SRM Tooling

The Naval Air Warfare Center Aircraft Division Lakehurst, NJ (NAWCAD LKE) intends to solicit, negotiate, and award a firm-fixed price contract on a sole source basis to The Boeing Company for the manufacture, assemble, and deliver Peculiar Support Equipment (PSE) and Nondestructive Inspection (NDI) kits listed below: - Aileron Shroud Maintenance Fixture; Mod to 74D900516-1001/1002; Mod to include hinge lug oversize capability - Inboard Leading Edge Flap Repair Equipment; Mod to RE174192500-1/2; Mod to include oversize capability to hinge rib - IWP Attach Lug, Repair Fixture New; New; SE to oversize inner wing lug bushings - IWP TEF Hinge Lug Bushing Oversize kit New; New; SE to oversize TEF hinge lug bushings - IWP TEF Shroud Lug Bushing Oversize kit New; New; SE to oversize TEF Shroud hinge lug bushings - OWP Perimeter Lug Oversize kit; Mod to 74D900511-1001; Mod to address oversize bushings on outer wing perimeter - TEF Hinge Lug, Oversize Kit New; New; SE to address oversize monoball bearings in hinge lugs - TEF Shroud Repair Fixture; Mod to 74D900534-1001/1002; Mod 74D900534-1001/1002 to address installation of repair lug - Horizontal Stabilator Bushing Removal Tool New; New; SE to remove Inner and Outer Horizontal Stabilator Bushings - NDI, Large Diameter Hole Probe Kit; New; Supports multiple SRM WPs and contains 16 unique hole probes (qty 2 each for 32 total probes), one aluminum standard, and one titanium standard. Include Spitfire tool in this kit - NDI, Wing Lug Hole Probe Kit; New; Supports the inner wing lugs (2 WPs) and contain 2 unique probes (qty 2 each) + 1 titanium standard This effort includes the design, development, fabrication and delivery of PSE items listed above as well as procurement of the NDI kits listed above. The PSE and NDI items support the F/A-18E/F and EA-18G Structural Repair Manual (SRM) Program Work Packages (WPs) that require new or modified equipment to complete repairs to the identified limits. The Boeing Company is the only source with the requisite knowledge, experience, technical expertise, and technical data to produce and deliver the PSE and NDI kits that will meet the F/A-18 E/F test requirements. The Government does not possess the drawings/technical data for the F/A-18 E/F PSE and NDI kits to support a competitive acquisition. The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1 - Only one responsible source and no other supplies or services will satisfy agency requirements. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, the Government will consider all responses received within fifteen days after the date of publication of this synopsis. Registration in the System for Award Management (SAM) (https://www.sam.gov) is mandatory for consideration. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract.