Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from California was posted on May 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Subcontractor Equipment and Fleet Compliance (CARB)

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The contract requires the provision of off-road diesel construction equipment including excavators, loaders, and graders that comply with California Air Resources Board regulations and meet Tier 4 Final emissions standards. All equipment must be certified as CARB-compliant and suitable for use in construction operations within California, with performance and emissions criteria strictly enforced to ensure environmental standards are met. The equipment is to be delivered and made available for use at the designated place of performance in San Bernardino, California, under the 92415 zip code. Subcontractors must respond to this solicitation by the deadline of June 11, 2026, at 6:00 PM, with proposals submitted through the specified external portal linked to the San Bernardino County procurement system. The contract falls under NAICS code 238910 for other heavy and civil engineering construction specialty trade contractors, indicating the scope focuses on supporting infrastructure and construction projects through compliant equipment supply. There is no set-aside designation, and the contracting entity is identified as the California Administration, with no further organizational or point of contact details provided beyond the agency name and location requirements.

General Info

Provision of Tier 4 final off-road diesel construction equipment for California construction projects.

Agency

California → AdministrationView Agency

NAICS

238910 - Site Preparation ContractorsView NAICS

Place of Performance

San Bernardino, CA, 92415, USA

Set-Aside

NONE

Documents

This scope was carved out of SPD126-SPDAD-6398.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CSA 20 Joshua Tree - Phase II Desert View Conservation Area Recreational Trails Project

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyCalifornia → Administration
ContactsNo contacts available
OfficeN/A
Organization / Agency
California → Administration
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provision of CARB-compliant off-road diesel construction equipment such as excavators, loaders, and graders meeting Tier 4 final emissions standards.

More opportunities from California → Administration

Same awarding agency

New
SLED
Wildland Firefighting Helitanker Station_REBID
Solicitation # SPD127-SPDAD-6486
Project No. 1378.0185 is a rebid solicitation by the San Bernardino County Department of Public Works Special Districts for the construction of a Wildland Firefighting Helitanker Station located at Glen Helen Road and Forest Lane in San Bernardino, California. The scope of work requires the contractor to provide all labor, materials, and equipment to install a permanent open-top metal aerial refilling cistern with a capacity between 3,000 and 8,000 gallons, featuring an automated refill time of 6 to 10 minutes and a flow rate of 800 GPM. Key technical requirements include a dechlorination system treating 175 to 250 GPM, a redundant solar-powered system with dual batteries and panels, RF remote activation, and a solar-powered wind identification system. The project also involves installing 6-inch AWWA C900 PVC service lines with a minimum Class 150 rating, backflow prevention, and perimeter fencing. The contract will be awarded to the lowest responsive and responsible bidder who can demonstrate the completion of at least three projects of similar size and scope within the last five years. Performance and labor and material bonds are required at 100% of the contract sum, and a new bid bond must be submitted for this rebid. The period of performance is 180 calendar days from the Notice to Proceed, with a baseline project schedule due within 14 days of commencement. All work must comply with California General Prevailing Wage Determinations and ADA standards. The bid submission deadline was extended via Addendum No. 5 to September 14, 2026, with submissions accepted through the ePro portal or via sealed hard copy.

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 237990
SLED
Prado Regional Park Drilling Irrigation Well Project
Solicitation # 30.30.0200
The Prado Regional Park Drilling Irrigation Well Project (Project No. 30.30.0200) is a construction contract issued by San Bernardino County for the drilling, installation, development, testing, and disinfection of a new non-potable irrigation well located at 16700 Euclid Avenue, Chino, California. The primary objective of the well is to provide water for park landscape irrigation and to replenish the park lake for recreational use. The scope of work includes drilling a 300-foot well, installing conductor casing, screens, and gravel packs, performing geophysical and aquifer zone testing, and managing a temporary 1.9 million gallon percolation pond for wastewater discharge. The project must adhere to strict technical standards, including DWR Bulletins 74-81 and 74-90, ASTM, and API specifications. The contract will be awarded to the lowest responsible bidder who holds a California Class A or C Contractor’s License and can demonstrate the completion of at least three similar projects within the last five years. Bidders were required to attend a mandatory pre-bid meeting on September 15, 2026, with a final response deadline of October 8, 2026. The total contract value is capped at 1,000,000 dollars. Key compliance requirements include the provision of performance and payment bonds equal to 100 percent of the contract sum, adherence to California Department of Industrial Relations prevailing wage rates, and compliance with the Americans with Disabilities Act. Payment is processed via monthly applications for payment, subject to the submission of certified payrolls and unconditional waiver and release of rights.
Other Heavy and Civil Engineering Construction

POSTED

8 days ago

DEADLINE

in 26 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS