Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRAP, RETAINING

Active
SPE7L1-26-T-983AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of two retaining straps under part number 5340-01-477-4056. The contract requires delivery within five days after receipt of the order, with performance located in Conneaut Lake, Pennsylvania. The agreement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the supplier must adhere to MIL-STD-130N for the identification marking of U.S. military property and comply with regulations regarding the removal of government identification from non-accepted supplies.

General Info

DoD procurement of two retaining straps for delivery to Conneaut Lake, Pennsylvania.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

213113 - Support Activities for Coal MiningView NAICS

Place of Performance

6467 MIKE WOOD BLVD, CONNEAUT LAKE, PA, 16316-6661, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-983A.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRAP,RETAINING
STRAP, RETAINING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
ADEQUATE DATA FOR NSN/Part Number: 5340-01-477-4056 Quantity: 2 EA Purchase Request: 7017919287QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 213113
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L3-26-T-206T
This contract is for the procurement of one mounting bracket, identified by NSN 5340-01-523-1678, under solicitation number SPE7L3-26-T-206T. The item must be delivered within five days of order to Joint Base Lewis McChord, Washington. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging, the removal of government identification from non-accepted supplies, and the prohibition of Class I ozone-depleting chemicals. The contractor must adhere to specific technical data packages and Army drawings, utilizing DCSC drawing 16236 CS-2300-0001 for chemical agent resistant coatings where applicable. Quality assurance involves inspection and acceptance at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Additionally, the contract specifies specialty metal requirements per DFARS regulations and requires marking and labeling in accordance with MIL-STD-129.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 213113
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-18FR
Solicitation SPE4A6-26-T-18FR is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 48 sleeve bearings. The required items are identified by NSN 3120013681691 and RIX Industries part number A181-B7609. This is a small business set-aside under NAICS code 213113. The items are designated as critical application items and must be delivered within 171 days after the order is placed, with shipping terms set as FOB Origin. The contract mandates strict adherence to quality and technical standards, including SAE AS9003 or ISO 9001 for manufacturer inspection systems. Key requirements include physical identification and bare item marking per RQ017, and a prohibition on the intentional addition of mercury or mercury-containing compounds per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Joaquin in Tracy, California. All quotes must be submitted via the DIBBS portal, and payment will be processed electronically through the Wide Area WorkFlow system.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 213113
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-951H
This solicitation issued by the Department of Defense Land Supply Chain is for the procurement of 42 retaining straps under NSN 5340-01-187-8830. The contract is identified as a commercial item procurement with a delivery requirement of 218 days after the order is placed. Performance is located in New Cumberland, Pennsylvania, and the request is managed under solicitation number SPE7L1-26-T-951H. The supplier must adhere to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. While the provided technical data may be incomplete, the delivered items must meet all cited technical data and part number requirements. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and specifies that certain data may be proprietary.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 213113
New
DIBBS
SHAFT ASSEMBLY, FLEXIBL
Solicitation # SPE4A6-26-T-17LK
Solicitation SPE4A6-26-T-17LK is a request for quotations issued by the Department of Defense, ASC Commodities Division, for the procurement of 161 flexible shaft assemblies under NSN 6680007320561. The requirement is designated as a critical application item and must comply with MIL-DTL-10215P Revision P. Offerors must provide components from sources listed on the applicable Qualified Products List (QPL) or Qualified Manufacturers List (QML). The contract specifies a delivery timeframe of 171 days with terms set as FOB Origin, shipping to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement includes strict quality and packaging mandates, requiring adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Additionally, the solicitation explicitly excludes any items produced using additive manufacturing. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and electronic invoicing must be processed through the Wide Area Workflow (WAWF) system.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 213113
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-22AE
This contract is for the procurement of 658 units of straight, headless pins, identified by NSN 5315-01-163-0703 and part number MS9390-800. The items are classified as critical application items and must adhere to SAE AS9390 Revision D and the DLA Master List of Technical and Quality Requirements. Delivery is required within 163 days, with a need ship date of February 12, 2027, and a final required delivery date of August 17, 2027. The contract specifies that inspection and acceptance will occur at the destination, while delivery is FOB Origin. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. Quality assurance and sampling must be conducted according to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. All shipments are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A7-26-T-687Q
This contract is for the procurement of 17 straight Headle pins, identified by NSN 5315-01-472-9592 and part number MS20253-3-0512L. The items must adhere to the SAE AS20253 Revision B standard and are designated as critical application items. Delivery is required within 20 days after the order, with a required delivery date of August 27, 2026. The shipment is FOB Origin, with both inspection and acceptance occurring at the origin. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract specifies that covered defense information may apply and mandates strict adherence to DLA packaging and palletization requirements for procurement.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-20XS
This solicitation from the Defense Logistics Agency involves the procurement of 28 thrust washer bearings under NSN 3120-01-517-4902. The contract is issued by the ASC Commodities Division of the Department of Defense, with a delivery requirement of 168 days after the delivery order date. Key compliance mandates include Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements and strict adherence to physical identification and bare item marking protocols. While Item Unique Identification is waived per the service customer's request, the procurement is subject to specific DLA packaging and tailored higher-level quality requirements, including inspection and acceptance at the origin. The contract carries significant regulatory weight regarding data security and international trade. Covered defense information is applicable, and the technical data associated with this item is subject to export controls under either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). Consequently, contractors must possess approved US/Canada Joint Certification Program certification and complete required training to access and handle export-controlled technical data. All technical and quality requirements are governed by the DLA Master List, with specific provisions for the handling of non-accepted supplies and the removal of government identification.
ASC COMMODITIES DIVISION

POSTED

7 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 213113
DIBBS
CLAMP, BLOCK
Solicitation # SPE7L1-26-T-990N
This solicitation, identified by number SPE7L1-26-T-990N, is issued by the Department of Defense Land Supply Chain for the procurement of one block clamp, part number 5340-01-369-7227. The contract requires adherence to specific DLA packaging requirements and incorporates technical and quality standards as defined in the DLA Master List. A critical environmental and safety mandate prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or supplies provided under this contract, with specific exceptions for functional mercury used in batteries, sensors, or weapon systems as specified by NAVSEA. Any portable instruments containing mercury must be shockproof and feature a secondary containment boundary. The procurement is categorized under NAICS code 213113, with a delivery requirement of 20 days after delivery order. Interested parties must submit responses by the deadline of August 31, 2026. The place of performance is designated as FPO, and the primary point of contact for inquiries regarding this solicitation is Michael Nordahl. All technical revisions applicable to the acquisition will be governed by the version of the master list in effect on the solicitation or award date, depending on whether the acquisition is classified as simplified or large.
LAND SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
DIBBS
CHAIN AND PIN ASSEMBLY
Solicitation # SPE4A6-26-T-21AH
This contract, identified by solicitation number SPE4A6-26-T-21AH, is for the procurement of a single Chain and Pin Assembly, part number 50375-157, under NSN 5315-01-625-2996. The acquisition is managed by the ASC Commodities Division of the Department of Defense and requires delivery to Joint Base Lewis McChord, WA. The required delivery timeframe is 20 days, with the shipment designated as FOB Origin and inspection and acceptance occurring at the destination. The agreement incorporates strict technical and quality requirements, including adherence to DLA packaging standards and specific marking protocols under MIL-STD-129. Quality assurance is governed by specific sampling methods such as MIL-STD-1916 or ASQ H1331, with defined verification levels for critical, major, and minor attributes. Packaging must comply with MIL-STD-2073-1E, and the shipment must be sent via the fastest traceable means, explicitly excluding the use of Parcel Post.
ASC COMMODITIES DIVISION

