Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Supplier of Restricted Components (e.g., Mercury-Containing Items)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of specialized components containing mercury, such as sensors and batteries, required to meet the strict containment standards outlined in NAVSEA 5100-003D. These components are critical for defense-related applications and must be manufactured, packaged, and handled in full compliance with environmental and safety protocols designed to prevent mercury release during transit, storage, or installation. Subcontractors must demonstrate proven expertise in handling restricted materials and provide documentation verifying adherence to the specified containment requirements throughout the supply chain. The solicitation is classified as a subcontract under NAICS code 335999, issued by the Department of Defense under the organization Construction & Equipment Manu & Con. The opportunity was posted on July 28, 2026, with a response deadline of August 4, 2026, leaving a seven-day window for qualified suppliers to submit proposals. While no set-aside designation or point of contact is provided, potential bidders are directed to the DIBBS portal via the provided link to access full tender details and ensure submission prior to the deadline. All offerings must be traceable, labeled appropriately, and accompanied by certification of compliance with federal and military mercury handling regulations.

General Info

Supply of mercury-containing defense components per NAVSEA 5100-003D, with strict handling and compliance requirements.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of specialized components containing mercury (e.g., sensors, batteries) with compliance to NAVSEA 5100-003D containment standards.

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Shielding Gasket Supply – Electromagnetic Interference (EMI) Shielding ComponentsThe contract seeks the supply of one unit of an EMI shielding gasket, identified by NSN 5999016880111, a commercial off-the-shelf component critical for maintaining electromagnetic compatibility in defense electronics systems. This item is intended for use in sensitive military applications where interference mitigation is essential for operational integrity and performance. The solicitation is issued as a subcontract under the Department of Defense, specifically managed by the MARITIME SUPPLY CHAIN ESOC BUYS, with the place of performance designated as Tobyhanna, Pennsylvania, 18466-5050. The North American Industry Classification System code 335999 applies, reflecting its classification within miscellaneous electrical equipment and component manufacturing. The opportunity was posted on July 28, 2026, and responses must be submitted no later than August 10, 2026. The contract is publicly accessible via the DIBBS platform, though no specific point of contact or set-aside preferences are detailed. As a COTS item, the gasket must meet exacting military specifications for shielding effectiveness, durability, and environmental resilience despite its commercial origin, ensuring seamless integration into defense platforms without requiring custom modifications. The procurement underscores the ongoing demand for standardized, high-performance EMI solutions within the U.S. defense infrastructure.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL COThe contract specifies the procurement of electrical brush contacts under part number 8037-169 by CEF Industries Inc., identified by CAGE code 00268, with the NSN 5977-01-095-5357. The brush grade must be CEF Grade 4430 and no substitutions are permitted; each brush must be individually marked with the manufacturer’s brush grade. The item is to be delivered in single-unit packaging conforming to MIL-STD-2073-1E, with marking compliant with MIL-STD-129 and palletization following DLA packaging requirements. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical attributes are subject to the strictest verification levels. The total quantity ordered is six units at a unit price of $6.00, totaling $36.00, with delivery required within 20 days FOB origin and no variance permitted in quantity. Inspection and acceptance occur at origin, and the shipment must be delivered to the Royal Jordanian Air Force Headquarters in Amman, Jordan, via the designated freight forwarder. Technical and quality requirements are governed by the DLA Master List referenced in RA001, with the revision effective on the solicitation issue date controlling compliance. The solicitation number is SPE4A6-26-T-10CL, with a response deadline of August 5, 2026, and the point of contact is Chinh Le of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
KEYBOARD, DATA ENTRYThe contract solicitation SPE7M5-26-T-356J issued by the Defense Logistics Agency’s Active Devices Division seeks one unit of a data entry keyboard, identified by NSN 5999-01-678-3599 and part number DU-5K-TB-USB, under simplified acquisition procedures. The item must be delivered within 20 days of contract award to the Assault Craft Unit One at Naval Amphibious Base Coronado, San Diego, CA, with FOB Origin terms and destination inspection and acceptance by the Government. Packaging and marking must strictly conform to MIL-STD-2073-1E and MIL-STD-129, including direct bare item marking per RQ017 and adherence to DLA Packaging Requirements (RP001), with no special marking designated. The contract includes specific preservation methods and material codes, and delivery must be shipped via traceable freight, explicitly prohibiting parcel post. Unit pricing on the single line item ranges from $522.00 to $617.76 based on fragmented data, with an estimated total contract value of approximately $15,446, though no option quantities or ceiling values are specified. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses relating to cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous materials labeling, safeguarding of defense information, subcontracting, and compliance with export controls and prohibited suppliers. The offeror must represent as other than a small business and affirmatively disclose if providing covered defense telecommunications equipment under DFARS 252.204-7016, requiring full identification of providers, CAGE codes, and UEI. All submissions are required through the DIBBS portal by August 10, 2026, with payments processed exclusively via Wide Area WorkFlow. The contract is classified as fixed-price, with inspection and acceptance occurring at destination, and all deliverables are subject to compliance with mandatory preservation, packaging, and marking standards, as well as federal regulations on environmental safety and workforce equity.
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThis contract governs the procurement of six power supply units with NSN 6130-01-690-8194 and part number CCP-00575, sourced from Crystal Group, Inc., under solicitation SPE7L7-26-T-4487. The items are to be delivered FOB origin within 161 days of contract award, with no tolerance for quantity variance, and must arrive at the designated receiving warehouse in Tracy, California. All supplies must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. The power supplies must adhere to strict quality and technical specifications referenced from the DLA Master List, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated. Attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively, and manufacturers may choose attribute or variable inspection methods. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the supplies, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier. Covered defense information provisions apply as this is designated a critical application item. The units must be palletized and shipped in accordance with DLA packaging directives, with transportation governed by DLAD procedural notes C19 and C20. The original delivery deadline was January 12, 2027, with a requested ship date of January 19, 2027, and inspection and acceptance are to occur at the destination. The unit of issue is each, with a total contract value of six units, and compliance with all referenced technical, quality, and regulatory standards is mandatory without exception.
DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
INSULATOR, BUSHINGThe contract specifies the procurement of 863 units of an insulator, bushing, identified by NSN 5970010872610 and governed by the military specification MIL-I-49466 Revision dated 12/03/2014. This is classified as a commercial item and requires full compliance with DLA packaging standards, specifically MIL-STD-2073-1E, with packaging code U, unit container A1, and intermediate container E5. All items must be marked per MIL-STD-129 with a two-dimensional Data Matrix barcode, and no special marking is required. The insulators must be shipped FOB origin with delivery to New Cumberland, Pennsylvania, within 164 days of order, with inspection and acceptance occurring at the destination. Strict mercury restrictions apply: no intentional addition or direct contact with mercury or mercury compounds is permitted except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, and portable mercury-containing devices must have shock-proof construction and a secondary containment boundary as defined by NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise directed, and all non-conforming items require removal of government identification prior to return. The contractor must comply with FAR and DFARS clauses governing safeguarding of government information, cyber incident reporting, payment submissions via WAWF, prohibition of hexavalent chromium and hazardous materials, export controls, and restrictions on arbitration agreements. Packaging and transportation must align with DLA requirements and DFARS 252.247-7023, which governs ocean transportation. All representations required under SAM.gov, including UEI and CAGE codes, socioeconomic status, and compliance with defense telecommunications restrictions, are mandatory but not completed in the solicitation phase. The contract is fixed-price, administered by the ASC Commodities Division under Contracting Officer Angela Boyce, with no options, modifications, or pricing provided in Section B beyond the unit quantity.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 333999
New
DIBBS
Mechanical Equipment Manufacturing – Groove Cleaner UnitThe contract pertains to the fabrication and delivery of a specialized mechanical groove cleaner unit designed for high-demand surface maintenance applications in military or industrial environments. This subcontract calls for the precise engineering and manufacturing of equipment capable of efficiently removing debris, corrosion, or other surface irregularities from grooves in hard surfaces, ensuring operational readiness and integrity of critical infrastructure. The solicitation, issued under NAICS code 333999 for Other Miscellaneous Manufacturing, is managed by the Department of Defense through its Construction & Equipment Manu & Con organization, indicating its strategic importance to defense maintenance operations. Responses are due by August 4, 2026, and the opportunity was posted on July 28, 2026, providing a seven-day window for qualified contractors to submit proposals. While specific performance locations and point of contact details are not provided, the equipment must meet stringent military or industrial standards for durability, precision, and reliability under harsh conditions. The absence of a set-aside designation suggests this opportunity is open to all eligible contractors regardless of size or certification status, and the DIBBS platform serves as the official portal for submission and further documentation.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
FRAME, JACK CASTERThe contract is for the procurement of two FRAME, JACK CASTER units under solicitation SPE8EF-26-Q-0153, with a total estimated value of $10.00. The item, identified by NSN 1730-00-308-3870, must be manufactured in strict compliance with specified material standards including ASTM A108 Grade 1020, ASTM A27/A27M Grade 60-30 Class 1, and ASTM B633 Type 3 SC4, with corresponding federal specifications QQ-S-637, QQ-S-634, QQ-S-681, and QQ-Z-325. Welding must adhere to SAE AMS-STD-2219, and all components require permanent physical marking per RQ017. The product is subject to stringent export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, and access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and formal approval from DLA. Packaging must meet ASTM D3951 and DLA RP001 requirements, with labeling conforming to MIL-STD-129, while the DLA Master List of Technical and Quality Requirements supersedes all other referenced standards. Delivery is to be made to a U.S. military installation in Saudi Arabia within 60 days of direction, with FOB Destination terms applying. The solicitation mandates complete compliance with cybersecurity and supply chain security obligations, including CMMC Level 2 certification and adherence to FAR clauses governing safeguarding of covered defense information, prohibitions on Kaspersky, Huawei, ZTE, BitDance, and other restricted entities, as well as Federal Acquisition Supply Chain Security Act requirements. Contractors must comply with whistleblower protections, labor standards, and anti-trafficking provisions, including minimum wage and paid sick leave mandates. Invoicing must occur electronically through WAWF using the appropriate document type, and all deliveries are subject to government inspection at the destination with a zero-defect acceptance standard per MIL-STD-1916. Offerors must submit electronic proposals via the DLA eProcurement portal by August 7, 2026, and provide necessary representations regarding entity identification, size status, and compliance with prohibited equipment clauses, although specific entity details are not provided in the solicitation. The contract
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
TWIST-LOCK ASSEMBLYThe contract pertains to the procurement of 16 units of a TWIST-LOCK ASSEMBLY, identified by NSN 1730-01-349-4439 and part number TWL2716-1, with a required delivery within 174 days of contract award. Delivery is to be made FOB origin, with inspection and acceptance occurring at the destination, and no variance is permitted in quantity. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA Packaging Requirements for Procurement, including palletization standards, and all markings must reflect the specified Unit of Issue and Quantity per Unit Pack. The item is subject to the DLA Master List of Technical and Quality Requirements, which override any conflicting standards, and no asbestos as defined by FED-STD-313 is allowed. Mercury or mercury-containing compounds are prohibited unless part of functional components such as batteries, fluorescent lamps, sensors, or weapons systems specified by NAVSEA, and portable mercury-containing devices must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and the contract involves Covered Defense Information subject to associated safeguards. The solicitation is a total small business set-aside under NAICS code 336413, with responses due by August 10, 2026, and delivery must reach the DLA Distribution facility in New Cumberland, Pennsylvania, following all specified transportation and shipping procedures.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details