Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from California was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Structural Steel Fabrication and Erection

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312
New
ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)
Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf
Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.
Parsons Corporation

POSTED

about 6 hours ago

DEADLINE

in 4 days
NAICS: 332312
New
DIBBS
Marine Metal Door Manufacturer/SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the fabrication or procurement of seven marine-grade metal doors, identified as NSN 2040014437111. The supplier must utilize corrosion-resistant materials and ensure all units strictly adhere to MIL-STD-129 military marking standards and domestic material restrictions. The final products are to be packaged for FOB Origin shipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312, with performance taking place in New Cumberland. Interested parties must submit their responses by November 9, 2026. This contract serves prime contractors who are fulfilling broader DLA supply obligations.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Manufacturing of Mending Plates (NSN 5340-01-732-9372)This subcontract, issued by the DLA Weapons Support Land Supply Chain, requires the manufacture of 84 precision mending plates under NSN 5340-01-732-9372. The contractor must fabricate the units according to RBC Transport Dynamics Corp part number 180004 specifications and DLA technical requirements. All production must utilize Berry Amendment compliant materials and processes free of ozone-depleting chemicals. Deliverables must be packaged in accordance with MIL-STD-129 and ASTM D3951 standards. The opportunity is a total small business set-aside under NAICS code 332312, with performance located in New Cumberland. To be eligible, the contractor must provide a CMMC Level 2 self-assessment and obtain engineering source approval. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
Supply of Vehicular Component Brackets (NSN 2590016091130)This subcontract involves the manufacture or sourcing of 30 specialized vehicular component brackets for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The components must strictly adhere to Part Piece Number 12504326-010 and NSN 2590016091130 as specified in the technical drawings. Performance will take place in Tracy, California, under NAICS code 332312. Critical compliance mandates include strict adherence to Berry Amendment domestic sourcing requirements to ensure materials are produced within the United States. Additionally, the use of additive manufacturing is prohibited unless explicit authorization is granted. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Precision Tube Fabrication (NSN 1730-01-303-9285)This subcontract, issued by the Department of Defense under a Service-Disabled Veteran-Owned Small Business set-aside, requires the fabrication of 15 structural dolly tubes. The work must be performed in New Cumberland and adhere strictly to NSN 1730-01-303-9285 and MIL-STD-100G technical specifications. The contractor is expected to utilize precision tube cutting, bending, and welding equipment to deliver the completed units for prime contractors on DLA supply contracts. Compliance and security are critical components of this agreement. The selected provider must maintain CMMC Level 2 certification and ensure full adherence to DFARS 252.204-7012 as well as ITAR and EAR regulations. Interested parties must respond by November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Supplier of Structural Channels (NSN 9540-01-474-4371)This subcontract involves the supply of structural channels to prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals contracts. The selected supplier is responsible for manufacturing or sourcing materials that strictly adhere to the technical specifications of NSN 9540-01-474-4371. The scope of work includes rigorous quality control and palletization processes conducted in accordance with RP001 DLA Packaging Requirements for Procurement. The supplier is tasked with the final delivery of these palletized structural channels to a designated destination, with performance centered in the 10567-5000 zip code area.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
Supply of Internal Wrenching Bolts (NSN 5306015955093)
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 332312
New
DIBBS
Fabrication of LEVER, WELDMENT (NSN 1740-01-281-3606)This subcontract involves the fabrication of nine Lever Weldments for prime contractors supporting DLA Troop Support projects. The manufacturer must produce the parts according to Basic Drawing NR 30003 1500AS206 Revision D and ensure all welding is performed per MIL-W-8611A using certified equipment. All materials used in production must comply with the Buy American Act and the Berry Amendment. The contractor is required to maintain strict regulatory and security standards, including CMMC Level 2, ITAR/EAR compliance, and US/Canada Joint Certification Program certification. The final deliverable consists of nine fully inspected Lever Weldments. This project falls under NAICS code 332312 and is associated with the Department of Defense, with performance taking place in Tracy, California.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Vehicular Channel Supplier
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Fabrication of Chain Guide Mounting Brackets
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Precision Metal Fabrication - Tripod Jack BracesThis subcontract involves the precision fabrication of 166 Tripod Jack Braces for prime contractors supporting DLA Troop Support projects. The manufacturing process must strictly adhere to Basic Drawing 98750 44D9840 Revision K and Reference Drawing 98752 200415485 Revision E to produce units under NSN 1730-00-671-3302. The work requires the use of precision machining equipment, and the use of additive manufacturing is explicitly prohibited. Compliance requirements are stringent, necessitating CMMC Level 2 certification, DFARS 252.204-7012 compliance, and US/Canada Joint Certification Program status for ITAR and EAR regulations. The project is managed under NAICS code 332312 for the Department of Defense, with the place of performance located in New Cumberland. Responses to the solicitation are due by November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 12 days

AI Contract Overview

Show more

This contract involves the fabrication and on-site erection of structural steel components, specifically tailored for use in buildings or bridge construction projects. It is issued as a subcontract opportunity, focusing on the specialized NAICS code 332312, which pertains to structural steel fabrication. The work requires precise manufacturing and assembly expertise to ensure the steel components are constructed and installed to meet structural and safety standards. The solicitation is managed by OC Waste & Recycling in California, with a posting date of May 29, 2026, and a response deadline set for July 1, 2026. While specific location details for the place of performance and point of contact are not provided, interested parties can access further information through the designated OpenGov procurement portal. This opportunity emphasizes the importance of reliable, skilled subcontractors capable of contributing to large-scale infrastructure projects within the region.

General Info

Subcontract for structural steel fabrication and erection for buildings or bridges, California deadline July 1, 2026.

Agency

California → OC Waste & Recycling

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of RFP 299-3063702-AR.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RFP Prima Deshecha Landfill Renewable Energy Preliminary Design

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyCalifornia → OC Waste & Recycling
ContactsNo contacts available
OfficeN/A
Organization / AgencyCalifornia → OC Waste & Recycling
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Fabrication and on-site erection of structural steel components for buildings or bridges.

More opportunities from California → OC Waste & Recycling

Same awarding agency

NAICS: 562910
New
SLED
24/7 Emergency Hazardous Materials ResponseThis subcontract for 24/7 Emergency Hazardous Materials Response supports prime contractors on OC Waste and Recycling projects in California. The selected provider will deliver rapid-response staffing and equipment to manage spill emergencies, focusing on same-day on-site stabilization, the packaging of leaked materials, and the monitoring of flammable vapors using 4-gas/LEL monitors. All participating technicians must be HAZWOPER certified and maintain strict compliance with CFR Title 29 standards to ensure the safe removal and stabilization of hazardous materials. The solicitation is categorized under NAICS code 562910, with a response deadline set for November 25, 2026.
Remediation Services

POSTED

about 15 hours ago

DEADLINE

in 28 days
View Details
NAICS: 322214
New
SLED
Hazardous Waste Container and Absorbent SupplyThis subcontract for Hazardous Waste Container and Absorbent Supply supports prime contractors working on OC Waste & Recycling projects in California. The scope of work involves the manufacture and delivery of DOT-approved steel and plastic drums ranging from 5 to 85 gallons, as well as cubic yard boxes and specialized drums for fluorescent lamps. Additionally, the provider is responsible for supplying essential spill response and absorbent materials, including Visqueen, vermiculite, and HazCat kits, delivered directly to project sites. The opportunity is categorized under NAICS code 322214 and was posted on October 27, 2026. Interested parties must submit their responses by the deadline of November 25, 2026. This contract ensures that hazardous waste containment and spill mitigation supplies are readily available to maintain safety and regulatory compliance across agency projects.
Fiber Can, Tube, Drum, and Similar Products Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 28 days
View Details
NAICS: 562211
New
SLED
Hazardous Waste Treatment, Storage, and Disposal (TSDF)This subcontract for Hazardous Waste Treatment, Storage, and Disposal (TSDF) supports prime contractors on OC Waste & Recycling projects within California. The scope of work involves providing final destination treatment and disposal for various hazardous waste streams, specifically including the incineration of fuels, the recycling of rechargeable batteries, and the treatment of solar panels and compressed gases. The selected provider must operate a facility permitted by the U.S. EPA and maintain strict compliance with CFR Title 40 and the California Health and Safety Code. A key deliverable of the contract is the provision of Certificates of Disposal or Destruction to verify proper handling. The solicitation is categorized under NAICS code 562211, with a response deadline set for November 25, 2026.
Hazardous Waste Treatment and Disposal

POSTED

about 15 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541380
New
SLED
Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.
Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

in 28 days
View Details
NAICS: 562112
New
SLED
Hazardous Waste Hauling and Transportation ServicesThis subcontract for Hazardous Waste Hauling and Transportation Services involves the physical transport of hazardous materials for prime contractors working on OC Waste and Recycling projects. The selected provider will be responsible for loading and securing hazardous waste containers using specialized equipment, including vacuum trucks, roll-offs, and flatbeds, and ensuring all waste is delivered to U.S. EPA permitted disposal facilities. Strict adherence to regulatory standards is required, specifically regarding DOT-compliant placarding and the management of bills of lading and manifests in accordance with CFR Title 49. Personnel must possess valid Commercial Driver's Licenses with HazMat endorsements. The response deadline for this opportunity is November 25, 2026.
Hazardous Waste Collection

POSTED

about 15 hours ago

DEADLINE

in 28 days
View Details
NAICS: 562211
New
SLED
Hazardous Waste Collection & Disposal Services
Solicitation # RFP-299-3145701-JDW
OC Waste and Recycling is soliciting proposals for hazardous waste collection and disposal services under RFP-299-3145701-JDW. The selected contractor must be a California registered hazardous waste management business responsible for a full range of services, including staffing, sorting, recycling, treating, sampling, packaging, labeling, manifesting, transporting, and disposing of household hazardous waste from Orange County Landfills and Collection Centers. The contract is scheduled to begin on July 1, 2027, for an initial term of three years. Performance must comply with a rigorous set of federal and state regulations, including CFR Titles 29, 40, and 49, as well as California Code of Regulations Titles 8, 22, and 26, and the California Health and Safety Code. The procurement process involves a three-phase evaluation consisting of a written response, a presentation or interview, and a cost proposal. Bidders are evaluated on technical expertise, regulatory compliance, and their strategic approach, with specific preferences granted to certified Orange County Local Small Businesses and Disabled Veteran Business Enterprises. Proposals must be submitted by November 25, 2026, and must adhere to a strict 40-page limit for the main proposal section. The contractor is required to appoint a Project Manager and maintain strict adherence to the Materials Exchange Program Quality Assurance Plan and DOT placarding requirements. Payment is managed through the OC Waste and Recycling accounts payable office in Santa Ana, with options for Electronic Fund Transfer.
Hazardous Waste Treatment and Disposal

POSTED

about 15 hours ago

DEADLINE

in 28 days
View Details
NAICS: 484220
New
SLED
Hazardous Materials/Specialized Delivery (Bird Control Supplies)This subcontract involves the specialized transportation and delivery of bird control pyrotechnics and equipment for prime contractors operating on County of Orange OC Waste and Recycling landfill projects. The selected provider is responsible for ensuring the timely delivery of supplies to various landfill locations, with operational hours scheduled from Monday through Saturday, between 7:00 A.M. and 4:00 P.M. PST. Due to the nature of the materials being transported, the contractor must maintain strict OSHA compliance and hold valid DOT certification for the transport of hazardous materials. This project falls under NAICS code 484220 and is managed by OC Waste and Recycling in California.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

6 days ago

DEADLINE

in 13 days
View Details
NAICS: 423830
New
SLED
Bird Control Launching EquipmentThis subcontract for Bird Control Launching Equipment involves the supply of mechanical launching devices to prime contractors working on County of Orange OC Waste and Recycling landfill projects. The scope of work specifically requires the provision of single-shot and double-barrel launchers designed for the deployment of bird control pyrotechnics. All equipment must strictly adhere to OSHA standards and be delivered F.O.B. Destination within a mandatory two-week delivery window. The opportunity is categorized under NAICS code 423830, with a response deadline set for November 10, 2026.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

6 days ago

DEADLINE

in 13 days
View Details
NAICS: 424990
New
SLED
Bird Control Pyrotechnics (Cartridges and Bangers)This subcontract involves the supply of specialized pyrotechnic bird deterrents for prime contractors working on County of Orange OC Waste and Recycling landfill projects. The scope of work requires the provision and packaging of bird bangers and bird whistler cartridges, specifically those measuring 2 inches long and 15mm in diameter in green, delivered in cases of 100 rounds. All deliverables must be shipped F.O.B. Destination and must strictly adhere to OSHA standards. The supplier is required to meet a delivery window of two weeks. This opportunity is categorized under NAICS code 424990 and is managed by OC Waste and Recycling in California.
Other Miscellaneous Nondurable Goods Merchant Wholesalers

POSTED

6 days ago

DEADLINE

in 13 days
View Details
NAICS: 423840
New
SLED
BIRD CONTROL SUPPLIES
Solicitation # IFB-299-3162603-CS
The County of Orange, OC Waste & Recycling, is soliciting firm price bids under solicitation IFB-299-3162603-CS for the purchase and delivery of bird control supplies to be used at various landfill locations. This is an as-needed contract with a total value not to exceed 30,000 dollars. The contract will be awarded to the lowest responsive and responsible bidder, with specific price preferences of 5 percent for certified County of Orange Local Small Businesses (OCLSB) or Disabled Veteran Business Enterprises (DVBE), and 8 percent for those holding both certifications. Bids must be submitted electronically via the OpenGov portal by November 10, 2026, and must remain valid for 365 days. The selected contractor must respond to order requests within 48 hours and ensure delivery within two weeks, with shipments accepted Monday through Saturday from 7:00 A.M. to 4:00 P.M. PST. All deliveries are F.O.B. Destination, meaning the contractor is responsible for all prepaid transportation charges. Required contractual safeguards include a Faithful Performance Bond, a Labor and Material Payment Bond, and comprehensive insurance with a severability of interests clause. Additionally, the contractor must maintain a valid Unique Entity Identifier (UEI) and D-U-N-S number, comply with ADA and OSHA standards, and adhere to strict confidentiality and indemnification requirements to protect the County.
Industrial Supplies Merchant Wholesalers

POSTED

6 days ago

DEADLINE

in 13 days
View Details
NAICS: 325613
New
SLED
Organic Defoamer
Solicitation # IFB-299-3134901-AA
OC Waste & Recycling, an agency of the County of Orange, California, is soliciting bids under IFB-299-3134901-AA for the procurement and delivery of a commercially manufactured organic defoamer. The product is required to support the continuous operation of the Olinda Landfill leachate treatment system by rapidly controlling excessive foam to prevent operational disruptions and protect equipment. The defoamer must be compatible with leachate collection tanks, pumps, piping, and downstream processes. The contractor is responsible for determining the appropriate dosage rate, dosing location, and application method, while providing technical support during initial field testing and implementation. The contract will be awarded to the lowest responsive and responsible bidder, with price preferences available for certified Orange County Local Small Businesses (OCLSB) and Disabled Veteran Business Enterprises (DVBE). Bids must be submitted electronically via the OpenGov portal by November 6, 2026, at 2:00 pm. Required deliverables include the supply of the defoamer in 55-gallon drums and/or 275-gallon totes delivered to the Olinda Landfill in Brea, California. Shipments must include Safety Data Sheets, technical specifications, and batch identification. Contractual requirements include the provision of a Faithful Performance Bond and a Labor and Material Payment Bond, as well as comprehensive insurance coverage. Bidders must provide a valid Unique Entity Identifier (UEI), D-U-N-S number, and a signed W-9 form. Invoicing is conducted via the contractor's letterhead and submitted to OC Waste & Recycling, with payment available through Electronic Fund Transfer. All products must be delivered in new, properly sealed containers in compliance with federal, state, and local transportation and handling regulations.
Surface Active Agent Manufacturing

POSTED

7 days ago

DEADLINE

in 9 days
View Details
NAICS: 334516
SLED
TVA 2020 Toxic Vapor Analyzer
Solicitation # IFB-299-3142404-AA
OC Waste & Recycling is soliciting bids under IFB-299-3142404-AA for a firm fixed fee contract to purchase one Thermo Fisher Scientific TVA 2020 Toxic Vapor Analyzer. The instrument, which must include FID and PID capabilities, Bluetooth, GPS, and a full suite of accessories including a calibration kit and extender probes, will be used by trained personnel to monitor volatile organic compounds and hazardous vapors during landfill operations and environmental investigations. The equipment must be new, unused, and capable of withstanding harsh outdoor landfill conditions, including dust, dirt, and variable humidity. Delivery and final acceptance will take place at the Olinda Alpha Landfill in Brea, California, following a basic operational check and verification of factory calibration. Bids must be submitted electronically via the OpenGov portal by November 6, 2026, at 2:00 pm. Award determination is based on the lowest responsive and responsible bid, with cost preferences of 5% for certified Orange County Local Small Businesses (OCLSB) or Disabled Veteran Business Enterprises (DVBE), increasing to 8% for dual certification. Required submissions include a monetary sum for all items, a non-collusion declaration, and certification regarding debarment. The successful contractor must provide a Faithful Performance Bond and a Labor and Material Payment Bond, maintain strict confidentiality of County records, and comply with federal non-discrimination and accessibility laws.
Analytical Laboratory Instrument Manufacturing

POSTED

8 days ago

DEADLINE

in 9 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332312
Closed
SLED
Structural Steel Fabrication and Erection
City Of Louisville

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
Closed
SLED
Aluminum Stop Logs Supply and Installation
Department of Natural Resources

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
SLED
Fence Materials Supply (Prefabricated Panels, Posts, Gates)
Caltrans 2 (Redding)

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 332312
SLED
Structural Steel and Framing
City of Burlingame

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 332312
Closed
SLED
Supply of #8 Rebar (Bent, Non-Coated)
West Virginia

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
Closed
SLED
Supply of #8 Rebar (Straight, Non-Coated)
West Virginia

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
Closed
SLED
Supply of #6 Rebar (Bent, Non-Coated)
West Virginia

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
Closed
SLED
Supply of #6 Rebar (Straight, Non-Coated)
West Virginia

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
Closed
SLED
Supply of #4 Rebar (Straight, Epoxy-Coated)
West Virginia

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
Closed
SLED
Supply of #4 Rebar (Bent, Non-Coated)
West Virginia

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
Closed
SLED
Supply of #4 Rebar (Straight, Non-Coated)
West Virginia

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
Closed
SLED
Lighting Poles and Mounting Hardware Supply
F&A-Contracts Administration and Materials Management

POSTED

5 months ago

CLOSED

5 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS