Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

STARTER, MOTOR

Active
SPE7M0-26-T-008WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one starter motor identified by NSN 6110-01-137-1923 under solicitation SPE7M0-26-T-008W, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The requirement is a total small business set-aside with a NAICS code of 332112, and bids must be submitted by July 27, 2026. Delivery is required within five days of award, and the place of performance is FPO with a ZIP code of 96675. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision is determined by the solicitation issue date or award date depending on the acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-based acceptance criteria unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware, except in functional applications such as batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary consistent with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and no bidset is available for this solicitation. Primary point of contact is Laurie Wassmuth, reachable via email and phone provided.

General Info

Procure one NSN 6110-01-137-1923 starter motor, small business set-aside, delivery in five days to FPO 96675 by July 27, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

UNIT 100136 BOX 1, FPO, AP, 96675, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7M0-26-T-008W for DLA Maritime Supply Chain

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS

Full Description

Show more
STARTER, MOTOR
STARTER, MOTOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
"DLA does not have a bidset available"
ADEQUATE DATA FOR THE NSN/Part Number: 6110-01-137-1923 Quantity: 1 EA Purchase Request: 7017493325QTY: 1 Delivery: 5 days ADO

Similar Contracts

NAICS: 332112
New
DIBBS
SCREW, MACHINEThis contract specifies the procurement of 684 machine screws identified by NSN 5305-01-173-4789 and part number NAS1802-3-28, governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including QAP EQ003 and other applicable standards such as NAS4003. The product is classified as a critical application item and must comply with detailed specification revisions, sampling protocols per MIL-STD-1916 or ASQ H1331, and zero non-conformance acceptance criteria unless otherwise stipulated. A Certificate of Quality Compliance is required, and all items must be marked and packaged in strict accordance with MIL-STD-129 and MIL-STD-2073-1E, with each fastener individually protected by a wrap or sleeve along the full length of the shank and threads. Packaging must adhere to DLA-specific requirements, and palletization is mandatory under RP001. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the full quantity must be delivered within 170 days of contract award, with a required ship date of January 10, 2027, and an original delivery target of January 8, 2027. The contract prohibits any variance in quantity, with zero tolerance for over or under shipment. The items are to be delivered to DLA Distribution Cherry Point at Phantom Road, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation and freight procedures governed by DLAD Proc Notes C19 and C20. The solicitation, issued under contract number SPE4A6-26-T-06SG, was posted on July 15, 2026, with responses due by July 23, 2026, and falls under NAICS code 332112 for fastener manufacturing. All documentation, including technical data packages and CDRLs, must be accessed via the DLA portal, and the unit of issue is defined according to DoD and ANSI standards.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details