Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Steel Decking

Active

State & Local

Response Deadline11/19/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the City of Austin in Texas involves the installation of structural steel floor or roof decking for prime contractors on public works projects. The work must be performed in accordance with Section 05 31 00 and is specifically for projects funded through DOT financial assistance, with the ultimate goal of delivering a fully installed steel deck system. The solicitation was posted on October 19, 2026, and requires responses to be submitted by November 19, 2026. This project falls under NAICS code 238120, focusing on structural steel erection. Interested parties can find further details through the City of Austin's financial online portal.

General Info

City of Austin subcontract for structural steel decking installation on public works projects.

Agency

Texas → City of Austin

NAICS

238120 - Structural Steel and Precast Concrete Contractors

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of CLM1141.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

John Trevino Jr. Metro Park - Phase I Development

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 19

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 08:00:00 PM UTCin 22 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → City of Austin

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas → City of Austin

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs steel decking for prime contractors on public works projects funded by DOT financial assistance. Installs structural steel floor or roof decking per Section 05 31 00. Delivers installed steel deck system.

Similar Contracts

Same NAICS industry code

Structural and Architectural MetalsThis subcontract for Structural and Architectural Metals involves the fabrication and installation of structural steel and decorative metal deterrents for facility projects at the University of Baltimore. The selected contractor will work under prime contractors to deliver steel framing and architectural metalwork, ensuring all installations comply with Division 05 and Division 05 70 30 standards. The opportunity was posted on October 28, 2026, with a response deadline of December 2, 2026. Classified under NAICS code 238120, the project focuses on essential metal infrastructure and specialized deterrents across the university campus in Maryland.

University of Baltimore

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Structural Steel ErectionThis subcontract for structural steel erection involves the supply and installation of the structural steel frame for an athletic performance addition at the Mississippi Gulf Coast Community College in Perkinston, MS. The selected contractor will be responsible for the hoisting, bolting, and welding of all structural members in strict accordance with engineering specifications to deliver the completed structural skeleton of the facility. The project is categorized under NAICS code 238120 and is managed through MPTAP. Interested parties should note the tight turnaround for responses, with the solicitation posted on October 28, 2026, and the response deadline set for October 29, 2026.

POSTED

about 10 hours ago

DEADLINE

in about 14 hours

Provision of Structural Repairs and Planned Maintenance to Blackpool Tower Winter 2026/7 and Summer 2027

Solicitation # ocds-h6vhtk-078f6c

Blackpool Borough Council is seeking a qualified Remedial Works Supplier to provide structural repairs and planned maintenance for Blackpool Tower, with an estimated total value of 4,000,000 GBP including VAT. The project is divided into three phases: a Winter Works package from November 2026 to March 2027 during operational closure, a Summer Works package from April 2027 to November 2027 during the operating season, and ongoing ad-hoc maintenance beyond November 2027 based on annual surveys. The initial period of performance runs from November 30, 2026, to November 29, 2027, with a possible one-year extension to November 29, 2028. The contract is an open competition with award criteria weighted at 50 percent Quality, 40 percent Price, and 10 percent Social Value. Mandatory requirements include IRATA level 3 qualified supervisors, IRATA level 1 or 2 technicians, and project managers who are Chartered Members of the Institution of Civil Engineers or Institution of Structural Engineers. Suppliers must maintain insurance coverage of 10 million GBP for Employer's Liability and Public Liability, and 5 million GBP for Professional Indemnity. All work must adhere to strict technical and safety standards, including BS EN 1090 Execution Class 3 for steel structures, CDM 2015, and the Work at Height Regulations 2005. The deadline for tender submissions is November 20, 2026.

Blackpool Borough Council

POSTED

about 12 hours ago

DEADLINE

Certified Welder / Steel Repair ContractorThis subcontract opportunity is for a Certified Welder or Steel Repair Contractor to perform specialized welding repairs for the Town of Hopkinton DPW tank projects. The selected contractor will work under prime contractors to remediate corrosion and metal loss on welded steel tank bodies and related components. The scope of work specifically requires the execution of pit and fill welding using AWS-certified methods to ensure all repaired surfaces are free of structural defects and corrosion pits. Strict adherence to safety regulations is mandatory, including OSHA standards for confined spaces and welding safety. Interested parties must submit their responses by November 18, 2026. This project falls under NAICS code 238120 and is focused on delivering high-quality structural remediation for municipal infrastructure in Massachusetts.

Town of Hopkinton

POSTED

about 14 hours ago

DEADLINE

Structural Steel and MetalsThis subcontract for Structural Steel and Metals involves the fabrication and erection of a structural steel frame for a school addition project under the Henry County Board of Education in Georgia. The selected contractor will be responsible for installing essential components, including steel beams, columns, joists, and metal decking, to deliver a completed structural steel skeleton for the prime contractor. The opportunity was posted on October 28, 2026, with a response deadline of December 3, 2026. Classified under NAICS code 238120, this project focuses on specialized structural steel work to support the expansion of educational facilities within Henry County.

Henry County Board of Education

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Marine Metal Fabrications & Mooring SystemsThis small business set-aside subcontract, titled Marine Metal Fabrications and Mooring Systems, involves the fabrication and installation of structural metal components for prime contractors working on USACE Detroit District marine projects. The scope of work specifically includes the delivery and installation of mooring bollards, bollard anchors, metal ladders, and grab rails. Due to the nature of the installation, the contractor must provide certified welding services and utilize heavy lifting equipment for the precise placement of bollards. Managed by the Department of Defense under the W072 Endist Detroit agency, the project falls under NAICS code 238120. The solicitation was posted on October 28, 2026, with a response deadline of December 1, 2026. Performance of the contract is centered in the 55802 zip code area, focusing on the delivery of critical mooring and safety hardware.

W072 Endist Detroit

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Metal and Wood Structural FramingThis subcontract opportunity involves the fabrication and installation of metal and wood structural elements for prime contractors working on United States Air Force facility projects at Wright-Patterson Air Force Base. The scope of work specifically covers cold-formed metal framing under Division 05 40 00 and rough carpentry and wood framing under Division 06 10 00, with a primary focus on delivering structural framing and interior wall supports. Managed by the Department of Defense under the AFLCMC PZIO agency, this project is designated as a total Small Business Set Aside under NAICS code 238120. The solicitation was posted on October 28, 2026, with a response deadline set for December 11, 2026. Performance of the contract will take place within the 45433 zip code area.

FA8601 Aflcmc Pzio

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Structural Metals and RailingsThis 8(a) set-aside subcontract, managed by Navfacsyscom Mid-Atlantic for the Department of Defense, involves the fabrication and installation of structural steel and metal railings at Building 592 in Philadelphia. The scope of work requires the delivery of installed structural steel frames and safety railings, utilizing carbon structural steel, zinc-coated pipe, and hot-dip galvanized coatings. All welding and installation must strictly adhere to AISC and AWS D1.1 standards. The opportunity is categorized under NAICS code 238120. Interested parties should note that the response deadline is December 1, 2026. The project focuses on providing high-quality metal components for prime contractors operating on USACE/NAVFAC facility projects.

Navfacsyscom Mid-Atlantic

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Pre-Engineered Metal Buildings (PEMB) Fabrication & ErectionThis subcontract opportunity involves the fabrication and erection of pre-engineered long-span metal buildings for prime contractors supporting NAVFAC Mid-Atlantic projects. The scope of work specifically requires the installation of low-rise structures and structural columns for the GSE Warehouse and the MSU Compound at MCAS Cherry Point, with the final deliverable being the completed structural shells. The project falls under NAICS code 238120 and is associated with the Department of Defense. Interested parties should note that the response deadline is November 12, 2026, for work to be performed in Cherry Point, North Carolina.

Navfacsyscom Mid-Atlantic

POSTED

about 16 hours ago

DEADLINE

Corpyard Phase II Connex Structural Anchoring & Welding: (Rebid)

Solicitation # 26-091-ITB

The City of West Sacramento has issued solicitation 26-091-ITB for the Corpyard Phase II project, which requires the structural anchoring and welding of 14 existing shipping containers to a cement-treated asphalt surface. The scope of work includes container pre-checks, drilling and hole cleaning, the installation of Bolthold asphalt substrate, bolting down ASTMA36 plates using epoxied steel rods, and performing AWS welding to secure the plates to the container framing. To prevent corrosion, the contractor must apply a zinc-rich cold galvanizing rust-inhibiting coating. All work must be performed by a licensed contractor holding a current California C-51 or C-60 license and must adhere to PSE stamped drawings, structural calculations, and standards including ASCE 7-22, CBC 2022, and AISC 360-16. Final acceptance is contingent upon a successful inspection by the City's Building department. The estimated project value is 35,000 dollars, and the contract will be awarded to the lowest responsive and responsible bidder. Bids must be submitted electronically via the OpenGov portal by November 10, 2026, at 1:00 pm, and must include a bid security of at least 10 percent of the total bid price. The successful bidder is required to provide performance and payment bonds equal to 100 percent of the contract price and must comply with California prevailing wage requirements and DIR registration. Additionally, the contractor must utilize the Virtual Project Manager system for submittals and maintain comprehensive insurance coverage, including Commercial General Liability and Workers Compensation. As a federal-aid construction project, the contract mandates strict adherence to FHWA-1273 provisions, including nondiscrimination and equal employment opportunity policies.

Capital Projects - Construction

POSTED

about 17 hours ago

DEADLINE

EVA DELL BARRIER ACCESS GATES

Solicitation # MS27-052

The City of Victorville is soliciting competitive bids under solicitation MS27-052 for the fabrication and installation of four steel barrier access gates at Eva Dell Park. The project requires a licensed C-13 contractor to provide all labor and materials to install one 31-foot gate, one 35-foot gate, and two 37-foot gates, all constructed from Schedule 40 steel pipe. The contract will be awarded to the lowest responsible bidder who attends the mandatory pre-bid meeting and site walk held on November 10, 2026. Final responses are due by December 3, 2026. As a project funded by the Community Development Block Grant (CDBG) program, strict compliance with the Davis-Bacon Act and California state prevailing wage laws is required, with the higher of the two rates applying. Contractors must submit weekly certified payroll reports using Form WH-347 and adhere to Build America, Buy America (BABA) provisions and California Air Resources Board regulations. Additionally, the successful bidder must divert at least 65 percent of non-hazardous construction and demolition debris from landfills. Financial security requirements include a bid guarantee of at least 10 percent of the total proposal amount, with the winning contractor required to provide Faithful Performance and Payment Bonds for 100 percent of the contract price. The contractor must also provide a guaranty bond covering defective materials or workmanship for twelve months following City acceptance. Compliance with the Americans with Disabilities Act (ADA) and various federal and state non-discrimination and affirmative action policies is mandatory.

City of Victorville

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Pipe and Tube Railing InstallationThis subcontract agreement involves the supply and installation of pipe and tube railings for DPA Capital Construction projects located in Denver, Colorado. The selected contractor is responsible for delivering and installing safety railings at the entrance area in strict accordance with Section 05 52 13 and all applicable ADA accessibility requirements. The opportunity is categorized under NAICS code 238120 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 6, 2026.

DPA - Capital Construction/controlled Maintenance

POSTED

about 22 hours ago

DEADLINE

More opportunities from Texas → City of Austin

Same awarding agency

Supply of Ventilation Air Pre-filters (LM6000 Units)

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Filter Ventilation Air Prefilter for LM6000

Solicitation # 1100 AGM1035

Solicitation IFQ 1100 AGM1035, issued by the City of Austin Purchasing Office on October 22, 2026, seeks a contractor to supply 216 ventilation air pre-filters for LM6000 Units 1-4. The required items are specified as Clarcor pre-filters with dimensions of 650W x 580H. Award will be granted to the lowest offer that meets all minimum qualifications and technical specifications. Offerors must submit a signed Offer Sheet and a Price Sheet, including descriptive literature for any products not explicitly referenced in the solicitation to avoid disqualification. The contract is governed by the laws of the State of Texas with venue in Travis County. Delivery terms are FOB Destination, Prepaid and Allowed, and payments will be processed within thirty days of invoice submission. Contractors must comply with strict marking requirements for all shipments and provide Safety Data Sheets for any hazardous materials. Additionally, awarded vendors must adhere to City of Austin non-discrimination policies, certify they have not been adjudicated for wage theft within five years, and complete mandatory Wage Theft Training within 30 days of the award. All goods must be merchantable and free from defects, with the City of Austin retaining the right of inspection and rejection.

POSTED

DEADLINE

Supply of LM6000 Ventilation Bag FiltersThis subcontract involves the supply of specialized ventilation bag filters for prime contractors working on City of Austin power plant projects. The scope of work requires the sourcing or manufacture of 400 filter units measuring 580H x 620W x 700D, specifically matching Clarcor Inc. part numbers SN7/L1040 or SN7/L1049. The contractor is responsible for delivering the units FOB Destination to the Sand Hill Energy Center and must provide OSHA Form 20 Safety Data Sheets for any hazardous materials involved. This procurement falls under NAICS code 423830 and supports Austin Energy infrastructure.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Filter Ventilation Bag for LM6000

Solicitation # IFQ 1100 AGM1034

Solicitation IFQ 1100 AGM1034 is an invitation for quotation issued by the City of Austin, Texas, for the procurement of 400 ventilation bag filters for LM6000 units 1-4. The required filters must meet specific dimensions of 580H x 620W x 700D and adhere to strict quality standards, being merchantable and free from defects. The contract is awarded to the lowest offer that meets all minimum qualifications, with evaluation based on individual line items, categories, or aggregate pricing. All quotes must be submitted on an FOB Destination basis, with prices inclusive of all handling and shipping charges to the Austin, Texas area. The agreement is governed by the laws of the State of Texas with venue in Travis County. Key administrative terms include a thirty-day payment cycle and a requirement for contractors to provide notice of force majeure events within three business days. Contractors must comply with various City of Austin mandates, including the Wage Theft Ordinance, non-discrimination certifications, and the Lone Star Infrastructure Protection Act. Additionally, for any hazardous materials, contractors must provide OSHA Form 20 Safety Data Sheets with each shipment. Packaging must be clearly marked with the City's name, address, contents, and the applicable contract number.

POSTED

DEADLINE

Deadend Compression Terminal Hardware SupplierThis subcontract involves the supply of specialized deadend compression hardware for prime contractors working on City of Austin utility projects. The scope of work requires the delivery of 36 units of stainless steel terminal hardware, specifically matching part number HPS / SEDA3313SDSS for ACSR/SD 795 Condor conductors. The hardware must feature a single tongue eye, a 200 degree Fahrenheit maximum operating temperature, and an EHV rating. All provided materials must be COA Approved and delivered FOB Destination. The contract is categorized under NAICS code 335929 and is associated with the City of Austin in Texas.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

DE, COMP, ACSR/SD 795 CONDOR, EYE, SNGL TNG, EHV, SS

Solicitation # IFQ 1100 CPG1090

The City of Austin is soliciting quotations under IFQ 1100 CPG1090 for the procurement of specialized electrical hardware, specifically Deadend Compression ACSR/SD 795 Condor components with reference part number HPS / SEDA3313SDSS. The items must be COA approved and meet all applicable federal, state, and local laws and regulations. Award will be granted to the lowest offer that meets all minimum qualifications, with the City evaluating quotes based on individual line items, categories, or aggregate pricing. The contract requires the contractor to provide goods that are merchantable, free from defects, and fit for their intended purpose. Deliveries must be FOB Destination and include all handling and shipping charges. Packaging must be clearly marked with the City's name, address, contents, and the applicable contract number. Payment will be issued within thirty days of invoice submission to the City's authorized contact. Offerors must provide several certifications, including non-debarment, compliance with discriminatory employment practices, and adherence to the Lone Star Infrastructure Protection Act regarding critical electrical grid equipment. Additionally, contractors must certify they do not engage in LGBTQ+ conversion therapy and comply with the City's wage theft program. All shipments must adhere to U.S. Department of Transportation and Environmental Protection Agency regulations for hazardous substances.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Government Funding & Grant StrategistThe Government Funding and Grant Strategist subcontract provides professional funding services for prime contractors working on City of Austin legislative projects. The selected provider is responsible for researching grant opportunities, developing comprehensive funding strategies, and coordinating directly with legislative offices to secure necessary appropriations or earmarks. This role requires specialized expertise in state and federal funding cycles and the intricacies of the grant application process. Key deliverables include the submission of funding applications, the identification of viable grant opportunities, and the production of detailed funding strategy reports. This opportunity is categorized under NAICS code 541611 and is associated with the City of Austin in Texas. Interested parties should note the response deadline of October 30, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

State Legislative Representative / LobbyistThis subcontract opportunity with the City of Austin seeks a State Legislative Representative or Lobbyist to provide professional engagement and advocacy for prime contractors on government relations projects. The selected provider will be responsible for monitoring state bills, testifying before state committees, and maintaining active engagement with Texas state legislators and agency heads to deliver comprehensive reporting on state regulations. Qualified candidates must possess deep expertise in Texas state legislative processes and maintain current registration as a lobbyist with the Texas Ethics Commission. This role falls under NAICS code 541620 and requires a specialized ability to navigate state-level legislative advocacy to support the interests of the City of Austin.

Environmental Consulting Services

POSTED

DEADLINE

Federal Legislative Representative / LobbyistThis subcontract opportunity is for a Federal Legislative Representative or Lobbyist to provide professional engagement and lobbying services for prime contractors on City of Austin government relations projects. The selected provider will be responsible for influencing legislation and policy by engaging with members of Congress, federal agency officials, and various federal departments. To be successful, the contractor must possess established relationships within Congressional offices and the U.S. Federal Government. Key deliverables include legislative advocacy, policy influence, and the submission of regular activity reports. All work performed under this contract must strictly comply with the Lobbying Disclosure Act. The solicitation was posted on October 26, 2026, with a response deadline of October 30, 2026, falling under NAICS code 541620.

Environmental Consulting Services

POSTED

DEADLINE

State & Federal Lobbyists - Pre-Solicitation Meeting

Solicitation # RFI 4200 BRS6005

The City of Austin is seeking qualified individuals or firms to provide professional legislative and funding services. The scope of work involves representing the city's interests through professional lobbying and engagement with various government bodies, agencies, departments, and offices at both the state and federal levels. This current opportunity, identified as RFI 4200 BRS6005, is in the pre-solicitation phase. A notification was issued on October 26, 2026, with a response deadline of October 30, 2026. This phase is intended to provide prospective offerors with an overview of the RFP process and an explanation of how proposals will be evaluated. No proposals are being accepted at this time, and no procurement decisions will be made during this initial meeting stage. Bridney Stewart serves as the Procurement Specialist IV and primary point of contact for solicitation questions.

Public Relations Agencies

POSTED

DEADLINE

Mechanical Installation of Air CompressorsThis subcontract for the Mechanical Installation of Air Compressors involves the installation of new air compressor units for prime contractors on projects within the City of Austin Convention Center Department. The selected provider is responsible for verifying site conditions, managing the physical placement of equipment, and ensuring all voltage and phase connections adhere to manufacturer and City specifications to deliver a fully operational system. Qualified candidates must possess the necessary mechanical and electrical licensing and provide their own rigging equipment. The solicitation was posted on October 26, 2026, with a response deadline of December 1, 2026. This opportunity falls under NAICS code 238220 and is managed by the City of Austin in Texas.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Industrial Air Compressor Equipment SupplierThis subcontract opportunity is for an Industrial Air Compressor Equipment Supplier to provide manufacturer-authorized new air compressor units for prime contractors working on City of Austin Convention Center Department projects. The selected supplier must be an authorized dealer for the specified manufacturer and is responsible for delivering units that meet precise technical requirements, including specific horsepower, CFM, operating pressure, and voltage/phase configurations. In addition to the hardware, the supplier must provide all associated technical specifications and warranty documentation. This procurement is categorized under NAICS code 423830, with a response deadline set for December 1, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

Structural Steel Fabrication and Installation

City of Inglewood

POSTED

CLOSED

Steel Decking and Metal Framing Subcontractor

STATE OF CALIFORNIA DEPARTMENT OF TRANSPORTATION

POSTED

DEADLINE

Pre-Engineered Metal Building Fabrication & Installation

California Department of Transportation

POSTED

DEADLINE

in about 1 month

Concrete Meter Vault (Three (3) Year Multiyear Contract)

Solicitation # 2026-142-ITB

Purchasing & Contracting

POSTED

DEADLINE

Steel Corrosion Removal and Component Replacement

City of Asheville

POSTED

DEADLINE

Steel Roof Deck Repair

Berkley School District

POSTED

DEADLINE

Structural Steel & Miscellaneous Metals

Construction Management

POSTED

DEADLINE

Structural Steel & Metals

Muskegon Public Schools

POSTED

DEADLINE

Bridge Bearing and Gland Replacement

Hennepin County

POSTED

DEADLINE

Structural Steel & Metal Fabrication

Chicago Public Schools

POSTED

DEADLINE

Structural Steel and Metal Decking

POSTED

DEADLINE

Specialized Structural Steel Fabrication & Erection

New Mexico Department of Transportation

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS