Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STOOL, REVOLVING

Active
SPE2DH-26-T-5137Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two revolving stools with four legs, no casters or back, and a 15-inch diameter seat that is adjustable between 19 and 31 inches, with the unit of issue being each. All units must be properly packaged in sealed containers capable of protecting against damage or breakage and placed in commercial exterior shipping containers suitable for safe delivery by common carriers at the lowest rate to the designated delivery point at Fort Bliss, Texas. Marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and copies of the standard are available through DLA Troop Support or their website. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must meet DLA requirements, and government identification must be removed from non-accepted supplies. Covered defense information may apply, and all supplies are subject to federal acquisition regulations. The solicitation number is SPE2DH-26-T-5137, posted on July 13, 2026, with a response deadline of July 20, 2026, and delivery is required within 20 days of award. The point of contact is Tina Vu, reachable via email and phone provided.

General Info

Two adjustable 15-inch diameter stools, no back or casters, delivered to Fort Bliss by July 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

337127 - Institutional Furniture ManufacturingView NAICS

Place of Performance

21287 LIGHT INFANTRY AVENUE, FORT BLISS, TX, 79918-2527, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5137.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STOOL,REVOLVING
STOOL, REVOLVING, WITH 4-LEGS, W/O CASTERS OR BACK, 15" DIA SEAT,
ADJUSTABLE 19" TO 31"
UNIT OF ISSUE IS EACH
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-518-5799 Quantity: 2 EA Purchase Request: 7017453635QTY: 2 Delivery: 20 days ADO

Similar Contracts

NAICS: 337127
New
Canada
Pedestals and Storage Lockers Supply and AssemblyStatistics Canada is soliciting bids for the supply and assembly of 60 pedestals and 45 two-door storage lockers, to be delivered and integrated into an existing workstation layout across Canada. The contract is classified as a subcontract under NAICS code 337127, which pertains to office furniture manufacturing, and the solicitation was posted on July 13, 2026, with a response deadline of July 29, 2026. All items must be delivered, assembled, and properly configured to align with the designated workspace design, ensuring seamless functionality and compliance with operational requirements. The place of performance is within Canada, and while no specific office address or point of contact is provided, the tender is issued under the Government of Canada's procurement framework and can be accessed via the Canada Buys portal.
Statistics Canada (StatCan)

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details
NAICS: 337127
New
Canada
Workspaces - Office FurnitureThis procurement under solicitation number J095124A is issued by Statistics Canada pursuant to the PWGSC Supply Arrangement E60PQ-140003/D and seeks the purchase, delivery, and installation of office furniture categorized under Workstation Systems, Work Surface Products, and Filing and Storage Products. The requirement includes 10 clusters of custom interconnecting panel systems equating to 60 workstations, 60 height-adjustable and fixed-height tables, 60 pedestals, and 45 dual-door storage lockers, all to be delivered and installed at 170 Tunney’s Pasture Drive, Ottawa, Ontario. Delivery must be completed by October 31, 2026, under Delivered Duty Paid (DDP) Incoterms 2020 terms, with installation timing to be determined. The procurement is open to holders of the general supply arrangement but includes a set-aside under the Procurement Strategy for Indigenous Business if two or more Indigenous businesses submit bids, in which case only those qualified Indigenous suppliers will be evaluated. Bidders must submit digital samples for each product category, comply with mandatory technical requirements identified by terms such as “must” or “shall,” and adhere to environmental packaging standards requiring reusable, returnable, or recyclable materials, excluding packaging tape and specialized packaging for hazardous or temperature-sensitive goods. All proposals must include completed annexes covering the statement of work, technical specifications, floor plans, product summaries, Indigenous certification, bid submission, and declaration forms, and must be submitted via CPC Connect by the deadline of July 29, 2026, at 14:00 PM EST. Contracts will be awarded on a per-category basis based on the lowest evaluated price among compliant offers, with the possibility of a single contract covering multiple won categories. Bidders must hold a valid Procurement Business Number, provide a price certification per Supply Arrangement Part 6B, and certify that they are Indigenous-owned as defined in Annex 9.4 of the Supply Manual if seeking the set-aside. The contract incorporates clauses on warranties, anti-forced labour compliance aligned with Canadian criminal and immigration law, insurance responsibilities borne solely by the contractor, site safety protocols, and adherence to the Code of Conduct for Procurement and Ineligibility and Suspension Policy. Invoices must be submitted to financecounter@statcan.gc.ca and include detailed financial breakdowns, applicable tax exemptions, delivery information, and contract references
Statistics Canada (StatCan)

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details
NAICS: 337127
New
Canada
Supply Arrangement (SA) # E60PQ-120001/H Chairs for fit-up projectThe contract is a solicitation under Supply Arrangement E60PQ-120001/H issued by the Department of Public Works and Government Services, Government of Canada, to procure, deliver, and install rotary chairs and stools for an ongoing multi-phase fit-up project supporting Courts Administration Services. The work is to be performed exclusively within Canada’s National Capital Region, with deliveries required across three distinct phases: 33 units in Phase 2, 30 units in Phase 3, and 12 units in Phase 4. All chairs must meet the technical specifications outlined in Annex A, including compliance with the ANSI/BIFMA e3 minimum Level® 2 environmental standard and recyclability of all plastic components. Chairs must be available in either standard (up to 275 lbs) or large-occupant (275–400 lbs) weight capacities and designed for either single-shift or 24/7 continuous use. Seat materials may include upholstery, non-upholstery (such as flexible plastic), or mesh, while base frames must be constructed of metal or plastic. Each chair must be supplied with proper labelling and user instructions. The solicitation requests optional pre-award submissions such as product photographs, color tone samples, and finish options, along with detailed ergonomic and accessibility information where applicable. The solicitation was posted on July 13, 2026, and responses are due by July 23, 2026. No contract value, unit pricing, payment terms, or formal inspection procedures are specified in the available documentation. The primary point of contact for this solicitation is Lily Nakhle, Contracting Authority, reachable via email at Lily.Nakhle@tpsgc-pwgsc.gc.ca.
Department of Public Works and Government Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 337127
New
Canada
Supply of Heavy-Duty Office Chairs for Large OccupantsThe contract calls for the supply of heavy-duty ergonomic office chairs designed to support users weighing up to 400 pounds, with construction standards meeting ANSI/BIFMA e3 Level 2 requirements for durability and safety. The chairs must incorporate enhanced structural integrity to ensure long-term performance under demanding conditions and be manufactured using recyclable materials to align with sustainable procurement goals. The equipment is intended for use within government facilities located in Canada’s National Capital Region, supporting workforce accessibility and workplace ergonomics for a diverse population of employees. The opportunity is issued as a subcontract under the Department of Public Works and Government Services, part of the Government of Canada’s procurement framework, and is categorized under NAICS code 337127 for office furniture manufacturing. Interested parties must submit responses by the deadline of July 23, 2026, at 7:00 PM Eastern Time. The tender is open to qualified suppliers capable of meeting technical specifications, delivery timelines, and environmental standards, with no specific set-aside provisions designated. Full details and submission instructions are accessible through the Canada Buys portal.
Department of Public Works and Government Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 337127
New
Canada
Custom Layout Interconnecting Panel Systems Supply and AssemblyStatistics Canada is seeking a subcontractor to supply, deliver, and perform on-site assembly of ten clusters of custom interconnecting panel systems, which may include integrated work surfaces and cable management solutions. The work requires precise coordination to ensure seamless installation and functional integration of all components at locations across Canada. The solicitation is open for responses until July 29, 2026, with a posted date of July 13, 2026, and falls under NAICS code 337127, indicating a focus on office furniture manufacturing. This contract is part of the Government of Canada’s procurement process and does not specify a set-aside designation. All performance is expected to occur within Canada, and participation is restricted to subcontractors responding through the CanadaBuys platform.
Statistics Canada (StatCan)

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details