meet certified standards required for the construction scope, and bidders are expected to comply with all technical and quality assurance stipulations without explicit set-aside provisions outlined.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Site Inspection and Quality Assurance ServicesThe contract seeks qualified providers to deliver site inspection and quality assurance services for projects under the jurisdiction of the Utah agency, ensuring strict adherence to contract documents, applicable codes, and regulatory requirements. Inspectors will work in close coordination with the Design and Facility Construction Management team and the Architect/Engineer to verify compliance at all stages of construction, identifying deficiencies and documenting corrective actions to maintain project integrity and safety standards. The opportunity is classified as a subcontract under NAICS code 541330, and responses must be submitted by September 10, 2026, with the solicitation posted on July 28, 2026. Performance is expected to occur within the State of Utah, though specific location details are not provided. The contract does not indicate a set-aside designation or designated point of contact, and interested parties should refer to the official Bonfire link for submission guidelines and additional requirements.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Electrical Systems InstallationThe contract titled Electrical Systems Installation seeks a subcontractor to provide comprehensive installation of power, lighting, controls, and low-voltage systems necessary for the proper operation and inspection of a facility. The work encompasses all electrical infrastructure required to support functionality and compliance, including wiring, circuitry, switching, monitoring systems, and integrated control networks. The solicitation is open for responses until September 10, 2026, with a posting date of July 28, 2026, and is classified under NAICS code 238210 for electrical contractors. While the specific location of performance is not detailed, the contracting entity is the state of Utah, and the opportunity is accessible through the Utah Bonfire Hub platform. No set-aside status or additional organizational details are provided, indicating the contract is open to general qualified subcontractors without specific socioeconomic preferences.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Mechanical Systems InstallationThe contract involves the installation of HVAC, plumbing, and process piping systems in accordance with approved project drawings and all applicable codes and standards. The work is classified under NAICS code 238220 and is structured as a subcontract, indicating it is part of a larger construction or facility project managed by a prime contractor. The opportunity was posted on July 28, 2026, with a response deadline set for September 10, 2026, giving potential bidders approximately six weeks to prepare and submit their proposals. The contracting entity is the State of Utah, though specific location details for the place of performance are not provided, suggesting the work may occur at one or more sites within the state. All installations must comply with current regulatory requirements and technical specifications to ensure system functionality, safety, and code adherence.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Concrete Supply and PlacementThe contract titled Concrete Supply and Placement requires the full scope of concrete work for structural and site improvements, encompassing formwork construction, concrete pouring, proper curing methods, and final finishing to meet specified standards. All work must be completed in accordance with industry best practices and project requirements, ensuring durability and safety for both structural elements and site features. The subcontract is open for bidding with a response deadline of September 10, 2026, and is classified under NAICS code 238110, indicating it aligns with concrete work services. The opportunity is managed by the state of Utah, with performance expected to take place within its jurisdiction, though specific location details are not provided. Bidders must be prepared to handle all logistics, materials, labor, and equipment necessary to deliver the required concrete services without reliance on additional contractual support.

Poured Concrete Foundation and Structure Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

General Construction ManagementThe contract titled General Construction Management involves comprehensive oversight of all construction activities, including scheduling, coordination with subcontractors, ensuring regulatory compliance, and delivering accurate as-built documentation. The role requires active management throughout the project lifecycle to maintain timelines, quality standards, and adherence to applicable codes and protocols. This is a subcontract opportunity under NAICS code 236220, indicating classification within nonresidential building construction, and is being solicited by the state of Utah under its agency name. The opportunity was posted on July 28, 2026, with a firm response deadline of September 10, 2026, at 6:00 PM. The place of performance and specific office address details are not provided, but the solicitation is accessible through the Utah BonfireHub portal for further inquiry and submission.

Commercial and Institutional Building Construction

POSTED

about 18 hours ago

DEADLINE

in about 1 month

DFCM Construction - VBS Construction Stage II - Invitation to Interview - Department of Veterans and Military Affairs - William E. Christofferson Salt Lake Veterans Home - 23383490This solicitation is Stage II of a two-phase selection process for the construction of a 105-bed skilled nursing facility in West Valley City, Utah, to be managed by the Utah Department of Veterans and Military Affairs. Only contractors who were shortlisted during Stage I, the Request for Proposals, are eligible to participate in this stage, which requires them to attend an interview and submit detailed cost proposals. The project has an estimated construction cost of seventy-three million dollars, and performance must occur at the designated work site, with all labor, materials, and services delivered as directed by the Division of Facilities Construction and Management (DFCM). Submission of proposals is due by September 10, 2026, and must be delivered via registered mail or email, with no online portal specified. While no formal solicitation number is provided, the reference number DA26055-Stage II is used internally. The award basis, evaluation factors, and specific technical criteria are not outlined in the available documentation, and no federal FAR clauses are applicable—instead, the contract follows state-level provisions with internal clause numbering such as Section 11.5 and 11.6, which mandate non-discrimination, compliance with applicable laws, and adherence to ethical standards. The contractor is responsible for all aspects of construction including adherence to approved contract documents, drawings, specifications, and amendments, and must comply with local and state regulations. Deliverables include timely submittals of shop drawings, product data, samples, as-built documentation, and compliance with a detailed Critical Path Method schedule to achieve Substantial Completion within the Contract Time. Inspection and acceptance occur at the project site and are conducted jointly by DFCM, the Contractor, and the Architect/Engineer, with the Contractor bearing all costs for re-inspections and corrections. The contract requires performance and payment bonds, mandatory insurance coverage, lien waivers, and affidavits of paid payrolls and bills as conditions of payment. A one-year warranty on materials and workmanship is stipulated, along with indemnification clauses to protect the state from claims arising from the Contractor’s operations. Subcontractors must be pre-approved and disclosed prior to award, with exceptions permitted under specified conditions. No information on FOB terms, specific accounting codes, electronic invoicing systems, COR/COTR contacts, or packaging and marking standards is included. The contract also imposes no requirement for Unique Entity ID, CAGE code, or socioeconomic certifications, and does not include options, key personnel designations, or security clearance

Commercial and Institutional Building Construction

POSTED

about 18 hours ago

DEADLINE

in about 1 month

As-Built Documentation and Record DrawingsThe contract seeks a subcontractor to produce certified as-built drawings that accurately reflect the final field conditions and all changes made during construction. These drawings must document modifications, deviations, and alterations from the original design specifications to ensure a complete and precise record of the built environment. The work is tied to a specific construction project under the jurisdiction of Utah and requires adherence to professional standards for accuracy, certification, and timely delivery. The solicitation is open as a subcontract opportunity with a response deadline of August 24, 2026, and is classified under NAICS code 541370, which pertains to surveying and mapping services. All deliverables must be submitted in a format suitable for official records and must be verified to reflect the actual conditions on-site following construction completion.

Surveying and Mapping (except Geophysical) Services

POSTED

about 19 hours ago

DEADLINE

Shop Drawing and Submittal CoordinationThe contract requires the preparation, coordination, and management of all shop drawings, product data, and samples necessary for approval by the architect or engineer. This role involves ensuring that all submittals are accurately compiled, consistently formatted, and timely submitted to meet project schedules and compliance standards. The contractor must maintain clear communication with design teams and subcontractors to resolve revisions, track approval statuses, and document updates throughout the construction lifecycle. This is a subcontract opportunity under NAICS code 541611, posted by the state of Utah with a response deadline of August 24, 2026. The work is intended to support construction projects under Utah’s jurisdiction, though specific project locations and performance details are not provided. Interested parties must submit proposals by the deadline through the designated portal at the provided link, and the engagement will involve managing documentation workflows critical to regulatory and design compliance, with emphasis on accuracy, timeliness, and attention to detail in all submittal processes.

Administrative Management and General Management Consulting Services

POSTED

about 19 hours ago

DEADLINE