Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING, SLEEVE

Active
SPE4A6-26-T-14ZAFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 10 sleeve bearings, identified by NSN 3120-01-503-2871. The requirement specifies parts associated with Johnson Controls Navy Systems, LLC. Delivery is required within 171 days, with an original required delivery date of December 15, 2026, and a final need ship date of February 7, 2027. The items are to be delivered FOB Origin and will undergo inspection and acceptance at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with the item designated as a critical application item. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Technical and quality requirements are further detailed in the DLA Master List.

General Info

DoD procurement of 10 sleeve bearings for Johnson Controls, delivery by February 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

213113 - Support Activities for Coal MiningView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14ZA for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
NIYANA YARBER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,SLEEVE
BEARING, SLEEVE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
YORK INTERNATIONAL CORP
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
IDENTIFY TO:
"DLA does not have a bidset available"
SAMPLING:
CRITICAL APPLICATION ITEM
JOHNSON CONTROLS NAVY SYSTEMS, LLC 66935 P/N 064-50006-000 JOHNSON CONTROLS NAVY SYSTEMS, LLC 66935 P/N 364-49792-000 ITEM 62
SPE4A6-26-T-14ZA
SECTION B
PR: 7017837768 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017837768 0001 EA 10.000
NSN/MATERIAL:3120015032871
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:09
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/07/2027
SPE4A6-26-T-14ZA
SECTION B
PR: 7017837768 PRLI: 0001 CONT’D
Original Required Delivery Date:12/15/2026
SPE4A6-26-T-14ZA NSN/Part Number: 3120-01-503-2871 Quantity: 10 EA Purchase Request: 7017837768QTY: 10 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 213113
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-951H
This solicitation issued by the Department of Defense Land Supply Chain is for the procurement of 42 retaining straps under NSN 5340-01-187-8830. The contract is identified as a commercial item procurement with a delivery requirement of 218 days after the order is placed. Performance is located in New Cumberland, Pennsylvania, and the request is managed under solicitation number SPE7L1-26-T-951H. The supplier must adhere to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. While the provided technical data may be incomplete, the delivered items must meet all cited technical data and part number requirements. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and specifies that certain data may be proprietary.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 213113
New
DIBBS
SHAFT, SPECIAL
Solicitation # SPE7LX-26-U-9495
Solicitation SPE7LX-26-U-9495 is a Unilateral Simplified Indefinite-Delivery Contract issued by the Department of Defense Strategic Acq Program Directorate for the procurement of special shafts, identified by NSN 3040218787289. The contract is for a critical application item associated with General Dynamics Land Systems Canada and European Land Systems. It specifies an estimated annual quantity of 88 units, with a contract maximum value of 350,000.00 USD. Delivery is required within 173 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Key regulatory requirements include compliance with NIST SP 800-171 for safeguarding covered defense information, reporting cyber incidents within 72 hours, and providing Safety Data Sheets for any hazardous materials prior to award. Proposals must be submitted via the DLA Internet Bid Board System (DIBBS) by August 25, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 213113
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-14KR
The contract solicitation SPE4A6-26-T-14KR is issued by the ASC Commodities Division of the Department of Defense for the procurement of 150 units of a straight pin with NSN 5315013335733 and one required Production Lot Test (PLT) item with NSN 0001S00000062. Delivery is mandated within 170 days after contract award with FOB Origin terms, and inspection and acceptance occur at the contractor’s facility. The PLT must be conducted in accordance with DI-NDTI-80809B, and the resulting test report must be presented to the Quality Assurance Representative (QAR) for review, accompanied by signed DD Form 1222 and DD Form 250/iRAPT receiving reports, the contract copy, all applicable test results with tolerances, material and process certifications, inspection method sheets, and marked drawings restricted from public disclosure. Packaging and labeling must fully comply with RP001 and MIL-STD-129, including proper barcoding, hazard communication per 29 CFR 1910.1200, and specific requirements for radioactive materials exceeding regulatory thresholds. Inspection and acceptance are governed by MIL-STD-1916, MIL-STD-105/ASQ Z1.4, and ISO 9001:2015, requiring zero non-conformances in critical and major attributes unless otherwise specified. The contract incorporates extensive cybersecurity directives including 252.204-7012 and 52.240-93 mandating safeguarding of covered defense information and reporting of cyber incidents, along with ethical and compliance clauses such as whistleblower rights, limitations on use of former DoD officials’ services, and restrictions on procurement of equipment from Communist Chinese military companies. Payment is exclusively processed through Wide Area WorkFlow (WAWF), with accelerated payments required for small business subcontractors. Offerors must be registered in SAM with a valid UEI and CAGE code, represent their small business status under NAICS 213113, and disclose any participation in joint ventures for socioeconomic programs. The solicitation does not specify pricing, contract type, or award method, but the absence of detailed technical evaluation criteria and reliance on compliance and socioeconomic preferences suggest an LPTA-based selection. All submissions must be via D
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
New
DIBBS
SHAFT ASSEMBLY, CONT
Solicitation # SPE7L3-26-T-150L
The contract pertains to the procurement of eight shaft assemblies with NSN 2520-00-017-2563, under solicitation SPE7L3-26-T-150L, with a delivery requirement of 20 days after order and a target completion date of July 14, 2026. Delivery is to be made directly to the Jordan Armed Forces in Amman, Jordan, with FOB Origin terms, meaning title and risk of loss transfer upon delivery at the contractor’s facility. The item involves technical data subject to export control under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048; access to such data is restricted to DLA contractors holding an approved US/Canada Joint Certification Program certification, having completed required training, and received DLA authorization. The contract mandates adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking and barcoding, and preservation method 33 for cleaning and drying. Inspection and acceptance occur at origin, governed by FAR 52.246-2, with zero non-conformances required for critical attributes under a sampling plan using AQL levels of 0.1 for critical, 1.0 for major, and 4.0 for minor. Quality systems must comply with SAE AS9003 or ISO 9001 tailored to AS9003. Contractors must comply with multiple DFARS clauses including 252.204-7012 for safeguarding defense information and cyber incident reporting, 252.240-7997 for NIST SP 800-171 compliance, 252.223-7001 for hazardous material labeling, 252.223-7008 prohibiting hexavalent chromium, 252.204-7018 for prohibition of covered telecommunications equipment, and 252.225-7007 for restrictions on sourcing from Chinese military companies. CMMC Level 2 certification is required for third-party assessors, and all offerors must hold a UEI and CAGE code, represent their size status and socioeconomic categories if claiming small business status, and comply with trafficking in persons, employment verification, and whistleblower protection clauses. Invoicing must
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-919R
The contract solicitation SPE7L1-26-T-919R is a total small business set-aside issued by the Defense Logistics Agency under the LAND SUPPLY CHAIN organization for the procurement of 85 units of STRAP, RETAINING with NSN 5340-01-089-4199. The requirement is for firm-fixed-price delivery FOB Origin to the DLA Distribution Facility in New Cumberland, Pennsylvania, with a delivery deadline 154 days after order, targeting a need ship date of January 19, 2027. All supplies must comply with the DLA Master List of Technical and Quality Requirements, packaged per MIL-STD-129 and ASTM D3951, and labeled according to MIL-STD-130N for permanent identification and 29 CFR 1910.1200 for hazardous materials. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless already authorized by specification. Technical data associated with this item is subject to export control under ITAR or EAR, and only contractors with approved JCP certification, completed training, and DLA authorization may access it. Compliance with DFARS 252.225-7048 and other export control provisions is mandatory, and disclosure to foreign persons—even within the U.S.—is restricted. Contractors must meet stringent cybersecurity requirements including CMMC Level 2 self-assessment and adherence to the Safeguarding Covered Defense Information and Cyber Incident Reporting clause (252.204-7012), as covered defense information applies to this contract. All offers must be submitted electronically via DIBBS by the deadline of August 17, 2026, with no paper submissions accepted. The solicitation mandates adherence to numerous FAR and DFARS clauses covering employment eligibility, trafficking in persons, sustainable products, hazardous materials, whistleblower rights, and electronic invoicing through WAWF. Payment processing requires submission of receiving reports and invoices via WAWF, and contractors must represent and certify their small business status throughout performance, including maintaining eligibility for the total small business set-aside. Inspection and acceptance occur at the destination facility with zero non-conformances expected unless otherwise specified. No pricing is provided in the solicitation, and the contract value remains unspecified. Performance is governed by compliance with military standards for packaging, labeling, hazardous material handling, and cybersecurity, with no
LAND SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L2-26-T-0591
The solicitation seeks four shouldered shafts identified by NSN 3040010537621 under Request for Quotation SPE7L2-26-T-0591, issued by the Defense Logistics Agency’s Land and Maritime division through the DIBBS platform. Delivery is scheduled for 614 days after award, with first article testing required for two units to be delivered within 90 calendar days of contract award to Dayton T. Brown in Bohemia, New York. These first article units will not be counted toward production quantities and must be maintained by the government as a manufacturing standard or destroyed during testing, governed by FAR 52.209-4 Alternate I, which mandates government testing and approval within 105 days of receipt. The item is subject to export control under ITAR or EAR, and only offerors with an approved US/Canada Joint Certification Program (JCP) certification, who have completed mandatory DLA export control training and been authorized by the DLA controlling authority, are eligible for award. Quality requirements mandate compliance with SAE AS9003 or ISO 9001 tailored to SAE AS9003 standards, and packaging must adhere to MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. The contract requires origin inspection under FAR 52.246-2 and invoicing through the WAWF system in accordance with DFARS 252.232-7003. Domestic procurement restrictions apply, including the Buy American Act and the Berry Amendment, with a reduced threshold of $150,000, and clauses DFARS 252.225-7006, 7012, and 7015 must be reviewed for applicability. Offerors must validate all representations in SAM, including small business status, covered telecommunications equipment compliance, and safeguarding of covered defense information. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, and quotations must be submitted via DIBBS by August 17, 2026.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

7 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12GV
Solicitation SPE4A6-26-T-12GV, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 79 units of Quick Release Pins (NSN 5315014943040). The items must be manufactured in accordance with the current revisions of NASM14531 and NAS1322 through 1326. This is a critical application item requiring strict adherence to quality standards, including zero non-conformances during inspection. Inspection and acceptance will occur at the origin, with a delivery schedule of 171 days after the date of order, targeting a need ship date of January 31, 2027. The final delivery destination is the DDSP New Cumberland Facility in Pennsylvania. The contract mandates comprehensive packaging and marking compliance, requiring adherence to ASTM D3951, MIL-STD-129, and DLA packaging requirements (RP001). Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with specific verification levels and AQLs assigned based on attribute criticality. Administratively, the contract requires electronic invoicing through the Wide Area WorkFlow system and strict cybersecurity compliance under NIST SP 800-171 and DFARS 252.204-7012. All quotes must be submitted electronically via the DIBBS portal by the deadline of August 12, 2026.
ASC COMMODITIES DIVISION

POSTED

8 days ago

DEADLINE

in about 6 hours
View Details
NAICS: 213113
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-11ZA
Solicitation SPE4A6-26-T-11ZA, issued by the Defense Logistics Agency's ASC Commodities Division, is for the procurement of 17 thrust washer bearings (NSN 3120-01-503-9131). The contract requires delivery within 171 days after the date of award, with a need ship date of January 31, 2027. Performance is designated as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will also occur at the point of origin. The procurement is subject to strict quality and regulatory standards, including compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Technical data is subject to export control under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contract mandates adherence to hazard communication standards under 29 CFR 1910.1200 and prohibits the use of mercury compounds in packaging. All invoicing and payment submissions must be processed through the Wide Area WorkFlow (WAWF) system. Proposals must be submitted electronically via the DIBBS portal by August 12, 2026.
ASC COMMODITIES DIVISION

POSTED

8 days ago

DEADLINE

in about 6 hours
View Details
NAICS: 213113
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-11YN
Solicitation SPE4A6-26-T-11YN, issued by the Department of Defense ASC Commodities Division, is for the procurement of five annular ball bearings (NSN 3110-01-385-4348). The items are identified as commercial products and are designated for critical application. Delivery is required within 171 days after the order date, with the final destination being Hill Air Force Base, Utah. The contract is governed by FOB Origin terms, and invoicing must be processed exclusively through the Wide Area WorkFlow (WAWF) system. A critical requirement of this procurement is the domestic sourcing restriction per DFARS 252.225-7016, which mandates that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50% of the component cost originating from these regions. Contractors must provide a formal declaration of the domestic or foreign nature of the materials. Quality assurance is stringent, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331, and strict adherence to MIL-DTL-197M for preservation and packaging, and MIL-STD-129 for marking and bar-coding. Final inspection and acceptance will occur at the destination.
ASC COMMODITIES DIVISION

POSTED

8 days ago

DEADLINE

in about 10 hours
View Details
NAICS: 213113
SLED
Soil Vapor Well InstallationThe City of Pittsburg seeks a subcontractor to install soil vapor wells to assess potential vapor intrusion risks and collect soil vapor samples for laboratory analysis. This effort is focused on evaluating subsurface vapor migration that could impact indoor air quality, typically in areas with historical industrial activity or contamination concerns. The work involves precise drilling and installation of monitoring wells designed to capture representative vapor samples from various depths, following industry-standard protocols to ensure data reliability and regulatory compliance. The contract is open to qualified vendors with experience in environmental site assessment and vapor intrusion investigations, and responses must be submitted by September 11, 2026. Performance of the work is required within the city limits of Pittsburg, California, with the zip code 94565, under the NAICS code 213113 for support activities for mining.
City of Pittsburg

POSTED

8 days ago

DEADLINE

in about 1 month
View Details
NAICS: 213113
SLED
Deeper-Zone Groundwater Monitoring Well InstallationThe contract involves drilling and installing deeper monitoring wells in Pittsburg, California, specifically to evaluate the vertical extent of groundwater contamination, with a focus on perchloroethylene (PCE). The work is critical for understanding how deeply and widely the contaminant has migrated below the surface, informing remediation strategies and long-term environmental management. This subcontract is part of an ongoing remediation effort by the City of Pittsburg and requires specialized drilling expertise to reach deeper aquifers without compromising the integrity of existing monitoring systems. The opportunity is open for response until September 11, 2026, with a posted date of August 4, 2026, and is classified under the NAICS code 213113 for drillers of oil and gas wells, indicating the technical nature of the drilling operations required. Performance of the work is strictly limited to the Pittsburg area with a zip code of 94565, and the project demands adherence to environmental standards and precise well construction protocols to ensure accurate data collection. There is no set-aside designation, and the contract does not specify a point of contact, requiring potential bidders to use the provided online link for further details and submission procedures.
City of Pittsburg

POSTED

8 days ago

DEADLINE

in about 1 month
View Details
NAICS: 213113
SLED
Shallow-Zone Groundwater Monitoring Well InstallationThe City of Pittsburg is soliciting a subcontract to install monitoring wells in shallow aquifers to support groundwater sampling for petroleum-hydrocarbon contamination analysis. The project requires the deployment of properly constructed wells to access and collect representative samples from near-surface groundwater zones, ensuring accurate detection and assessment of hydrocarbon pollutants. Work must be performed within the city limits of Pittsburg, California, with a zip code of 94565, and must adhere to industry standards for well construction, sampling protocols, and environmental compliance. The solicitation was posted on August 4, 2026, and requires responses to be submitted no later than September 11, 2026, at 9:00 PM. This procurement is classified under NAICS code 213113, which pertains to support activities for mining, indicating a focus on field-based environmental monitoring services. All contractors must be prepared to meet technical and regulatory requirements for groundwater sampling and well installation in this specific geographic area.
City of Pittsburg

POSTED

8 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic and Military Logistics / Freight Hauling
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Acceptance Sampling
Engineering Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling Services
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Labeling of Military Supplies
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332321
New
DIBBS
Precision Fastener Manufacturing – Close Tolerance Screws
Metal Window and Door Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supply of Socket Head Cap Screws (NSN: 5305-01-682-5465)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Domestic and Regulatory Compliance Management
Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Acceptance Support
Engineering Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811212
New
DIBBS
MIL-STD-129 Compliant Marking and Labeling
Computer and Office Machine Repair and Maintenance

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Defense-Compliant Packaging and Preservation Services
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
Cable Assembly Manufacturing and Testing
Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Supply of Lock Pin Fasteners (Studs)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details