Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GOVERNMENT FIRST ARTIC

Active
SPE7L2-26-T-0591Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item specified is a shaft with a shoulder, identified by NSN 0001S00000052, with a quantity of four units required under purchase request 7017385625. Delivery is scheduled 614 days after award, and the procurement is governed by the solicitation SPE7L2-26-T-0591, posted on August 5, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 213113 and is managed by the Department of Defense’s Land Supplier Operations Wheeled Vehicles, with performance to occur in Tracy, California. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any transfer or disclosure to foreign persons within or outside the United States without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only DLA contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and formal approval from DLA may access or handle this technical data. The contractor must also be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a accredited third-party assessment organization. All distribution and handling of technical data must comply with DLA’s packaging and data control requirements as outlined in the referenced procurement guidelines.

General Info

Four shafts with shoulder, delivery in 614 days, ITAR/EAR controlled, CMMC Level 2 required, DLA procurement.

Agency

Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLESView Agency

NAICS

213113 - Support Activities for Coal MiningView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L2-26-T-0591 for DLA Land and Maritime Wheeled Vehicles

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
View Agency Profile
Office AddressUS
Contacts
Shaun Sehgal
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHAFT,SHOULDERED
SHAFT,SHOULDERED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 4 EA Purchase Request: 7017385625QTY - See Solicitation Delivery: 614 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 213113
New
DIBBS
SHAFT ASSEMBLY, CONT
Solicitation # SPE7L3-26-T-150L
The contract pertains to the procurement of eight shaft assemblies identified by NSN 2520-00-017-2563 under solicitation SPE7L3-26-T-150L, with a required delivery within 20 days after award. The item involves technical data subject to export control under either ITAR or EAR, restricting any disclosure to foreign persons regardless of location, including foreign nationals within the United States and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and access to the technical data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. Additional requirements include adherence to CMMC Level 2 certification by the assessing third-party organization and compliance with phosphate coating supplier certification standards. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office, with Lee Miller designated as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 213113
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-919R
The contract is for the procurement of 85 retaining straps with NSN/Part Number 5340-01-089-4199 under solicitation SPE7L1-26-T-919R, issued as a total small business set-aside under FAR 19.5. Delivery is required within 154 days after award, and the place of performance is specified as New Cumberland, PA with ZIP code 17070-5002. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation or award date depending on acquisition type. The contract prohibits the use of Class I ozone-depleting chemicals entirely, overriding any conflicting specification requirements unless substitute chemicals are pre-approved. Export-controlled technical data applies under ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location, and demands compliance with DFARS 252.225-7048; access to such data is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal DLA authorization. The contractor must also self-assess against Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements. All supplies must have government identification removed if not accepted. The contract is publicly posted with a response deadline of August 17, 2026, and primary point of contact is Isabelle Szulewski at DLA.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 213113
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12GV
This contract is for the procurement of 79 units of a quick release pin identified by NSN 5315-01-494-3040 and part number NASM14531-2C334211, manufactured in accordance with the non-government standard NASM14531 and referenced standards NAS1322 through NAS1326 Revision 04. All hardware must comply with the current revision of these standards, and previously manufactured items meeting earlier valid revisions are acceptable only if they were produced under then-current requirements. The item is classified as a critical application component, and inspection and acceptance occur at the manufacturer’s origin. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required in the sample unless otherwise specified. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization conforming to DLA’s packaging requirements, and all DLA Master List technical and quality requirements take precedence over ASTM standards. The contract specifies a delivery timeline of 171 days from award, with a required delivery date of December 13, 2026, and a need ship date of January 31, 2027. Delivery is FOB origin, with no variance allowed in quantity. The purchase price is $79.00 per unit for a total of $6,241.00. The contracting office is the ASC Commodities Division under the Department of Defense, with Samantha Hopkins as the primary point of contact. The order is solicited under SPE4A6-26-T-12GV with a response deadline of August 12, 2026, and shall be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-11ZA
The item under contract is a thrust washer bearing with NSN 3120-01-503-9131, quantity of 17 units, to be delivered within 171 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition type. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at the point of origin, and unaccepted supplies must have all government identification removed. Item Unique Identification is not required per the service customer’s request. Technical data associated with this item is subject to export controls under ITAR or EAR, and no export—including disclosure to foreign persons in the U.S.—is permitted without prior authorization from the Department of State or Commerce; DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandated training and questionnaires, and have received formal approval from DLA. The solicitation number is SPE4A6-26-T-11ZA, posted on August 4, 2026, with responses due August 12, 2026. Performance is to be delivered to Tracy, California, 95304-5000, under the NAICS code 213113, with Amanda Thomas of the ASC Commodities Division serving as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-11YN
This contract is for the procurement of five annular ball bearings identified by NSN 3110-01-385-4348 and part number 8817, supplied by ONTIC ENGINEERING & MANUFACTURING, INC and SAFRAN POWER USA LLC, under solicitation SPE4A6-26-T-11YN. The items are classified as commercial products and must comply with stringent military packaging, preservation, and marking standards including MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129. Preservation methods are determined by bearing type and closure, requiring adherence to specific lubricant and process controls outlined in MIL-DTL-197M. Packaging must be palletized per DLA requirements and marked with special codes as specified. The delivery is FOB origin with a 171-day lead time and zero variance in quantity allowed, with inspection and acceptance occurring at destination. Critical sourcing restrictions require that each bearing be manufactured in the United States, its outlying areas, or Canada, with over 50% of the cost of all bearing components originating from these regions, as mandated by DFARS 252.225-7016. Contractors must submit a formal declaration of domestic content, available via the DLA Foreign Bearing Waiver website, and failure to provide this may disqualify a quote. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and unspecified attributes are treated as major. The item is designated as critical application and subject to identification and marking requirements under RQ017. The contract may be cancelled or held pending waiver approval if no compliant bids are received, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the solicitation.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
SLED
Soil Vapor Well InstallationThe City of Pittsburg seeks a subcontractor to install soil vapor wells to assess potential vapor intrusion risks and collect soil vapor samples for laboratory analysis. This effort is focused on evaluating subsurface vapor migration that could impact indoor air quality, typically in areas with historical industrial activity or contamination concerns. The work involves precise drilling and installation of monitoring wells designed to capture representative vapor samples from various depths, following industry-standard protocols to ensure data reliability and regulatory compliance. The contract is open to qualified vendors with experience in environmental site assessment and vapor intrusion investigations, and responses must be submitted by September 11, 2026. Performance of the work is required within the city limits of Pittsburg, California, with the zip code 94565, under the NAICS code 213113 for support activities for mining.
City of Pittsburg

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 213113
New
SLED
Deeper-Zone Groundwater Monitoring Well InstallationThe contract involves drilling and installing deeper monitoring wells in Pittsburg, California, specifically to evaluate the vertical extent of groundwater contamination, with a focus on perchloroethylene (PCE). The work is critical for understanding how deeply and widely the contaminant has migrated below the surface, informing remediation strategies and long-term environmental management. This subcontract is part of an ongoing remediation effort by the City of Pittsburg and requires specialized drilling expertise to reach deeper aquifers without compromising the integrity of existing monitoring systems. The opportunity is open for response until September 11, 2026, with a posted date of August 4, 2026, and is classified under the NAICS code 213113 for drillers of oil and gas wells, indicating the technical nature of the drilling operations required. Performance of the work is strictly limited to the Pittsburg area with a zip code of 94565, and the project demands adherence to environmental standards and precise well construction protocols to ensure accurate data collection. There is no set-aside designation, and the contract does not specify a point of contact, requiring potential bidders to use the provided online link for further details and submission procedures.
City of Pittsburg

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 213113
New
SLED
Shallow-Zone Groundwater Monitoring Well InstallationThe City of Pittsburg is soliciting a subcontract to install monitoring wells in shallow aquifers to support groundwater sampling for petroleum-hydrocarbon contamination analysis. The project requires the deployment of properly constructed wells to access and collect representative samples from near-surface groundwater zones, ensuring accurate detection and assessment of hydrocarbon pollutants. Work must be performed within the city limits of Pittsburg, California, with a zip code of 94565, and must adhere to industry standards for well construction, sampling protocols, and environmental compliance. The solicitation was posted on August 4, 2026, and requires responses to be submitted no later than September 11, 2026, at 9:00 PM. This procurement is classified under NAICS code 213113, which pertains to support activities for mining, indicating a focus on field-based environmental monitoring services. All contractors must be prepared to meet technical and regulatory requirements for groundwater sampling and well installation in this specific geographic area.
City of Pittsburg

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 213113
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145G
The contract pertains to the supply of a gasket identified by NSN 5330-01-516-2090, with a quantity of 182 units, under solicitation SPE7L3-26-T-145G, which was posted on August 3, 2026, and requires responses by August 14, 2026. Delivery is due within 102 days after award, and the place of performance is Tracy, California, with a zip code of 95304-5000. The contract falls under NAICS code 213113 and is issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. All supplied items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specific functional uses such as batteries, fluorescent lights, sensors, weapon systems, and chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary as per NAVSEA 5100-003D. For items classified under Federal Supply Classes 5330 and 5331, which are susceptible to UV degradation, the gasket must be packaged and sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, and this packaging standard applies to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 213113
New
DIBBS
KNOB
Solicitation # SPE7LX-26-U-9133
The contract solicitation SPE7LX-26-U-9133 is a Total Small Business Set-Aside under FAR 19.5 for the procurement of 71 units of a KNOB item with an estimated contract value not to exceed $350,000.00, issued as an Indefinite Delivery Contract under simplified acquisition procedures. The requirement is tied to NSN 5355-01-461-6920 with a 54-day ADO delivery schedule and FOB ORIGIN terms, with all deliveries destined to locations within the continental United States. The solicitation references the DLA Master List of Technical and Quality Requirements, which governs all technical specifications identified by R or I numbers and supersede ASTM D3951 for packaging compliance. All packaging, marking, and labeling must strictly adhere to MIL-STD-129 for shipment and storage, including bar-coding and hazardous material labeling in accordance with DFARS 252.223-7001 and OSHA’s Hazard Communication Standard, with mandatory submission of Safety Data Sheets and hazardous material tables prior to award. The contract includes extensive cybersecurity and information safeguarding requirements, including DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, as well as prohibitions on covered telecommunications equipment and hexavalent chromium. Contractors must affirm small business status under NAICS 213113, disclose UEI and CAGE codes if providing covered defense equipment, and comply with all socioeconomic representations including joint venture disclosures. Payment must be submitted electronically via Wide Area WorkFlow (WAWF), and the Government will perform destination inspection and acceptance. The solicitation is open to small business offerors only, with award based on eligibility, price reasonableness, and compliance with technical, packaging, and regulatory mandates, with no formal trade-off evaluation or adjectival ratings specified. All proposals must be submitted electronically through the DIBBS portal by the deadline of August 18, 2026, and include required certifications, representations, and hazardous material documentation to avoid nonresponsiveness.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 213113
New
DIBBS
PLATE, RETAINING, BEA
Solicitation # SPE4A6-26-T-11EU
This contract pertains to the procurement of a retaining plate for bearing applications, identified by part number 2B7-2347 and NSN 3110012596281, with a required quantity of four units. The item is classified as a critical application component and must comply with stringent technical, quality, and packaging standards as defined by MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129 for preservation, packaging, packing, and marking. Preservation methods must be selected based on bearing type and closure, following specified tables and paragraphs within MIL-DTL-197M, including the application of appropriate protective lubricants and adherence to quality assurance protocols at the contractor’s facility. Packaging must conform to DLA-specific requirements and include palletization and special marking codes as outlined, with no variance allowed in delivered quantity. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the item or its contact surfaces, with only limited exceptions for functional applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specifically authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and have a secondary containment barrier as per NAVSEA 5100-003D. Importantly, all bearings must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the cost of each bearing component originating from these locations. Contractors are required to submit a formal declaration regarding the domestic or foreign origin of materials, failure of which will disqualify the quote. If no compliant offerings are received, the solicitation may be canceled or held pending a waiver. Delivery is required FOB origin within 288 days, with inspection and acceptance occurring at the destination. The solicitation is issued under contract number SPE4A6-26-T-11EU with a response deadline of August 10, 2026, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
SLED
Geotechnical Drilling – Hollow Stem Auger BoringsThe contract requires the performance of ten hollow stem auger borings at a site in San Diego, with each borehole extending to depths between 10 and 30 feet. The work includes collecting soil samples at designated intervals, managing the temporary storage of drill cuttings on site, and fully restoring the ground surface to its original condition after drilling is complete. All activities must adhere to geotechnical standards to ensure accurate subsurface data collection and environmental compliance. The project is part of a subcontract under the San Diego Unified Port District and is classified under NAICS code 213113, indicating it relates to oil and gas field drilling services, though the actual scope is strictly geotechnical in nature. Execution is expected to follow protocols that prioritize safety, minimal site disruption, and proper documentation of subsurface findings for engineering and planning purposes.
San Diego Unified Port District

POSTED

13 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES

Same awarding agency

NAICS: 336320
New
DIBBS
LEVER, REMOTE CONTRO
Solicitation # SPE7L2-26-T-0590
The contract is for the procurement of 18 units of a lever, remote control identified by NSN 3040-00-083-0264 under solicitation SPE7L2-26-T-0590, with a delivery requirement of 154 days after order. The technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is strictly limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DLA training and questionnaire and received formal authorization. The NAICS code is 336320, and the place of performance is New Cumberland, PA, 17070-5002. The primary point of contact is Shaun Sehgal of the Department of Defense, Land Supplier Operations Wheeled Vehicles, reachable by phone or email.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L2-26-T-0592
The contract pertains to the procurement of 22 units of a shaft, shoulderered item with NSN 3040-01-196-1229, under solicitation SPE7L2-26-T-0592, with a delivery deadline of 154 days after award. Full and open competition applies, and the item requires Class 3 threads. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment supersedes it. The part must meet final dimensional tolerances of .4356-.4368 and .2481-.2493 only if it has the F-1.202 finish, excluding any plating dimensions. Ozone depleting chemicals are strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by the specification. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons, whether in the U.S. or overseas, and requires compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved JCP certification, completion of DLA-specific training, and authorization from DLA. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals and variance requests. Inspection and acceptance must occur at the origin, and government identification must be removed from non-accepted supplies. The place of performance is Tinker AFB, Oklahoma, and the contracting officer is Shaun Sehgal of the Department of Defense’s Land Supplier Operations – Wheeled Vehicles.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541511
New
DIBBS
Electronic Data Submission and WAWF Invoicing SupportThe contract requires the management of electronic submission of delivery data, inspection reports, and invoicing through the Wide Area WorkFlow WAWF system, ensuring full compliance with Department of Defense protocols for transactional documentation. All submissions must be accurately processed and transmitted electronically to support logistical and financial operations tied to the procurement of wheeled vehicles under the Land Supplier Operations umbrella. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with ZIP code 17070 5002, and the contract is structured as a subcontract under NAICS code 541511 for custom computer programming services. The solicitation was posted on August 3, 2026, with a firm response deadline of August 11, 2026, indicating a tight turnaround for potential offerors to submit proposals. Although no specific point of contact or set aside details are provided, the contracting activity is clearly under the Department of Defense, and the electronic data submission process is central to fulfilling contractual obligations. Offerors must be fully equipped to interface with the WAWF system, understand federal invoicing and inspection reporting standards, and maintain data integrity throughout the delivery and billing cycle.
Custom Computer Programming Services

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 561990
New
DIBBS
Specialized Packaging and Preservation ServicesThe contract requires specialized packaging, preservation, and marking of control assemblies in accordance with military standards to guarantee their integrity during long-term storage and transportation. All work must adhere strictly to established defense protocols to ensure the components remain protected from environmental degradation, physical damage, and corrosion throughout their lifecycle. The services encompass the full scope of preparation necessary to meet military-grade reliability and durability expectations, including appropriate materials, labeling, and handling procedures. The contract is classified as a subcontract under NAICS code 561990 and is issued by the Department of Defense’s Land Supplier Operations Wheeled Vehicles division. Performances must take place at the designated location in New Cumberland, Pennsylvania, with a response deadline of August 11, 2026. The solicitation was posted on August 3, 2026, and interested parties are expected to submit proposals by the specified cutoff date to meet the operational needs of the defense supply chain.
All Other Support Services

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2 Assessment and Implementation)The contract requires comprehensive support to achieve CMMC Level 2 compliance for a Department of Defense subcontractor, focusing on closing cybersecurity gaps, developing and implementing required security documentation and operational processes, and coordinating directly with an authorized C3PAO to facilitate official certification. Efforts must align with the CMMC framework’s specific controls for safeguarding controlled unclassified information, with all activities conducted at the place of performance in New Cumberland, Pennsylvania, under the agency designation of Land Supplier Operations Wheeled Vehicles. Subcontractors must demonstrate proven capability in navigating the CMMC assessment lifecycle, from initial gap analysis through final certification readiness, ensuring all technical and procedural requirements are met within the specified timeframe. Responses are due no later than August 11, 2026, and participation is limited to subcontractors under the NAICS code 541512 for Custom Computer Programming Services, indicating the work involves technical implementation of cybersecurity controls rather than general consulting. The contract does not specify set-aside status or point of contact information, and interested parties must access the full solicitation via the provided DIBBS link to submit proposals. Timing is critical, with the solicitation posted on August 3, 2026, and a narrow eight-day window to respond, emphasizing urgency in assembling qualified teams with prior CMMC Level 2 experience and established relationships with certified third-party assessment organizations.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 541380
New
DIBBS
Product Verification Testing (PVT) and Quality Inspection ServicesThe contract requires the performance of Product Verification Testing (PVT) and Quality Inspection Services on sample units, with a focus on verifying compliance through detailed examination of labeling, packaging, and overall product integrity. All testing activities must be conducted at the designated origin point, and the submission of complete, accurate test results to government inspectors is mandatory to satisfy regulatory and procurement requirements. The work is tied to the Department of Defense under the agency name Land Supplier Ops Wheeled Vehicles, with performance centered at New Cumberland, Pennsylvania, 17070-5002, ensuring that all deliverables meet federal standards for defense-related equipment. This is a subcontract opportunity under NAICS code 541380, which pertains to other scientific and technical consulting services, and it was posted on August 3, 2026, with a response deadline of August 11, 2026. Although no solicitation number has been assigned, the official reference is available via the DIBBS platform. There is no set-aside designation specified, and the contract does not identify a point of contact, requiring prospective bidders to review the full posting on the provided link for additional submission guidelines and procedural details. Compliance with all testing protocols and timely reporting are critical to successful contract execution.
Testing Laboratories and Services

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 336390
New
DIBBS
Precision Manufacturing of Transmission Control AssemblyThe contract calls for the precise manufacturing of a military-grade transmission control assembly in full compliance with Department of Defense technical specifications. The work includes design validation, end-to-end production, rigorous testing to meet operational standards, and timely delivery to the designated performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The subcontract is categorized under NAICS code 336390, indicating it falls within the other transportation equipment manufacturing sector, and is issued under the Land Supplier Operations Wheeled Vehicles organization. All deliverables must adhere to stringent military requirements to ensure reliability and performance in critical defense applications. The solicitation was posted on August 3, 2026, with a strict response deadline of August 11, 2026, and the procurement is managed through the DLA’s DIBBS system. While no set-aside provisions or agency point of contact are specified, the focus remains on securing a qualified subcontractor capable of executing the project with no deviations from mandated technical standards. Successful bidders must demonstrate proven expertise in defense-grade transmission systems and the ability to meet strict timelines without compromise to quality or certification protocols.
Other Motor Vehicle Parts Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 336350
New
DIBBS
CONTROL ASSEMBLY, TRANS
Solicitation # SPE7L2-26-Q-0011
The contract solicitation SPE7L2-26-Q-0011 seeks a single control assembly, transmission bearing restriction, identified by NSN 2520-01-535-2760, to be delivered to the DDSP New Cumberland Facility in Pennsylvania within 250 days after order. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality standards, configuration change management through engineering change proposals and variance requests, and mandatory qualification of components via Qualified Products or Manufacturers Lists. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, limiting access to contractors certified under the US/Canada Joint Certification Program who have completed required DLA export control training and approval. Cybersecurity compliance is enforced through CMMC Level 2 certification by a certified third-party assessment organization, with additional requirements for safeguarding covered defense information as outlined in DFARS 252.204-7016/7017/7018 and prohibitions on covered telecommunications equipment. Packaging and marking must strictly conform to SPI AK15352760 Revision A, supplemented by MIL-STD-2073-1E and MIL-STD-129, with preservation methods requiring military-grade standards and an absolute prohibition of mercury compounds. Item identification must follow MIL-STD-130N for unique identification marking and barcoding, and Product Verification Test Samples must be visibly labeled. Inspection and acceptance occur at origin, performed by the Government using MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances for critical characteristics and strict acceptance quality levels. The contract requires electronic invoicing through WAWF, with no paper submissions permitted, and mandates compliance with sustainable products and veteran employment reporting under approved deviations. The solicitation is not a small business set-aside, yet requires offerors to certify size status and provide a CAGE code or UEI. Pricing data is not provided in the solicitation, and the contract value remains unidentified, with award to be based on best value considering past performance, delivery capability, and price. Performance is restricted to the specified location, and any change to production facilities requires prior approval. All submissions must be made electronically via WAWF and fully comply with DLA’s technical, logistical, and security protocols.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2 Assessment Support)The contract supports achieving CMMC Level 2 certification by providing comprehensive cybersecurity compliance services, including a detailed gap assessment against NIST SP 800-171 and DFARS requirements, development of necessary documentation, and active coordination with a Certified Third-Party Assessment Organization to ensure alignment with federal cyber standards. The work is focused on preparing the organization for official assessment and certification, covering all technical, procedural, and administrative elements required under the CMMC framework. This subcontract is tied to the Department of Defense’s Land Supplier Opns Wheeled Vehicles initiative and requires performance at the location in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. It falls under NAICS code 541512, indicating it relates to computer systems design and related services, and is intended to enable defense contractors to meet mandatory cybersecurity obligations for handling controlled unclassified information within the supply chain.
Computer Systems Design Services

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials and Environmental Compliance ManagementThe contract requires the identification and comprehensive management of hazardous materials used in production processes, with a strict prohibition against the use of any ozone-depleting chemicals. All safety data sheets must be prepared in full compliance with OSHA’s 29 CFR 1910.1200 standards to ensure accurate documentation, handling, and emergency response protocols for toxic and hazardous substances. The scope encompasses ongoing monitoring, reporting, and administrative control of materials to meet environmental and workplace safety regulations, with a direct focus on maintaining compliance throughout the manufacturing lifecycle. This subcontract is issued under NAICS code 541620 and is associated with the Department of Defense’s Land Supplier Operations for Wheeled Vehicles, with performance required at the Anniston location with ZIP code 36201-4199. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. Although no set-aside classification or point of contact is specified, the contract underscores the necessity of strict environmental stewardship and regulatory alignment as part of defense supply chain obligations.
Environmental Consulting Services

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Technical Data and Drawing Compliance SupportThe contract requires engineering support to ensure compliance with the military technical drawings in the NR 19207 series, focusing on geometric dimensioning and tolerancing validation, accurate interpretation of technical drawings, and thorough documentation for audit purposes. This work is critical to maintaining precision and regulatory adherence in the manufacturing and assembly processes for wheeled vehicles under Department of Defense oversight. All deliverables must demonstrate strict alignment with established military specifications and provide clear, traceable records to support quality assurance and compliance reviews. The opportunity is structured as a subcontract with a NAICS code of 541330, indicating it falls under engineering services. The place of performance is specified as Anniston, Alabama, with a closing date for responses set for August 13, 2026, and the solicitation was posted on August 2, 2026. The work is managed under the Land Supplier Operations Wheeled Vehicles organization within the Department of Defense, and the contract will be administered through the DIBBS system using the reference number SPE7L226T0589. There is no set-aside designation, meaning all eligible subcontractors may compete for the award.
Engineering Services

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining and Assembly of Manual Control LeverThe contract entails the precision machining and assembly of three manual control levers identified by NSN 3040014911954, manufactured strictly in accordance with military drawings from the NR 19207 series and conforming to established quality standards including MIL-STD-1916 and ASQ Z1.4. All work must meet rigorous defense specifications to ensure reliability and performance under operational conditions, with production focused on achieving defect-free units through controlled processes and documented inspections. The contract is structured as a subcontract under NAICS code 332710, indicating specialized metal fabrication and machining activities for defense applications. Performance is required at the designated facility in Anniston, Alabama, with a response deadline of August 13, 2026, and the solicitation was posted on August 2, 2026. The awarding agency is the Department of Defense, specifically under Land Supplier Operations Wheeled Vehicles, reflecting the importance of this component in military ground vehicle systems. The contract does not specify a set-aside designation and is accessible through the DIBBS platform, with no point of contact listed publicly. All submissions must adhere to the technical and quality requirements without deviation, as compliance is critical for acceptance and integration into military platforms.
Machine Shops

POSTED

4 days ago

DEADLINE

in 7 days
View Details