This Government Contract opportunity from Department Of Transportation was posted on September 28, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Standards Enforcement Program for FMVSS No. 209, "Seatbelt Assemblies

Awarded

693JJ923D000068Federal

Submission Closed09/27/2023, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Dimensional Inspection and CertificationThis subcontract for Third-Party Dimensional Inspection and Certification supports the DLA Weapons Support Aviation Supply Chain by providing independent quality assurance and dimensional verification for prime contractors. The scope of work focuses on verifying Class 3A and 3B threads in accordance with System 22 of FED-STD-H28/20, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. The selected provider must operate out of an ISO 9001 or SAE AS9003 certified facility and possess the necessary precision gauging tools to deliver detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Cherry Point. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform Production Lot Testing for prime contractors on DLA supply contracts to verify the dimensions and material properties of machine thread bushings. All testing must be executed using specialized metrology and testing equipment in strict accordance with government standards, culminating in the delivery of a certified Production Lot Test report. The performance of this contract will take place in New Cumberland, Pennsylvania. Key compliance requirements include maintaining CMMC Level 2 certification and coordinating directly with government inspectors for destination acceptance. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Quality ValidationThis subcontract for First Article Testing and Quality Validation supports the DLA Weapons Support Land Supply Chain by providing initial validation and quality testing for prime contractors. The selected provider is responsible for producing two units for government testing at Robins Air Force Base in Georgia and generating detailed inspection reports for 402 MXSG/MXRILL. The project requires the use of precision measurement and test equipment RT001 and strict adherence to FAR 52.209-4 compliance standards. The final deliverables include the two test units and formal Factory Acceptance Test approval documentation. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Third-Party Aerospace Quality Inspection and CertificationThis subcontract for Third-Party Aerospace Quality Inspection and Certification supports prime contractors on DLA Weapons Support ASC projects in Tracy, California. The selected provider will perform independent verification and inspection of critical flight hardware, utilizing attribute and variable inspection per MIL-STD-1916 and sampling plans per MIL-STD-105/ASQ Z1.4 to ensure zero non-conformance. All measurements must be conducted using calibrated CMM and NIST-standard tools, with the final delivery consisting of detailed inspection reports and Certificates of Conformance. To qualify for this engagement, the contractor must maintain ISO 9001:2015 or SAE AS9003 certification. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. Interested parties must submit their responses by the deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Third-Party Quality Assurance and Material TestingThis subcontract for Third-Party Quality Assurance and Material Testing supports the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider will perform independent sampling and testing of manufactured collars for prime contractors, with work performed at Robins Air Force Base. The scope of work involves conducting inspections based on MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes according to AQL requirements. Technical execution requires the use of specialized equipment, including CMM, hardness testers, and destructive testing tools. To qualify, the contractor must hold ISO 9001 or AS9100 certification and is responsible for delivering comprehensive inspection reports and quality certification documents. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected provider will perform Production Lot Testing for prime contractors on DLA supply contracts to validate the quality and functionality of manufactured cable assemblies. Specifically, the contractor must verify that assemblies meet the technical specifications of NSN 6150-01-091-6989 using signal analyzers, insulation resistance testers, or continuity testers. The contractor is required to be compliant with ITAR or EAR regulations and must deliver comprehensive test reports and certification of production lot requirements. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance Sampling and Inspection ServicesThis subcontract for Quality Assurance Sampling and Inspection Services is issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The selected provider will perform independent sampling and quality inspections for prime contractors on Navy hardware procurements, ensuring strict adherence to MIL-STD-1916 or ASQ H1331 sampling standards. Key responsibilities include verifying bare item markings against MIL-STD-129, validating packaging according to MIL-STD-2073-1E, and ensuring all traceability documentation meets NAVAIR requirements. The contractor is required to deliver detailed inspection reports and certifications of compliance to validate the quality of the hardware. This opportunity falls under NAICS code 541380 and is designated for performance at FPO 96672. Interested parties must submit their responses by the deadline of November 6, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) and CertificationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves performing First Article Testing and Certification for prime contractors. The scope of work requires the testing of two units of NSN 6685014827329 to ensure manufacturing compliance in accordance with FAR 52.209-3 and Procurement Note H03. To verify pressure ranges and tolerances, the contractor must utilize certified calibration laboratory equipment and provide a formal First Article Test Report upon completion. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Third-Party Quality Assurance and Certification for Aerospace Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Test (PLT) Laboratory ServicesThis subcontract for Production Lot Test Laboratory Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves conducting physical and material testing on rivet samples to validate quality conformance, utilizing specialized laboratory equipment to certify the strength, dimensions, and composition of the materials. The service provider is responsible for generating detailed test reports and material certifications, as well as providing technical drawings for validation by Tinker Air Force Base. Performance of these services will take place in New Cumberland, Pennsylvania, under NAICS code 541380, with the final deliverables consisting of the completed PLT reports and certifications.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance Inspection and Certification ServicesThis subcontract for Quality Assurance Inspection and Certification Services supports prime contractors delivering aerospace components to the DLA Weapons Support ASC. The selected provider will perform independent inspections and certifications, utilizing sampling protocols such as MIL-STD-1916 or ASQ H1331 to ensure strict compliance with SAE AS81714/4 and SAE AS81714D standards. Additionally, the contractor is responsible for validating mercury-free status in accordance with NAVSEA 5100-003D and providing all necessary inspection reports and Certificates of Conformance. The performance of this contract will take place in San Diego, California. To be eligible, the contractor must hold ASQ certification and maintain CMMC Level 2 compliance. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days

AI Contract Overview

The National Highway Traffic Safety Administration, an agency within the United States Department of Transportation, awarded an IDIQ contract to SGS North America Inc. on September 22, 2023, under solicitation number 693JJ923D000068. This contract supports the Standards Enforcement Program for Federal Motor Vehicle Safety Standard No. 209, which establishes minimum performance requirements for seat belt assemblies to minimize the likelihood of occupants being ejected from a vehicle during an impact. The scope of work involves acquiring professional services for the procurement, inspection, compliance testing, and reporting of seat belt assemblies. Specifically, the contractor is responsible for conducting load tests as specified in TP-209-08, including performance testing for hardware, assemblies, and retractors. These efforts enable the Office of Vehicle Safety Compliance to ensure that manufacturers meet all applicable safety standards and to support the government's overall mission of reducing fatalities and injuries caused by motor vehicle crashes.

General Info

Agency

Department Of Transportation → 693JJ9 Nhtsa Office Of Acquistion

Contract Value

$6,929

NAICS

541380 - Testing Laboratories and Services

Place of Performance

DC, USA

Set-Aside

NONE

Awardee

SGS NORTH AMERICA INC.

Award Issued Date

09/22/2023, 12:00:00 AM UTC

Documents

Contract 693JJ923D000068 - Standards Enforcement Program for FMVSS No. 209

award

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedSep 28

Award Notice

AwardedSep 22

Contract was awarded

Submission Closed

09/27/2023, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Transportation → 693JJ9 Nhtsa Office Of Acquistion

Contacts2 people available

OfficeWASHINGTON, DC, 20590, USA

Organization / AgencyDepartment Of Transportation → 693JJ9 Nhtsa Office Of Acquistion

Office AddressWASHINGTON, DC, 20590, USA

Contacts

Danna Brooks

contact@example.gov

Reba Dyer

contact@example.gov

Full Description

The National Highway Traffic Safety Administration (NHTSA) is an integral part of the United States Department of Transportation (DOT), and its mission is to save lives, prevent injuries, and reduce economic costs associated with motor vehicle crashes. As part of its mission to reduce fatalities and injuries caused by motor vehicle crashes, NHTSA promulgates Federal Motor Vehicle Safety Standards (FMVSS). Manufacturers of motor vehicles and items of motor vehicle equipment are required to certify that each product they sell in the United States meets the requirements of all applicable safety standards. NHTSA's Office of Vehicle Safety Compliance (OVSC) is charged with determining whether manufacturers meet the applicable safety standards. This contract effort will enable the agency to meet its mission by assuring that motor vehicles meet the requirements of FMVSS No. 209, Seat Belt Assemblies. FMVSS No. 209 establishes minimum performance requirements for motor vehicle Seat Belt Assemblies. The purpose of FMVSS No. 209 is to minimize the likelihood of occupants being thrown from a vehicle as a result of impact. The requirements for compliance testing of motor vehicle Seat Belt Assemblies include testing such components to the load test requirements of FMVSS No. 209 as specified in TP-209-08. The purpose of this contract is to acquire services associated with the procurement, inspection, compliance testing, and compliance test reporting of Seat Belt Assemblies to assist the Government in its enforcement efforts for FMVSS No. 209.