Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STUD, WELDING

Active
SPE4A6-26-T-05PFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of STUD, WELDING with NSN 5307-00-355-4873 and part number 9000S6202-73980, under solicitation SPE4A6-26-T-05PF, requiring delivery of 10.26 handling units within 64 days to the DLA Distribution Facility in New Cumberland, Pennsylvania. The delivery is FOB origin with no quantity variance permitted, and inspection and acceptance occur at the destination. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date. The material is not subject to shelf life restrictions, and Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i). Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization follows DLA Packaging Requirements. Sampling for quality verification must adhere to MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with zero non-conformances required unless otherwise specified. All items must be marked in accordance with MIL-STD-130N, and measuring and test equipment must be calibrated and controlled as required. The contract references cybersecurity compliance through CMMC Level 2 certification for third-party assessors and includes provisions for the removal of government identification from non-accepted supplies. The primary point of contact is David Williams, and the solicitation response deadline is July 21, 2026, with a required ship date of September 24, 2026.

General Info

Procure 10.26 handling units of weld stud NSN 5307-00-355-4873, deliver FOB origin to New Cumberland by September 24, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05PF.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
David Williams
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STUD,WELDING
STUD WELDING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RT001: MEASURING AND TEST EQUIPMENT
80064 NAVAL SHIPS SYSTEM COMMAND
IDENTIFY TO:
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING "OPEN SOLICITATION ONLY". TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)> FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SPE4A6-26-T-05PF
SECTION B
TDP Rev A Gen 1 IAW BASIC DRAWING NR 53711 73980 REVISION NR G DTD 06/23/1972 PART PIECE NUMBER: 9000S6202-73980SEC1SH2TYPE121
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016286528 0001 HD 10.260
NSN/MATERIAL:5307003554873
DELIVERY (IN DAYS):0064
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BS OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
SPE4A6-26-T-05PF
SECTION B
PR: 7016286528 PRLI: 0001 CONT’D
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:09/24/2026 Original Required Delivery Date:09/24/2026
SPE4A6-26-T-05PF NSN/Part Number: 5307-00-355-4873 Quantity: 10.26 HD Purchase Request: 7016286528QTY: 10 Delivery: 64 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 165 units of a screw, cap, socket head, self-locking, identified by NSN 5305-00-940-9531, under solicitation SPE4A6-26-T-05PC, with a delivery requirement of 146 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and the item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. All units must be physically marked in accordance with MIL-STD-130N for identification, and government identification must be removed from non-accepted supplies. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels or AQLs as specified. Thread dimensions for Class 3A and 3B threads must conform to System 22 of FED-STD-H28/20, excluding small internal and external threads. Cybersecurity compliance requires CMMC Level 2 self-assessment, and third-party assessments must be performed by a certified C3PAO. The solicitation is fully competitive under military specification, with drawings available only during the open solicitation period via the DIBBS portal, and performance is to be delivered to San Diego, CA. The primary point of contact is Lisa Harvie of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Precision Forging and Stamping of Aerospace Ignition SleeveThe contract involves the precision manufacturing and delivery of an ignition sleeve designated by NSN 2920012877383, engineered to meet stringent aerospace standards using high-grade materials produced through forging or stamping processes. The work includes all necessary machining operations, rigorous inspection protocols to ensure dimensional and material integrity, and packaging that complies fully with NSN requirements for military logistics and handling. The product is part of a critical propulsion or ignition system component where reliability and performance under extreme conditions are non-negotiable. Awarded under the Defense Logistics Agency’s procurement framework, this subcontract falls under NAICS code 332722 for forging and stamping operations and is tied to the Department of Defense’s supply chain for defense hardware. Posting occurred on July 13, 2026, indicating an anticipated timeline for execution, with no set-aside provisions specified. The place of performance and point of contact details are not provided, but the contract reference SPE7L526P0342 confirms its official status within the DIBBS system, ensuring traceability and compliance with federal contract regulations applicable to defense contractors.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
STUD, PLAINThe contract involves the procurement of 13 plain studs with NSN 5307-01-345-7222 under solicitation SPE7M2-26-T-5618, issued by the Department of Defense’s Nuclear Reactor Program. Delivery is required within 164 days of award, and responses must be submitted by July 24, 2026. The procurement is governed by the DLA Master List of Technical and Quality Requirements, which incorporates referenced technical and quality standards identified by R or I numbers, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Export control obligations apply due to the presence of technical data subject to ITAR or EAR regulations, and contractors must be approved by DLA to handle such data, requiring JCP certification, completion of DOD export control training, and approval of the DLA questionnaire. Configuration changes require formal Engineering Change Proposals or variance requests, and non-accepted supplies must have all government identification removed prior to return. The place of performance is New Cumberland, PA, 17070-5002, and the primary point of contact is David Larsen at david.larsen@dla.mil.
NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGONThe contract pertains to the procurement of 70 plain hexagonal nuts identified by NSN 5310-01-493-3532 under solicitation SPE4A6-26-T-05PB, with a delivery deadline of 151 days after award. Strict prohibitions are in place against the intentional addition or direct contact of mercury or mercury-containing compounds with the hardware, except for functional uses in specified items such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and equipped with a secondary containment barrier in compliance with NAVSEA 5100-003D. Quality conformance requires a Certificate of Conformance unless waived by a Quality Assurance Letter of Instruction, and Certificate of Quality Compliance documentation applies via CDRLs and DD Form 1423s, with all technical and quality requirements referenced in the DLA Master List. Manufacturers and non-manufacturers must comply with ISO 9001:2015 quality management standards. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, unless otherwise stated in the contract or technical documents. Unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may determine sample size, but acceptance requires zero non-conformances unless waived. Thread inspection for Class 3A and 3B threads must adhere to System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specified diameters. All items must be marked in accordance with MIL-STD-130N for U.S. military property identification, and shipping must comply with DLA packaging requirements. Cybersecurity compliance requires either a CMMC Level 2 certified third-party assessment or a self-assessment, and the contract incorporates requirements for the protection of covered defense information. The nuts are procured fully competitively under a federal specification, with all technical data accessible only during the open solicitation period via the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SELF-DRILLINGThe contract pertains to the procurement of 14 packages of self-drilling screws, identified by NSN 5305-01-572-0554 and McMaster-Carr part number 91632A194, under solicitation SPE4A6-26-T-05NV. Delivery is required within 103 days to the destination in Tracy, California, with FOB origin terms and zero tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, and marking per MIL-STD-129 with no special marking required. Packaging and preservation must be free of mercury or mercury compounds, consistent with the prohibition in IP056, and palletization must conform to DLA packaging requirements. The screws must meet technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and sampling for inspection must follow MIL-STD-1916 or an equivalent zero-based plan, with zero non-conformances required unless otherwise stated. The contract stipulates that no mercury or mercury-containing substances may be intentionally introduced into the product or its packaging, with limited exceptions for specific functional uses such as batteries or sensors, all of which must adhere to NAVSEA 5100-003D containment guidelines. The contract further requires compliance with documentation protocols for source approval, and all materials must be free of government identification if rejected. Inspection and acceptance occur at the delivery destination, with the supplier responsible for meeting all packaging, labeling, and transportation directives as outlined in DLA procedural notes C19 and C20. The unit of issue is packaged (PG), and pricing is fixed at $14.00 per package for a total contract value tied to the 14-package quantity. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026, and the item falls under NAICS code 332722 for screw manufacturing. The point of contact for the procurement is Michael Blain of the ASC Commodities Division, Department of Defense, and all items must be delivered to the specified warehouse address in Tracy, California. The contract enforces strict adherence to quality, packaging, and environmental requirements, with no allowance for unauthorized deviations or substances.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details