Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRAP, RETAINING

Active
SPE7L1-26-T-919RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 85 retaining straps with NSN/Part Number 5340-01-089-4199 under solicitation SPE7L1-26-T-919R, issued as a total small business set-aside under FAR 19.5. Delivery is required within 154 days after award, and the place of performance is specified as New Cumberland, PA with ZIP code 17070-5002. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation or award date depending on acquisition type. The contract prohibits the use of Class I ozone-depleting chemicals entirely, overriding any conflicting specification requirements unless substitute chemicals are pre-approved. Export-controlled technical data applies under ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location, and demands compliance with DFARS 252.225-7048; access to such data is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal DLA authorization. The contractor must also self-assess against Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements. All supplies must have government identification removed if not accepted. The contract is publicly posted with a response deadline of August 17, 2026, and primary point of contact is Isabelle Szulewski at DLA.

General Info

Procure 85 retaining straps, NSN 5340-01-089-4199, deliver by 154 days to New Cumberland, PA, comply with ITAR, CMMC Level 2, and ozone-depleting chemical bans.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

213113 - Support Activities for Coal MiningView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7L1-26-T-919R for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
ISABELLE SZULEWSKI
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRAP,RETAINING
STRAP RETAINING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
FULL AND OPEN COMPETITION APPLY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the
SPE7L1-26-T-919R
SECTION B
export-controlled data. NSN/Part Number: 5340-01-089-4199 Quantity: 85 EA Purchase Request: 7017601780QTY: 85 Delivery: 154 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 213113
New
DIBBS
SHAFT ASSEMBLY, CONT
Solicitation # SPE7L3-26-T-150L
The contract pertains to the procurement of eight shaft assemblies identified by NSN 2520-00-017-2563 under solicitation SPE7L3-26-T-150L, with a required delivery within 20 days after award. The item involves technical data subject to export control under either ITAR or EAR, restricting any disclosure to foreign persons regardless of location, including foreign nationals within the United States and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and access to the technical data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. Additional requirements include adherence to CMMC Level 2 certification by the assessing third-party organization and compliance with phosphate coating supplier certification standards. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office, with Lee Miller designated as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 213113
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L2-26-T-0591
The item specified is a shaft with a shoulder, identified by NSN 0001S00000052, with a quantity of four units required under purchase request 7017385625. Delivery is scheduled 614 days after award, and the procurement is governed by the solicitation SPE7L2-26-T-0591, posted on August 5, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 213113 and is managed by the Department of Defense’s Land Supplier Operations Wheeled Vehicles, with performance to occur in Tracy, California. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any transfer or disclosure to foreign persons within or outside the United States without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only DLA contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and formal approval from DLA may access or handle this technical data. The contractor must also be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a accredited third-party assessment organization. All distribution and handling of technical data must comply with DLA’s packaging and data control requirements as outlined in the referenced procurement guidelines.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 213113
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12GV
This contract is for the procurement of 79 units of a quick release pin identified by NSN 5315-01-494-3040 and part number NASM14531-2C334211, manufactured in accordance with the non-government standard NASM14531 and referenced standards NAS1322 through NAS1326 Revision 04. All hardware must comply with the current revision of these standards, and previously manufactured items meeting earlier valid revisions are acceptable only if they were produced under then-current requirements. The item is classified as a critical application component, and inspection and acceptance occur at the manufacturer’s origin. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required in the sample unless otherwise specified. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization conforming to DLA’s packaging requirements, and all DLA Master List technical and quality requirements take precedence over ASTM standards. The contract specifies a delivery timeline of 171 days from award, with a required delivery date of December 13, 2026, and a need ship date of January 31, 2027. Delivery is FOB origin, with no variance allowed in quantity. The purchase price is $79.00 per unit for a total of $6,241.00. The contracting office is the ASC Commodities Division under the Department of Defense, with Samantha Hopkins as the primary point of contact. The order is solicited under SPE4A6-26-T-12GV with a response deadline of August 12, 2026, and shall be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-11ZA
The item under contract is a thrust washer bearing with NSN 3120-01-503-9131, quantity of 17 units, to be delivered within 171 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition type. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at the point of origin, and unaccepted supplies must have all government identification removed. Item Unique Identification is not required per the service customer’s request. Technical data associated with this item is subject to export controls under ITAR or EAR, and no export—including disclosure to foreign persons in the U.S.—is permitted without prior authorization from the Department of State or Commerce; DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandated training and questionnaires, and have received formal approval from DLA. The solicitation number is SPE4A6-26-T-11ZA, posted on August 4, 2026, with responses due August 12, 2026. Performance is to be delivered to Tracy, California, 95304-5000, under the NAICS code 213113, with Amanda Thomas of the ASC Commodities Division serving as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-11YN
This contract is for the procurement of five annular ball bearings identified by NSN 3110-01-385-4348 and part number 8817, supplied by ONTIC ENGINEERING & MANUFACTURING, INC and SAFRAN POWER USA LLC, under solicitation SPE4A6-26-T-11YN. The items are classified as commercial products and must comply with stringent military packaging, preservation, and marking standards including MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129. Preservation methods are determined by bearing type and closure, requiring adherence to specific lubricant and process controls outlined in MIL-DTL-197M. Packaging must be palletized per DLA requirements and marked with special codes as specified. The delivery is FOB origin with a 171-day lead time and zero variance in quantity allowed, with inspection and acceptance occurring at destination. Critical sourcing restrictions require that each bearing be manufactured in the United States, its outlying areas, or Canada, with over 50% of the cost of all bearing components originating from these regions, as mandated by DFARS 252.225-7016. Contractors must submit a formal declaration of domestic content, available via the DLA Foreign Bearing Waiver website, and failure to provide this may disqualify a quote. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and unspecified attributes are treated as major. The item is designated as critical application and subject to identification and marking requirements under RQ017. The contract may be cancelled or held pending waiver approval if no compliant bids are received, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the solicitation.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
SLED
Soil Vapor Well InstallationThe City of Pittsburg seeks a subcontractor to install soil vapor wells to assess potential vapor intrusion risks and collect soil vapor samples for laboratory analysis. This effort is focused on evaluating subsurface vapor migration that could impact indoor air quality, typically in areas with historical industrial activity or contamination concerns. The work involves precise drilling and installation of monitoring wells designed to capture representative vapor samples from various depths, following industry-standard protocols to ensure data reliability and regulatory compliance. The contract is open to qualified vendors with experience in environmental site assessment and vapor intrusion investigations, and responses must be submitted by September 11, 2026. Performance of the work is required within the city limits of Pittsburg, California, with the zip code 94565, under the NAICS code 213113 for support activities for mining.
City of Pittsburg

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 213113
New
SLED
Deeper-Zone Groundwater Monitoring Well InstallationThe contract involves drilling and installing deeper monitoring wells in Pittsburg, California, specifically to evaluate the vertical extent of groundwater contamination, with a focus on perchloroethylene (PCE). The work is critical for understanding how deeply and widely the contaminant has migrated below the surface, informing remediation strategies and long-term environmental management. This subcontract is part of an ongoing remediation effort by the City of Pittsburg and requires specialized drilling expertise to reach deeper aquifers without compromising the integrity of existing monitoring systems. The opportunity is open for response until September 11, 2026, with a posted date of August 4, 2026, and is classified under the NAICS code 213113 for drillers of oil and gas wells, indicating the technical nature of the drilling operations required. Performance of the work is strictly limited to the Pittsburg area with a zip code of 94565, and the project demands adherence to environmental standards and precise well construction protocols to ensure accurate data collection. There is no set-aside designation, and the contract does not specify a point of contact, requiring potential bidders to use the provided online link for further details and submission procedures.
City of Pittsburg

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 213113
New
SLED
Shallow-Zone Groundwater Monitoring Well InstallationThe City of Pittsburg is soliciting a subcontract to install monitoring wells in shallow aquifers to support groundwater sampling for petroleum-hydrocarbon contamination analysis. The project requires the deployment of properly constructed wells to access and collect representative samples from near-surface groundwater zones, ensuring accurate detection and assessment of hydrocarbon pollutants. Work must be performed within the city limits of Pittsburg, California, with a zip code of 94565, and must adhere to industry standards for well construction, sampling protocols, and environmental compliance. The solicitation was posted on August 4, 2026, and requires responses to be submitted no later than September 11, 2026, at 9:00 PM. This procurement is classified under NAICS code 213113, which pertains to support activities for mining, indicating a focus on field-based environmental monitoring services. All contractors must be prepared to meet technical and regulatory requirements for groundwater sampling and well installation in this specific geographic area.
City of Pittsburg

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 213113
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145G
The contract pertains to the supply of a gasket identified by NSN 5330-01-516-2090, with a quantity of 182 units, under solicitation SPE7L3-26-T-145G, which was posted on August 3, 2026, and requires responses by August 14, 2026. Delivery is due within 102 days after award, and the place of performance is Tracy, California, with a zip code of 95304-5000. The contract falls under NAICS code 213113 and is issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. All supplied items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specific functional uses such as batteries, fluorescent lights, sensors, weapon systems, and chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary as per NAVSEA 5100-003D. For items classified under Federal Supply Classes 5330 and 5331, which are susceptible to UV degradation, the gasket must be packaged and sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, and this packaging standard applies to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 213113
New
DIBBS
KNOB
Solicitation # SPE7LX-26-U-9133
The contract solicitation SPE7LX-26-U-9133 is a Total Small Business Set-Aside under FAR 19.5 for the procurement of 71 units of a KNOB item with an estimated contract value not to exceed $350,000.00, issued as an Indefinite Delivery Contract under simplified acquisition procedures. The requirement is tied to NSN 5355-01-461-6920 with a 54-day ADO delivery schedule and FOB ORIGIN terms, with all deliveries destined to locations within the continental United States. The solicitation references the DLA Master List of Technical and Quality Requirements, which governs all technical specifications identified by R or I numbers and supersede ASTM D3951 for packaging compliance. All packaging, marking, and labeling must strictly adhere to MIL-STD-129 for shipment and storage, including bar-coding and hazardous material labeling in accordance with DFARS 252.223-7001 and OSHA’s Hazard Communication Standard, with mandatory submission of Safety Data Sheets and hazardous material tables prior to award. The contract includes extensive cybersecurity and information safeguarding requirements, including DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, as well as prohibitions on covered telecommunications equipment and hexavalent chromium. Contractors must affirm small business status under NAICS 213113, disclose UEI and CAGE codes if providing covered defense equipment, and comply with all socioeconomic representations including joint venture disclosures. Payment must be submitted electronically via Wide Area WorkFlow (WAWF), and the Government will perform destination inspection and acceptance. The solicitation is open to small business offerors only, with award based on eligibility, price reasonableness, and compliance with technical, packaging, and regulatory mandates, with no formal trade-off evaluation or adjectival ratings specified. All proposals must be submitted electronically through the DIBBS portal by the deadline of August 18, 2026, and include required certifications, representations, and hazardous material documentation to avoid nonresponsiveness.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 213113
New
DIBBS
PLATE, RETAINING, BEA
Solicitation # SPE4A6-26-T-11EU
This contract pertains to the procurement of a retaining plate for bearing applications, identified by part number 2B7-2347 and NSN 3110012596281, with a required quantity of four units. The item is classified as a critical application component and must comply with stringent technical, quality, and packaging standards as defined by MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129 for preservation, packaging, packing, and marking. Preservation methods must be selected based on bearing type and closure, following specified tables and paragraphs within MIL-DTL-197M, including the application of appropriate protective lubricants and adherence to quality assurance protocols at the contractor’s facility. Packaging must conform to DLA-specific requirements and include palletization and special marking codes as outlined, with no variance allowed in delivered quantity. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the item or its contact surfaces, with only limited exceptions for functional applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specifically authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and have a secondary containment barrier as per NAVSEA 5100-003D. Importantly, all bearings must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the cost of each bearing component originating from these locations. Contractors are required to submit a formal declaration regarding the domestic or foreign origin of materials, failure of which will disqualify the quote. If no compliant offerings are received, the solicitation may be canceled or held pending a waiver. Delivery is required FOB origin within 288 days, with inspection and acceptance occurring at the destination. The solicitation is issued under contract number SPE4A6-26-T-11EU with a response deadline of August 10, 2026, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
SLED
Geotechnical Drilling – Hollow Stem Auger BoringsThe contract requires the performance of ten hollow stem auger borings at a site in San Diego, with each borehole extending to depths between 10 and 30 feet. The work includes collecting soil samples at designated intervals, managing the temporary storage of drill cuttings on site, and fully restoring the ground surface to its original condition after drilling is complete. All activities must adhere to geotechnical standards to ensure accurate subsurface data collection and environmental compliance. The project is part of a subcontract under the San Diego Unified Port District and is classified under NAICS code 213113, indicating it relates to oil and gas field drilling services, though the actual scope is strictly geotechnical in nature. Execution is expected to follow protocols that prioritize safety, minimal site disruption, and proper documentation of subsurface findings for engineering and planning purposes.
San Diego Unified Port District

POSTED

13 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 493190
New
DIBBS
Packaging, Labeling, and Shipping of Defense SuppliesThe contract requires compliant packaging, labeling, and shipment of mounting plates in accordance with DLA standards, specifically MIL-STD-129 for military labeling, ASTM D3951 for commercial packaging, and RP001 palletization guidelines to ensure uniformity and readiness for military logistics. All work must adhere strictly to these specifications to guarantee proper identification, handling, and traceability throughout the defense supply chain. The items are to be delivered to a designated performance location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, ensuring alignment with DLA’s logistical infrastructure and warehouse reception protocols. This is a subcontract solicitation under NAICS code 493190, issued by the Department of Defense through the Land Supply Chain organization, with a response deadline of August 19, 2026. The solicitation is open for submissions and requires contractors to demonstrate capability in meeting rigorous defense packaging and transportation benchmarks. The absence of set-aside designation suggests it is open to all qualified small and large businesses, and all proposals must be submitted via the DIBBS portal using the provided link before the deadline to be considered for award.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
Precision Metal Fabrication of Mounting PlatesThe contract calls for the manufacture and delivery of ten precision mounting plates specified under NSN 5340-01-590-0080, with strict adherence to military specifications governing design, material composition, and dimensional tolerances. Full material traceability is required throughout the production process, ensuring every batch of raw material can be linked to its origin and certification, and facility change controls must be implemented to document and approve any alterations to manufacturing methods, equipment, or locations to maintain consistency and quality. Performance is designated for New Cumberland, Pennsylvania, with the work falling under NAICS code 332722 for other metal forging and stamping operations. This is a subcontract opportunity issued by the Department of Defense through the Land Supply Chain, with a response deadline of August 19, 2026, and the solicitation posted on August 5, 2026. The effort requires compliance with defense production standards, emphasizing quality assurance, documentation integrity, and operational control to support military equipment systems. All production activities must be executed under conditions that ensure repeatable precision and regulatory alignment, with no deviations permitted without formal approval and recordkeeping.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
Supply of Installer, Bushing (End-Item Manufacturer or Distributor)The contract involves the manufacture or supply of a single bushing installer as a finished end item that must fully comply with applicable military or federal specifications. The item must be delivered in complete, ready-to-use condition and meet all technical, quality, and performance standards required by defense procurement guidelines. The contractor is responsible for ensuring compliance with hazardous materials disclosure and labeling requirements, including proper documentation and placement of safety and regulatory markings per federal mandates. The solicitation is classified as a subcontract under NAICS code 332999, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Performance is required at Fort Riley, Kansas, with a specific zip code of 66442-0345. The contracting agency is the Department of Defense through the Land Supply Chain organization. No set-aside preferences are indicated, and no point of contact details are provided in the posting. All submissions must be made through the designated DIBBS platform using the provided link.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
Supply of Fluid Filter (NSN: 2910-01-546-4764; P/N: FF5289)
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
DPAS-Rated Order Fulfillment & Logistics CoordinationThe contract requires the successful bidder to coordinate and prioritize shipments rated under the Defense Priorities and Allocations System (DPAS) as outlined in 15 CFR Part 700, ensuring the timely delivery of critical defense-related supplies. This subcontract focuses exclusively on logistics management for high-priority materiel, with performance centered at Cherry Point, North Carolina, under the oversight of the Department of Defense's Land Supply Chain. The contractor must possess the capability to monitor, schedule, and expeditiously move DPAS-rated orders through the supply chain, aligning with federal priorities to support national defense objectives without delay. The solicitation was posted on August 5, 2026, with responses due by August 19, 2026, and falls under NAICS code 484220, which pertains to general freight trucking. The place of performance is clearly defined at the Cherry Point location with the zip code 28533-5040, and all activities must comply with the strict timelines and allocation protocols mandated by DPAS regulations. While no set-aside designation or point of contact is specified, the contract’s success hinges on the contractor’s proven experience in managing regulated defense logistics and ensuring compliance with federal prioritization systems to avoid disruptions in critical supply chains.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Traceability & Documentation ServicesThe contract requires comprehensive supply chain traceability and documentation services to ensure full compliance with Department of Defense and federal audit standards, specifically for the Land Supply Chain division. The contractor must deliver complete chain-of-custody records and detailed compliance reporting to support transparency and accountability throughout the supply chain process, with all deliverables aligned to meet stringent DLA audit requirements. Performance is focused at Cherry Point, North Carolina, with a zip code of 28533-5040, and all work must be completed in accordance with the NAICS code 541618, which encompasses other business support services. The solicitation is classified as a subcontract and was posted on August 5, 2026, with a firm response deadline of August 19, 2026. There is no set-aside designation specified, meaning any qualified entity may submit a proposal. All deliverables must be meticulously documented to withstand federal scrutiny, emphasizing accurate, real-time tracking and verifiable documentation from origin to final delivery. The point of contact details are not provided, but the official solicitation interface is accessible via the DIBBS portal at the listed URL for further submission and procedural information.
Other Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging & Labeling ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services that meet stringent Department of Defense and federal standards. This includes the use of vapor corrosion inhibitors and desiccants to protect sensitive military equipment during storage and transit, along with precise marking and documentation to ensure traceability and compliance. All work must adhere to the specifications outlined by the Defense Logistics Agency, ensuring that items remain in optimal condition through the supply chain. The performance location is designated as Cherry Point, North Carolina, with a zip code of 28533-5040, indicating the primary site for execution and delivery. The solicitation, posted on August 5, 2026, has a response deadline of August 19, 2026, and is classified as a subcontract under NAICS code 561910, which pertains to support activities for transportation. The contracting agency is the Land Supply Chain within the Department of Defense, emphasizing the critical role this service plays in maintaining readiness and logistics efficiency. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors, and participation is expected to align fully with military logistics protocols, ensuring compatibility with existing supply chain systems and inspection requirements.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
Protective Plug Manufacturing & SupplyThe contract requires the manufacture and supply of 1,080 units of protective dust and moisture seal plugs, identified by NSN 5340-00-433-3253, with strict adherence to military specifications and DLA supply chain standards. The items must meet rigorous quality and performance requirements to ensure operational readiness in demanding environments. The work is expected to be performed at Cherry Point, North Carolina, with a delivery timeline aligned to the defense logistics infrastructure. This is a subcontract opportunity under NAICS code 332510, posted on August 5, 2026, with responses due by August 19, 2026. The contracting activity falls under the Land Supply Chain division of the Department of Defense, and the procurement is managed through the DIBBS platform. While no set-aside designation is specified, all bidders must demonstrate compliance with military-grade manufacturing processes and certified logistical support to meet the agency’s procurement obligations.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
Supply of Loop Clamps (NSN 5340-15-118-3845)The contract requires the manufacture, packaging, and delivery of 57 units of CLAMP, LOOP with NSN 5340-15-118-3845, classified as a commercial item and governed by Department of Defense specifications including MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling requirements. The work must be performed in accordance with established military standards to ensure compatibility, durability, and traceability within defense logistics systems. The product is to be delivered to the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation is issued as a subcontract under NAICS code 332510, which pertains to forged and stamped metal product manufacturing, and is managed by the Land Supply Chain organization under the Department of Defense. The opportunity was posted on August 5, 2026, and responses are due by August 14, 2026. There is no set-aside designation, and the contract is open to general commercial suppliers capable of meeting all technical, packaging, and delivery requirements as defined by DLA standards. All submissions must align with the specifications outlined in the referenced military standards and be delivered to the designated location by the stated deadline.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
DIBBS
Freight and Heavy Haul TransportationThe contract, titled Freight and Heavy Haul Transportation, is a subcontract under the Department of Defense’s LAND SUPPLY CHAIN agency, aimed at transporting oversized or heavy construction materials, equipment, and components to designated project sites. It is classified under NAICS code 484220, which pertains to truck transportation for heavy and specialized freight, and is open for bidding with a response deadline of August 25, 2026. The work will involve coordinating complex logistics for loads that exceed standard dimensions or weight limits, requiring specialized equipment, permits, route planning, and compliance with safety and regulatory standards. Performance is expected to occur across unspecified locations tied to DoD infrastructure projects, with bidders responsible for ensuring timely, secure, and damage-free delivery under potentially challenging conditions. There is no set-aside designation, making this opportunity available to all qualified contractors regardless of business size or category.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 541620
New
DIBBS
Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation seeks subcontractors to provide environmental site assessments, permitting support, stormwater management, and remediation oversight services under a subcontract arrangement. The solicitation is managed by the Department of Defense through the LAND SUPPLY CHAIN organization and is classified under NAICS code 541620, which corresponds to environmental consulting services. The opportunity was posted on August 5, 2026, with a response deadline of August 25, 2026, and is intended to support environmental compliance efforts across unspecified federal properties. While the exact location of performance is not specified, work is expected to align with Department of Defense environmental standards and regulatory requirements. The subcontractor will be responsible for delivering technical expertise in environmental assessment and remediation activities to ensure adherence to applicable laws and mitigation of site-specific environmental risks.
Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Site LayoutThe contract pertains to surveying and site layout services essential for construction activities, encompassing topographic surveying, boundary determination, and precise spatial positioning of development elements. These tasks are critical to ensuring accurate planning and execution of infrastructure projects, with deliverables requiring high precision to meet engineering and regulatory standards. The work is solicited as a subcontract under NAICS code 541370, which classifies it within the surveying and mapping services sector, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The solicitation was posted on August 5, 2026, with a firm response deadline of August 25, 2026, indicating a four-week window for potential subcontractors to submit proposals. Although specific location details for performance are not provided, the project is tied to U.S. Department of Defense operations, suggesting potential work on military installations or defense-related infrastructure. The absence of set-aside designation implies the opportunity is open to all eligible contractors, and interested parties must access the official DIBBS portal to obtain full solicitation documentation and submission requirements.
Surveying and Mapping (except Geophysical) Services

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details