Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of The Interior was posted on June 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Stoplog Handling and Gate Testing Support

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237310
New
SLED
ACADEMY OF RICHMOND COUNTY PARKING LOT PAVEMENT REPAIR and STRIPING
Solicitation # 26-214
The Richmond County Board of Education has issued RFP 26-214 for turnkey pavement repair and striping services at the Academy of Richmond County, located at 910 Russel St., Augusta, Georgia. The scope of work includes patching designated areas to match existing pavement, installing curb and gutter to enclose grease trap access manholes, and performing line striping. Specific technical requirements include the use of 3,000 FSI concrete with a fine broom finish, 98% compacted subgrade, and MPI #32 alkyd traffic-marking paint. All new striping and hatching must be yellow, while stop bars and existing crosswalks must be recoated in white, adhering to Georgia DOT Construction Standards. Asphalt top courses must cure for at least 14 days before painting. The contract will be awarded to the lowest responsible and responsive bidder, with an anticipated award date of October 20, 2026. Sealed bids are due by 3:00 PM on October 7, 2026, and must include turnkey pricing, a project lead time, company references, and a signed Sex Offender Acknowledgement Form. Contractors must maintain commercial general liability insurance of 2 million dollars and worker's compensation insurance of 1 million dollars. Compliance with Georgia state laws is mandatory, including E-Verify affidavits, periodic criminal history record inquiries under O.C.G.A. 35-3-34, and adherence to a smoke-free environment on school property. All work coordination and deliveries must be cleared through David Perry.
Richmond County Board of Education

POSTED

about 13 hours ago

DEADLINE

in 26 days
NAICS: 237310
New
Pier B On-Dock Rail Support Facility West Expansion and Pier B Street Realignment
Solicitation # HD-S3135
Kiewit Infrastructure West Co. is soliciting quotes from qualified SBE, VSBE, and DBE firms for the Pier B On-Dock Rail Support Facility West Expansion and Pier B Street Realignment project in Long Beach, California. The scope of work is extensive, covering heavy civil and infrastructure activities including site preparation, asbestos abatement, tunneling, underground piping, asphalt and concrete paving, electrical systems, and telecommunications. Interested firms must provide evidence of certification through the Department of General Services and the Port of Long Beach PlanetBids portal. Bidders are required to hold a valid California Contractor's license, provide acceptable insurance, and may be required to provide bonding for 100 percent of their contract value, with bond premiums reimbursed by Kiewit. The project is subject to a Project Labor Agreement, prevailing wage rates, and the California Labor Code. Firms performing onsite work must be signatory to collective bargaining agreements with specific trades, including carpenters, laborers, cement masons, ironworkers, operating engineers, and teamsters. Funding is provided through multiple grants, including the FHWA, LACMTA, the State of California Transportation Agency, and the U.S. DOT MARAD 2021 Port Infrastructure Development Program, necessitating compliance with DBE Program requirements. Interested parties must contact Lead Estimator Cassandra Shore to receive an Invitation to Bid via the BuildingConnected system, with a response deadline of September 15, 2026.
Kiewit Infrastructure West Co.

POSTED

about 14 hours ago

DEADLINE

in 4 days

AI Contract Overview

Show more

This subcontract involves the installation, repositioning, and removal of government-furnished stoplogs in three spillway gate bays to facilitate continuous 24-hour operational testing of the radial gates. The work supports the Department of the Interior's Great Plains Regional Office and is to be performed in Chester (zip code 59522). The contract is specifically designated as a Total Small Business Set-Aside under FAR 19.5, with NAICS code 237310, indicating construction-related activities. The solicitation was posted on June 5, 2026, with a response deadline set for June 20, 2026, at 9:00 PM. This project is critical for maintaining and testing the functionality and safety of the spillway gates, ensuring operational readiness through proper handling of the stoplogs. The subcontract provides an opportunity for small businesses to contribute to this vital infrastructure maintenance and testing task under the Department of the Interior’s established contracting procedures.

General Info

Install, reposition, and remove stoplogs for spillway gates in Chester under small business set-aside.

Agency

Department Of The Interior → Great Plains Regional OfficeView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Chester, MT, 59522, USA

Set-Aside

SBA

Documents

This scope was carved out of 140R6026R0014.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Z--Spillway Gantry Crane Removal, Tiber Dam, Montana

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Great Plains Regional Office
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of The Interior → Great Plains Regional Office
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation, repositioning, and removal of government-furnished stoplogs in three spillway gate bays to support 24-hour operational testing of radial gates.

More opportunities from Department Of The Interior → Great Plains Regional Office

Same awarding agency

NAICS: 335311
Federal
61--UNITROL 6800-Exciter HMI & Firmware Upgrade
Solicitation # 140R6026Q0114
Solicitation 140R6026Q0114 is a request for quotes issued by the Bureau of Reclamation, Missouri Basin Regional Office, for the upgrade of six UNITROL 6800 Exciter Human Machine Interface (HMI) units and associated firmware. The project focuses on replacing obsolete terminals and migrating operating systems from Windows XP/7 to Windows 10 to improve reliability and ensure compliance with cybersecurity and regulatory standards, including NERC-CIP, NIST 800-53, ISA-99, and IEC 62443. The scope includes the procurement of ABB brand-name hardware, such as the ECT Panel Model TPC-1551Tb and specific software licenses, along with certified engineering services for installation, power-up support, and the recommissioning of the exciter to resolve a critical Power System Stabilizer firmware bug. This procurement is a total small business set-aside, requiring offerors to be actively registered in SAM.gov and to provide exact ABB brand-name products to be considered technically acceptable. The period of performance is scheduled from September 1, 2026, to March 1, 2027, with delivery set for March 1, 2027, at the Grand Coulee Dam facility in Washington. Award will be based on a comparative evaluation of technical and price factors to determine the most advantageous offer to the government. Contractors must adhere to strict safety protocols, including Grand Coulee Lockout/Tagout procedures, and utilize the Invoice Processing Platform (IPP) for electronic payments. Following several amendments, the final quote submission deadline was extended to September 14, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

16 days ago

DEADLINE

in 2 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS