SOURCES SOUGHT SPLIT DUCTLESS HVAC SYSTEM W912DW-16-R-KS01 SYNOPSIS: 1. The U.S. Army Corps of Engineers, Seattle District is seeking manufacturers and/or distributors of ductless, split system A/C unit/Mini-Split/or VRF (Variable Refrigerant Flow) Systems. Units must meet requirements of Buy American Act, specifically FAR 52.225-9 Buy American Act - Construction AND be Energy Star Compliant, in accordance with Federal Energy Management Plan requirements and FAR Part 23.203. The requirements for these systems are described in paragraph two (2) below. 2. TECHNICAL REQUIREMENTS: a. Unit shall meet FAR 52.225-9, Buy American Act - Construction b. Unit must comply with FAR Part 23.203 and Federal Energy Management Plan Requirements for Energy Star products. c. Unit shall have a minimum SEER rating of 14. d. Unit shall have a minimum EER rating of 12. e. Unit shall utilize Refrigerant R410A. f. Unit shall be able to maintain system operation at ambient temperature down to zero degrees Fahrenheit. g. Unit shall maintain room space temperature/Set Point of 72 degrees Fahrenheit and Relative Humidity of 50% b. SUBMISSION REQUIREMENTS: a. Manufacturers and/or suppliers responding to this announcement shall submit the technical specifications, as noted below, for ALL units/sizes that meet the minimum technical requirements defined in Paragraph 2 of this announcement, as follows: a. Size/Capacity: 1 ton, 1.5 ton, 2 ton, 3 ton, etc (12k, 18k, 24k, 36k BTU, etc). b. SEER Rating c. EER Rating d. Refrigerant Type e. Maximum horizontal and vertical lengths of the refrigerant line set f. Fixed or Variable Speed Cooling g. Whether or not the unit has removable access to controls without interrupting airflow and allowing for service without the use of special tools. - Type of condensate pan (whether corroding or non-corroding and the type of slope) - Wall mounted, floor mounted, or ceiling mounted - Whether the thermostat is internal or external - Whether the fans and compressors are fixed or variable speed - Whether the condenser circuits are or are not pre-piped with start up and head pressure controls - Whether the unit has a side or top discharge b. A catalog cut of the units with technical specification demonstrating all compliant units shall be included. c. Provide approximate cost and place of manufacture for each unit. Responses shall be submitted to Ms. Kathaleen Schollard at kathaleen.schollard@usace.army.mil with company name, address, and point of contact including email address. PLEASE NOTE THAT THE ARMY CORPS OF ENGINEERS EMAIL SYSTEM DOES NOT ALLOW RECEIPT OF INDIVIDUAL EMAILS OVER 8 MB. If an email response is greater than 8 MB, it will not likely be received. As such, responders are advised to reduce file sizes and/or submit responses in multiple emails, if necessary. Responses must be received no later than 2:00 p.m. Pacific Time on Wednesday, the 29 of July 2016.