Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Sub-Compact Utility Tractor with Front Loader and Turf Tire Package

Active
W911S226U3893Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the procurement of a Kubota BX2380 Sub-Compact Utility Tractor fully equipped with a front-end loader and heavy-duty turf-safe tires, specifically configured for sensitive groundskeeping and landscape maintenance tasks in confined areas where larger equipment would damage manicured surfaces. The tractor must be powered by a liquid-cooled, 3-cylinder diesel engine delivering at least 21.6 gross horsepower, with a Live Independent PTO system offering 540 RPM at the rear and 2500 RPM at the midpoint to support mid-mount mowers, and must provide a minimum of 17.7 PTO horsepower. The drivetrain requires true four-wheel drive with an operator-controlled rear differential lock, a hydrostatic transmission with two forward and two reverse ranges, wet disc brakes, and hydrostatic power steering for precise maneuverability. Hydraulic capabilities include a minimum 6.0 GPM pump flow and a Category I three-point hitch rated for at least 680 lbs. of lift capacity at 24 inches behind the pins. The front loader must be a factory-matched Kubota LA344 or equivalent unit with quick-attach functionality, flat-faced no-spill couplers, and a minimum lift capacity of 613 lbs. at maximum height with a quick-attach bucket or 739 lbs. with a pin-on bucket, achieving a maximum lift height of 70.7 inches for efficient bin unloading. The unit must be fitted with turf-safe tires to prevent soil compaction and turf damage, have a dry weight between 1,430 and 1,445 lbs., and a turning radius of 7.5 feet or less without brake use. Safety features include a folding ROPS, and all equipment must be delivered fully assembled, serviced, with fluids topped off, and ready for immediate operation at the designated FOB destination. This solicitation is a Small Business Set Aside under NAICS code 333111, issued by the Department of Defense’s Office at Fort Drum, NY, with responses due by August 7, 2026.

General Info

Kubota BX2380 tractor with loader, turf-safe tires, 21.6 HP diesel, hydrostatic drive, 6.0 GPM hydraulics, ROPS, delivered ready for use.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

333111 - Farm Machinery and Equipment ManufacturingView NAICS

Place of Performance

Fort Sill, OK, NY, 73503

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Drum
Contacts2 people available
OfficeFORT DRUM, NY, 13602-5220, USA
Organization / Agency
Department Of Defense → W6QM Micc-Ft Drum
View Agency Profile
Office AddressFORT DRUM, NY, 13602-5220, USA
Contacts
Sarah Long
contact@example.gov
Mark Hill
contact@example.gov

Full Description

Show more
Item: Sub-Compact Utility Tractor with Front Loader and Turf Tire Package. Brand Name: Kubota BX2380 Sub-Compact Utility Tractor package configured with a frontend loader (Kubota LA344 or equal) and heavy duty turf-safe tires. Salient Characteristics: Requirement for the procurement of a brand-name-or-equal Kubota BX2380 Sub-Compact Utility Tractor package configured with a front-end loader (Kubota LA344 or equal) and heavy-duty turf-safe tires. This utility tractor is required for groundskeeping and landscape maintenance in tight, confined spaces where standardcompact tractors are too large or heavy, risking structural damage to manicured turf and fields. Salient Characteristics: 1. Engine and Power Specifications: Engine Type: Must be a liquid-cooled, 3-cylinder diesel engine. Engine Output: Minimum 21.6 Gross Horsepower (HP) (rated up to 23.0 Gross HP). Power Take-Off (PTO) System: Must feature a standard Live Independent PTO. Rear PTO Speed: Must feature a 540 RPM speed threshold. Mid PTO Speed: Must feature a 2500 RPM speed threshold (supporting mid-mount mower compatibility). PTO Horsepower: Minimum 17.7 HP at the PTO shaft. 2. Drivetrain and Hydrostatic Transmission: Drivetrain: Must feature true Four-Wheel Drive (4WD / 4x4) with a standard operator-controlled rear differential lock. Transmission Type: Must feature a Hydrostatic Transmission (HST) with a high-low gear shift (minimum of 2 forward / 2 reverse speed ranges). Braking System: Must feature maintenance-free, wet disc brakes. Steering: Must feature hydrostatic power steering. 3. Hydraulic and 3-Point Hitch Capabilities: Hydraulic Pump Output: Must feature a minimum 6.0 Gallons Per Minute (GPM) pump flow capacity. 3-Point Hitch Type: Must feature an SAE Category I rear three-point hitch. Hitch Lift Capacity: Minimum 680 lbs. lift capacity measured 24 inches behind the lift points (pins). 4. Front Loader Attachment Specifications: Loader Integration: Must accept a factory-matched, quick-mount front-end loader. Bucket Style: Loader bucket must support two-lever quick-attach or pin-on configurations. Hydraulic Couplers: Must feature flat-faced, no-spill hydraulic couplers to prevent oil leakage during attachment swaps. Loader Lift Capacity: Minimum 613 lbs. at maximum height (measured at the pivot pin) with a quick-attach bucket. Minimum 739 lbs. with a rigid pin-on bucket. Maximum Lift Height: Minimum 70.7 inches clearance (at the pivot pin) to support unloading into utility bins. 5. Safety, Tires, and Dimensional Constraints: Operator Safety: Must include a standard, folding Roll-Over Protective Structure (ROPS). Tire Package: Must be equipped with heavy-duty, low-impact Turf Tires to prevent turf destruction. Standard agricultural or industrial tires are not acceptable. Weight Profile: Tractor dry weight (with ROPS, excluding loader attachment) must fall strictly within 1,430 to 1,445 lbs. to prevent field compaction. Turning Radius: Turning radius must be 7.5 feet or less (without brakes applied) to navigate restricted environments. Delivery Destination: FOB Destination. Assembly: Equipment must be delivered fully assembled, serviced, fluids topped off, and ready for immediate operation upon receipt.

Similar Contracts

Same NAICS industry code

NAICS: 333111
New
Federal
Cattle Squeeze Chute
Solicitation # 1232SA26Q1096
This solicitation, numbered 1232SA26Q1096, is a combined synopsis and request for quotation for a Cattle Squeeze Chute under FAR Part 12, issued by the USDA Agricultural Research Service. It is an unrestricted requirement open to all responsible sources, with no small business set-aside, and the applicable NAICS code is 333111, with a small business size standard of 1,250 employees. Vendors must be currently registered in SAM.gov at the time of quotation submission and award, and all responses must be submitted electronically via email to lynn.hults@usda.gov by 4:00 p.m. Central Standard Time on Friday, August 7, 2026. Hard copies and faxed submissions are not accepted. Responses must include not only compliance with the technical specifications but also a detailed description of the vendor’s capability, relevant experience supplying similar equipment to government or other organizations, and a clear past performance history; submissions that merely affirm compliance without additional supporting information will be disqualified. The requirement does not include any parachute add-ons or on-site training, flight safety briefings, or technical onboarding, as standard manufacturer documentation and remote technical support are deemed sufficient. Any future need for supplemental training or on-site services will be addressed through a separate procurement. The place of performance is in Pullman, Washington, with the contracting office located in Beltsville, Maryland. All questions regarding the solicitation must be submitted no later than 3:00 p.m. Central Standard Time on Tuesday, August 4, 2026. Payment will be processed through the Department of the Treasury’s Invoice Processing Platform, and vendors are expected to maintain active SAM.gov registration throughout the award process.
USDA Ars Afm Apd

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333111
New
Federal
Supply of Rideable Cabin Mower (Commercial Groundskeeping Equipment)The contract entails the procurement and delivery of a single rideable cabin mower, specifically a Toro model or an equivalent, featuring a fully enclosed, all-weather climate-controlled cab to ensure operator comfort and safety in varying environmental conditions. The equipment must be certified with CE marking and fully compliant with all applicable European Union emissions and noise standards, ensuring environmental and regulatory adherence for use at Aviano Air Base in Italy. This commercial groundskeeping equipment is intended for routine maintenance operations on military grounds and must meet the stringent operational and safety requirements demanded by the U.S. Department of Defense. The opportunity is designated as a subcontract under NAICS code 333111, with a response deadline set for August 28, 2026, and the solicitation was posted on July 29, 2026. The contracting activity is managed by FA5682 31 Cons (unit 6102), directly under the Department of Defense, and the sole place of performance is Aviano, Italy. There is no specific set-aside designation indicated, meaning the contract is open to all eligible contractors capable of fulfilling the technical and logistical requirements. The equipment delivery must be aligned with the operational needs of the base, ensuring minimal disruption and full compatibility with existing maintenance protocols.
FA5682 31 Cons (unit 6102)

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 333111
New
SLED
Custom Research Plot Sprayer Design and FabricationMississippi State University is seeking a subcontractor to design, engineer, and fabricate a custom agricultural sprayer system tailored for research applications, with compatibility for sub-compact tractors and adaptability to high tunnel environments and wide-row crop configurations. The system must be precision-engineered to meet specific research needs, ensuring accurate application of liquids while maintaining maneuverability in tight spaces and diverse field layouts. The contract is classified under NAICS code 333111, indicating a focus on agricultural machinery manufacturing, and is posted with a response deadline of August 11, 2026, following a July 28, 2026, release date. The project requires full-scale development from concept through fabrication, with an emphasis on durability, ease of integration with existing equipment, and scalability for variable crop conditions. No set-aside provisions are specified, and performance is expected to align with the university’s research objectives in precision agriculture and field experimentation.
MISSISSIPPI STATE UNIVERSITY

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 333111
New
SLED
SOLE SOURCE REQUEST TO PURCHASE Custom-built research plot sprayer manufactured by R&D Sprayers, designed for attachment to a sub-compact tractor. The unit includes multi-tank/bottle configurations, adjustable boom systems, and precision application compo
Solicitation # 9250-27-R-RFIN-00006
Mississippi State University is seeking to procure a custom-built research plot sprayer manufactured exclusively by R&D Sprayers, designed specifically for attachment to a sub-compact tractor. The equipment features multi-tank and multi-bottle configurations, an adjustable boom system, and precision application components to support controlled agricultural research. This solicitation is issued as a sole source request due to the specialized and proprietary nature of the design, which meets unique research requirements not available through other manufacturers. The solicitation number is 9250-27-R-RFIN-00006, posted on July 28, 2026, with a response deadline of August 11, 2026. The procurement falls under NAICS code 333111 and is categorized under SLED government type. All responses must be directed to the primary point of contact, Debra Raines, at draines@procurement.msstate.edu, and the place of performance is located within Mississippi.
MISSISSIPPI STATE UNIVERSITY

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 333111
New
Federal
Supply of Zero-Turn Mowers (Brand or Equal)The contract calls for the procurement and delivery of three commercial-grade zero-turn mowers, specifically the STIHL RZ 752 K or an approved equivalent model, to be delivered to New Bern, North Carolina, within 30 days of contract award. The requirement is structured as a small business set-aside under the SBA program, emphasizing support for small businesses in fulfilling the order. The North American Industry Classification System code 333111 identifies the work as manufacturing agricultural, construction, and mining machinery, underscoring the technical and industrial nature of the equipment involved. Responses are due by August 5, 2026, and the solicitation is issued under the U.S. Department of Agriculture, specifically by the CSA East 3 office. Delivery must meet commercial-grade standards and comply with the specified location and timeline, with no alternative shipping or performance addresses accepted.
Csa East 3 Usda-Fs

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 333111
New
Federal
Commercial Rotary Mower Supply (John Deere 1580 TerrainCut™ or Equal)The contract seeks the supply of one new commercial front-mount rotary mower, specifically the John Deere 1580 TerrainCut™ or an approved equal model, to meet technical specifications required for operation at Aviano Air Base in Italy. The equipment must comply with all performance, durability, and safety standards applicable to military-grade grounds maintenance equipment, ensuring reliability under demanding operational conditions. Delivery is mandated to the designated location, with no flexibility in the place of performance aside from the specified FPO address. The contract is classified as a subcontract under NAICS code 333111, indicating it falls within the construction machinery manufacturing sector. The solicitation was posted on July 27, 2026, with responses due by August 11, 2026, at 2:00 PM local time. The agency responsible is the Department of Defense, specifically under the FA5682 31 Cons (unit 6102) organization. The procurement does not specify a set-aside classification, and no point of contact details are provided, leaving potential offerors to rely on the official UI link for further instructions and documentation.
FA5682 31 Cons (unit 6102)

POSTED

4 days ago

DEADLINE

in 11 days
View Details
NAICS: 333111
New
Federal
BACKHOE
Solicitation # W911S226U3834
The contract calls for a backhoe equipped with a diesel engine matching Model FPT F5HFL463A*W, featuring a 4-cylinder, 4-stroke, turbocharged design with a displacement of 3.4 liters and direct high-pressure common rail fuel injection. The engine delivers a gross horsepower of 74 at 2200 RPM, with net outputs of 72 and 68 hp under different configurations, and maximum torque of 233 lb-ft at 1400 RPM. It operates with a rated speed of 2200 RPM and idle ranges from 900 to 2430 RPM. The drivetrain includes a standard 4-forward and 4-reverse power shuttle synchromesh transmission with fully synchronized gears, delivering travel speeds up to 21.1 mph forward and 14.8 mph reverse depending on gear and tire size, with specified reductions via planetary hubs and differentials. Hydraulic foot-operated disc brakes provide service stopping power, while a mechanically actuated parking brake is mounted on the rear axle input shaft. Electrical systems run on a 12-volt negative ground setup with a 120-amp alternator and an 800 cold-cranking amp battery, supporting 10-amp total power plugs. The operator environment includes a ROPS/FOPS-certified protective canopy, rear fender extensions, a convex rearview mirror, and a mechanical suspension seat capable of 180-degree swivel. The equipment must be serviceable by the manufacturer within a 50-mile radius of Fort Bragg, NC. The solicitation, numbered W911S226U3834, is a total small business set-aside under NAICS code 333111, issued by the Department of Defense through the Office at Fort Drum, NY, with bids due by August 3, 2026, and a primary point of contact listed as Dalvin Autry.
W6QM Micc-Ft Drum

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 333111
New
International
Agricultural Tractor, Kejimkujik National Park
Solicitation # 5P300-26-0093/A
The Parks Canada Agency is seeking to procure one agricultural tractor along with ancillary items and integrated logistic support, including training, for use at Kejimkujik National Park in Nova Scotia, under solicitation number 5P300-26-0093/A. This procurement is restricted to suppliers who already hold an active Supply Arrangement under RFSA E60HS-18AGTR/A, and interested parties must ensure they meet this pre-qualification requirement before submitting a bid. The solicitation was posted on Canadabuys.canada.ca on July 27, 2026, with a response deadline of August 12, 2026, and the required delivery date for the equipment is March 31, 2027. All bids must be submitted through the official procurement portal, and the sole point of contact for inquiries is Normand Breton, the Contracting Authority, reachable by phone or email. Bidders who are unsuccessful in the competition may request a debriefing within fifteen working days of being notified of their bid outcome, with options to receive feedback in writing, via telephone, or in person. The procurement process adheres to federal guidelines and is conducted under the Government of Canada’s open procurement framework. The place of performance is clearly identified as Kejimkujik National Park in Nova Scotia, and while no specific set-aside provisions are indicated, the requirement is targeted exclusively at suppliers with the appropriate prior contractual standing. The entire process is transparent and publicly accessible through the Canadabuys platform.
Parks Canada Agency

POSTED

4 days ago

DEADLINE

in 12 days
View Details
NAICS: 333111
New
Federal
2420--688-26-3-499-0014 | KUBOTA VEHICLES | (VA-26-00079831) (VA-26-00079831)
Solicitation # 36C24526Q0644
The U.S. Department of Veterans Affairs, through Network Contracting Office 5, is soliciting quotations for three Kubota RTVX2C-SKLH-1 X-Cab Utility Vehicles and associated accessories under a service-disabled veteran-owned small business (SDVOSB) set-aside. The procurement, identified by NAICS code 333111 and PSC 2420, is designed to replace aging ground utility vehicles at the Washington DC VA Medical Center that have exceeded their operational lifecycle and suffer from declining parts availability. Each vehicle must be factory-equipped with an enclosed cab featuring HVAC, a 24.8 HP diesel engine, hydrostatic transmission, 4WD with locking differentials, wet-disk brakes, independent suspension, heavy-duty tires on steel rims, a hydraulic dump bed with spray-on liner, and full ROPS/OPS compliance certified to SAE J2194 and OSHA 1928 standards. Required accessories include LED front and rear work lights, turn signal/hazard kits, side mirrors, and a backup alarm, all of which must be professionally installed. Vehicles must meet EPA emission standards, be painted orange, include standard front and rear 2-inch hitch receivers, and come with full manufacturer documentation including operator and service manuals, warranty papers, and pre-delivery inspection reports. All offers must be submitted by August 5, 2026, at 1:00 PM ET to Alison Klein at alison.klein@va.gov and must include vehicle specifications, product brochures, proof of authorized distribution, country of origin, delivery terms, pricing, and past performance. Quotes must affirm acceptance of all solicitation terms or clearly identify any exceptions with rationale. Delivery is required within 90 days of order receipt to 50 Irving Street NW, Washington, DC 20422. Evaluation will be based on technical compliance, delivery capability, price, and past performance under the Simplified Acquisition Procedures of FAR Part 12. Contractors must be current in SAM.gov registrations, comply with all applicable federal clauses including Buy American, whistleblower protections, trafficking in persons, equal opportunity, and sustainable procurement requirements, and adhere to VA campus safety and security protocols during delivery. The contract will be awarded based on the offer most advantageous to the government, considering all evaluation factors without formal negotiations.
245-NETWORK Contract Office 5 (36C245)

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 333111
New
Federal
Supply of Commercial Salt Spreader (BOSS FORGE VAX 2.0)The contract mandates the procurement and delivery of a BOSS FORGE VAX 2.0 salt or ice spreader system specifically designed for integration with a 2012 Chevrolet 3500 truck, requiring full compliance with technical specifications for seamless operation. The equipment must either be a commercial off-the-shelf unit or a functionally equivalent alternative that matches or exceeds performance standards, ensuring reliability and durability in winter maintenance operations. All deliverables must be ready for immediate installation and field deployment without requiring custom modifications. This is a total small business set-aside subcontract under SBA guidelines, restricted to qualified small businesses as defined by NAICS code 333111, which pertains to the manufacturing of agricultural, construction, and mining machinery. The opportunity was posted on July 24, 2026, with a strict response deadline of August 7, 2026, at 6:00 PM. Performance will occur at a location identified by zip code 24910, and the contracting entity is the Department of Justice, operating under the Fpc Alderson office, with no further point of contact provided in the data.
Fpc Alderson

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 333111
New
Federal
Supply of Commercial Snow Plow (BOSS 9'2" Power-V DXT Poly)The contract calls for the procurement and delivery of a new BOSS 9’2” Power-V DXT Poly snow plow system specifically designed to be compatible with a Chevrolet 3500 truck, ensuring full adherence to mandatory technical specifications and offering the equipment at a fair market price. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and the North American Industry Classification System code 333111 applies to the manufacturing of agricultural, construction, and mining machinery. The solicitation, posted on July 24, 2026, requires all proposals to be submitted by August 7, 2026, and the performance location is designated with a zip code of 24910, indicating the system must be delivered to that specific site under the Department of Justice, managed by Fpc Alderson.
Fpc Alderson

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 333111
New
Federal
Generator Supply & Installation (CARB-Compliant)The contract calls for the supply and installation of a 5300W generator that meets California Air Resources Board (CARB) compliance standards, designed to be a Honda-equivalent unit integrated directly into a vehicle’s existing power system for emergency operational use. The generator must be fully compatible with the vehicle’s electrical architecture to ensure seamless power delivery during critical scenarios, with emphasis on reliability, emissions compliance, and minimal environmental impact. Installation must be performed to industry-standard protocols to maintain vehicle warranties and operational integrity. This subcontract is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required at Stennis Space Center, Mississippi, 39529. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026, at 7:00 PM Eastern Time. The North American Industry Classification System code 333111 indicates the scope falls under generator manufacturing and related equipment production. The contract is not subject to any specific set-aside designation, and while no point of contact is provided, all submissions must adhere to the terms outlined in the SAM.gov posting.
NASA Shared Services Center

POSTED

7 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

NAICS: 327212
New
Federal
Long Range Spotting Scopes
Solicitation # W911S226U3865
The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting bids for Long Range Spotting Scopes under solicitation number W911S226U3865, with a deadline for responses set for August 6, 2026 at 6:30 p.m. Eastern Time. This is a combined contract action designated as a Small Business Set Aside with total set-aside status under NAICS code 327212, meaning only small business concerns are eligible to compete. The contract is intended for procurement of optical equipment designed for extended range target identification and observation, likely supporting military training and operational requirements. Performance will occur in the 31905 zip code area, though the specific location is not detailed beyond the postal code. The primary point of contact for inquiries is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or by phone at 520-693-6006. The contracting office is headquartered at Fort Drum, New York, 13602-5220. Prospective bidders must respond through the SAM.gov platform using the provided UI link. The solicitation is open exclusively to small businesses, emphasizing the Department of Defense’s commitment to fostering small business participation in defense supply chains. All offers must be submitted prior to the stated deadline to be considered for award.
Other Pressed and Blown Glass and Glassware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333241
New
Federal
Pot and Pan Washer, Pulper Waste System, and two Ice machines and 1 Ice Bin with filter.
Solicitation # W911S226U3775
The contract solicitation W911S26U3775 seeks the procurement of a Pot and Pan Washer, a Pulper Waste System, two Ice Machines, and one Ice Bin with a filter, all classified under NAICS code 333241 for commercial cooking equipment manufacturing. This is a Small Business Set Aside, meaning only small businesses are eligible to respond, and the opportunity is fully reserved for such entities. The solicitation was posted on July 30, 2026, with a firm response deadline of August 6, 2026, at 11:30 PM Eastern Time. The awarding agency is the Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a place of performance designated for ZIP code 79906. Primary point of contact is Jerry Mata, reachable at 915-569-1749 or jerry.a.mata.civ@health.mil, with Vernette Brown listed as secondary contact at 915-742-0184 or Vernette.m.Brown.civ@health.mil. The solicitation is a combined action and can be viewed through the SAM.gov workspace link provided.
Food Product Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 326211
New
Federal
Tire Machines
Solicitation # W911S226U3752
The contract entails the procurement of three tire machines, including one large heavy-duty tire machine, one smaller tire machine, and one tire balancer, along with all necessary hardware for installation and comprehensive training for personnel. The requirement is designated as a Small Business Set Aside under the NAICS code 326211, indicating it is reserved exclusively for small businesses. The solicitation number is W911S26U3752, with a posted date of July 30, 2026, and a response deadline of August 6, 2026, at 3:55 a.m. The contracting office is the Department of Defense, specifically the W6QM Micc-Ft Drum located in Fort Drum, New York, and the place of performance is listed with a zip code of 22211. Primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or by phone at 7036140476, and additional details can be accessed through the official SAM.gov listing.
Tire Manufacturing (except Retreading)

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334310
New
Federal
High Speed Camera
Solicitation # W911S226U3890
The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting proposals for a High Speed Camera under a Small Business Set Aside, total, as indicated by NAICS code 334310, which classifies the procurement within the Imaging and Photographic Equipment Manufacturing category. The solicitation, identified by number W911S226U3890, was posted on July 30, 2026, with a firm response deadline of August 6, 2026, at 6:35 PM Eastern Time. Proposals must be submitted by this date to be considered, and the contract is structured as a combined solicitation, meaning it may integrate acquisition approaches for both supply and service requirements. The primary point of contact for inquiries is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or by phone at 5206936006, and the official office is located at Fort Drum, New York, 13602-5220. While the place of performance is listed with a ZIP code of 31905, the specific location details are not fully defined in the data, suggesting potential flexibility or further clarification in the full solicitation documents. This opportunity is restricted exclusively to small businesses as part of a federal set-aside program designed to promote small business participation in defense contracting.
Audio and Video Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
Federal
NOSE LANDING GEAR SHOCK STRUT ASSEMBLY
Solicitation # W911S226U3885
The contract is for the procurement of a nose landing gear shock strut assembly under solicitation number W911S226U3885, issued by the Department of Defense through the Office of W6QM Micc-Ft Drum in Fort Drum, New York. It is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 336413 identifies it under aircraft landing gear and wheel manufacturing. The solicitation was posted on July 30, 2026, with a firm response deadline of August 6, 2026, at 4:10 PM Eastern Time, and the type is listed as combined, indicating it may include both a request for proposal and other procurement elements. The place of performance is listed with a zip code of 85365, suggesting delivery or fulfillment may occur in Arizona, though no specific city is provided. The primary point of contact is Frank Timke, reachable via email and phone, and further details can be accessed through the SAM.gov workspace link provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333517
New
Federal
UV Laser Engraver
Solicitation # W911S226U3833
The U.S. Army’s Office of W6QM Micc-Ft Drum is seeking proposals for a UV Laser Engraver under solicitation number W911S226U3833, with a combined solicitation type and a Small Business Set Aside designation for total small business participation. The opportunity is classified under NAICS code 333517, which pertains to industrial laser equipment manufacturing, and is open exclusively to small businesses as defined by the Small Business Administration. The solicitation was posted on July 30, 2026, and all responses must be submitted by 6:20 PM Eastern Time on August 6, 2026. The primary point of contact is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or phone at 520-693-6006, with the contracting office located at Fort Drum, New York, 13602-5220. While the official place of performance is listed with a zip code of 31905, specific location details for delivery or installation have not been provided. Interested parties must navigate the official SAM.gov portal using the provided link to access full documentation and submit proposals.
Machine Tool Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
Federal
Military Frame Jacks and Adapter Sets
Solicitation # W911S226U3892
The contract solicitation for Military Frame Jacks and Adapter Sets, issued under solicitation number W911S226U3892, seeks small business suppliers to provide specialized equipment designed for lifting and supporting military vehicles using frame jacks coupled with bumper adapter kits. This combined solicitation is set aside entirely for small businesses under the SBA program, with the NAICS code 333998 indicating it falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The U.S. Army’s Office at Fort Drum, New York, is the contracting activity under the Department of Defense, and the point of contact for inquiries is Troy Boardman, reachable via phone or email. Proposals must be submitted by the deadline of August 6, 2026, at 4:00 PM EDT, and while the office is located in Fort Drum, the place of performance is designated to zip code 54656, suggesting delivery or installation may occur at a specific military facility in Wisconsin. All responses must meet technical and compliance requirements for military-grade durability, compatibility, and safety standards to support vehicle maintenance operations in field and garrison environments.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336999
New
Federal
Utility Vehicle
Solicitation # W911S226U3879
The contract is for a utility vehicle with a 352cc liquid-cooled EFI engine delivering 25.5 HP, featuring a selectable 2WD or 4WD drive system with front and rear locking differentials, and a CVT transmission offering High, Low, Neutral, and Reverse modes. The vehicle includes a steel dump bed with a 330 lb cargo capacity, seating for two, independent double A-arm suspension front and rear, hydraulic disc brakes on all wheels, 11 inches of ground clearance, and a top speed of up to 36 mph. It requires diesel fuel and has a towing capacity of 1,000 lb. The vehicle must be manufactured in the USA and is offered in configurations with and without doors. The solicitation number is W911S226U3879, posted on July 30, 2026, with a response deadline of August 6, 2026, and is designated as a Small Business Set Aside. The NAICS code has been amended to 336999, and the contracting office is the Department of Defense at Fort Drum, New York, with Suzanne Greenway as the primary point of contact.
All Other Transportation Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333992
New
Federal
Welder/Generator
Solicitation # W911S226U3888
The contract titled Welder/Generator under solicitation number W911S226U3888 is a combined solicitation issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside with full set-aside status, meaning only small businesses are eligible to compete for this opportunity. The North American Industry Classification System code 333992 identifies the scope as related to other fabrication and industrial manufacturing machinery, specifically indicating the need for welding and generator equipment. Proposals must be submitted by August 6, 2026, at 5:00 PM Eastern Time, with the solicitation posted on July 30, 2026. The place of performance is listed with a zip code of 42223, though the specific city and state are not provided. Henry Ingram serves as the primary point of contact, reachable via phone at 270-798-2649 or email at henry.l.ingram4.civ@army.mil for procurement inquiries related to the welding and generator machines required under this contract.
Welding and Soldering Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339920
New
Federal
Force Plates
Solicitation # W911S226U3896
The contract titled Force Plates, identified by solicitation number W911S226U3896, is a combined solicitation issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. It is designated as a Small Business Set Aside under NAICS code 339920, meaning only small businesses are eligible to compete for this opportunity. The contract requires the supply of force plates, likely for use in military performance testing, biomechanical analysis, or training equipment, with performance to occur at Fort Drum, NY. The solicitation was posted on July 30, 2026, and proposals must be submitted no later than 8:00 PM EDT on August 6, 2026. Patrick Sandora serves as the primary point of contact for any inquiries related to the solicitation, reachable by phone at 315-774-0977 or via email at patrick.a.sandora.civ@army.mil. Bidders must ensure compliance with all federal acquisition regulations and small business eligibility requirements as defined by the Small Business Administration. The contract is accessible online through the SAM.gov portal, and successful offerors will be expected to deliver force plates meeting specified technical and quality standards in a timely manner to support operational needs at Fort Drum.
Sporting and Athletic Goods Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 238910
New
Federal
Demo WWII Buildings and Restore Grounds on Fort Drum, NY
Solicitation # W911S226QA081
The contract solicitation for the demolition of WWII-era buildings and restoration of grounds at Fort Drum, New York, is a full small business set-aside under NAICS code 238910 with a size standard of $19 million, targeting qualified small contractors. All proposals must be submitted electronically via the PIEE Solicitation Module, with a designated Proposal Manager responsible for submitting the quote. The site visit is scheduled for July 23, 2026, at 1:00 PM Eastern Time in Conference Room 103 at 4205 Po Valley Rd, and interested parties must notify the Contracting Officer by 10:00 AM that same day to gain access, which requires registration at the Paul Cerjan Gate or the Welcome Center with Real ID-compliant identification and proof of insurance. Questions are due by July 27, 2026, and the final quote submission deadline has been extended to August 7, 2026, at 10:00 AM Eastern Time. Amendments have been made to include Attachment 5, which confirms that the 2011 asbestos survey and subsequent follow-ups satisfy New York State Code Rule 56, eliminating the need for further pre-demolition asbestos surveys. Additional updates include revised Performance Work Statement sections, updated 500 Area Drawings with fencing requirements, and the addition of Attachment 4 containing environmental test results. Access to the installation is strictly controlled, and all offerors must comply with Department of Defense entry protocols.
Site Preparation Contractors

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339994
New
Federal
Floor Scrubbers
Solicitation # W911S226U3895
The contract titled Floor Scrubbers is a Small Business Set Aside solicitation issued by the Department of Defense under the office of W6QM Micc-Ft Drum, with the solicitation number W911S26U3895. It was posted on July 30, 2026, and bids must be submitted by August 6, 2026, at 4:10 PM Eastern Time. The North American Industry Classification System code 339994 identifies this as an order for other miscellaneous manufacturing, specifically targeting floor scrubbers, with performance expected at a location with a ZIP code of 54656. The procurement is exclusively reserved for small businesses as defined by the Small Business Administration, ensuring only eligible small entities may respond. Point of contact for inquiries is Troy Boardman, reachable at 502-898-0312 or troy.a.boardman.civ@army.mil, and the opportunity can be viewed online through the SAM.gov platform.
Broom, Brush, and Mop Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details