Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STIFFENER, AIRCRAFT

Active
SPE4A5-26-T-297AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of a single aircraft stiffener, identified by NSN 1560-01-738-3207 and part number 74A328371-2004, with a delivery requirement of one unit to be delivered FOB origin within 405 days of the contract award, targeting a need ship date of September 7, 2027. All procurement and packaging must comply with DLA-specific requirements including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for packaging standards, with no special marking required. The item does not have a shelf life and is exempt from Unique Item Identification under DFARS 252.211-7003(c)(1)(i). Quality assurance is governed by non-tailored higher-level requirements per ISO 9001:2015, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance criteria unless otherwise specified. Measuring and test equipment must be calibrated and traceable, and all technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the point of delivery. The solicitation number is SPE4A5-26-T-297A, issued by the Department of Defense’s ASC Supplier Operations OEM Division, with a response deadline of July 28, 2026, and a primary point of contact available for inquiries.

General Info

One aircraft stiffener to be delivered FOB origin by September 7, 2027, per DLA packaging and quality standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

000000View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-297A DLA Aviation Jul 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Jamie Bonda
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STIFFENER,AIRCRAFT
STIFFENER,AIRCRAFT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE BOEING COMPANY 76301 P/N 74A328371-2004
SPE4A5-26-T-297A
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017529180 0001 EA 1.000
NSN/MATERIAL:1560017383207
DELIVERY (IN DAYS):0405
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A5-26-T-297A
SECTION B
PR: 7017529180 PRLI: 0001 CONT’D
Need Ship Date:09/07/2027 Original Required Delivery Date:09/07/2027
SPE4A5-26-T-297A NSN/Part Number: 1560-01-738-3207 Quantity: 1 EA Purchase Request: 7017529180QTY: 1 Delivery: 405 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 000000
New
DIBBS
BEARING, SLEEVEThe contract pertains to the procurement of a sleeve bearing identified by part number MB1015DU and NSN 3120-01-212-3511, with a quantity of eight units to be delivered under solicitation SPE4A6-26-T-08MB. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition size. The item is subject to DLA packaging standards under RP001 and must comply with MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking required. Unit of issue is each, and delivery is FOB origin with zero variance allowed in quantity. The required delivery date is 171 days from the contract award, with an original deadline of May 17, 2027, and a needed ship date of January 17, 2027. Inspection and acceptance occur at the destination, and the item is not required to be uniquely identified. The packing method specified is dry preservation with class E5 intermediate containers and D3 unit containers. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics are governed by specified DLA procedural notes. The contract was issued by the Department of Defense, Asc Commodity Division, with Marion Williams as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 000000
New
DIBBS
PAD, CUSHIONINGThe contract involves the procurement of PAD, CUSHIONING with NSN 5340-01-738-1728, under solicitation SPE7L1-26-T-861E, requiring two units for delivery to the USS FLORIDA SSGN 728 at FPO AA 34091. Delivery must occur within 20 days of award, with FOB destination terms, inspection and acceptance occurring upon arrival, and no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking and palletization following DLA’s packaging requirements. The item must not contain any Class I ozone-depleting chemicals, and any substitute chemical requires prior approval. Identification marking must adhere to MIL-STD-130N, and all supplies must retain government identification unless rejected. Shipment must be sent via the fastest traceable means—parcel post is prohibited. The vendor is expected to use the Defense Logistics Agency’s validation and tracking systems, and all technical standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date. The contracting office is the Department of Defense’s Land Supply Chain, with primary point of contact Michael Nordahl, and the original required delivery date is July 16, 2026.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 000000
New
DIBBS
WIRING HARNESSThe contract pertains to the procurement of a wiring harness identified by part number 06307-06813-102 and NSN 5995-01-666-7554, with a quantity of two units required. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including adherence to ISO 9001:2015 for quality management and compliance with DLA Packaging Requirements for Procurement. The supplier must retain complete supply chain traceability documentation as mandated by DLA Directive Procurement Note C03, though Item Unique Identification is not required per customer request. Sampling for acceptance follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed the standards of ASQ H1331 or MIL-STD-1916. The item has no shelf life restriction, and all packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. Packaging must also adhere to palletization guidelines under RP001. Delivery is required FOB origin within 303 days of contract award, with inspection and acceptance occurring at destination. The contracted unit price is $2.00 per unit, totaling $4.00 for the order. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation must comply with DLAD Procurement Notes C19 and C20. The supplier must perform a CMMC Level 2 self-assessment and submit documentation as part of a Source Approval Request. Any deviations, waivers, or configuration changes require formal engineering change proposals or variance requests. The contract’s solicitation number is SPE4A6-26-T-08UN, with a response deadline of July 29, 2026, and a required ship date of May 29, 2027. The contracting officer is Tammy Ballard, and all documentation must reference the authorized DoD unit of issue as defined in official DLA resources.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 000000
New
DIBBS
COMPOSITE REPAIR SEThe contract concerns the procurement of 17 units of a composite repair system identified by NSN 4920-01-738-1779 and part number HCS8806 from HEATCON COMPOSITE SYSTEMS, INC., under solicitation SPE4A5-26-T-304D, which is a Total Small Business Set-Aside. Delivery is required within 318 days from contract award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the origin, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the specified packaging method, preservation, and container type. Palletization must adhere to DLA’s RP001 requirements, and no special marking is required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of June 13, 2027. Transportation and freight details are governed by DLAD procedural notes C19 and C20. The contract was posted on July 21, 2026, with a response deadline of July 29, 2026, and the point of contact is Hien-Van Trinh of the Department of Defense’s ASC Supplier Operation OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 000000
New
SLED
Subcontract Opportunity Decomposition Not AvailableThe subcontract opportunity cannot be decomposed due to a configuration error, preventing access to the prime contract details necessary for further analysis. The opportunity was posted on July 20, 2026, with a response deadline of August 18, 2026, and is associated with the City of Charlotte in North Carolina. No solicitation number, set-aside type, NAICS code, or organizational information is available, and the place of performance and point of contact details are not provided. The only identifiable link directs to a Bonfire Hub platform for potential bidders to access the opportunity, though no specific requirements or specifications are accessible due to the system limitation.
City Of Charlotte

POSTED

2 days ago

DEADLINE

in 27 days
View Details
NAICS: 000000
New
DIBBS
Subcontract Opportunity Decomposition Not AvailableThe subcontract opportunity cannot be fully decomposed due to insufficient access to critical details from the prime contract, including the Statement of Work, Contract Line Item Numbers, agency-specific metadata, and other essential information required for meaningful analysis. As a result, potential suppliers are unable to assess the scope, requirements, or eligibility criteria for participation. The opportunity is linked to the Defense Logistics Agency under the Department of Defense, but no specific office location, point of contact, or place of performance is provided. The NAICS code is listed as 000000, indicating a lack of classification, and no set-aside status or solicitation number is available. The only actionable reference is a DIBBS system link, which may contain limited data without access to the underlying prime contract documents.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 000000
New
DIBBS
Subcontract Opportunity Decomposition Not AvailableA subcontract opportunity has been posted by the Defense Logistics Agency under the Department of Defense with a posted date of July 20, 2026, and a response deadline of July 31, 2026. The place of performance is identified as Fresno, California, with a zip code of 93727-0000, though no other location details are provided. The solicitation number is SPE8E526T3634, accessible via a provided URL, but no specific NAICS code, set-aside information, or organizational type is available. The prime contract details could not be retrieved due to a configuration error, which has prevented the decomposition of the opportunity into potential subcontract opportunities. No point of contact information is listed, and key fields such as agency office address, state, and country are unspecified.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 000000
New
DIBBS
Unable to decompose subcontract opportunitiesThe contract titled “Unable to decompose subcontract opportunities” was posted on July 20, 2026, with a response deadline of July 23, 2026, and is categorized as a subcontract under the Department of Defense, with the agency listed as SAN DIEGO. The place of performance is identified as SAN DIEGO, CA, with a zip code of 92136-3581, though no specific city, state, or country details are provided beyond that. The NAICS code is listed as 000000, indicating no valid classification could be assigned, and no set-aside type or description is available. The system was unable to retrieve critical contract components such as the Statement of Work, CLINs, or supporting metadata due to a configuration error, preventing the identification or structuring of any viable subcontract opportunities. The point of contact is not listed, and while a UI link is provided for the solicitation, no actionable details or requirements can be derived from the available data.
SAN DIEGO

POSTED

2 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 000000
New
DIBBS
Subcontract Opportunity Decomposition UnavailableA subcontract opportunity is available under a Service-Disabled Veteran-Owned Small Business Set-Aside, with the prime contractor managed by the Fluid Handling Division of the Department of Defense. The opportunity is posted for a place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, though no specific city, state, or country details are provided beyond that. The solicitation was posted on July 20, 2026, and responses are due by July 23, 2026. Despite the posting, full details necessary to decompose subcontract and supplier opportunities are unavailable, including the Statement of Work, CLINs, and associated metadata, which restricts potential bidders from assessing specific requirements or workload breakdowns. The NAICS code is listed as 000000, indicating no classification has been assigned. The opportunity can be accessed via a DIBBS portal link, but no point of contact information is provided to assist with inquiries.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 000000
New
DIBBS
Subcontract Opportunity Decomposition Unavailable
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 000000
New
DIBBS
Unable to Decompose Subcontract OpportunitiesDue to a configuration error where the FOUNDRY_API_URL was not set, the prime contract details could not be accessed, preventing any identification or structuring of subcontract opportunities. As a result, this posting cannot be decomposed into actionable subcontract solicitations despite being listed under a Total Small Business Set-Aside as defined by FAR 19.5. The solicitation, posted on July 20, 2026, with a response deadline of July 23, 2026, is associated with the Maritime Supply Chain under the Department of Defense, but lacks critical information including NAICS code, point of contact, office address, and place of performance. The posting is accessible via a DIBBS link, yet no meaningful subcontract opportunities can be derived or pursued until the underlying configuration issue is resolved and prime contract data becomes available.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 000000
New
DIBBS
Unable to Decompose Subcontract OpportunitiesThe contract cannot be evaluated due to a technical configuration error that prevents retrieval of prime contract details, specifically because the FOUNDRY_API_URL is not set. As a result, no subcontract opportunities can be identified, structured, or analyzed. The system displays a placeholder title indicating the inability to decompose subcontract opportunities, with no valid solicitation number, set-aside information, or NAICS code provided. Although the agency name is listed as the Defense Logistics Agency under the Department of Defense, critical fields such as office address, place of performance, and point of contact are all empty. The posted date is indicated as July 20, 2026, but no meaningful data accompanies it. The only actionable element is a generic UI link directing to a DIBBS award record, which cannot be used to derive contract specifics without the underlying prime contract data.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET AND SEAL SETThe contract pertains to the procurement of a GASKET AND SEAL SET with NSN 5330-01-308-3522, designated as a Navy Critical Safety Item, requiring strict adherence to technical, quality, and security protocols. Compliance is governed by referenced DLA Master List requirements identified by R and I numbers, with applicable revisions tied to either the solicitation or award date depending on acquisition size. The supplier must meet stringent documentation mandates including a Source Approval Request, Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and adherence to DLA packaging standards. Inspection and acceptance occur at origin, with non-accepted items requiring removal of government identification, and all items must be physically marked per RQ017, including contractor and manufacturer CAGE codes, part number, and lot or serial number, though Item Unique Identification is not required. Sampling follows MIL-STD-1916 or ASQ H1331 with zero defects permitted unless otherwise specified, and measuring equipment must comply with RT001 standards. All technical data is controlled under ITAR or EAR, prohibiting export without authorization and restricting access to contractors with approved JCP certification, completed DOD export training, and DLA approval. DFARS 252.225-7048 applies to all technical data handling. Packaging and marking must conform to MIL-STD-129, and any waivers or deviations require formal approval from the DSC Contracting Officer. Delivery is due within 333 days after contract award.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
New
DIBBS
TRANSDUCER, MOTIONAL PIThe contract is for the procurement of three transducers, motional PI, identified by NSN 6695-01-737-0929, under solicitation SPE4A5-26-Q-0640, with a response deadline of August 5, 2026, and a delivery requirement of 136 days after award. The item is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the contractor must comply with DLA packaging standards, configuration change management procedures, and documentation requirements for source approval requests. Technical data associated with the transducer is controlled under export regulations, either ITAR or EAR, and its disclosure to foreign persons—even within the United States—is strictly prohibited without prior authorization from the Department of State or Department of Commerce; DFARS 252.225-7048 governs this restriction. Access to this controlled data is limited to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD export control training, and have received formal approval from DLA. Additionally, all supplies must be properly marked per physical identification requirements, and government identification must be removed from non-accepted items. The contract falls under a federal acquisition with performance location in Tracy, California, and primary point of contact is Hannah Song of the Department of Defense’s ASC Supplier Operations OEM Division.

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
New
DIBBS
SHAFT, TURBINE, AIRCRAFTThe contract pertains to the procurement of two aircraft gas turbine engine turbine shafts, identified by NSN 2840-00-837-2071 and part number 3011095, manufactured by Pratt & Whitney Canada Corp and sourced through the Canadian Commercial Corporation. This is a Critical Safety Item designated by the Air Force, subject to stringent quality and cybersecurity controls including CMMC Level 2 self-assessment and compliance with SAE AS9100 for non-tailored higher-level quality requirements. Manufacturing must follow a forging process, requiring specialized tooling, and all supplies must adhere to MIL-STD-129 marking standards with lot and serial numbers, contractor and manufacturer cage codes, and part numbers included on each unit pack. Inspection and acceptance occur at origin under zero-defect sampling principles per MIL-STD-1916 or comparable zero-based plans, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Tooling and sourcing inquiries must be directed to designated DLA supply chain teams. The item must be packaged per MIL-STD-2073-1E with specified preservation methods and materials, and palletized according to DLA packaging requirements. Delivery is due in 88 days after award under a firm fixed price structure with no tolerance for quantity variance. All waivers or deviations require formal approval from the DSC Contracting Officer, and the item is subject to Covered Defense Information protocols and government identification removal procedures for non-accepted items.

POSTED

about 3 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
BEZEL, INSTRUMENT MOUNTThe contract specifies the procurement of a single unit of a BEZEL, INSTRUMENT MOUNTING with NSN 6695-01-122-7941 and part number AM11085, manufactured by ONTIC ENGINEERING & MANUFACTURING UK. The item is classified as a critical application component and must comply with a range of technical, quality, and packaging standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Packaging and palletization must conform to DLA’s procurement requirements, and the item is subject to zero tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery required FOB origin within 171 days of contract award, targeting January 18, 2027, as the needed ship date. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The supplier must hold a CMMC Level 2 self-assessment, and documentation for source approval is required. The item is not required to include Unique Item Identification per DFARS 252.211-7003(c)(1)(i). All technical and quality requirements referenced are governed by the DLA Master List, with revisions tied to the solicitation issue or award date. Delivery is directed to DLA Distribution San Diego, and transportation protocols must align with DLA procedural notes C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, SEAL
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BALL AND SEAT ASSEM
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
LEVER, FUEL CONTROL

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
PACKING, PREFORMED
Other Support Activities for Air Transportation

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, FIBE
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
CLIP, RETAINING
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details