This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 19, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Stretch wrap machines, with scales, delivered to Kaiserslautern Germany

Closed

SP4510-24-Q-1038Federal

Submission Closed09/03/2024, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333993

New

Federal

Vertrod Thermal Impulse Pneumatic Heat Sealer SupplierThis 8(a) sole source subcontract through the NASA Shared Services Center involves the procurement of two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for prime contractors operating at the NASA-Stennis Space Center. The required equipment must feature 48 inch seal lengths in both 3/8 inch and 1/2 inch widths, single side heater bars, and pneumatic low pressure jaw close safety systems. To meet operational standards, all machines must be compatible with ISO7 clean room environments. The supplier is responsible for delivering two fully configured and tested units, which include a 3 year limited warranty. This procurement falls under NAICS code 333993 and was posted on October 28, 2026, with a response deadline of November 2, 2026.

NASA Shared Services Center

POSTED

DEADLINE

Sealing Machines for CHOP Shop

Solicitation # 80NSSC26948111Q

NASA Shared Services Center is seeking to procure two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for the Critical Hardware Operational Processing shop at the Stennis Space Center. These machines will be used to create airtight and watertight seals for poly and aclar bags containing fittings, seals, o-rings, and crush washers, with one unit designated for a general clean room and the other for a newly constructed ISO7 clean room. The required equipment must be made in the USA, feature 48-inch seal lengths with one machine at 3/8 inch width and one at 1/2 inch width, and include a pneumatic low-pressure jaw close safety system, safety switch indication lights, and a three-year limited warranty. This procurement is being conducted under NAICS code 333993 as a commercial item acquisition following FAR Part 12. NASA intends to award a sole source contract to Government Affairs Institute, Inc. under the authority of FAR 12.102(a) and FAR 19.8 as an 8(a) set-aside. Interested organizations must submit capability statements to the primary point of contact, McKenzie Hanson, by 3:00 p.m. CST on November 2, 2026, to determine if the procurement will be competed. All items are to be shipped to Building 9166 at the Stennis Space Center in Mississippi.

NASA Shared Services Center

POSTED

DEADLINE

Box-Making Machine Replacement

Solicitation # NRS-26-70-C

The National Records of Scotland is seeking a provider for the supply, delivery, installation, commissioning, and training associated with a replacement box-making machine. This procurement includes the necessary software, warranty, maintenance, and support services to ensure the continued in-house production of archival storage boxes and preservation packaging essential for protecting national records. Interested parties must submit their responses by the deadline of November 27, 2026, at 12:00 PM. This solicitation, identified by number NRS-26-70-C, was officially posted on October 28, 2026. Further inquiries regarding this opportunity can be directed to the designated point of contact, Iona Cooper.

National Records of Scotland

POSTED

DEADLINE

Supply of Filler Opening Cap (NSN 5340016340030)This subcontract involves the sourcing or manufacture of a Filler Opening Cap, identified by NSN 5340016340030, to support prime contractors delivering for the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider must ensure the component complies with the DLA Master List of Technical and Quality Requirements and adheres to RP001 DLA Packaging Requirements for Procurement. The scope of work requires the delivery of one physical unit to a specified destination in Chambersburg, Pennsylvania. This opportunity falls under NAICS code 333993, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # F262450

The Royal Australian Mint is seeking a provider for the supply and commissioning of a cobot palletising system. The required system must be versatile enough to be compatible with a variety of carton sizes and different pallet arrangements to optimize operational efficiency. This solicitation, identified by number F262450, was posted on October 27, 2026, with a response deadline of November 23, 2026. While the Royal Australian Mint is the contracting agency, the place of performance is listed across multiple major Australian cities, including Canberra, Sydney, Melbourne, Adelaide, Perth, Brisbane, Darwin, and Hobart. Interested parties may contact Mark Fitzpatrick for further information.

Royal Australian Mint

POSTED

DEADLINE

Downhole Deployment Valve (DDV) Supply and InstallationThis subcontract involves the supply and installation of specialized Downhole Deployment Valves for prime contractors operating on Oil & Gas Development Company Limited projects in Pakistan. The scope of work includes deploying and setting valves at precise depths to isolate the wellbore or manage fluid flow during tool deployment, as well as the subsequent actuation and retrieval of these valves according to the established drilling program. To ensure operational safety and quality, all provided equipment must strictly adhere to API standards for downhole hardware. The primary objective of the contract is the delivery of fully installed and functional Downhole Deployment Valves. Interested parties must submit their responses by November 12, 2026.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Yellow Adhesive Supplier (NSN 8040-01-663-3917)This subcontract through the Defense Logistics Agency requires the supply of specialized yellow adhesive, identified by NSN 8040-01-663-3917, for prime contractors. The material must adhere to specifications for either Lockheed Martin P/N LMAML015F3/TU or 3M P/N 7000058946. Key requirements include a minimum extendable shelf life of 12 months and the provision of SDS and HCS labels in accordance with 29 CFR 1910.1200. The contract specifies the delivery of four 5.0-ounce units FOB Destination to Camp Lemonnier in Djibouti. All packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 333993, with a response deadline set for November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Purchase of Cardboard Baler

Solicitation # F2027043

Tarrant County is soliciting bids for the replacement of a cardboard baler at the Tarrant County Recycling Center under solicitation number F2027043. The project requires the awarded vendor to provide all labor and materials for the uninstallation and removal of the existing equipment and the installation of a new open-end automatic shear baler. Technical requirements for the new unit include an auto-tie system, a wire run-out sensor, a minimum total press weight of 25,350 pounds, a nominal hopper size of 30 by 30 inches, and a bale size of 30 inches wide by 40 inches deep with variable length. Safety features such as hinged access doors with safety interlocks for both the bale chamber and feed hopper are mandatory. Bidders must submit a vendor quote form, product specification sheets, warranty information, and oil and electrical system requirements. The contract will be awarded to the lowest bidder who meets all technical specifications and bids on all required items. All delivery costs, including labor, travel, fuel, freight, and the removal of current equipment, must be included in the installation pricing. Bidders must adhere to Tarrant County's General and Special Terms and Conditions, which include mandatory criminal background checks for personnel accessing county facilities and strict data security protocols for any IT-related solutions. The county also emphasizes its Historically Underutilized Businesses policy, targeting a 20 percent good faith goal for HUB participation. Invoices must be submitted to the Tarrant County Auditor's Office and reference a purchase order number, with payment typically issued within 30 days of receipt.

POSTED

DEADLINE

Biopharmaceutical Automated Fill Machine Isolator

Solicitation # 134-202627-001

Wilson Community College is soliciting proposals for the design, fabrication, and installation of an Automated Fill Machine Isolator unit for the Biomanufacturing Education and Skills Training (BEST) Center of Eastern North Carolina. The system will be integrated into simulated cleanrooms to provide a capstone training experience for students, focusing on manual aseptic processing and operator skill development rather than high-throughput production. The project encompasses multiple phases, including engineering and design, fabrication, Factory Acceptance Testing, onsite installation, commissioning, and final acceptance. While full GMP validation is not required, the equipment must meet OSHA standards and carry appropriate safety certifications from organizations such as ASME, UL, NEMA, or the American Gas Association. The contract is expected to be completed within one year of the effective date, with onsite installation anticipated after August 11, 2027. Payment is structured around milestone deliverables, with final payment contingent upon written acceptance by the BEST Center following successful inspection and training. Vendors must provide a comprehensive technical proposal, pricing, and certifications of financial condition, along with at least three customer references. The state also maintains an option for a maintenance agreement featuring two preventive safety inspections per year. Proposals are due by November 10, 2026, and will be evaluated based on a narrative consensus of strengths and weaknesses.

Wilson Community College

POSTED

DEADLINE

5600 Combo L’ Sealer and Tunnel Combination Machine SupplierThis subcontract agreement involves the supply of one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine intended for prime contractors working on State of Ohio Department of Administrative Services projects. The equipment package includes a machine with a 19 by 14 by 6 inch seal area, a precision temperature control tunnel, a 36F 3 ft Flighted Infeed Conveyor, and a Model 18-12SW Flexible Skate-wheel Conveyor. All provided machinery must exceed OSHA safety standards and be delivered as a fully functional unit accompanied by a spare parts kit. The procurement is managed by the Das105000 General Services Division Lzrs under NAICS code 333993. The solicitation was posted on October 16, 2026, with a response deadline set for November 2, 2026.

Das105000 General Services Division Lzrs

POSTED

DEADLINE

5600 Combo, Fully Automatic L’ Sealer and Tunnel Combination Machine

Solicitation # SRC0000042083

The State of Ohio Department of Administrative Services is soliciting quotes for one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine for use in Copy Center production. The equipment must feature a production speed of up to 30 packages per minute, a maximum seal area of 19 inches long by 14 inches wide by 6 inches high, and a variable speed drive from 0 to 95 FPM. Technical specifications include a chamber size of 18 inches wide by 7 inches high by 38 inches long and a precision temperature controller ranging from 0 to 400 degrees. The procurement also includes a 36F 3 ft flighted infeed conveyor, a Model 18-12SW 18 inch wide flexible skate-wheel conveyor, and a spare parts kit. Due to a 51 inch width entry restriction at the print shop, the machine must be delivered in separate pieces and assembled on-site. The awarded supplier must provide itemized pricing for installation and training. Safety is a critical requirement, as the machine must exceed OSHA safety standards with a fully enclosed seal area and safety interlocks on all doors, as well as built-in self-diagnostics on the control panel. Selection will be based on the lowest responsive and responsible quote. All bidders must be fully registered as suppliers with the State of Ohio through OhioBuys, OhioPays, and the Ohio Secretary of State.

Das105000 General Services Division Lzrs

POSTED

DEADLINE

Solicitation # 967-0928-27

The County of Solano, through the Sheriff's Office - Office of Emergency Services, is soliciting bids under RFQ 967-0928-27 for the procurement and delivery of one fully assembled, operational sandbagging machine. This equipment is intended to enhance emergency preparedness and operational resilience during flood and storm events by enabling the rapid production of up to 1,200 sandbags per hour with a four-person crew. The machine must feature a heavy-duty welded steel frame with a minimum 10-gauge steel hopper, forklift pockets, and a digital control panel. Key technical requirements include adjustable fill weights from 1 to 5,000 pounds, compatibility with various bag materials and fill substances such as sand, gravel, and soil, and the integration of dual hopper agitators, an industrial sewing system, and a compatible generator for use in locations without utility power. The contract is governed by the laws of the State of California and requires delivery F.O.B. destination to Fairfield, California, with a target delivery date of November 15, 2026. Award will be granted to the lowest responsive and responsible bidder. Proposers must submit their bids electronically via the OpenGov portal by November 2, 2026, including a vendor application, a signed signature page, and proof of non-debarment via SAM.gov. The successful vendor must provide a minimum two-year or one-million-cycle manufacturer's warranty and maintain comprehensive general liability and workers' compensation insurance. Additionally, vendors must comply with Cal/OSHA requirements regarding hazardous materials and provide Material Safety Data Sheets if applicable.

Sheriff's Office - Office of Emergency Services

POSTED

15 days ago

DEADLINE

in 4 days

General Info

Agency

Department Of Defense → DLA Disposition Services - Ebs

NAICS

333993 - Packaging Machinery Manufacturing

Place of Performance

MI, DEU

Set-Aside

NONE

Documents

Price Schedule - Stretch Wrap Machines for Kaiserslautern

1 page · specifications

High

SOW - Stretch Wrap Machine with Scale (DLA DS Kaiserslautern)

sow

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedAug 19

Combined Synopsis

Response DeadlineSep 3

Deadline has passed

Submission Closed

09/03/2024, 06:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Disposition Services - Ebs

Contacts1 person available

OfficeBATTLE CREEK, MI, 49037-3092, USA

Organization / Agency

Department Of Defense → DLA Disposition Services - Ebs

Office AddressBATTLE CREEK, MI, 49037-3092, USA

Contacts

Matthew Wonch

contact@example.gov

+1 (555) 000-0000

Full Description

DLA Disposition Services Two (2) Stretch wrap machines, with scales, delivered to Kaiserslautern Germany This is a combined synopsis/solicitation for commercial items/services prepared in accordance with FAR12 and 13. The required equipment is per the attached specifications, including its delivery timeframes. The procurement is under NAICS 333993. The requirement is placed for full and open competition. The following clauses will be included into the award: FAR 52.212-4, Contract Terms and Conditions Commercial Item; Far 52.212-5, Contract Terms and Conditions required to implement statutes or Executive Orders Commercial items. Offeror must submit Representations and Certifications (FAR 52.212-3). If an offeror has completed the annual representations and certificates electronically the offeror shall complete only paragraph (b) of this provision. Quotes are to be received no later than 2:00 p.m. Eastern Standard U.S. Time on the above specified date, via email only to the designated Contracting Officer. See Attachment for the Price Schedule and Specifications/Additional Terms. All contractor performance shall be in a safe manner, and in compliance with all applicable Federal, state, and local laws and regulations, and all installation policies. Any/all required documentation and service-related requirements including installation access are the responsibility of the contractor, with coordination as necessary with the site POC. Deliveries must be performed during normal installation work hours which are available from the above POC, excluding Federal holidays. Notes: Each offeror will clearly state the quoted products place of manufacture (country of origin). FAR 52.212-1 (Instructions to Offerors -- Commercial) (SEP 2023) All offerors shall submit detailed technical specification on the equipment being proposed for technical acceptability review. The detailed specification shall be complete to verify that all salient characteristics are met. FAR 52.212-2 (Evaluation -- Commercial Items) (NOV 2021) applies to this procurement (with evaluation consisting of award to the responsible contractor on the basis of the lowest evaluated price technically acceptable). FAR 52.212-3 (Offerors Representations and Certifications -- Commercial Items) (2023-O0002) (MAY 2024) FAR 52.212-3 Offeror Representations and Certifications'Commercial Products and Commercial Services--Alternate I (MAY 2024) FAR 52.212-4 (NOV 2023) (Contract Terms and Conditions -- Commercial Items) FAR 52.212-5 (MAY 2024) (Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items) applies to this procurement. - 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) - 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (DEC 2023) - 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) - 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015) - 52.233-3 Protest After Award (Aug 1996) - 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) - 52.204-27 Prohibition on a ByteDance Covered Application (JUN 2023) - 52.204-28, Federal Acquisition Supply Chain Security Act Orders'Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) - 52.204-30, Federal Acquisition Supply Chain Security Act Orders'Prohibition. (Dec 2023) - 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) - 52.222-3 Convict Labor (Jun 2003) - 52.222-19, Child Labor-Cooperation with Authorities and Remedies (FEB 2024) - 52.222-21, Prohibition of Segregated Facilities (Apr 2015) - 52.222-26, Equal Opportunity (Sep 2016) - 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) - 52.222-37, Employment Reports on Veterans (Jun 2020) - 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) - 52.222-50, Combating Trafficking in Persons (Nov 2021) - 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) - 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) - 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) The following additional FAR clauses apply to this procurement: 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (Jan 2017) 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) 52.204-7 System for Award Management (OCT 2018) 52.204-13 System for Award Management Maintenance (OCT 2018) 52.204-16 Commercial and Government Entity Code Reporting (AUG 2020) 52.204-17 Ownership or Control of Offeror (Aug 2020) 52.204-18 Commercial and Government Entity Code Maintenance (AUG 2020) 52.204-19 Incorporation by Reference of Representations and Certifications (DEC 2014) 52.204-20 Predecessor of Offeror (AUG 2020) 52.204-22 Alternative Line Item Proposal (JAN 2017) 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (NOV 2021) 52.204-26 Covered Telecommunications Equipment or Services-Representation (Oct 2020) 52.207-4 Economic Purchase Quantity -Supply AUG 1987 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations'Representation (NOV 2015) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (FEB 2016) 52.222-22 Previous Contracts and Compliance Reports (FEB 1999) 52.225-25 Prohibition on Contracting With Entities Engaging in Certain Activities or Transactions Relating to Iran'Representation and Certifications (Jun 2020) 52.232-23 Assignment of Claims (MAY 2014) 52.233-1 Disputes (MAY 2014) 52.232-39, Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Nov 2021) 52.247-34, FOB Destination (Nov 1991) The following DFARS clauses apply to this procurement: 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (Sep 2011) 252.203-7002, Requirement to Inform Employees of Whistleblower Rights (DEC 2022) 252.203-7005, Representation Relating to Compensation of Former DoD Officials (SEP 2022) 252.204-7003 Control of Government Personnel Work Product (APR 1992) 252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information (JAN 2023) 252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT (JAN 2023) 252.204-7016 Covered Defense Telecommunications Equipment or Services'Representation (DEC 2019) 252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services'Representation (MAY 2021) 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services (JAN 2023) 252.204-7024 Notice on the use of the Supplier Performance Risk System (MAR 2023) 252.211-7003 Item Unique Identification and Valuation (JAN 2023) 252.223-7008 Prohibition of Hexavalent Chromium (JAN 2023) 252.225-7000, BUY AMERICAN'BALANCE OF PAYMENTS PROGRAM CERTIFICATE'BASIC (FEB 2024) 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM'BASIC ( FEB 2024) 252.225-7002, QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (MAR 2022) 252.225-7005 Identification of Expenditures in the United States (JUN 2005) 252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (APR 2022) 252.225-7021 Trade Agreements'Basic (FEB 2024) 252.225-7048 Export-Controlled Items (Jun 2013) 252.225-7052 Restriction on the Acquisition of Certain Magnets and Tungsten (MAY 2024) 252.225-7055 Representation Regarding Business Operations with the Maduro Regime (MAY 2022) 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime (MAY 2022 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region'Representation (JUN 2023) 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region (JUN 2023) 252.225-7975 Additional Access to Contractor and Subcontractor Records (DEVIATION 2020-O0022) (AUG 2020) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (Dec 2018)) 252.232-7006 Wide Area WorkFlow Payment Instructions (JAN 2023) (By reference, full text provided in bilateral award) 252.244-7000 Subcontracts for Commercial Items (DEC 2022) 252.243-7001 Pricing of Contract Modifications (Dec 1991) 252.247-7023 Transportation of Supplies by Sea'Basic (JAN 2023) DLAD 5452.233-9001 DISPUTES - AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (JUN 2020) DLAD Procurement Notes: C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (SEP 2016) L06 Agency Protests (DEC 2016)