POSTED

7 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 213113
SLED
Soil Vapor Well InstallationThe City of Pittsburg seeks a subcontractor to install soil vapor wells to assess potential vapor intrusion risks and collect soil vapor samples for laboratory analysis. This effort is focused on evaluating subsurface vapor migration that could impact indoor air quality, typically in areas with historical industrial activity or contamination concerns. The work involves precise drilling and installation of monitoring wells designed to capture representative vapor samples from various depths, following industry-standard protocols to ensure data reliability and regulatory compliance. The contract is open to qualified vendors with experience in environmental site assessment and vapor intrusion investigations, and responses must be submitted by September 11, 2026. Performance of the work is required within the city limits of Pittsburg, California, with the zip code 94565, under the NAICS code 213113 for support activities for mining.
City of Pittsburg

POSTED

22 days ago

DEADLINE

in 16 days
View Details
NAICS: 213113
SLED
Deeper-Zone Groundwater Monitoring Well InstallationThe contract involves drilling and installing deeper monitoring wells in Pittsburg, California, specifically to evaluate the vertical extent of groundwater contamination, with a focus on perchloroethylene (PCE). The work is critical for understanding how deeply and widely the contaminant has migrated below the surface, informing remediation strategies and long-term environmental management. This subcontract is part of an ongoing remediation effort by the City of Pittsburg and requires specialized drilling expertise to reach deeper aquifers without compromising the integrity of existing monitoring systems. The opportunity is open for response until September 11, 2026, with a posted date of August 4, 2026, and is classified under the NAICS code 213113 for drillers of oil and gas wells, indicating the technical nature of the drilling operations required. Performance of the work is strictly limited to the Pittsburg area with a zip code of 94565, and the project demands adherence to environmental standards and precise well construction protocols to ensure accurate data collection. There is no set-aside designation, and the contract does not specify a point of contact, requiring potential bidders to use the provided online link for further details and submission procedures.
City of Pittsburg

POSTED

22 days ago

DEADLINE

in 16 days
View Details
NAICS: 213113
SLED
Shallow-Zone Groundwater Monitoring Well InstallationThe City of Pittsburg is soliciting a subcontract to install monitoring wells in shallow aquifers to support groundwater sampling for petroleum-hydrocarbon contamination analysis. The project requires the deployment of properly constructed wells to access and collect representative samples from near-surface groundwater zones, ensuring accurate detection and assessment of hydrocarbon pollutants. Work must be performed within the city limits of Pittsburg, California, with a zip code of 94565, and must adhere to industry standards for well construction, sampling protocols, and environmental compliance. The solicitation was posted on August 4, 2026, and requires responses to be submitted no later than September 11, 2026, at 9:00 PM. This procurement is classified under NAICS code 213113, which pertains to support activities for mining, indicating a focus on field-based environmental monitoring services. All contractors must be prepared to meet technical and regulatory requirements for groundwater sampling and well installation in this specific geographic area.
City of Pittsburg

POSTED

22 days ago

DEADLINE

in 16 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332994
New
DIBBS
SIGHT, FRONT
Solicitation # SPE7L1-26-T-966D
Solicitation SPE7L1-26-T-966D is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 275 front sights, identified as a critical application item. The required hardware is manufactured by Heckler & Koch Defense Inc. under part number 51000246 and NSN 1005-01-689-7880. This procurement is designated as a total small business set-aside under NAICS code 332994. Delivery is specified as FOB Origin with a delivery period of 452 days, and the items are to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Quality assurance is managed through destination inspection and acceptance. Additionally, the contractor must maintain supply chain traceability documentation and comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to NIST SP 800-171 and DFARS 252.204-7012 for cybersecurity and the safeguarding of covered defense information.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
CONNECTOR, ROD END
Solicitation # SPE7L1-26-T-03D4
This contract is for the procurement of one rod end connector, identified by NSN 5340016176960 and part number 075SA0097 from Rosenboom Machine and Tool, Inc. The item is designated as a critical application item and must be delivered within 20 days. Delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically the Aberdeen Test Center in Maryland. The supplier must adhere to DLA packaging requirements and MIL-STD-130N for identification marking. All items must be free of Class I ozone depleting chemicals. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all labeling following MIL-STD-129. The contract is managed by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-03D4.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-U-0557
Solicitation SPE7L1-26-U-0557 is a total small business set-aside for the procurement of power supplies, specifically part number TH-4322 from Arnold Magnetics Corporation. The requirement is for an estimated quantity of 10 units, with a delivery window of 127 days after the award date. This is an Indefinite Delivery Contract with a guaranteed minimum of one unit and a maximum contract value of 350,000 dollars. The items are designated as critical application items and must be delivered FOB Origin within the continental United States. The contract mandates strict adherence to several technical and quality standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and MIL-STD-1916 or ASQ H1331 for sampling. Key compliance requirements include full supply chain traceability per DLAD C03, mercury-free certification according to NAVSEA 5100-003D, and a CMMC Level 2 self-assessment for cybersecurity. Inspection and acceptance will occur at the destination. All invoicing and payment requests must be processed exclusively through the Wide Area WorkFlow system.
Motor and Generator Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334290
New
DIBBS
ANTENNA ASSEMBLY
Solicitation # SPE7L1-26-R-0113
This pre-solicitation is for the procurement of 117 antenna assemblies, identified by NSN 5985-01-423-4661, for the DLA Land and Maritime agency. The solicitation is expected to be issued around August 26, 2026, and close by September 25, 2026. The contract includes a 100 percent option that may be exercised at the time of award, with a required delivery timeline of 600 days to the DLA Distribution facility in New Cumberland, Pennsylvania. BAE Systems Information and Electronic is listed as an approved source with part number 10030004G3. The procurement is categorized as other than full and open competition and will be conducted under FAR part 15, as the item is deemed non-commercial and manufactured for military use only. Award decisions will be based on a combination of price, delivery, and performance. Interested parties must submit offers in English and US dollars via the DIBBS system or email to Contract Specialist Zachary Rodriguez.
Other Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 30 days
View Details
NAICS: 333613
New
DIBBS
LEVER, REMOTE CONTRO
Solicitation # SPE7L1-26-T-954N
This contract is for the procurement of 19 remote control levers, identified by NSN 3040-01-679-0878 and part number AL4000206. The items are to be delivered to Fort Benning, Georgia, with a delivery timeframe of 20 days. The agreement specifies that the shipping method must be the fastest traceable means and explicitly prohibits the use of parcel post. The contract mandates strict adherence to environmental and quality standards, specifically prohibiting the use of Class I ozone-depleting chemicals. All packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Inspection and acceptance will take place at the destination, and the terms are set as FOB Origin.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333618
New
DIBBS
BODY, VALVE SAFETY
Solicitation # SPE7L1-26-T-961U
Solicitation SPE7L1-26-T-961U is a total small business set-aside issued by the Department of Defense Land Supply Chain for the procurement of 19 safety valve bodies. These components are designed for use in Colt Industries S.E.M.T Pielstick 16 cylinder diesel engine model PC2.5V, specifically for landing craft models LSD41 through LSD44. The items are identified by NSN 2815-01-180-0652 and part number 03770014N from Fairbanks Morse, LLC. Delivery is required by February 9, 2027, with a delivery window of 168 days after award. The shipment is designated as FOB Origin and will be delivered to DLA Distribution San Diego, California. The contract mandates strict adherence to several military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for shipment marking, and MIL-STD-130 for identification and configuration control. Specific environmental and safety restrictions are in place, prohibiting the intentional addition of mercury or mercury-containing compounds unless they are functional components specified by NAVSEA. Hazardous materials must be labeled per 29 CFR 1910.1200, and any radioactive materials require prior written notice to the contracting officer. Inspection and acceptance will occur at the destination. All invoicing must be processed electronically through the Wide Area WorkFlow system.
Other Engine Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333613
New
DIBBS
WORM SHAFT
Solicitation # SPE7L1-26-T-956X
Solicitation SPE7L1-26-T-956X is a procurement request from the Department of Defense, DLA Land and Maritime, for eight worm shafts (NSN 3040200067889). The contract is valued at 64.00 dollars, with a delivery schedule of 116 days after receipt of order. Delivery is designated as FOB Origin, with the final destination, inspection, and acceptance point located at DLA Distribution San Diego, California. The need ship date is January 28, 2025, with an original required delivery date of February 26, 2025. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Special requirements include a prohibition on Class I ozone-depleting chemicals and compliance with NIST SP 800-171 for cybersecurity. Hazardous materials must be identified and labeled according to 29 CFR 1910.1200, with required Safety Data Sheets submitted prior to award. Invoicing must be processed electronically through the Wide Area WorkFlow system. Proposals are due by August 24, 2026, via the DLA Internet Bid Board System.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-03B0
This solicitation is for the procurement of 278 mounting brackets under NSN 5342-01-676-6999 for the Department of Defense Land Supply Chain. The contract requires delivery within 146 days after the order is placed. Performance is designated for New Cumberland, Pennsylvania, and the procurement falls under NAICS code 332510. The contract is subject to strict technical and quality requirements, including DLA packaging standards and configuration change management. Notably, this item involves restricted technical data from Oshkosh Defense, LLC, requiring a signed license agreement and adherence to data non-disclosure and destruction protocols. Furthermore, the technical data is subject to ITAR and EAR export controls, meaning vendors must have approved US/Canada Joint Certification Program certification and completed specific DOD export-control training to access the necessary documentation.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-957J
This solicitation from the Department of Defense Land Supply Chain is for the procurement of 42 units of access covers, identified by NSN 5340-01-273-4626. The contract requires delivery within 229 days after the order is placed and mandates adherence to DLA packaging requirements and specific quality standards. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. The agreement includes strict compliance with cybersecurity and export control regulations, specifically requiring CMMC Level 2 certification and adherence to ITAR and EAR regulations for the handling of technical data. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and any substitute chemicals must be submitted for official approval.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336390
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L1-26-T-02X0
This contract is for the procurement of one filler opening cap, identified by NSN 2590-01-566-3609 and Blue Bird Body Co part number 0021432. The order is issued by the Department of Defense Land Supply Chain with a required delivery date of August 24, 2026, and a delivery timeframe of 10 days after receipt of order. The item is to be delivered FOB Origin to the US Army AWCF SSF at Fort Campbell, Kentucky. Compliance with DLA packaging requirements is mandatory, specifically adhering to ASTM D3951 and MIL-STD-129 for marking and labeling. Technical and quality requirements are governed by the DLA Master List, and any government identification must be removed from non-accepted supplies. Shipment must be made via the fastest traceable means, excluding parcel post.
Other Motor Vehicle Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L1-26-T-03D8
This solicitation from the Department of Defense Land Supply Chain is for the procurement of two preformed packing units under NSN 5330-01-701-7426. The contract requires delivery within 20 days after receipt of order. All supplied items must be completely free of asbestos, and any alternative materials must be approved according to specific contractual clauses. The items must adhere to strict packaging and marking standards, including MIL-STD-130N for identification and MIL-DTL-117 for waterproof, greaseproof, and opaque bagging to prevent deterioration from ultraviolet rays. The agreement incorporates several technical and quality requirements, including DLA packaging standards and regulations regarding the removal of government identification from non-accepted supplies.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L1-26-T-931U
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 18 plain seals under National Stock Number 5330-15-111-0432. The contract is classified as a commercial item acquisition with a delivery requirement of 168 days after order. The primary point of contact for this request is Katherine Woods, and the place of performance is located in Albany. The supplier must adhere to strict technical and quality requirements, including MIL-STD-130N for identification marking and MIL-DTL-117 for packaging. Specifically, the items must be sealed in medium duty, waterproof, greaseproof, and opaque bags to prevent deterioration from ultraviolet rays. Additionally, all supplied items must be completely free of asbestos, and any alternative materials must receive prior approval.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details