Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

53--SPRING

Awarded
SPE7LX-26-U-4534Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled "SPRING" involves the procurement of two units of a specified part number (5360-01-135-4746) with a delivery schedule of 111 days after the order date. It is issued by the Department of Defense under the Strategic Acquisition Program Directorate, with solicitation number SPE7LX-26-U-4534 and a response deadline of March 19, 2026. The contract follows the Defense Logistics Agency (DLA) packaging and procurement requirements and incorporates defined technical and quality standards as referenced in the DLA Master List of Technical and Quality Requirements. These standards govern aspects such as sampling methodology, inspection levels, and acceptance criteria, ensuring stringent quality control. The contract explicitly prohibits the intentional addition or contact of mercury or mercury-containing compounds with the supplied hardware and supplies, except in specified functional uses like batteries and sensors, where containment requirements apply. Marking and identification standards for U.S. military property follow MIL-STD-130N guidelines. Quality assurance provisions include sampling in accordance with MIL-STD-1916 or comparable plans, with specific verification levels assigned to critical, major, and minor attributes. The requirement applies to simplified acquisitions, with applicable revisions controlled by the solicitation or award dates. The point of contact for this contract is Theodore Misiolek, reachable via email or phone for further inquiries.

General Info

Procurement of two parts, delivered in 111 days, with strict DLA quality and mercury restrictions.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Contract Value

$0

NAICS

332613 - Spring Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

MAROTTA CONTROLS INC

Award Issued Date

Documents

1

SPE7LX-26-U-4534.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
Natalya Radyk
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING
SPRING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
ADEQUATE DATA FOR NSN/Part Number: 5360-01-135-4746 Quantity: 2 EA Purchase Request: 1000226651QTY: 2 Delivery: 111 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
Supply of Spring-Loaded Shaft Seal AssembliesThis subcontract involves the supply of 5,000 spring-loaded shaft seal assemblies to support DLA maritime supply chain contracts. The required components must match NSN 4320013670755 and Manufacturer Part Number 5290-4017 from Fluid Conditioning Products, Inc. Due to their designation as Critical Application Items, all assemblies must strictly adhere to manufacturer specifications. The contract is managed under the Department of Defense for the DLA Weapons Support Maritime Supply Chain ESOC Buys, with performance taking place in Mayport, Florida. Delivery terms are established as FOB Origin. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332613.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Precision Helical Compression Spring FabricationThis subcontract involves the precision fabrication of four helical compression springs for the Department of Defense under the DLA Weapons Support Land Supply Chain. The manufacturer must produce the components in strict accordance with Basic Drawing NR 19206 7144099 Revision H and Reference Drawing NR 1NUW7 7309998 Revision G, ensuring the final delivery of items under NSN 5360-00-714-4099. Quality assurance is a critical component of the agreement, requiring zero non-conformances per MIL-STD-105/ASQ Z1.4 and a guarantee that the materials are free of mercury. Additionally, the contractor must maintain CMMC Level 2 compliance to meet security standards. The solicitation was posted on October 28, 2026, with a response deadline of November 4, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
Supply of Precision Spring (NSN 5360-00-465-7280)This subcontract involves the manufacture or procurement of one specialized precision spring conforming to technical data for NSN 5360-00-465-7280. The project supports prime contractors working with the Department of Defense under the DLA Weapons Support Land Supply Chain. Performance of the contract requires strict adherence to the Buy American Act, the Berry Amendment, and hazardous material labeling standards as outlined in 29 CFR 1910.1200. The opportunity is categorized under NAICS code 332613 and was posted on October 28, 2026, with a response deadline of November 9, 2026. The place of performance is designated as FPO 96349. The primary objective is the delivery of a single spring that meets all specified national stock number requirements.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring FabricationThis subcontract involves the manufacture and delivery of 1,410 helical compression springs for the Department of Defense under the DLA Weapons Support Land Supply Chain. The fabrication process must strictly adhere to Basic Drawing NR 19207 7379067 Revision C and Reference Drawing Revision 10, while meeting quality standards RA001, RP001, and RQ011. All finished products must be marked according to MIL-STD-130N. The project requires the use of precision spring winding machinery and mandates compliance with NIST SP 800-171 security standards. Performance for this contract will take place in Phoenix, Arizona, under NAICS code 332613.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Precision Flat Spring Fabrication (NSN 5360-01-107-2111)This subcontract involves the fabrication of 38 critical application flat springs, identified by NSN 5360-01-107-2111, for the DLA Weapons Support Maritime Supply Chain. The selected manufacturer must produce the springs according to the specific dimensions and tolerances outlined in drawing NR 81755 and ensure the delivery of First Article Testing within 90 days. Performance will take place in Greensboro, North Carolina. To qualify, the contractor must possess precision spring winding equipment and maintain CMMC Level 2 certified systems. Strict adherence to ITAR and EAR compliance is required for this Department of Defense project. Interested parties must respond by November 5, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332613
New
DIBBS
Manufacturing of Critical Application Helical Compression SpringsThis subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, requires the manufacture of 382 helical compression springs under Part Number 744429-A00 and NSN 5360-01-389-0064. The project involves using precision winding and coiling machinery to deliver finished and tested units. This is a Total Small Business Set-Aside under NAICS code 332613, with performance taking place in Phoenix, Arizona. The contractor must strictly adhere to DLA Master List RA001 quality standards and NIST SP 800-171 cybersecurity requirements. Additionally, the manufacturing process must be free of mercury and hexavalent chromium. Interested parties must respond by November 9, 2026.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring SupplierThis subcontract involves the manufacture and delivery of one Helical Compression Spring for the DLA Weapons Support Land Supply Chain. The supplier must produce the component according to NSN 5360-01-335-3340 specifications and the DLA Master List of Technical and Quality Requirements. Strict adherence to the Buy American Act and the Berry Amendment is required for all material sourcing, and the supplier must provide full supply chain traceability documentation. The completed spring is to be delivered FOB Destination to the USS William P Lawrence DDG 110. This requirement falls under NAICS code 332613, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Spring Steel/Wire SupplyThis subcontract involves the supply of high-grade spring steel or alloy wire to prime contractors supporting the DLA Weapons Support Land Supply Chain. The provider is responsible for delivering raw stock that strictly adheres to NSN 5360-01-346-2287 material specifications, accompanied by Mill Test Reports to verify compliance with all applicable defense standards. The contract mandates strict adherence to the Buy American Act and the Berry Amendment to ensure domestic sourcing of all materials. Performance for this requirement is centered in Fort Benning, Georgia, under NAICS code 332613. Interested parties must submit responses by November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring FabricationThis subcontract involves the fabrication of one helical compression spring for the DLA Weapons Support Land Supply Chain. The manufacturer must produce the part according to NSN 5360-01-346-2287 specifications and the DLA Master List of Technical and Quality Requirements (RA001), utilizing specialized spring winding, coiling, and heat treatment equipment. The project is managed under the Department of Defense and requires strict compliance with the Buy American Act and the Berry Amendment. Performance will take place in Fort Benning, Georgia, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Supplier of MIL-DTL-16878/3C(1) Electrical WireThis subcontract involves the supply of specialized electrical wire, specifically NSN 6145-00-823-2922, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The manufacturer must produce the wire in continuous 500 foot spools in strict accordance with MIL-DTL-16878/3C(1) Revision C. Performance takes place in Fort Stewart, and the supplier is required to maintain NIST SP 800-171 compliance to ensure data security. The contract mandates strict adherence to the Buy American Act and the Berry Amendment. Additionally, all products must be packaged and marked according to MIL-DTL-12000, MIL-STD-2073-1E, and MIL-STD-129 standards. Interested parties must respond by November 9, 2026, under NAICS code 332613.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring FabricationThis subcontract involves the fabrication of 321 helical compression springs for the DLA Weapons Support Maritime Supply Chain. The units must be manufactured according to NSN 5360-00-844-1571 and PN 69-2124 specifications, adhering strictly to Critical Application Item standards and DLA Master Lists RA001 and RQ011. Production requires the use of precision winding equipment, as additive manufacturing is explicitly forbidden. All materials used must be mercury-free and compliant with the Berry Amendment. Finished products are to be packaged in accordance with MIL-STD-2073-1E. The work is to be performed in Greensboro, North Carolina, under NAICS code 332613, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Precision Spring Tension Washer (NSN 5310-01-729-0567)This subcontract involves the procurement of one critical application precision spring tension washer, identified by NSN 5310-01-729-0567, to support prime contractors under DLA Weapons Support contracts. The selected provider is responsible for manufacturing or sourcing washers that are compatible with part numbers from Electric Boat Corporation and Key Bellevilles Inc. as specified in the DLA Master List. The contractor must adhere to strict quality assurance and logistics standards, performing sampling according to MIL-STD-1916 or ASQ H1331, and ensuring packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129. The final product is to be delivered to Stonington, Connecticut. This opportunity is managed by the Department of Defense under NAICS code 332613, with a response deadline of November 11, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 561910
New
DIBBS
Military-Grade Packaging and Palletization ServicesThis subcontract, issued by the Department of Defense under the Strategic Acquisition Program Directorate, requires specialized packaging, marking, and palletization services for prime contractors on DLA supply contracts. The scope of work involves the processing of 78 springs, ensuring they are fully prepared for transport using industrial marking equipment and MIL-SPEC materials. Compliance is mandatory across three primary standards: packaging must adhere to MIL-STD-2073-1E, marking must follow MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The project falls under NAICS code 561910 and was posted on October 27, 2026, with a response deadline of October 30, 2026.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332613
New
DIBBS
Manufacturing of Flat Springs (NSN 5360-01-474-9602)This subcontract involves the manufacture and supply of 78 flat springs under NSN 5360-01-474-9602 for prime contractors supporting DLA supply contracts. The work is managed by the Strategic Acquisition Program Directorate within the Department of Defense and falls under NAICS code 332613. Fabrication must adhere to exact technical specifications using either additive manufacturing equipment or spring winding and forming machinery. To be eligible, the provider must maintain active SAM registration and ensure full compliance with DFARS 252.204-7018. The solicitation was posted on October 27, 2026, with a response deadline of October 30, 2026.
Spring Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7LX-26-U-9768
This solicitation, issued by the DLA Land and Maritime Strategic Acquisition Program Directorate, is for the procurement of flat springs identified by NSN 5360014749602. The requirement consists of an estimated quantity of 78 units with a delivery timeline of 104 days. The acquisition is categorized under NAICS code 332613 and is managed by point of contact Theodore Misiolek. Award evaluation will be based on the price quoted for the estimated annual demand. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including specific prohibitions against the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Berry Amendment and Buy American Act regarding domestic material sourcing. Order limitations are set with a minimum order of 39 units and a maximum order value of 350,000 dollars.
Spring Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 423830
DIBBS
Hardware Distribution (NSN 2530-01-630-3036)This subcontract, managed by the Strategic Acquisition Program Directorate under the Department of Defense, involves the distribution of molded pins identified by NSN 2530-01-630-3036. The selected provider is responsible for sourcing these components from approved manufacturers, managing all delivery logistics, and providing verifiable documentation to ensure the authenticity of the hardware. To be eligible, the contractor must hold authorized dealer status or possess express written authority from the approved source. The contract requires the delivery of the specified quantity of pins along with all necessary authenticity certifications. The response deadline for this opportunity is November 2, 2026.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

27 days ago

DEADLINE

in 5 days
View Details
NAICS: 339999
DIBBS
Molded Pin ManufacturingThis subcontract, managed by the Strategic Acquisition Program Directorate under the Department of Defense, involves the manufacturing of molded pins for prime contractors supporting DLA supply contracts. The selected provider must fabricate and mold pins according to NSN 2530-01-630-3036 specifications, ensuring all items undergo quality control testing for compliance and are packaged and marked in accordance with MIL-STD-129. The contractor is required to possess molding machinery capable of producing this specific pin design to fulfill a delivery quantity ranging from 16,750 to 31,729 units. The opportunity was posted on October 1, 2026, with a response deadline of November 2, 2026. Classified under NAICS code 339999, the contract focuses on precise technical execution and adherence to military standards for delivery and marking. Interested parties can find further details through the provided DIBBS solicitation link.
All Other Miscellaneous Manufacturing

POSTED

27 days ago

DEADLINE

in 5 days
View Details
NAICS: 561910
DIBBS
MIL-SPEC Packaging and LogisticsThis subcontract, titled MIL-SPEC Packaging and Logistics, is a total small business set-aside under the Department of Defense for the Strategic Acq Program Directorate. The project focuses on providing specialized military packaging and electronic tracking labels for finished seats intended for prime contractors. The scope of work requires strict adherence to MIL-STD-129 and MIL-STD-2073-1E standards, specifically involving the application of RFID tags and bar coding to ensure precise logistics and tracking. The contractor is responsible for securing units in a collapsed position and delivering them as ready-to-ship packaged units. This opportunity falls under NAICS code 561910 and was posted on May 5, 2026, with a response deadline of December 3, 2026.
Packaging and Labeling Services

POSTED

6 months ago

DEADLINE

in about 1 month
View Details
NAICS: 326150
DIBBS
Vehicular Seat Upholstery and Foam IntegrationThis subcontract opportunity, titled Vehicular Seat Upholstery and Foam Integration, involves the supply and installation of green upholstery and internal cushioning for vehicular seats. Supporting prime contractors under the Department of Defense Strategic Acq Program Directorate, the selected provider will be responsible for the cutting and sewing of military-grade green fabric and the molding of seat foam in accordance with NSN 2540-01-436-4175. The scope of work requires the use of industrial sewing and foam cutting equipment to deliver fully upholstered seat assemblies. The project is designated as a Total Small Business Set-Aside under NAICS code 326150. Interested parties should note that the solicitation was posted on May 5, 2026, with a response deadline of December 3, 2026.
Urethane and Other Foam Product (except Polystyrene) Manufacturing

POSTED

6 months ago

DEADLINE

in about 1 month
View Details
NAICS: 332812
DIBBS
Military-Grade Prime and Finish ApplicationThis subcontract opportunity, titled Military-Grade Prime and Finish Application, is issued by the Department of Defense under the Strategic Acq Program Directorate. The project requires the application of specialized military-specification primers and finishes to seat frames for prime contractors. Specifically, the contractor must apply MIL-DTL-53084 primer and MIL-DTL-53039 finish in either black or green using industrial spray booths and curing ovens to deliver completed seat frames. The solicitation is designated as a Total Small Business Set-Aside under NAICS code 332812. It was posted on May 5, 2026, with a response deadline set for December 3, 2026. Interested parties can find further details through the DLA Dibbs portal.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

6 months ago

DEADLINE

in about 1 month
View Details
NAICS: 332312
DIBBS
Vehicular Seat Frame FabricationThis subcontract for Vehicular Seat Frame Fabrication involves the production of structural metal frames and mounting components for vehicular seats. Working under the Department of Defense Strategic Acq Program Directorate, the contractor is responsible for precision welding and forming of metal components according to Drawing 12446712, as well as supplying necessary lower bolts and washers. The final deliverables consist of completed, uncoated metal seat frames. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312. To be eligible, contractors must hold either ISO 9001 or AS9100 certification. The solicitation was posted on May 5, 2026, with a response deadline set for December 3, 2026.
Fabricated Structural Metal Manufacturing

POSTED

6 months ago

DEADLINE

in about 1 month
View Details
DIBBS
SEAT, VEHICULAR
Solicitation # SPE7LX-26-R-0066
Solicitation SPE7LX-26-R-0066 is an indefinite-quantity contract issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of Vehicular Seats (NSN 2540-01-436-4175). The requirement is for 596 green vehicular seats, designated as critical application items, with a contract structure consisting of a three-year base period and two one-year option periods. While originally a Total Small Business Set-Aside, Amendment 0001 transitioned the procurement to Unrestricted competition with a final response deadline of December 3, 2026. The contract value ranges from a minimum of 1,698.96 dollars to a maximum of 1,698,957.60 dollars. Award decisions will be based on best value, utilizing a trade-off between price and non-price factors, including past performance via the Supplier Performance Risk System, proposed delivery schedules, and surge and sustainment capabilities. Technical compliance is governed by specific basic and reference drawings, with a mandatory requirement for the contractor to perform First Article Testing on three units and submit a report within 90 calendar days of the contract date. Delivery terms are f.o.b. origin, requiring transportation to a contiguous United States location. Contractors must adhere to strict cybersecurity standards, specifically maintaining a current CMMC Level 2 status (Self or C3PAO) for information systems processing federal contract information or controlled unclassified information. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Invoicing and payment requests are to be processed electronically through the Wide Area WorkFlow system. Offerors must also possess an approved US/Canada Joint Certification Program certification to access export-controlled data.

POSTED

6 months ago

DEADLINE

in about 1 month
View Details
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE7LX-26-R-0007
Solicitation SPE7LX-26-R-0007 is a sole source, firm-fixed price, long-term requirements contract issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for structural support items. The contract is designed to consolidate 1,309 National Stock Numbers (NSNs) supplied solely by AM General to improve supply availability and reduce lead times. The procurement is structured into three distinct groups: commercial items under CLIN 0001 (FAR Part 12), non-commercial items under CLIN 0002 (FAR Part 15), and Depot-Level Reparable items under CLIN 0003. The total estimated value over the ten-year period of performance, which consists of a five-year base period and five one-year options, is approximately 609 million dollars. The contract mandates strict quality and compliance standards, including adherence to ISO 9001 or AS9100 inspection systems and MIL-STD-129 marking and MIL-STD-2073-1E packaging requirements. Contractors must comply with Cybersecurity Maturity Model Certification (CMMC) levels and NIST SP 800-171 assessments for handling controlled unclassified information. Award decisions are based on a best value determination, weighing price, past performance, and delivery. Additionally, the contract includes provisions for surge and sustainment capabilities, first article testing, and a structured process for adding sole source items to the contract scope over time. Invoicing and payment are processed electronically through the Wide Area WorkFlow (WAWF) system.

POSTED

7 months ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332613
Awarded
Federal
53--SPRING,HELICAL,COMP
Solicitation # SPE7L126T227B
DLA Land And Maritime

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Awarded
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-223C
LAND SUPPLY CHAIN

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Closed
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-224P
LAND SUPPLY CHAIN

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Awarded
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-995F
ASC COMMODITIES DIVISION

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Closed
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-224N
LAND SUPPLY CHAIN

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Closed
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-224R
LAND SUPPLY CHAIN

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Closed
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-225C
LAND SUPPLY CHAIN

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Closed
DIBBS
SPRING, HELICAL, TORS
Solicitation # SPE7L1-26-T-224T
LAND SUPPLY CHAIN

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Awarded
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-223D
LAND SUPPLY CHAIN

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Closed
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE4A5-26-T-005G
ASC SUPPLIER OPER OEM DIVISION

POSTED

8 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Awarded
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE4A5-26-T-005B
ASC SUPPLIER OPER OEM DIVISION

POSTED

8 months ago

CLOSED

7 months ago
View Details
NAICS: 332613
Closed
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE4A5-26-T-003S
ASC SUPPLIER OPER OEM DIVISION

POSTED

8 months ago

CLOSED

7 months ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS