Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

STS Fish Mesh (Bonneville Dam)

Awarded
W9127N26PA048Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled STS Fish Mesh (Bonneville Dam) is a small business set-aside award issued by the Department of Defense through the Office of W071 Endist Portland, with the solicitation number W9127N26PA048. It is classified under the NAICS code 333998 and is exclusively reserved for total small business concerns as defined by the Small Business Administration under FAR 19.5. The work is to be performed at Cascade Locks, Oregon, near Bonneville Dam, and involves the provision of fish mesh equipment critical to environmental and fish passage operations. The award notice was posted on April 30, 2026, and the primary point of contact for inquiries is Consuelo Kiser, reachable via email at consuelo.j.kiser@usace.army.mil or by phone at 7858067187. The contracting office is located at Portland, Oregon, with a ZIP code of 97204-3495, and all official correspondence and performance must align with the specified federal procurement guidelines.

General Info

Small business contract for fish mesh at Bonneville Dam, awarded by DoD, performance in Cascade Locks, Oregon.

Agency

Department Of Defense → W071 Endist PortlandView Agency

Contract Value

$68,225.92

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

Cascade Locks, OR, 97014, USA

Set-Aside

SBA

Awardee

CLEAR EDGE FILTRATION INCView Profile

Award Issued Date

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W071 Endist Portland
Contacts1 person available
OfficePORTLAND, OR, 97204-3495, USA
Organization / Agency
Department Of Defense → W071 Endist Portland
View Agency Profile
Office AddressPORTLAND, OR, 97204-3495, USA

Full Description

Show more
https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=503b301a211940c5bc4f76d6dcc1579c

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
43--SEPARATOR,WATER,LIQUID
Solicitation # SPE7M1-26-T-348Y
Solicitation SPE7M1-26-T-348Y is a request for quotations issued by DLA Land and Maritime for the procurement of 943 units of liquid fuel water separators, identified by NSN 4330014246740 and part number 200257 from M. E. Industries, Inc. This item is designated as a critical application item. The procurement falls under NAICS code 333998 and requires electronic submission of quotes via the DIBBS system by September 21, 2026. Delivery is required within 317 days, with a need ship date of August 5, 2027, and a final required delivery date of August 13, 2027. Shipping is established as FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS requirements for safeguarding covered defense information and the prohibition of hexavalent chromium. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Invoicing and payment processing are to be handled electronically through Wide Area WorkFlow. Offerors are prohibited from using additive manufacturing processes unless specifically authorized. The procurement is managed by the Maritime Supply Chain office in Columbus, Ohio, with Michael Reese serving as the primary buyer.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333998
New
International
Portable Centrifuge Lube Oil Purifiers
Solicitation # W3555-268893
The Department of National Defence is soliciting offers for the procurement of two new portable centrifuge lube oil purifiers to be delivered to Fleet Maintenance Facility Cape Breton in Victoria, BC. These units are specifically required to remove water and particulate from emulsified and salt water contaminated R&O 77 steam turbine lubricating oil. The firm requirement must be received by June 17, 2027, with the overall contract period extending to December 22, 2027. Additionally, Canada maintains irrevocable options to purchase up to two additional units for FMF Cape Breton and up to two additional units for FMF Cape Scott in Halifax within 12 months of the contract award. The contract will be awarded based on the lowest evaluated price among technically compliant offers. Mandatory technical criteria include compliance with the Canadian Electrical Code Part 1, the inclusion of emergency stops, and English labeling for all hazard areas. Delivery is specified as Delivered Duty Paid (DDP), and the contractor must adhere to green procurement policies by using reusable, returnable, or recyclable packaging. Payment for undisputed invoices will be made within 30 days of receipt. There are no security requirements for this contract, but the successful offeror must certify that the work is not produced using forced labour.
Department of National Defence

POSTED

1 day ago

DEADLINE

in about 2 months
View Details

More opportunities from Department Of Defense → W071 Endist Portland

Same awarding agency

NAICS: 333914
New
Federal
LOP Fire Protection and Unwatering Pump System
Solicitation # W9127N26QA155
Solicitation W9127N26QA155 is a total small business set-aside for the procurement of a fire protection and unwatering pump system for the Lookout Point Powerhouse in Lane County, Oregon. Issued by the Department of Defense W071 Endist Portland, this firm-fixed-price requirement is necessitated by a deep reservoir drawdown that would otherwise disable critical service water and fire protection systems. The scope of work includes the delivery of a 650 GPM vertical pump/motor assembly, a 0.25 HP jockey pump system, a fire pump controller panel, overload protection, and various piping and fitting components. All equipment must meet AWWA E103 and HI 9.1-9.5 standards, with a delivery deadline of March 1, 2027, shipped FOB destination to Lowell, Oregon. The government will award a single purchase order based on an evaluation of technical compliance, past performance, and price, utilizing the HUBZone price evaluation preference. Offerors must be registered in the System for Award Management under NAICS code 333914 and submit a complete quote package via email to the designated point of contact. The solicitation underwent two amendments, with the final response deadline extended to September 11, 2026. Key contractual requirements include compliance with MIL-STD-129 for marking, DFARS cybersecurity and telecommunications regulations, and specific pump acceptance criteria according to HI ANSI/HI 14.6 grade 2B.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
Federal
W9127N26QA145 - PH2 BLADE SEALS REPLACEMENT for Bonneville Dam
Solicitation # W9127N26QA145
The US Army Corps of Engineers, Portland District, is soliciting a firm-fixed-price contract for the design, fabrication, and installation of blade seals for the Powerhouse II Main Unit Kaplan turbines at the Bonneville Lock and Dam in Oregon. The primary scope of work involves supplying and installing five one-piece solid seals for Main Unit 16, with an optional second set for Unit 17. The contractor is responsible for providing all supervision, labor, equipment, and materials. The seals must feature redundant sealing edges, be field-molded solid at the site, and be manufactured without the use of adhesives or external bonding materials to ensure geometric continuity and consistent material properties. The government requires expedited fabrication and installation following an anticipated award date of September 30, 2026. Technical deliverables include a PH2 Blade Seal Assembly Drawing in PDF and CADD formats, as well as detailed quality documentation and photographs verifying that the seals meet specified tolerances. Award will be granted to the responsible quoter offering the lowest total evaluated price, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Final acceptance will occur onsite after the government verifies that the installation conforms to all contract requirements. Performance is subject to site safety conditions, project operations, and government-controlled HECP/LOTO clearances.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334513
New
Federal
Lookout Point DGA supply and incidental install
Solicitation # W9127N26QA160
Solicitation W9127N26QA160 is a total small business set-aside for the purchase and installation of three online Dissolved Gas Analysis (DGA) monitoring systems for the main unit generator step-up transformers at the Lookout Point Powerplant in Jacksonville, Oregon. The contract is a firm-fixed-price award under NAICS code 334513, with the government evaluating quotes based on technical compliance, past performance, and price. The scope of work includes the delivery of the DGA monitors, incidental installation, necessary installation supplies, and eight hours of onsite training conducted by a manufacturer-approved instructor. The systems must be capable of measuring total dissolved combustible gas, total hydrocarbon, oil temperature, moisture-in-oil, ambient temperature, and nine specific gases, while supporting Modbus RTU and DNP3 protocols with RS-232, RS-485, and Ethernet interfaces. Key deliverables include a PC-based software package for remote data analysis and operation and maintenance manuals in both hardcopy and PDF formats. The contractor must provide an onsite field engineer or technician to lead installation, functional testing, and system verification, which must be coordinated with the Contracting Officer at least 14 days in advance. All items and services must be delivered FOB destination by March 1, 2027, with shipments restricted to normal business hours from Monday through Thursday. Additionally, the contractor must comply with specific security requirements, including OPSEC Level I and CUI training for personnel, and adhere to DFARS regulations regarding cybersecurity and the prohibition of covered defense telecommunications equipment.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 238220
New
Federal
John Day Dam Powerhouse HVAC Upgrades
Solicitation # W9127N26BA006
The U.S. Army Corps of Engineers Portland District is seeking a single firm-fixed-price contract for comprehensive HVAC upgrades at the John Day Dam Powerhouse, located across Oregon and Washington. The project involves replacing primary and secondary chillers, installing four new chiller skid packages with approximately 600 tons of refrigeration capacity, and implementing a new automated digital HVAC control system. Key technical requirements include a mix of water-cooled and air-cooled systems, new intake and exhaust ducting for fire smoke propagation prevention, and the installation of mini-split units. The work must be performed within an active powerhouse containing high-voltage electrical equipment and areas prone to water intrusion, with a construction period of 1,004 calendar days. The estimated project magnitude is between 25 million and 100 million dollars under NAICS code 238220. A critical condition for award is compliance with Cybersecurity Maturity Model Certification, specifically CMMC Level 2 (Self) for the prime contractor and appropriate levels for subcontractors based on the type of information processed. The solicitation is expected to be issued as an Invitation for Bids in mid-September 2026, requiring bidders to have an active SAM registration and a current NIST SP 800-171 assessment.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

2 days ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS