Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Starved Rock Lock and Dam Boiler Replacement

Active
W912EK26QA048Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The US Army Corps of Engineers is seeking a contractor to replace an existing steam boiler at the Starved Rock Lock and Dam with a new Cleaver Brooks M5 steam boiler, along with installing a new Cleaver Brooks condensate return boiler feed system and upgrading the water filtration system. The contractor is responsible for supplying all equipment, materials, and labor necessary to remove the old boiler, properly set the new boiler in place, and ensure full operational integration of the new systems. The U.S. Army Corps of Engineers will handle the transportation and crane operations required to move the new boiler from land to the entrance of the boiler house, relieving the contractor of those logistical burdens. This solicitation, identified as W912EK26QA048, is a Small Business Set Aside under NAICS code 332410 and is open exclusively to small businesses. The presolicitation was posted on July 29, 2026, with proposals due by August 16, 2026. The work will be performed at the Starved Rock Lock and Dam in Ottawa, Illinois, with contract oversight managed by the Rock Island District of the Department of Defense. Primary points of contact for inquiries are Kate Behrens and Jeffrey Voss, both of whom can be reached via their official USACE email addresses. The opportunity is accessible through the SAM.gov workspace portal for potential bidders.

General Info

Replace Starved Rock boiler with Cleaver Brooks system; small business set aside; proposals due August 16, 2026.

Agency

Department Of Defense → W07V Endist Rock IslandView Agency

NAICS

332410 - Power Boiler and Heat Exchanger ManufacturingView NAICS

Place of Performance

Ottawa, IL, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W07V Endist Rock Island
Contacts2 people available
OfficeROCK ISLAND, IL, 61299-5001, USA
Organization / Agency
Department Of Defense → W07V Endist Rock Island
View Agency Profile
Office AddressROCK ISLAND, IL, 61299-5001, USA
Contacts

Full Description

Show more

The US Army Corps of Engineers has a requirement for a contractor to provide all equipment, materials, and labor to remove one existing steam boiler, supply and set in place one Cleaver Brooks M5 steam boiler, provide and install one new Cleaver Brooks condensate return boiler feed system and upgrade the water filtration system located on the dam at the Starved Rock Lock and Dam. 


The U.S. Army Corps of Engineers will provide the transportation and crane support required to get the new boiler from land to the doorway of the boiler house.

Similar Contracts

Same NAICS industry code

NAICS: 332410
New
Federal
FILTER UNIT,AIR PUR
Solicitation # N0010426QJB93
This contract, issued under Emergency Acquisition Authority, seeks repair services for the FILTER UNIT,AIR PUR with a mandatory Repair Turnaround Time of 59 days, measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. All repairs must adhere to the contractor’s approved technical procedures and comply with MIL-STD-130 Rev N for marking, and any design or part number changes require prior written approval from the NAVICP-MECH Contracting Officer. The contract is a firm-fixed-price arrangement, requires Government Source Inspection, and mandates that all items be repaired and accepted within the specified timeline to avoid per-unit, per-month price reductions, with a maximum deduction cap. Freight is FOB Origin and handled by the Navy under the CAV Statement of Work, and the contractor must submit detailed pricing, including comparisons to new unit costs and lead times, along with documentation if pricing deviates from historical levels. The contract includes extensive compliance requirements, such as adherence to Buy American provisions, cybersecurity maturity model certification, mandatory use of Workflow Pro, and a Small Business Subcontracting Plan. The awardee must be an authorized distributor of the original manufacturer’s item, with proof submitted at the time of quotation. Records of all inspections and testing must be maintained for 365 days after final delivery, and any asset deemed beyond repair may trigger a negotiated, not-to-exceed fee for testing and evaluation. The solicitation is issued under Navy Supply Systems Command, with a response deadline of August 5, 2026, and performance location tied to the Navy’s logistics network. All applicable standards and technical documents must be obtained through official DOD channels, and distribution of any provided materials is strictly controlled under specified distribution statement codes to safeguard sensitive technical data.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332410
New
DIBBS
COOLER, FLUID, INDUSTRIA
Solicitation # SPE8E8-26-T-4874
The contract specifies the procurement of three industrial fluid coolers with NSN 4420-01-376-1114 under solicitation SPE8E8-26-T-4874, a total small business set-aside for NAICS code 332410. Delivery is required within 160 days to the DLA Distribution San Diego facility at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with FOB origin terms and no variance allowed in quantity. The items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods using dry cold storage, sealed wood boxes with all openings plugged to prevent internal contamination, and marking per MIL-STD-129 with no special marking required. Palletization must follow DLA packaging requirements, and contact preservatives must adhere to the OEM’s direction. The coolers are designated as critical application items with potential covered defense information, and mercury or mercury-containing compounds are strictly prohibited unless in exempted components such as specified batteries, lamps, sensors, or weapon systems, with portable mercury-containing devices requiring shock-proof construction and secondary containment in accordance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The contract includes specific supplier data for Tranter PHE Inc with CAGE 64525 and part numbers UX-005-NAVAL-145480-1 and UX-056-UJ-60, and documentation for source approval requests must be submitted if proprietary information limits competition. The required ship date is January 18, 2027, with an original delivery deadline of April 7, 2027.
SAN DIEGO

