Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Supply and Delivery of Ergonomic Task Chairs (Adjustable)

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 337127
New
Federal
7195-- DOMICILLARY MENTAL HEALTH RESIDENT FURNITURE
Solicitation # 36C24726Q0746
This solicitation, issued as an RFQ under the Revolutionary FAR Overhaul, is a service-disabled veteran-owned small business (SDVOSB) set-aside for the procurement of behavioral health furniture and installation services for the Fort McPherson VA Clinic in Atlanta, Georgia. All offerors must be actively registered in SAM.gov and verified through the SBA’s VetCert program at the time of quote submission and award. The NAICS code is 337127 with a 500-employee small business size standard, and the procurement falls under FSC/PSC 7195. The requirement includes 59 single platform beds with open side storage, 59 matching behavioral health mattresses, two double XL platform beds and mattresses, 39 behavioral health desks, 34 dressers, 21 double wardrobes, and six single wardrobes—all in Warm Sand or Dolce Vita finishes—along with full delivery and installation services. All furniture must meet strict behavioral health safety standards, including anti-ligature design, tamper-resistant hardware, non-porous and bleach-compatible surfaces, structural durability equivalent to BIFMA standards, and the ability to be securely anchored. Substitutions require prior approval from the VA Interior Designer and must match or exceed all specified technical characteristics. The contract demands a comprehensive project management approach, requiring a dedicated Project Manager to oversee delivery, coordinate installation phasing across six residential wings in Buildings 130 and 131, and ensure all work occurs after regular business hours to avoid disrupting residents. Installation must be completed within 180 days of Notice to Proceed, with all products delivered no later than December 31, 2026. The contractor is responsible for protecting VA property, providing floor protection, removing all packaging and debris daily, and repairing or replacing any damaged or defective items within four weeks of installation. Proposal submissions must be in PDF or Excel format, sent via email to LaTerrica.Sewell@va.gov by August 10, 2026, and include complete technical documentation such as cut sheets, bill of materials tagged by CLIN, sustainability certifications, and a self-certifying statement of schedule compliance. Pricing must be submitted separately for labor and materials, with unit prices limited to two decimal places. Awards will be made based on best value, evaluating technical capability and price reasonableness under simplified acquisition procedures, with full compliance to FAR 52.212-1, -2,
247-NETWORK Contract Office 7 (36C247)

POSTED

3 days ago

DEADLINE

in 14 days
NAICS: 337127
New
SLED
IFB #RW2621005 Lounge Seating Kits
Solicitation # 0000039991
The State of California is inviting bids for Lounge Seating Kits under Solicitation Number 0000039991, issued as IFB #RW2621005, with a closing date of August 26, 2026, at 3:00 PM. The procurement is managed by the California Correctional Training and Rehabilitation Authority for furniture needs at the Correctional Training Facility in Soledad, CA, with the place of performance designated as West Sacramento, 95605. All responses must be submitted by the deadline, and vendors are advised to verify registration requirements on the official State of California procurement portal as participation may necessitate prior enrollment. Queries about the bid’s language, requirements, or missing details should be directed to the designated point of contact, Sadaqatullah Sahak, at 916/358-4427 or sadaqatullah.sahak@calctra.ca.gov. The contract is classified as a solicitation with no set-aside designation, and while NAICS code and specific procurement type information are not provided, the offering is intended for institutional use within state correctional facilities. The listed point of contact on Biddingo.com is not the official state representative, and vendors are cautioned that Biddingo.com serves only as an informational aggregator and assumes no responsibility for content accuracy on external sites. To submit a bid or obtain full specifications, interested parties must access the official state solicitation page via the provided link, ensuring compliance with all procedural and technical requirements outlined by the California agency. Any discrepancies or updates in the bid information must be confirmed directly with the originating organization.
State of California

POSTED

3 days ago

DEADLINE

in 16 days
NAICS: 337127
New
International
NFS(Pacific) Seating
Solicitation # W0103-19103199
The Department of National Defence is seeking the purchase, delivery, and installation of office seating—specifically rotary chairs and stools—at CFB Esquimalt in Victoria, British Columbia, under Supply Arrangement E60PQ-120001/H. The requirement is solicited through the General Stream of pre-qualified suppliers, with non-SA holders eligible to bid only if they simultaneously apply for and receive a supply arrangement from the Supply Arrangement Authority; however, contract awards will not be delayed pending such evaluations. All work must be completed and accepted by October 31, 2026, with the contract term extending through October 31, 2027. Deliveries are required under DDP Incoterms® 2020 to the Naden Building NAD092, meaning the contractor assumes all costs and risks until goods are installed at the site. The award will follow a Lowest Price Technically Acceptable (LPTA) methodology, where only offers meeting all mandatory technical, environmental, and compliance requirements are eligible, and the lowest-priced compliant bid receives the award. Offerors must certify compliance with Canadian Content, environmentally preferable packaging standards (requiring reusable, returnable, or recyclable materials), and anti-forced labor provisions, and must submit completed Offer Submission and Declaration Forms. There are no security requirements, no key personnel specifications, and no organizational conflict of interest clauses beyond general Code of Conduct adherence, but contractors must notify Canada within ten days of any change in their place of business to maintain Canadian Supplier status. Invoices must include the contract number, client reference, procurement business number, and certification of delivery and accuracy, and must be submitted electronically. All records must be retained for up to seven years after final payment for audit purposes. Proposals must be emailed to Ila.Jordan@forces.gc.ca by August 7, 2026, using the Government Electronic Tendering Service for amendments and updates, and can be submitted in English or French.
Department of National Defence

POSTED

3 days ago

DEADLINE

in 1 day

AI Contract Overview

Show more

The contract calls for the procurement and installation of 75 adjustable ergonomic task chairs, each with a minimum weight capacity of 275 pounds, to be delivered and set up at a location in Nova Scotia. The requirement includes full post-installation cleanup and the correction of any deficiencies discovered after setup, with all corrections to be completed within three business days of notification. This is a subcontract under the Department of National Defence, Government of Canada, and is classified under NAICS code 337127, which pertains to seating furniture manufacturing. The solicitation was posted on June 24, 2026, with responses due by 5:00 PM on July 2, 2026, and is accessible through the Canada Buys portal.

General Info

Procure and install 75 ergonomic chairs with 275 lb capacity in Nova Scotia, including cleanup and 3-day deficiency corrections.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

337127 - Institutional Furniture ManufacturingView NAICS

Place of Performance

Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Procurement and installation of 75 adjustable ergonomic task chairs with weight capacity of at least 275 lbs. Includes post-installation site cleanup and correction of deficiencies within 3 business days.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 561410
New
International
Publications Management
Solicitation # W8485-26SH01/A
The Department of National Defence is seeking comprehensive Publication Management Services and Interactive Electronic Technical Manual Services to support approximately 1,600 technical publications under the Directorate of Aerospace Equipment Program Management (Fighters and Trainers). The scope includes the full lifecycle management of these publications, from creation and amendment to delivery and maintenance, with a primary focus on S1000D-compliant XML-based IETMs and PDF formats. The work requires strict adherence to Canadian federal standards including D-LM-008-022/SG-000 for packaging, D-LM-008-002/SF-001 for marking, and S1000D-B6865-01000-00 Issue 4.1 for technical documentation formatting, as well as ISO 9001:2008 and internal DND quality procedures. All deliverables must be submitted electronically to designated DND authorities and include updated distribution lists, change registers, business rules, DVD media with labeling, and compliance certificates, with final acceptance vested solely in the Government of Canada within 45 calendar days of submission. The contract will be awarded using a Lowest Price Technically Acceptable approach, where bidders must first meet all mandatory technical criteria outlined in Annex C—such as PDF export capability, IETM navigation, alphanumeric ordering by NDID, and change tracking—before financial evaluation is conducted. No numerical weights are assigned, and only technically acceptable offers proceed to price comparison. The contract runs from award through September 30, 2030, with no renewal options, and is structured as a Firm Fixed Price arrangement based on defined task rates. All bidders must hold a SECRET-level facility security clearance and ensure all personnel with access to classified information have equivalent personnel clearances, in compliance with the Contract Security Program and Annex E. Contractors must also be registered in the Controlled Goods Program and adhere to Employment Equity Act requirements if they employ 100 or more Canadians, with additional integrity declarations mandatory for any criminal convictions. Electronic submissions via epost Connect are required and take precedence over paper submissions, which must comply with strict environmental standards including recycled content, duplex printing, and no plastic binding. No contract value is disclosed as pricing in Annex D consists solely of evaluation estimates, and no CLIN or SLIN pricing data is provided in the solicitation.
Document Preparation Services

POSTED

2 days ago

DEADLINE

in 18 days
View Details
NAICS: 334511
New
International
Alternate Product Substitution & Technical Compliance SupportThe contract requires the submission of equivalent programmable lead beacon (PLB) models that match the technical specifications and performance of the ACR Resqlink 400, along with comprehensive documentation proving full technical equivalency. This includes detailed performance data, alternate part numbers for the proposed replacements, and a justified rationale for each substitution that demonstrates identical or superior functionality, reliability, and compliance with operational requirements. All submitted materials must establish that the alternative models meet or exceed the original device’s capabilities in all critical areas such as signal transmission, battery life, durability, and regulatory certification. The opportunity is issued under the Department of National Defence of the Government of Canada and is classified as a subcontract with a NAICS code of 334511, indicating it pertains to communications equipment manufacturing. The deadline for responses is September 2, 2026, and the place of performance is in Canada. Although no specific point of contact or office address is provided, the tender is accessible through the Canada Buys portal and is open to suppliers capable of fulfilling the technical and documentation requirements without reliance on the original ACR product. The substitution must be fully defensible from a procurement, safety, and operational standpoint to ensure seamless integration into existing systems.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

3 days ago

DEADLINE

in 23 days
View Details
NAICS: 334511
New
International
Supply of 406 MHz Personal Locator Beacons (PLBs)The contract seeks the procurement and delivery of 35 units of ACR Resqlink 400 or equivalent 406 MHz personal locator beacons that meet COSPAS-SARSAT international distress signaling standards. Each unit must be equipped with GPS and Galileo global navigation satellite system capabilities to ensure accurate location transmission during emergency situations, and must support dual-frequency signaling for enhanced signal reliability and global coverage. The beacons are required to be environmentally durable, capable of withstanding harsh outdoor and marine conditions to ensure operational readiness in extreme climates and rugged terrain. All devices must comply with current international maritime and aviation safety protocols and be ready for immediate deployment upon delivery. The contract is issued as a subcontract under the Department of National Defence, Government of Canada, with a posting date of August 7, 2026, and a submission deadline of September 2, 2026. The place of performance is designated as Canada, indicating that all beacons must be delivered to Canadian government facilities or designated operational locations within the country. The North American Industry Classification System code 334511 applies, identifying the procurement as related to the manufacturing of navigational, measuring, electromedical, and control instruments. There is no set-aside designation specified, meaning the contract is open to all eligible suppliers without preference for small businesses or other categories. The procurement is managed through Canada Buys, the federal government’s electronic tendering system.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

3 days ago

DEADLINE

in 23 days
View Details
NAICS: 334118
New
International
User Interface and On-Site Display DevelopmentThe contract seeks the design and supply of a ruggedized, sunlight-readable on-device display specifically engineered for real-time visualization of weather parameters in demanding field conditions. The system must reliably operate in outdoor environments where visibility under direct sunlight, temperature extremes, moisture, dust, and physical shocks are common, ensuring that personnel can access critical meteorological data without interruption. The display must integrate seamlessly into existing field equipment, maintain high readability under all lighting conditions, and deliver accurate, low-latency updates of weather metrics with minimal power consumption. This subcontract, issued by the Department of National Defence under the Government of Canada, is focused on enhancing operational readiness in the National Capital Region and beyond by equipping field teams with hardened, mission-critical display technology. The solicitation, posted on August 7, 2026, requires proposals to be submitted by August 26, 2026, and is categorized under NAICS code 334118 for other computer equipment manufacturing. The delivery location is tied to Canada’s National Capital Region, and while specific technical requirements are not detailed here, the emphasis is on durability, real-time performance, and suitability for military or defense-related field operations.
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 16 days
View Details
NAICS: 811212
New
International
In-Service Support and Technical Field SupportThe contract pertains to ongoing technical support, maintenance, troubleshooting, and field repair services for deployed DWOS units throughout its entire lifecycle, ensuring continuous operational readiness and system reliability. Services are expected to be delivered in support of government assets stationed within Canada’s National Capital Region, with the contractor responsible for rapid response, on-site repairs, preventive maintenance, and technical resolution of system anomalies. All work must align with the standards and protocols established by the Department of National Defence, Government of Canada, and must be performed in a timely and efficient manner to minimize system downtime. This is a subcontract opportunity under NAICS code 811212, with a posted date of August 7, 2026, and a response deadline of August 26, 2026. The contract is not subject to any set-aside provisions, and the place of performance is confined to Canada’s National Capital Region. Contractors must be prepared to provide comprehensive on-the-ground support, including travel and logistics for field technicians, and must demonstrate the capability to handle complex technical issues across a distributed operational environment. All services are critical to sustaining the functionality and performance of DWOS units in support of national defense obligations.
Computer and Office Machine Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 16 days
View Details