Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Structural Steel Fabrication and Erection for Charging Canopies

Active

State & Local

Response Deadline09/25/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the design, fabrication, and installation of steel canopy and gantry structures to provide protective shelter for zero-emission bus charging stations, with an emphasis on seismic-resistant engineering. Deep foundation systems using cast-in-drilled-hole piles are required to ensure structural stability and durability under demanding environmental conditions. The work must comply with rigorous engineering standards to support heavy loads and endure long-term exposure to weather and seismic forces. All components must be fabricated to precise specifications and professionally erected on-site to meet performance and safety requirements. The project is classified under NAICS code 238120 for structural steel fabrication and erection, and is issued as a subcontract under the agency name Engineering and Program Delivery in California. The solicitation was posted on July 15, 2026, with a response deadline of September 25, 2026. The place of performance is not specified in detail, but the work is intended to support ZEB charging infrastructure across the state. Contractors must demonstrate capability in handling complex steelwork, deep foundation installation, and seismic design compliance, with no set-aside provisions indicated.

General Info

Design, fabricate, and install seismic-resistant steel canopies and gantries for ZEB charging stations with deep foundation piles.

Agency

California → Engineering and Program DeliveryView Agency

NAICS

238120 - Structural Steel and Precast Concrete ContractorsView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Response DeadlineSep 25

Submission deadline

Response Deadline

09/25/2026, 09:00:00 PM UTCin 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Engineering and Program Delivery

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Engineering and Program Delivery

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, fabrication, and installation of steel canopy and gantry structures with deep foundations (CIDH piles) to shelter ZEB charging stations, including seismic-resistant design.

Similar Contracts

Same NAICS industry code

DD1 - VA CLASS PROPULSOR ENCLOSURE PHASES 1 & 2 LOCATED IN PORTSMOUTH NAVAL SHIPYARD (KITTERY, MAINE) IN SUPPORT OF THE SHIPYARD INFRASTRUCTURE OPTIMIZATION PROGRAM (SIOP)Naval Facilities Engineering Systems Command (NAVFAC) Atlantic is conducting market research through a sources sought synopsis to evaluate the availability of qualified small businesses for a potential major construction and fabrication project at Portsmouth Naval Shipyard in Kittery, Maine. The effort is part of the Shipyard Infrastructure Optimization Program and involves the fabrication and delivery of three major steel structures: one 5-story portable modular work enclosure weighing approximately 150 tons, two 90-foot truss-style material handling bridges totaling 80 tons of fabricated steel, and a concrete slab-on-grade storage pad to support the enclosure. All steel components must be fabricated by an AISC-certified fabricator and delivered by barge. The project may include options for one additional enclosure and two additional bridges. The government is not issuing a solicitation at this time and will use responses to determine whether a small business set-aside is appropriate under FAR 19.104-1(a), with a focus on SBA-certified firms including 8(a), HUBZone, SDVOSB, WOSB, and EDWOSB entities. The estimated construction cost range is $25 million to $100 million, with the NAICS code 238120 and a small business size standard of $19 million. Interested parties must submit a capabilities package including a completed contractor and project information form, demonstrating experience on at least three relevant projects completed within the past ten years. Each project must have a final construction cost of at least $10 million, with one exceeding $20 million, and must showcase custom steel fabrication involving atypical connections or relocatable modular assemblies. Submitters must also prove experience in four key areas: multi-stage fabrication and barge-based installation of steel structures, self-performance of concrete slab-on-ground work with post-installed anchors, application of hot-dipped galvanizing, and application of multi-part epoxy coatings. These capabilities may be demonstrated across multiple projects but must collectively cover all four elements. Experience must be that of the submitting firm as prime or subcontractor, not proposed subcontractors. The submission is limited to ten single-sided pages in 12-point Times New Roman font, must not exceed 5MB, and is due by August 3, 2026. The government will not pay for any information received, will not be bound to proceed with procurement, and reserves the right to cancel this effort at any time without obligation.

Navfacsyscom Atlantic

POSTED

about 15 hours ago

DEADLINE

Bituminous Prime Coat ApplicationThe contract seeks a subcontractor to apply a bituminous prime coat to base layers as a preparatory step for subsequent asphalt paving operations. This work is essential to ensure proper adhesion between the base and the asphalt surface, requiring strict adherence to material specifications and application techniques to meet industry standards for durability and performance. The contract is classified under NAICS code 238120, indicating it pertains to paving and paving equipment contracting services, and is managed by the Public Works department of New Mexico. The solicitation was posted on July 19, 2026, with a response deadline of August 12, 2026, providing interested parties approximately four weeks to submit proposals. The place of performance and specific location details are not specified, suggesting the work may occur across multiple sites within New Mexico under the agency’s jurisdiction. While no set-aside provisions or funding allocation details are outlined, the contract is structured as a subcontract, indicating it supports a larger public infrastructure project. Interested contractors must be prepared to comply with technical requirements for prime coat application, including material consistency, environmental conditions during application, and quality control measures.

POSTED

DEADLINE

Structural Steel ErectionThe contract entails the fabrication and erection of a structural steel frame, encompassing columns, beams, and bracing, for a project under the California Department of Corrections & Rehabilitation. It is classified as a subcontract with a NAICS code of 238120, indicating it falls under the structural steel erection industry. The solicitation was posted on July 18, 2026, with a response deadline of August 4, 2026, at 7:00 PM, requiring timely submission from interested parties. The place of performance is located within California, though specific city or zip details are not provided. The contract is not associated with a set-aside designation, meaning it is open to all eligible subcontractors without preferential classification. All proposals must be submitted through the CalEProcure portal via the provided link.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Structural Steel ErectionThe contract involves the fabrication and erection of a structural steel framework for a building project under the California Department of General Services, with performance located in Sacramento. This is a subcontract solicitation with a NAICS code of 238120, specifically targeting work in structural steel fabrication and erection services. The opportunity was posted on July 17, 2026, and responses are due by August 4, 2026, at 7:59 a.m. There is no specified set-aside type or organization type, indicating it is open to eligible subcontractors without restrictions based on size or certification. While no point of contact or detailed address information is provided, the opportunity is accessible via the Cal eProcure platform at the designated link, and potential bidders must ensure compliance with all technical and procedural requirements for submitting a timely and complete response.

California Department of General Services

POSTED

DEADLINE

Structural Steel ErectionThe contract calls for the fabrication and erection of a structural steel framework to support the superstructure of a building, with work performed under NAICS code 238120 for heavy and civil engineering construction. The solicitation is classified as a subcontract and is open for responses until August 21, 2026, with the opportunity posted on July 17, 2026. The project is being managed by Rock Region METRO, an agency based in Arkansas, though no specific location for performance is provided. No set-aside provisions are indicated, and no contracting officer or point of contact information is included. Interested parties must review the full details via the provided online link to ensure compliance with technical and procedural requirements before submitting a bid.

Rock Region METRO

POSTED

DEADLINE

in about 1 month

UIFB #27-INC-038 Two Howitzer Exhibit PlatformsThe Jamestown-Yorktown Foundation, Inc. is soliciting a qualified contractor to design, fabricate, and install two exhibit platforms specifically for howitzer installations at the American Revolution Museum at Yorktown. The contractor must provide all labor, supervision, tools, equipment, materials, fabrication, finishing, transportation, delivery, and installation services required to complete the project. The platforms are critical components of the museum’s exhibit infrastructure and must be constructed to exacting standards to safely and effectively display historic artillery pieces in a public exhibition environment. All work must be performed at the designated location: 200 Water Street, Yorktown, Virginia. The solicitation, identified as UIFB #27-INC-038 with solicitation number QQ-124598, was posted on July 17, 2026, with a firm response deadline of July 27, 2026, at 7:00 PM. The procurement is administered by the Virginia-based agency and falls under a state, local, or education (SLED) organizational type. Proposals must be submitted through the official vendor portal, and all inquiries should be directed to Keola Lee at keola.lee@jyf.virginia.gov or by phone at 757-253-7207. There is no set-aside designation specified for this contract, making it open to all eligible bidders.

Jamestown-Yorktown Foundation

POSTED

DEADLINE

Paving and Asphalt WorkThe contract entails the supply and installation of hot mix asphalt for pathways, parking areas, and access roads, with full responsibility for compaction and coordination of striping activities to ensure proper delineation and safety compliance. All work must be executed to meet technical and quality standards appropriate for public infrastructure, requiring precise project planning and execution to accommodate existing conditions and scheduled usage. The solicitation is categorized as a subcontract under NAICS code 238120, reflecting specialized paving services, and is managed by the Pennsylvania Public Works agency. Responses are due by August 28, 2026, with the project located within Pennsylvania, though specific city or address details are not provided. The contract opportunity is publicly accessible via an online portal linked for further procurement details.

POSTED

DEADLINE

in about 1 month

Structural Steel ErectionThe contract entails the fabrication and erection of a structural steel framework for a tower and associated support buildings at Fort Bragg, North Carolina, with a NAICS code of 238120, indicating it is a subcontract under the metal framing and structural steel work category. The opportunity was posted on July 17, 2026, with a response deadline of July 22, 2026, and is managed by the Department of Defense through its Land Supply Chain organization. Work must be performed on-site at the designated location, with no set-aside provisions specified, leaving it open to any qualified subcontractor. All activities are tied to the federal procurement system via the DIBBS platform, and while point of contact details are not provided, interested parties are directed to the official solicitation link for full participation requirements and submission guidelines.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Structural Steel ErectionThe contract involves the fabrication and erection of a structural steel framework comprising columns, beams, and bracing for a defense-related project under the Department of Defense. It is classified as a subcontract with the NAICS code 238120, indicating it falls under structural steel erection services. The contract was posted on July 17, 2026, and is managed by the Defense Logistics Agency, with the work to be performed at an unspecified location within the United States. The project supports military infrastructure needs, and while no set-aside designation or specific point of contact is provided, the performance location and contractual obligations are tied to the delivery of a fully engineered and installed steel framework to meet defense specifications. The contract reference can be accessed via the DIBBS system using the provided link for further details.

Defense Logistics Agency

POSTED

DEADLINE

Structural Steel ErectionThe contract involves the fabrication and erection of a structural steel framework for a tower and associated support buildings under a subcontract classification. The work is aligned with NAICS code 238120, which pertains to structural steel and metal framework contracting, indicating the scope focuses on the precise assembly and installation of steel components essential to the structural integrity of the facilities. The solicitation was posted on July 17, 2026, with a firm response deadline of August 20, 2026, requiring bidders to submit proposals within this window to be considered. The undertaking is managed by the Facilities Maintenance agency under the jurisdiction of California, though specific city or zip code details for the place of performance are not provided. While no set-aside provisions or office contact information are specified, the project's success hinges on adherence to technical standards for steel fabrication and on-site erection, with all activities to occur at the designated location tied to the California-based facility.

Facilities Maintenance

POSTED

DEADLINE

in about 1 month

Structural Steel Fabrication and ErectionThe contract involves the fabrication and erection of structural steel frameworks for buildings and other facilities under a subcontract arrangement, classified under NAICS code 238120. The work is being managed by the Public Works & Engineering agency in Texas, with performance expected to take place across unspecified locations within the state. Interested parties must submit responses by the deadline of August 13, 2026, at 3:00 PM, following the posting date of July 17, 2026. No set-aside provisions or designated organizational preferences are specified, and no point of contact information is provided within the contract details. All submissions and inquiries should be directed through the official procurement portal linked in the contract information.

Public Works & Engineering

POSTED

DEADLINE

Structural Steel FramingThe contract encompasses the fabrication and erection of pre-engineered metal building systems or structural steel framing for warehouse applications with clear spans, specifically for a project located in Vacaville, California, with a ZIP code of 95688. The work is classified under NAICS code 238120, which pertains to structural steel framing contractors, indicating a focus on the physical assembly and installation of steel components to form the primary load-bearing structure of the facility. This subcontract is tied to a public procurement initiative led by the City of Vacaville, with the solicitation posted on July 17, 2026, signaling an upcoming procurement timeline that will require qualified contractors to meet technical and compliance standards for industrial construction. The project is situated within the state of California and will require adherence to applicable local, state, and federal building codes, safety regulations, and environmental standards. Although specific performance metrics, deadlines, or pricing details are not outlined, the nature of the work indicates a significant construction effort involving heavy lifting, precision engineering, and coordination with other trade partners. The place of performance is fixed in Vacaville, meaning all fabrication and erection activities must be executed on-site or with materials delivered to that location. Subcontractors bidding on this opportunity must have proven experience in metal building systems, demonstrated capacity for large-scale structural installations, and the ability to comply with the regulatory framework governing public infrastructure projects in California.

City of Vacaville

POSTED

DEADLINE

More opportunities from California → Engineering and Program Delivery

Same awarding agency

Quality Control and Testing ServicesThe contract calls for independent testing and inspection of materials, welds, and systems to verify compliance with ASTM standards, the National Electrical Code, and specific project requirements. The scope includes conducting thorough evaluations and submitting complete test data and official certificates as evidence of adherence to these technical and regulatory benchmarks. All work must be performed with precision and documented to support regulatory and project integrity. This is a subcontract under the NAICS code 541350, issued by the Engineering and Program Delivery organization in California, with a bid deadline of September 25, 2026. The services are critical to ensuring the safety, reliability, and compliance of materials and systems used in the associated project, and the contractor is expected to deliver high-quality, verifiable results without relying on internal or self-certified data. Performance location details are not specified, but the work is tied to a larger initiative managed under California’s engineering program delivery framework.

Building Inspection Services

POSTED

DEADLINE

Supply of BEB Charging Equipment and Power Conversion SystemsThe contract involves the supply and integration of battery electric bus charging equipment, including pantograph charging systems, power conversion modules, and software interfaces designed to ensure seamless compatibility and operational efficiency. All components must comply with applicable federal standards to guarantee safety, reliability, and interoperability within public transit infrastructure. The work requires end-to-end delivery, installation, and system integration to support the deployment of electric bus fleets, with a strong emphasis on performance, scalability, and long-term maintenance readiness. The solicitation is issued as a subcontract under the agency name Engineering and Program Delivery, with a response deadline of September 25, 2026. The North American Industry Classification System code 335313 applies, indicating the scope aligns with electrical equipment manufacturing for transportation applications. While the precise location of performance is not specified, the contracting entity is based in California, suggesting the equipment will support transit operations within the state. The project requires vendors to deliver fully integrated solutions with documented compliance, testing protocols, and support mechanisms to meet the operational demands of modern electric bus networks.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Civil Site Work and FoundationsThe contract encompasses comprehensive civil site work and foundations to support charging infrastructure and bus operations at Chaboya Yard, including earthwork, site grading, utility relocations, concrete foundation construction, storm drainage system installation, and paving. All work is focused on preparing the site to accommodate electric vehicle charging systems and related transit operations, ensuring proper drainage, load-bearing surfaces, and integrated utility connections. The scope requires precise coordination of multiple disciplines to meet operational and safety standards for a high-traffic transit facility. This is a subcontract with a NAICS code of 238990, posted on July 15, 2026, and requiring responses by September 25, 2026. The work falls under the jurisdiction of the Engineering and Program Delivery division of California, with performance expected at Chaboya Yard. While specific location details and point of contact information are unspecified, the project is accessible via the provided procurement portal link, and contractors must be prepared to deliver full-site infrastructure capable of supporting modern electric bus operations under strict engineering and timing requirements.

All Other Specialty Trade Contractors

POSTED

DEADLINE

High-Voltage Electrical Installation for ZEB Charging StationsThe contract involves the installation of medium- and high-voltage electrical infrastructure to enable charging operations for zero-emission battery electric buses, focusing on critical components such as switchgear, transformers, conduits, and utility interconnection systems. This work is essential to support the expansion of public transit electrification in California, ensuring reliable power delivery to multiple charging stations across the network. The scope requires compliance with industry standards for high-voltage installations and integration with existing utility grids to maintain operational safety and efficiency. The contract is classified as a subcontract under NAICS code 238210, which corresponds to Electrical Contractors and Other Wiring Installation Contractors. It was posted on July 15, 2026, with a response deadline of September 25, 2026, providing prospective bidders approximately two months to prepare and submit proposals. The work is being managed under the Engineering and Program Delivery division of the California agency, though specific location details and point of contact information are not provided. All performance activities are expected to take place within California, aligning with broader state initiatives to modernize public transportation infrastructure and reduce emissions.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Procurement for Construction Manager/General Contractor (CMGC), CHABOYA YARD ZERO‑EMISSION BUS (ZEB) CHARGING INFRASTRUCTURE PROJECTThe Valley Transportation Authority (VTA) is seeking a qualified California-licensed General Contractor to serve as Construction Manager/General Contractor (CMGC) for the Chaboya Yard Zero-Emission Bus (ZEB) Charging Infrastructure Project, utilizing the CMGC delivery method as authorized under Public Utilities Code section 100150. The initial contract award will cover Preconstruction Services, including project management, close collaboration with the design consultant, constructability reviews, value engineering, risk assessment, and scheduling optimization to advance the design from 65% PS&E toward final plans. The Preconstruction Phase is limited to 240 calendar days from the Notice to Proceed and will be compensated via a negotiated lump sum fixed fee. Successful completion of preconstruction does not guarantee construction work; Stage 1 and Stage 2 construction services, estimated between $15 million and $20 million, are contingent upon VTA’s approval of a Guaranteed Maximum Price (GMP), Board of Directors authorization, and execution of a contract amendment. A mandatory project deliverable is the installation of medium-voltage switchgear no later than December 31, 2028, with overall project completion targeted for Summer 2029. The Contractor must ensure uninterrupted 24/7 operations at the Chaboya Yard throughout construction and demonstrate experience in BEB charging infrastructure, medium/high-voltage electrical systems, steel canopy structures, and CIDH piles, with two proven projects in each of the first two categories and one in the third. Key personnel must be identified by name, with resumes submitted and approval required for any changes. Subcontractors must meet the same experience thresholds and comply with strict flow-down requirements including prohibitions on covered telecommunications equipment from Huawei, ZTE, Hikvision, Dahua, and other entities tied to the Chinese government, as well as adherence to Buy America, nondiscrimination, anti-human trafficking, and lobbying compliance rules. Proposal evaluation is based on a Best Value approach with five equally weighted factors: qualifications, staffing and organization, work plan and project understanding, proposed schedule and effort, and cost proposal. Proposals must be submitted electronically no later than September 25, 2026, as two separate volumes: a Technical Proposal and a Cost Proposal, with standardized forms completed exactly as templated. Performance is required at 2240 S 7th Street, San Jose, CA 95112, with all work subject to VTA inspection and acceptance, which does not relieve

Power and Communication Line and Related Structures Construction

POSTED

DEADLINE