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 332410
New
DIBBS
ROD SUBASSY, PROTECTOR
Solicitation # SPE8E8-26-T-4865
The contract is for the procurement of 138 units of ROD SUBASSEMBLY, PROTECTOR with NSN 4420-01-400-2671 under solicitation SPE8E8-26-T-4865, issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. It is a Firm-Fixed-Price contract with a total value of $19,044.00 at $138.00 per unit, awarded under a Total Small Business Set-Aside as defined by FAR 19.5 with NAICS code 332410. Delivery is required within 96 days after order placement, with FOB Origin terms and final delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, and all supplies must be packaged, preserved, and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including proper unit containers, preservation methods, and barcoding. Packaging must also meet DLA’s RP001 requirements, with no special marking required beyond standard compliance. The contract prohibits the intentional incorporation of mercury or mercury-containing compounds, except in specified functional applications such as batteries, fluorescent lights, sensors, and weapon systems, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. Hazardous materials must be labeled in compliance with OSHA’s Hazard Communication Standard and DFARS clauses, and no toxic or hazardous substances may be stored, treated, or disposed of without adherence to applicable regulations. Contractors must comply with cybersecurity requirements including the safeguarding of covered defense information and reporting cyber incidents under DFARS 252.204-7012 and NIST SP 800-171 assessment mandates. Electronic invoicing is mandatory through WAWF, and accelerated payments to small business subcontractors are required. All offers must be submitted via the DIBBS portal by August 10, 2026, and contractors must affirm their small business status, provide a UEI, and comply with employment eligibility verification, anti-trafficking, and equal opportunity provisions. Contract clauses include mandatory adherence to FAR and DFARS requirements on subcontracting, contract changes, inspection, default, and whistleblower rights, with deviations applied for certain clauses. No formal attachments are listed, but referenced
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 332410
New
DIBBS
COOLER, FLUID, INDUST
Solicitation # SPE8E8-26-T-4897
The contract involves the procurement of a fluid cooler for industrial use under solicitation SPE8E8-26-T-4897, issued by the Department of Defense through the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 4420-01-487-5667 and a part number D6285-G502, with a quantity of three units to be delivered in AY units. Delivery is required within 160 days after order placement, with an original delivery date of December 5, 2026, and a need ship date of January 18, 2027. All shipments must be FOB origin, meaning title and risk transfer to the government at the contractor’s shipping point. Packaging must strictly adhere to MIL-STD-2073-1E with a unit packaging code U, using fiberboard boxes, and preservation must employ aluminum foil wrap with desiccant, ensuring the items are clean and dry. Marking must follow MIL-STD-129, including mandatory 2D Data Matrix barcodes, with no special marking required. Palletization must conform to DLA’s RP001 packaging requirements, and all shipments must be addressed to the designated DDSP New Cumberland facility. The contract includes multiple federal and defense-specific clauses mandating compliance with hazardous material handling, cybersecurity, and labor standards. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Hazardous materials must be labeled according to 29 CFR 1910.1200 and documented on Safety Data Sheets, with exclusions only applying to materials regulated under specific federal statutes. The contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information and is subject to the Combating Trafficking in Persons clause. Invoicing is required exclusively through Wide Area WorkFlow, and payment is processed via DoDAAC codes. The solicitation applies to small businesses under NAICS 332410, and offerors must self-represent their size status and socioeconomic classifications such as HUBZone, WOS
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → W07V Endist Rock Island

Same awarding agency

NAICS: 237990
New
Federal
Galena 2024 Event PL84-99 Flood Repair
Solicitation # W912EK26BA010
The U.S. Army Corps of Engineers, through the W07V Endist Rock Island office, is soliciting bids for flood repair work in Galena, Illinois, under solicitation W912EK26BA010, with a proposed construction period during the 2026 season. The project involves storm sewer repairs at two specified locations: the intersection of Green and Water Street, where a new manhole will be constructed at the junction of a pressurized sewer line and a 30-inch storm sewer line, and the area around Hill and Water Street, where a 24-inch reinforced concrete pipe storm main will connect the City-owned manhole MH-86 to the Corps-owned manhole MH-89. Work includes replacing the existing brick structure at MH-86 with a standard concrete manhole, abandoning and grouting the Corps-owned pressurized storm line from headwall to new construction, and removing two damaged headwalls. All work will occur on public roads and city sewer easements, with performance taking place entirely within Galena, Illinois, ZIP 61036. The solicitation is exclusively set aside for 100% Women-Owned Small Businesses under NAICS code 237990, requiring offerors to be certified in SAM.gov as a Women-Owned Small Business and meet the SBA size standard of $41.5 million in average annual receipts. Proposals must be submitted via email to Contract Specialist Stanley L. Bolton no later than August 13, 2026, and are expected to reference detailed specifications, drawings, and other supporting documents provided with the solicitation. While the contract type is not explicitly stated, the nature of the work suggests a Firm-Fixed-Price arrangement, and payment, invoicing, and accounting details are not fully specified in the available text. The Government retains authority for inspection and acceptance at the site, with no additional special requirements such as security clearances, key personnel, or options identified beyond the WOSB set-aside condition.
Other Heavy and Civil Engineering Construction

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 611430
New
Federal
Construction Quality Management {CQM) for Contractors- Course Offering
Solicitation # W912EK26X2CQM
This course, titled Construction Quality Management for Contractors, is a mandatory training program designed to equip contractor personnel with the necessary knowledge and procedures for implementing the U.S. Army Corps of Engineers Construction Quality Management system, specifically for those seeking certification as Contractor Quality Control System Managers. The training spans 11 hours across two days, October 8 from 9:00 a.m. to 5:00 p.m. and October 9 from 9:00 a.m. to 12:00 p.m., held at the Davenport Public Library – Eastern in Davenport, Iowa. The class is limited to 20 participants and is delivered as a facilitated video course consisting of eight modules with submodules, each incorporating video segments, short readings, and interactive class discussions. Attendance is required for all sessions, and successful completion demands a passing score of 70 on a written exam administered at the conclusion, with a certificate issued to those who meet the criteria; the certificate remains valid for five years. Participants must access the course materials in advance via a provided online link, as no printed copies will be distributed in class. There is no cost to attend this course when conducted by the District Office, but registration is essential and subject to confirmation at least one week prior to the start date, with a minimum of six registrants required to avoid cancellation. Priority is given to contractors currently working on or preparing for active contracts within the Mississippi Valley Division. The solicitation number is W912EK26X2CQM, and the response deadline for registration is October 2, 2026, at 7:00 p.m. The primary point of contact for inquiries and registration is Bryce Iwinski, reachable at 309-794-5812 or bryce.e.iwinski@usace.army.mil. The training is sponsored by the Department of Defense through the Rock Island District Office, though the actual instruction occurs in Davenport, Iowa, aligning with the geographic focus of the Mississippi Valley Division’s operations.
Professional and Management Development Training

POSTED

3 days ago

DEADLINE

in 2 months
View Details
NAICS: 333912
New
Federal
1600 CFM Diesel Rotary Screw Compressor
Solicitation # W912EK26QA044
The U.S. Army Corps of Engineers is soliciting a single 1600 CFM trailer-mounted diesel rotary screw air compressor under solicitation W912EK26QA044, with a total small business set-aside under FAR 19.5 and NAICS code 333912. The compressor must meet strict performance specifications including a 150 psi standard and 200 psi high-pressure output, operate at no more than 85 dBA, and be powered by a Caterpillar C13B Tier 4 Final diesel engine. The unit requires included components such as a full fluid containment basin, aftercooler, cold weather pack, and DOT-compliant trailer, and must be factory-tested and delivered ready for immediate deployment. Delivery is due no later than 180 calendar days after contract award to USACE Building D at 25549 182nd Street, Pleasant Valley, Iowa, with FOB Destination terms meaning the contractor bears all transportation and packaging costs, which must be fully included in the quoted price. The contracting office is located at Rock Island, Illinois, and the point of contact for all solicitation inquiries is Bobbi S. Boeh, with Jeffrey R. Voss as secondary contact; questions must be submitted via email no later than July 23, 2026, at 2:00 PM CT. All proposals must be submitted electronically as PDFs and include technical documentation proving compliance, with no deviations or alternatives permitted. The contract will be awarded using a Lowest Price Technically Acceptable (LPTA) method, meaning proposals must pass a binary technical acceptability evaluation before pricing is considered, with the lowest-priced compliant offer selected. The contract is firm fixed price, and invoices must be submitted electronically through the Wide Area WorkFlow system in accordance with DFARS requirements. The government will perform final acceptance at the delivery location, with Michael Klemme designated as the administrative point of contact for delivery and invoicing. The solicitation has been amended to remove “oil free” from the header and description, and numerous FAR and DFARS clauses are incorporated, including those on cybersecurity, Buy American, payment acceleration for small business subcontractors, whistleblower rights, and prohibitions on procurement from Xinjiang. Offerors must have an active UEI and CAGE code, certify their small business status, comply with federal reporting requirements, and submit tax certifications if applicable. No MIL-STD packaging or marking standards are
Air and Gas Compressor Manufacturing

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 332999
Federal
ILWW Fabricated Steel Supply
Solicitation # W912EK26QA045
The US Army Corps of Engineers, Rock Island District, is seeking a small business to supply and fabricate steel components for the rejuvenation and modernization of the Peoria and LaGrange wicket dams along the Illinois Waterway. This project is vital to maintaining the efficiency of a key agricultural transportation corridor that supports global food supply chains, making it a matter of national and international significance. The contractor is responsible for providing all necessary steel materials and fabrication services to complete a backlog of wicket gates, with the USACE handling only the coating and final assembly; no steel, personnel, equipment, or additional components will be furnished by the government unless explicitly stated. Solicitation number W912EK26QA045, posted on July 22, 2026, with a response deadline of August 12, 2026, is a total small business set-aside under FAR 19.5, targeting NAICS code 332999 for other fabricated metal product manufacturing. The contract is managed by the Illinois Waterway Project Office, with primary point of contact Joseph Porter reachable at 309-794-5333 or joseph.e.porter@usace.army.mil. The work will be performed in Rock Island, Illinois, and all vendors must be certified small businesses eligible for the set-aside. The contract requires full compliance with federal procurement standards and delivery of materials meeting exact engineering specifications to ensure the dams operate reliably for decades to come.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

8 days ago

DEADLINE

in 13 days
View Details